Download or read book A LOW COST AND HIGH QUALITY SOLID FUEL FROM BIOMASS AND COAL FINES written by and published by . This book was released on 2001 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of biomass wastes as fuels in existing boilers would reduce greenhouse gas emissions, SO2 and NOx emissions, while beneficially utilizing wastes. However, the use of biomass has been limited by its low energy content and density, high moisture content, inconsistent configuration and decay characteristics. If biomass is upgraded by conventional methods, the cost of the fuel becomes prohibitive. Altex has identified a process, called the Altex Fuel Pellet (AFP) process, that utilizes a mixture of biomass wastes, including municipal biosolids, and some coal fines, to produce a strong, high energy content, good burning and weather resistant fuel pellet, that is lower in cost than coal. This cost benefit is primarily derived from fees that are collected for accepting municipal biosolids. Besides low cost, the process is also flexible and can incorporate several biomass materials of interest The work reported on herein showed the technical and economic feasibility of the AFP process. Low-cost sawdust wood waste and light fractions of municipal wastes were selected as key biomass wastes to be combined with biosolids and coal fines to produce AFP pellets. The process combines steps of dewatering, pellet extrusion, drying and weatherizing. Prior to pilot-scale tests, bench-scale test equipment was used to produce limited quantities of pellets for characterization. These tests showed which pellet formulations had a high potential. Pilot-scale tests then showed that extremely robust pellets could be produced that have high energy content, good density and adequate weatherability. It was concluded that these pellets could be handled, stored and transported using equipment similar to that used for coal. Tests showed that AFP pellets have a high combustion rate when burned in a stoker type systems. While NOx emissions under stoker type firing conditions was high, a simple air staging approach reduced emissions to below that for coal. In pulverized-fuel-fired tests it was found that the ground pellets could be used as an effective NOx control agent for pulverized-coal-fired systems. NOx emissions reductions up to 63% were recorded, when using AFP as a NOx control agent. In addition to performance benefits, economic analyses showed the good economic benefits of AFP fuel. Using equipment manufacturer inputs, and reasonable values for biomass, biosolids and coal fines costs, it was determined that an AFP plant would have good profitability. For cases where biosolids contents were in the range of 50%, the after tax Internal Rates of Return were in the range of 40% to 50%. These are very attractive returns. Besides the baseline analysis for the various AFP formulations tested at pilot scale, sensitivity analysis showed the impact of important parameters on return. From results, it was clear that returns are excellent for a range of parameters that could be expected in practice. Importantly, these good returns are achieved even without incentives related to the emissions control benefits of biomass.

Download or read book Materials Components in Fossil Energy Applications written by and published by . This book was released on with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book PRODUCTION OF NEW BIOMASS written by and published by . This book was released on 2001 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: CQ Inc. and its team members (ALSTOM Power Inc., Bliss Industries, McFadden Machine Company, and industry advisors from coal-burning utilities, equipment manufacturers, and the pellet fuels industry) addressed the objectives of the Department of Energy and industry to produce economical, new solid fuels from coal, biomass, and waste materials that reduce emissions from coal-fired boilers. This project builds on the team's commercial experience in composite fuels for energy production. The electric utility industry is interested in the use of biomass and wastes as fuel to reduce both emissions and fuel costs. In addition to these benefits, utilities also recognize the business advantage of consuming the waste byproducts of customers both to retain customers and to improve the public image of the industry. Unfortunately, biomass and waste byproducts can be troublesome fuels because of low bulk density, high moisture content, variable composition, handling and feeding problems, and inadequate information about combustion and emissions characteristics. Current methods of co-firing biomass and wastes either use a separate fuel receiving, storage, and boiler feed system, or mass burn the biomass by simply mixing it with coal on the storage pile. For biomass or biomass-containing composite fuels to be extensively used in the U.S., especially in the steam market, a lower cost method of producing these fuels must be developed that includes both moisture reduction and pelletization or agglomeration for necessary fuel density and ease of handling. Further, this method of fuel production must be applicable to a variety of combinations of biomass, wastes, and coal; economically competitive with current fuels; and provide environmental benefits compared with coal. Notable accomplishments from the work performed in Phase I of this project include the development of three standard fuel formulations from mixtures of coal fines, biomass, and waste materials that can be used in existing boilers, evaluation of these composite fuels to determine their applicability to the major combustor types, development of preliminary designs and economic projections for commercial facilities producing up to 200,000 tons per year of biomass/waste-containing fuels, and the development of dewatering technologies to reduce the moisture content of high-moisture biomass and waste materials during the pelletization process.

Download or read book XVIII International Coal Preparation Congress written by Vladimir Litvinenko and published by Springer. This book was released on 2016-10-21 with total page 1165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers technical and scientific articles by leading experts from 15 countries and originally presented at the world’s most prestigious forum on coal preparation: the XVIII International Coal Preparation Congress. Topics addressed include: the mineral resources basis of the coal industry; problems and prospects of development in the coal industry; crushing, grinding, screening and classification processes used at sorting plants; coal processing and briquette factories; review of plant designs and operations used around the world; new developments in dense-medium separators, water-based separation processes, froth flotation and dewatering; technologies and equipment for the dry separation of coal; coal deep processing technologies and equipment; energy generation as an area of coal deep processing; and simulation and optimization software for separation processes.In general, the future of coal around the world is defined by its competitiveness. As the cheapest form of fuel (comparatively speaking), coal undoubtedly continues to be in high demand around the world.

Download or read book The Environmental Management of Low Grade Fuels written by Mary MacDonald and published by Routledge. This book was released on 2013-11-05 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The negative environmental impacts of energy use, particularly soil and water pollution, continue to present serious policy dilemmas. The release of emissions and effluents and the build-up of solid waste throughout the fuel cycle have disruptive effects on natural habitats and human health. Further, fuel combustion can result in the emission of carbon dioxide, ozone, methane and nitrogen dioxide the 'greenhouse gases' which have been linked to climate change. The safe and sustainable use of energy has become an important issue in the wider environmental debate. In this report, researchers from the Stockholm Environment Institute explore the issues raised by the use of low-grade fuels such as peat, wood, biomass, lignite, oil shale and municipal and industrial wastes. The present strategies and policy options for all stages of the process, from mining and transport to processing and combustion. With those who would like to learn more about these fuels in mind, the material is presented clearly, and discussions of environmental protection measures are given in table form throughout the ease of reference. A directory of environmental guidelines, regulations and standards is given in an appendix. While a high calorific value fuels remain the most significant source of energy in many countries, economic and other constraints on the use of these fuels may result in more nations turning to low-grade sources of energy to operate their industrial or transportation sectors. The greater potential for environmental degradation that accompanies the use of low-grade fuels means that it is crucial that environmentally sound methods for their management, such as those presented here, be more widely available. The Environmental Management of Low-Grade Fuels will be valuable for industry specialists, policy makers, students and all who are concerned with the life cycle of these materials. Mary MacDonald is an affiliated scientist, and Michael Chadwick is a former director, at the Stockholm Environment Institute. Garegin Aslanian is a senior associate with the Institute for High Temperature Research in Moscow. Originally published in 1996

Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Earthscan. This book was released on 2012-05-16 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.

Download or read book Fuel Flexible Energy Generation written by John Oakey and published by Woodhead Publishing. This book was released on 2015-12-08 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Flexible Energy Generation: Solid, Liquid and Gaseous Fuels provides updated information on flexible fuel energy generation, the process by which one or more fuels can be combusted in the same boiler or turbine to generate power. By adapting or building boilers and turbines to accept multiple fuel sources, they can be co-fired with biomass and waste derived fuels, allowing a reduction in carbon output, thus providing cleaner energy. Fuel flexibility is becoming more important in a world of diminishing fossil fuel stocks. Many countries are investing in the development of more efficient fuel flexible boilers and turbines, and their use is becoming more prevalent in industry as well. This book provides comprehensive coverage of flexible fuel energy generation across all potential fuel types, and was written by a selection of experts in the field who discuss the types of fuels which can be used in fuel flexible energy generation, from solid fuels to biomass fuels, the preparation of fuels to be used in fuel flexible operations, that includes their handling and transport, and combustion and conversion technologies with chapters ranging from large-scale coal gasification to technology options and plant design issues. Focuses on fuel flexibility across all potential fuel types Includes thorough treatment of the technology being developed to allow for fuel flexibility Written by leading experts in the field Provides an essential text for R&D managers in firms which produce boilers or turbines, those who work in the fuel industry, and academics working in engineering departments on energy generation

Download or read book Densified Biomass written by Thomas B. Reed and published by . This book was released on 1979 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The 5 year Outlook on Science and Technology written by and published by . This book was released on 1981 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pollutants Generated by the Combustion of Solid Biomass Fuels written by Jenny M Jones and published by Springer. This book was released on 2014-11-04 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the pollutants formed by the combustion of solid biomass fuels. The availability and potential use of solid biofuels is first discussed because this is the key to the development of biomass as a source of energy. This is followed by details of the methods used for characterisation of biomass and their classification. The various steps in the combustion mechanisms are given together with a compilation of the kinetic data. The chemical mechanisms for the formation of the pollutants: NOx, smoke and unburned hydrocarbons, SOx, Cl compounds, and particulate metal aerosols are given in detail. Combustion kinetics required for the application for design purposes are given. Examples are given of emission levels of a range different types of combustion equipment. Data is given of NOx, particulates and other pollutant arising from combustion of different fuels in fixed bed combustion, fluidized bed combustion and pulverised biomass combustion and co-firing. Modeling methods including computational fluid dynamics for the various pollutants are outlined. The consequential issues arising from the wide scale use of biomass and future trends are then discussed. In particular the role of carbon capture and storage in large biomass combustion plants is considered as well as the opportunity of reducing the concentration of atmospheric concentration of carbon dioxide.

Download or read book Advanced Solid Biofuel Production Via the Integration of Torrefaction and Densification and Its Characterization for the Direct Coal Substitution in Energy Intensive Industries written by Peter George Gaudet and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The greatest political, scientific, and engineering challenge of the 21st century is finding a viable solution to limit anthropogenic greenhouse gas emissions (CO2) to curb the effects of global climate change. All sectors of society need to contribute to alleviate this problem, but industrial operations must play a significant leadership role. Some of these industries include: metallurgy, cement, power, agriculture and forestry. In particular, the iron/steel, cement, and power generation industries use coal on account of its high energy density among solid fuels. Coal combustion yields 720 tonne CO2/GWh, and produces fine particulates, sulphur and nitrous oxides, along with excess CO2 contributing to climate change. In comparison, biomass (such as agricultural and forestry residues) has a solid fuel rating of 25-100 tonne CO2/GWh; therefore, biomass fuels are considered more sustainable since the living biomass consumed CO2 in the early part of its life cycle. However, biomass has significant industrial shortcomings for its use as fuel at large scale, including low energy content, density, and hydrophobicity relative to coal. In short, biomass fuels cannot be substituted without major infrastructure changes which add economic penalties that industry is currently unwilling to absorb. Biomass upgrading routes were considered in this thesis. These include densification, torrefaction, and integrated torrefaction and densification (ITD). The first half of the methodology involved converting woody biomass (willow residue and poplar bark), agricultural residue (switchgrass plants), and pulp mill waste via a single pellet/briquette press at different densification temperatures and pressures. The second half of the methodology involved product characterization of each batch of pellets and briquettes. In this work, pellets and briquettes were tested for physical characteristics (density and durability), chemical differences (energy content and hydrophobicity), and transport phenomena characteristics (drying profiles). First, results showed that extrusion of torrefied biomass at 300°C with an estimated pressure of 10 MPa creates partially formed pellets from agricultural residues. Using the concept of ITD (temperature range 220-325°C and pressure range 40 and 215 MPa), the density was found to be 1000-1250 kg/m3 for pellets and briquettes. The degree of compression from the loose biomass was on the order of 3-10 which corresponds with theoretical expectations. Material density increased with increasing pressure. The solid yield of pellets and briquettes decreased with increasing temperature, and results aligned with micro-scale thermogravimetric analysis. The larger ITD briquettes (produced at T = 325°C, P = 40 MPa) were evaluated for calorific value and found to fall in the lignite classification (O/C 0.4 and H/C

Download or read book Solid Biofuels for Energy written by Panagiotis Grammelis and published by Springer Science & Business Media. This book was released on 2010-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels are widely used for electricity generation and heating, creating greenhouse gas emissions and other toxic pollutants, which should be minimised according to the most recent environmental legislation. The utilisation of solid fuels with biogenic origin could contribute to the minimisation of these emissions. Solid Biofuels for Energy presents the current status of the engineering disciplines in this specific area, providing an improved background on the energy exploitation options of solid biomass. Within this framework, all thematic priorities related to the solid bioenergy potential and standardisation, commercialised and emerging energy technologies, and quality of solid residues are presented. Special attention has been given to biomass co-firing with coal, since it has the highest potential for commercial application, while combustion and gasification are more promising for units of medium to small scale. This strong practical focus is evident throughout the book, particularly in discussions of: • international standards for solid biofuel specifications; • supply, cost and sustainability of solid biofuels; • technical issues and non-technical barriers in biomass/coal co-firing; and • biomass combustion and gasification characteristics. Solid Biofuels for Energy is an informative reference, written for researchers and postgraduate students working in the field of biomass. It can also be a useful guide for chemical and mechanical engineers, involved in the environment and energy production sectors.

Download or read book Coal Power Systems Strategic Plan Multi year Program Plans written by United States. Office of Fossil Energy and published by DIANE Publishing. This book was released on 1999 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.

Download or read book Progressive Thermochemical Biorefining Technologies written by Sonil Nanda and published by CRC Press. This book was released on 2021-09-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering the deleterious impacts of fossil fuels on the environmental and natural ecosystems, it has become imperative to make a paradigm shift toward renewable fuels, chemicals, and materials. The exhaustive everyday usage of fossil fuels and processed petrochemical products are the leading causes for the increase in greenhouse gas emissions, global warming, climate changes, acid rain, ozone layer depletion, pollution of air, water, and soil as well as for the accumulation of nonbiodegradable materials in the soil and oceans. On the contrary, biofuels, biochemicals, and biomaterials derived from renewable wastes such as nonedible plant biomass (e.g., agricultural and forestry biomass), energy crops, microalgae, municipal solid waste, sewage sludge, and other biogenic residues seem to be carbon neutral. Therefore, the global interest in biorefining technologies, especially thermochemical and biological conversion processes, is gaining momentum in academic and industrial perspectives. Progressive Thermochemical Biorefining Technologies offers all-inclusive coverage of the most crucial topics as follows: State-of-the-art information on the production and utilization of biofuels through thermochemical biorefining technologies Conversion of waste biomass through pyrolysis, liquefaction, torrefaction, carbonization, gasification, reforming, and other clean technologies Waste-to-energy/chemical generation Fuel upgrading technologies Techno-economic analysis and life-cycle assessment of biorefining processes Specifically designed to be instantly applicable, this volume serves as a reference book for undergraduate and graduate students, scientific investigators, and research scholars working in the areas relating to energy and fuels.

Download or read book Conversion And Utilization Of Waste Materials written by M.Rashid Khan and published by Taylor & Francis. This book was released on 2023-01-13 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text identifies the problems and opportunities of converting wastes into useful materials or fuels. Chapters cover such issues as waste Utilization And Recycling; Plastics, Polymers, Tyres And Automotive wastes; and the potential usage of coal conversion by-products.

Download or read book Energy Transformation towards Sustainability written by Manuela Tvaronaciene and published by Elsevier. This book was released on 2019-10-21 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Transformation towards Sustainability explores how researchers, businesses and policymakers can explore and usefully improve energy systems and energy consumption behavior, both to reflect the reality of climate change and related environmental degradation and to adapt to the expanding periphery of renewable energy technologies. It introduces the reader to a suite of potential policy pathways to the necessary transformation in societal energy consumption, usage and behavior. Solutions discussed include energy efficiency, energy security, the role of political leadership, green public policy, and the transition to renewable energy sources. International contributions address the range and depth of current research from a position of advocacy for ‘energy stewardship’ as the driver of this transformation. Case studies illustrate the range of various countries to diminish energy use. Finally, policy avenues are covered in depth. Reviews the interrelationship between economic growth, energy consumption and climate change Uses a wide variety of case studies to support practical implementation across national energy systems Highlights a wide spectrum of urgent issues, including threats related to energy use and secure and sustainable development Contains contributions that reflect a breadth and depth of scholarship from international backgrounds