Download or read book A Line and Load Independent Zero Voltage Switching Dc dc Full Bridge Converter Topology written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DC DC Converter Topologies written by Gerry Moschopoulos and published by John Wiley & Sons. This book was released on 2024-01-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive look at DC-DC converters and advanced power converter topologies for all skills levels As it can be rare for source voltage to meet the requirements of a Direct Current (DC) load, DC-DC converters are essential to access service. DC-DC power converters employ power semiconductor devices (like MOSFETs and IGBTs) as switches and passive elements such as capacitors, inductors, and transformers to alter the voltage provided by a DC source into the necessary DC voltage as is required by a DC load. This source can be a battery, solar panels, fuel cells, or a DC bus voltage fed by rectified AC utility voltage. As the many components of DC-DC converters can be differently arranged into circuit structures called topologies, there are as many possible circuit topologies as there are possible combinations of circuit elements. Focusing on DC-DC switch-mode power converters ranging from 50 W to 10kW, DC-DC Converter Topologies provides a survey of all converter topology types within this power range. General principles are described for each topology type using a representative converter as an example. Variations that can be found that differ from the example are then examined, with a helpful discussion of comparisons when relevant. A broad range of topics is covered within the book, from simple, low-power converters to complex, high-power converters and everywhere in between. DC-DC Converter Topologies readers will also find: A detailed discussion of four key DC-DC converter topologies Description of isolated two-switch pulse-width modulated (PWM) topologies including push-pull, half-bridge, and interleaved converters An exploration of high-gain converters such as coupled inductors, voltage multipliers, and switched capacitor converters This book provides the tools so that a non-expert will be equipped to deal with the vast array of DC-DC converters that presently exist. As such, DC-DC Converter Topologies is a useful reference for electrical engineers, professors, and graduate students studying in the field.
Download or read book New Topologies and Modulation Schemes for Soft Switching Isolated DC DC Converters written by Zhiqiang Guo and published by Springer Nature. This book was released on 2019-09-20 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a series of new topologies and modulation schemes for soft-switching in isolated DC–DC converters. Providing detailed analyses and design procedures for converters used in a broad range of applications, it offers a wealth of engineering insights for researchers and students in the field of power electronics, as well as stimulating new ideas for future research.
Download or read book Analysis and Design of an Auxiliary Commutated Full Bridge DC DC Converter for Low Voltage and High Current Applications written by Dheeraj K. Jain and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by Margret Schneider. This book was released on 2005 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Zero Voltage Switching Flyback and Forward Converter Topologies written by Youhao Xi and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Commutation Isolated DC DC Converters written by Ivo Barbi and published by Springer. This book was released on 2018-08-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operation and analysis of soft-commutated isolated DC–DC converters used in the design of high efficiency and high power density equipment. It explains the basic principles behind first- and second-order circuits with power switches to enable readers to understand the importance of these converters in high efficiency and high power density power supply design for residential, commercial, industrial and medical use as well as in aerospace equipment. With each chapter featuring a different power converter topology, the book covers the most important resonant converters, including series resonant converters; resonant LLC converters; soft commutation pulse width modulation converters; zero voltage switching; and zero current switching. Each topic is presented with full analysis, a showcase of the power stages of the converters, exercises and their solutions as well as simulation results, which mainly focus on the commutation analysis and output characteristic. This book is a valuable source of information for professionals working in power electronics, power conversion and design of high efficiency and high power density DC–DC converters and switch mode power supplies. The book also serves as a point of reference for engineers responsible for development projects and equipment in companies and research centers and a text for advanced students.
Download or read book Design and Evaluation of a Reconfigurable Stacked Active Bridge Dc dc Converter for Efficient Wide Load range Operation written by Rose A. Abramson and published by . This book was released on 2016 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the design and implementation of a step-down soft-switched dc-dc converter based on an active bridge topology which overcomes some of the limitations of the conventional dual-active bridge (DAB). The topology comprises a double-stacked bridge inverter, coupled to a recongurable rectifier through a special three-winding leakage transformer. The converter can run in a low power mode that greatly increases light-load efficiency by reducing core loss and extending the zero-voltage switching (ZVS) range. The converter is implemented with a single compact magnetic component, providing power combining, isolation, and energy transfer inductance. The theory of the converter and its various operating modes, referred to in this thesis as the Double-Stacked Active Bridge converter, is also explored, and a magnetic model of the special three-winding transformer and leakage inductance is presented. The target application is for 380 V dc distribution systems for data centers, where the converter operates for the majority of the time at the nominal input voltage, but must have high eciency over a wide load range. A 175 kHz, 300 W, 380 V to 12 V prototype converter achieves 95.9% efficiency at full load, a peak efficiency of 97.0%, an efficiency above 92.7% down to 10% load and an efficiency above 79.8% down to 3.3% load.
Download or read book Proceedings of the 4th International Conference on Electrical and Information Technologies for Rail Transportation EITRT 2019 written by Limin Jia and published by Springer Nature. This book was released on 2020-04-07 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the latest research trends, methods and experimental results in the field of electrical and information technologies for rail transportation, which covers abundant state-of-the-art research theories and ideas. As a vital field of research that is highly relevant to current developments in a number of technological domains, the subjects it covered include intelligent computing, information processing, Communication Technology, Automatic Control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academicians as well as industrial professionals to present the most innovative research and development in the field of rail transportation electrical and information technologies. Engineers and researchers in academia, industry, and the government will also explore an insight view of the solutions that combine ideas from multiple disciplines in this field. The volumes serve as an excellent reference work for researchers and graduate students working on rail transportation, electrical and information technologies.
Download or read book 1998 20th International Telecommunications Energy Conference INTELEC written by IEEE Power Electronics Society and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1998 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Topology Deduction and Control for Dual Active Bridge Converters written by Guo Xu and published by Springer Nature. This book was released on with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Design of Voltage mode Controlled Full bridge DC DC Converter with Current Limit written by Nathaniel R. Smith and published by . This book was released on 2018 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in Direct Current (DC) electrical power systems have enabled new functionality in many, varied applications. Discrete power semiconductor devices are increasing in efficiency, switching frequency, and power density, resulting in greater usage of DC power management and distribution methods, including DC/DC conversion. DC distribution lacks inherent capability to safely and effectively break fault current, particularly in mobile solutions, where larger and slower electromechanical switching devices are not optimal or feasible. One solution is to design a low-energy breaking point into a switching power supply. Simpler converter designs, with a lower number of switching devices, have been modeled and can be functionally utilized for this purpose. However, these designs cannot easily or efficiently provide isolation between the source and the load. A full-bridge DC/DC converter can accomplish this task with galvanic isolation through a transformer. The full-bridge DC/DC converter is fairly complex to analyze with state-space analysis and does not have an existing averaged model. This thesis focuses on developing averaged and small-signal models for the full-bridge DC/DC converter; validating the small-signal averaged models by simulation in SABER circuit simulation software; and using the validated models to design a full-bridge DC/DC converter for simulation in SABER. The converter power stage is designed along with a Type II controller, a comparative current limit, non-Zero-Voltage-Switching gate drives, and a synchronous rectifier. The designed converter is evaluated for closed-loop stability against step changes in input voltage, load current, and reference voltage. The results are provided to show sufficient response of the full-bridge DC/DC converter, given the design parameters. The proposed architecture accommodates future work to reduce DC fault let-through energy
Download or read book Advanced DC DC Power Converters and Switching Converters written by Salvatore Musumeci and published by MDPI. This book was released on 2021-03-30 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, power electronics is an enabling technology in the energy development scenario. Furthermore, power electronics is strictly linked with several fields of technological growth, such as consumer electronics, IT and communications, electrical networks, utilities, industrial drives and robotics, and transportation and automotive sectors. Moreover, the widespread use of power electronics enables cost savings and minimization of losses in several technology applications required for sustainable economic growth. The topologies of DC–DC power converters and switching converters are under continuous development and deserve special attention to highlight the advantages and disadvantages for use increasingly oriented towards green and sustainable development. DC–DC converter topologies are developed in consideration of higher efficiency, reliable control switching strategies, and fault-tolerant configurations. Several types of switching converter topologies are involved in isolated DC–DC converter and nonisolated DC–DC converter solutions operating in hard-switching and soft-switching conditions. Switching converters have applications in a broad range of areas in both low and high power densities. The articles presented in the Special Issue titled "Advanced DC-DC Power Converters and Switching Converters" consolidate the work on the investigation of the switching converter topology considering the technological advances offered by innovative wide-bandgap devices and performance optimization methods in control strategies used.
Download or read book Emerging Innovations in Microwave and Antenna Engineering written by Zbitou, Jamal and published by IGI Global. This book was released on 2018-10-12 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing advancements in electronics creates the possibility of communicating with more people at greater distances. Such an evolution calls for more efficient techniques and designs in radio communications. Emerging Innovations in Microwave and Antenna Engineering provides innovative insights into theoretical studies on propagation and microwave design of passive and active devices. The content within this publication is separated into three sections: the design of antennas, the design of the antennas for the RFID system, and the design of a new structure of microwave amplifier. Highlighting topics including additive manufacturing technology, design application, and performance characteristics, it is designed for engineers, electricians, researchers, students, and professionals, and covers topics centered on modern antenna and microwave circuits design and theory.
Download or read book High Frequency Isolated Bidirectional Dual Active Bridge DC DC Converters with Wide Voltage Gain written by Deshang Sha and published by Springer. This book was released on 2018-05-17 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts, this book is based on recent research findings in high-frequency isolated bidirectional DC-DC converters with wide voltage range. It presents advanced power control methods and new isolated bidirectional DC-DC topologies to improve the performance of isolated bidirectional converters. Providing valuable insights, advanced methods and practical design guides on the DC-DC conversion that can be considered in applications such as microgrid, bidirectional EV chargers, and solid state transformers, it is a valuable resource for researchers, scientists, and engineers in the field of isolated bidirectional DC-DC converters.
Download or read book Entire Load Efficiency and Dynamic Performance Improvements for DC DC Converters written by Osama A. Abdel-Rahman and published by . This book was released on 2007 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demands for DC-DC converters are continuously increasing for the application in many areas such as telecommunications, cellular telephones, networking products, notebook and desktop computers, industrial instrumentation, and automotive electronics. These areas are continually being upgraded with regard to their specifications and power requirements; this puts the emphasis on power electronics and power management. DC-DC converters are able to supply energy at high standards and specifications, which leads DC-DC converters to be continually upgraded in order to fulfill other application requirements such as efficiency, dynamic performance, thermo, noise and size.
Download or read book Pseudo resonant Full Bridge DC DC Converter written by Oliver Desmond Patterson and published by . This book was released on 1987 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
