Download or read book Hybrid Systems written by Robert Grossman and published by Springer. This book was released on 1993 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Hybrid systems are networks of interacting digital and analog devices. Control systems for inherently unstable aircraft and computer aided manufacturing are typical applications for hybrid systems, but due to the rapid development of processor and circuit technology modern cars and consumer electronics use software to control physical processes. The identifying characteristic of hybrid systems is that they incorporate both continuous components governed by differential equations and also digital components - digital computers, sensors, and actuators controlled by programs. This volume of invited refereed papers is inspired by a workshop on the Theory of Hybrid Systems, held at the Technical University, Lyngby, Denmark, in October 1992, and by a prior Hybrid Systems Workshop, held at Cornell University, USA, in June 1991, organized by R.L. Grossman and A. Nerode. Some papers are the final versions of papers presented at these workshops and some are invited papers from other researchers who were not able to attend these workshops."--PUBLISHER'S WEBSITE.
Download or read book Emerging Intelligent Computing Technology and Applications With Aspects of Artificial Intelligence written by De-Shuang Huang and published by Springer. This book was released on 2009-09-19 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Intelligent Computing (ICIC) was formed to provide an annual forum dedicated to the emerging and challenging topics in artificial intelligence, machine learning, bioinformatics, and computational biology, etc. It aims to bring - gether researchers and practitioners from both academia and industry to share ideas, problems, and solutions related to the multifaceted aspects of intelligent computing. ICIC 2009, held in Ulsan, Korea, September 16-19, 2009, constituted the 5th - ternational Conference on Intelligent Computing. It built upon the success of ICIC 2008, ICIC 2007, ICIC 2006, and ICIC 2005 held in Shanghai, Qingdao, Kunming, and Hefei, China, 2008, 2007, 2006, and 2005, respectively. This year, the conference concentrated mainly on the theories and methodologies as well as the emerging applications of intelligent computing. Its aim was to unify the p- ture of contemporary intelligent computing techniques as an integral concept that hi- lights the trends in advanced computational intelligence and bridges theoretical research with applications. Therefore, the theme for this conference was “Emerging Intelligent Computing Technology and Applications.” Papers focusing on this theme were solicited, addressing theories, methodologies, and applications in science and technology.
Download or read book Intelligent Control Systems Using Soft Computing Methodologies written by Ali Zilouchian and published by CRC Press. This book was released on 2001-03-27 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, intelligent control has emerged as one of the most active and fruitful areas of research and development. Until now, however, there has been no comprehensive text that explores the subject with focus on the design and analysis of biological and industrial applications. Intelligent Control Systems Using Soft Computing Methodologies does all that and more. Beginning with an overview of intelligent control methodologies, the contributors present the fundamentals of neural networks, supervised and unsupervised learning, and recurrent networks. They address various implementation issues, then explore design and verification of neural networks for a variety of applications, including medicine, biology, digital signal processing, object recognition, computer networking, desalination technology, and oil refinery and chemical processes. The focus then shifts to fuzzy logic, with a review of the fundamental and theoretical aspects, discussion of implementation issues, and examples of applications, including control of autonomous underwater vehicles, navigation of space vehicles, image processing, robotics, and energy management systems. The book concludes with the integration of genetic algorithms into the paradigm of soft computing methodologies, including several more industrial examples, implementation issues, and open problems and open problems related to intelligent control technology. Suitable as a textbook or a reference, Intelligent Control Systems explores recent advances in the field from both the theoretical and the practical viewpoints. It also integrates intelligent control design methodologies to give designers a set of flexible, robust controllers and provide students with a tool for solving the examples and exercises within the book.
Download or read book Handbook of Hybrid Systems Control written by Jan Lunze and published by Cambridge University Press. This book was released on 2009-10-15 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out core theory and reviews new methods and applications to show how hybrid systems can be modelled and understood.
Download or read book Hybrid Dynamical Systems written by Hai Lin and published by Springer Nature. This book was released on 2021-11-18 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: A graduate-level textbook, Hybrid Dynamical Systems provides an accessible and comprehensive introduction to the theory of hybrid systems. It emphasizes results that are central to a good understanding of the importance and role of such systems. The authors have developed the materials in this book while teaching courses on hybrid systems, cyber-physical systems, and formal methods. This textbook helps students to become familiar with both the major approaches coloring the study of hybrid dynamical systems. The computer science and control systems points of view – emphasizing discrete dynamics and real time, and continuous dynamics with switching, respectively – are each covered in detail. The book shows how the behavior of a system with tightly coupled cyber- (discrete) and physical (continuous) elements can best be understood by a model simultaneously encompassing all the dynamics and their interconnections. The theory presented is of fundamental importance in a wide range of emerging fields from next-generation transportation systems to smart manufacturing.Features of the text include: extensive use of examples to illustrate the main concepts and to provide insights additional to those acquired from the main text; chapter summaries enabling students to assess their progress; end-of-chapter exercises, which test learning as a course proceeds; an instructor’s guide showing how different parts of the book can be exploited for different course requirements; and a solutions manual, freely available for download by instructors adopting the book for their teaching. Access to MATLAB and Stateflow is not required but would be beneficial, especially for exercises in which simulations are a key tool.
Download or read book Intelligent Control Systems written by IEEE Neural Networks Council and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1996 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hybrid Intelligent Systems in Control Pattern Recognition and Medicine written by Oscar Castillo and published by Springer Nature. This book was released on 2019-11-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest advances in fuzzy logic, neural networks and optimization algorithms, as well as their hybrid combinations, and their applications in areas such as: intelligent control and robotics, pattern recognition, medical diagnosis, time series prediction, and optimization of complex problems. The book is divided into five main parts. The first part proposes new concepts and algorithms based on type-1 and type-2 fuzzy logic and their applications; the second explores new concepts and algorithms in neural networks and fuzzy logic applied to recognition. The third part examines the theory and practice of meta-heuristics in various areas of application, while the fourth highlights diverse applications of fuzzy logic, neural networks and hybrid intelligent systems in medical contexts. Finally, the fifth part focuses on applications of fuzzy logic, neural networks and meta-heuristics to robotics problems.
Download or read book Intelligent Control written by Kaushik Das Sharma and published by Springer. This book was released on 2018-08-28 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses systematic designs of stable adaptive fuzzy logic controllers employing hybridizations of Lyapunov strategy-based approaches/H∞ theory-based approaches and contemporary stochastic optimization techniques. The text demonstrates how candidate stochastic optimization techniques like Particle swarm optimization (PSO), harmony search (HS) algorithms, covariance matrix adaptation (CMA) etc. can be utilized in conjunction with the Lyapunov theory/H∞ theory to develop such hybrid control strategies. The goal of developing a series of such hybridization processes is to combine the strengths of both Lyapunov theory/H∞ theory-based local search methods and stochastic optimization-based global search methods, so as to attain superior control algorithms that can simultaneously achieve desired asymptotic performance and provide improved transient responses. The book also demonstrates how these intelligent adaptive control algorithms can be effectively utilized in real-life applications such as in temperature control for air heater systems with transportation delay, vision-based navigation of mobile robots, intelligent control of robot manipulators etc.
Download or read book Intelligent Control written by Nazmul Siddique and published by Springer. This book was released on 2013-11-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Control considers non-traditional modelling and control approaches to nonlinear systems. Fuzzy logic, neural networks and evolutionary computing techniques are the main tools used. The book presents a modular switching fuzzy logic controller where a PD-type fuzzy controller is executed first followed by a PI-type fuzzy controller thus improving the performance of the controller compared with a PID-type fuzzy controller. The advantage of the switching-type fuzzy controller is that it uses one rule-base thus minimises the rule-base during execution. A single rule-base is developed by merging the membership functions for change of error of the PD-type controller and sum of error of the PI-type controller. Membership functions are then optimized using evolutionary algorithms. Since the two fuzzy controllers were executed in series, necessary further tuning of the differential and integral scaling factors of the controller is then performed. Neural-network-based tuning for the scaling parameters of the fuzzy controller is then described and finally an evolutionary algorithm is applied to the neurally-tuned-fuzzy controller in which the sigmoidal function shape of the neural network is determined. The important issue of stability is addressed and the text demonstrates empirically that the developed controller was stable within the operating range. The text concludes with ideas for future research to show the reader the potential for further study in this area. Intelligent Control will be of interest to researchers from engineering and computer science backgrounds working in the intelligent and adaptive control.
Download or read book Soft Computing and Intelligent Systems written by Madan M. Gupta and published by Elsevier. This book was released on 1999-10-28 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of soft computing is emerging from the cutting edge research over the last ten years devoted to fuzzy engineering and genetic algorithms. The subject is being called soft computing and computational intelligence. With acceptance of the research fundamentals in these important areas, the field is expanding into direct applications through engineering and systems science.This book cover the fundamentals of this emerging filed, as well as direct applications and case studies. There is a need for practicing engineers, computer scientists, and system scientists to directly apply "fuzzy" engineering into a wide array of devices and systems.
Download or read book Recent Advances in Intelligent Control Systems written by Wen Yu and published by Springer Science & Business Media. This book was released on 2009-05-27 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Recent Advances in Intelligent Control Systems" gathers contributions from workers around the world and presents them in four categories according to the style of control employed: fuzzy control; neural control; fuzzy neural control; and intelligent control. The contributions illustrate the interdisciplinary antecedents of intelligent control and contrast its results with those of more traditional control methods. A variety of design examples, drawn primarily from robotics and mechatronics but also representing process and production engineering, large civil structures, network flows, and others, provide instances of the application of computational intelligence for control. Presenting state-of-the-art research, this collection will be of benefit to researchers in automatic control, automation, computer science (especially artificial intelligence) and mechatronics while graduate students and practicing control engineers working with intelligent systems will find it a good source of study material.
Download or read book The Handbook of Applied Expert Systems written by Jay Liebowitz and published by CRC Press. This book was released on 2019-07-23 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Applied Expert Systems is a landmark work dedicated solely to this rapidly advancing area of study. Edited by Jay Liebowitz, a professor, author, and consultant known around the world for his work in the field, this authoritative source covers the latest expert system technologies, applications, methodologies, and practices. The book features contributions from more than 40 of the world's foremost expert systems authorities in industry, government, and academia. The Handbook is organized into two major sections. The first section explains expert systems technologies while the second section focuses on applied examples in a wide variety of industries. Key topics covered include fuzzy systems, genetic algorithm development, machine learning, knowledge representation, and much more.
Download or read book Manufacturing Intelligence for Industrial Engineering Methods for System Self Organization Learning and Adaptation written by Zhou, Zude and published by IGI Global. This book was released on 2010-03-31 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book focuses on the latest innovations in the process of manufacturing in engineering"--Provided by publisher.
Download or read book Advances in Intelligent Control Systems and Computer Science written by Loan Dumitrache and published by Springer Science & Business Media. This book was released on 2012-08-22 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conception of real-time control networks taking into account, as an integrating approach, both the specific aspects of information and knowledge processing and the dynamic and energetic particularities of physical processes and of communication networks is representing one of the newest scientific and technological challenges. The new paradigm of Cyber-Physical Systems (CPS) reflects this tendency and will certainly change the evolution of the technology, with major social and economic impact. This book presents significant results in the field of process control and advanced information and knowledge processing, with applications in the fields of robotics, biotechnology, environment, energy, transportation, et al.. It introduces intelligent control concepts and strategies as well as real-time implementation aspects for complex control approaches. One of the sections is dedicated to the complex problem of designing software systems for distributed information processing networks. Problems as complexity and specific instruments for modeling and control are also presented in a group of papers which identifies a large opening towards the new generation of CPS. The book is structured so as to ensure a good equilibrium between conceptual and applicative aspects.
Download or read book Intelligent Systems Design and Applications written by Ajith Abraham and published by Springer. This book was released on 2019-04-13 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent research on Intelligent Systems and Nature Inspired Computing. It presents 212 selected papers from the 18th International Conference on Intelligent Systems Design and Applications (ISDA 2018) and the 10th World Congress on Nature and Biologically Inspired Computing (NaBIC), which was held at VIT University, India. ISDA-NaBIC 2018 was a premier conference in the field of Computational Intelligence and brought together researchers, engineers and practitioners whose work involved intelligent systems and their applications in industry and the “real world.” Including contributions by authors from over 40 countries, the book offers a valuable reference guide for all researchers, students and practitioners in the fields of Computer Science and Engineering.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Research on Advanced Intelligent Control Engineering and Automation written by Azar, Ahmad Taher and published by IGI Global. This book was released on 2014-11-30 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industrial engineering and manufacturing, control of individual processes and systems is crucial to developing a quality final product. Rapid developments in technology are pioneering new techniques of research in control and automation with multi-disciplinary applications in electrical, electronic, chemical, mechanical, aerospace, and instrumentation engineering. The Handbook of Research on Advanced Intelligent Control Engineering and Automation presents the latest research into intelligent control technologies with the goal of advancing knowledge and applications in various domains. This text will serve as a reference book for scientists, engineers, and researchers, as it features many applications of new computational and mathematical tools for solving complicated problems of mathematical modeling, simulation, and control.
