Download or read book A Guide to Performance and Efficiency Assessment of Industrial Equipment written by A. K. DAS, P. K. DAS and published by Notion Press. This book was released on 2024-05-04 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written as a guide to industrial professionals, young engineers, entrepreneurs, and industrialists, and other stakeholders who need a huge energy in process industries in different forms through industrial/process equipment for several human needs. But the performance and efficiency of the equipment are not really taken care of during the operations and processes, which may be due to the dearth of proper knowledge or ignorance. Because of that, a large quantity of energy remains unutilized or wastage causing excess energy costs and subsequently generation of a huge quantity of carbon footprint indirectly which could be saved by proper performance and efficient management, and hence our Nature earth could be sustainable. In this book, the authors highlighted the performance and loss of efficiency of such industrial equipment during running. This attempt has been made to disseminate their sound, in-depth knowledge, and long experience achieved from several industries while working in different fields. The book explains the actual energy needed for performance, the reason for energy loss, and the scope of energy savings which can be possible by proper energy management. This book will also be apprehensible for all students of diploma, undergraduate & post graduate in the stream of electrical, mechanical, chemical, power, and all other engineering courses as a textbook as well as a reference book.
Download or read book Guide to Industrial Assessments for Pollution Prevention and Energy Efficiency written by and published by DIANE Publishing. This book was released on 2001 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Indexes written by United States. Environmental Protection Agency and published by . This book was released on 1983 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Management Systems Sustainable Production and Service Supply Chains written by Vittal Prabhu and published by Springer. This book was released on 2013-09-05 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 414 and 415 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2013, held in University Park, PA, USA, in September 2013. The 133 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 4 parts: sustainable production, sustainable supply chains, sustainable services, and ICT and emerging technologies.
Download or read book Multifactor Productivity Measures written by and published by . This book was released on 1983 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1987 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Register written by and published by . This book was released on 1986-08-12 with total page 1230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oee for Operators written by Productivity Press Development Team and published by Productivity Press. This book was released on 2018-06-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Overall Equipment Effectiveness (OEE) is a crucial measure in TPM that reports on how well equipment is running. It factors three elements ---the time the machine is actually running, the quantity of products the machine is turning out, and the quantity of good output - into a single combined score. Directly addressing those who are best positioned to track and improve the effectiveness of equipment, OEE for Operatorsdefines basic concepts and then provides a systematic explanation of how OEE should be applied to maximize a piece of equipment's productivity and recognize when its efficiency is being compromised. Features
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Competitive Edge written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain competitiveness in the emerging global economy, U.S. manufacturing must rise to new standards of product quality, responsiveness to customers, and process flexibility. This volume presents a concise and well-organized analysis of new research directions to achieve these goals. Five critical areas receive in-depth analysis of present practices, needed improvement, and research priorities: Advanced engineered materials that offer the prospect of better life-cycle performance and other gains. Equipment reliability and maintenance practices for better returns on capital investment. Rapid product realization techniques to speed delivery to the marketplace. Intelligent manufacturing control for improved reliability and greater precision. Building a workforce with the multidisciplinary skills needed for competitiveness. This sound and accessible analysis will be useful to manufacturing engineers and researchers, business executives, and economic and policy analysts.
Download or read book High Performance Buildings written by M.S. Robinson and published by CRC Press. This book was released on 2020-12-17 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a blueprint for action for readers making decisions about how to improve the energy efficiency and performance of new or existing buildings. Suitable for both seasoned veterans and new managers, it takes an objective and orderly approach to what is often a complex, costly, and time-consuming process. The book presents fundamental principles illustrated with case studies. It thoroughly covers the topics in a concise, technically accurate way. The book is designed for architects, engineers, and construction managers.
Download or read book Lean Maintenance written by Javier Girón Blanco and published by Taylor & Francis. This book was released on 2018-01-29 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is about applying Lean manufacturing principles to industrial maintenance in order to improve the efficiency and be able to do more with the same (or less) resources. By industrial maintenance we mean the maintenance that takes place in factories and industrial facilities. The book is the result of multiple improvement projects carried out by the authors in various industrial settings and sectors in the past 10 years.The approach works and can be applied in any industry. It yields results without investment. The book is a step-by-step guide that takes the reader through the maintenance process, from equipment failure to finished repair. In each step of the process, the typical inefficiencies are explained and tools are given to improve the process. The book is meant to be used as a guide in an improvement journey. The improvement approach presented in the book is very close to the shop floor and instructs the reader to engage with all team members in the maintenance department in every step of the process, in order to make the improvements sustainable. If one looks at the main market indexes, between one third and one half of companies on those indexes belong to the industrial sector: automotive, power generation, basic materials, chemicals, consumer goods, et cetera. Those companies spend on average 2 – 5% of plant replacement value per year on maintenance. About one third of this cost is maintenance labor. The maintenance work that gets done every day in factories around the world is typically inefficient, from a Lean perspective: time is wasted, different tasks are not properly coordinated, job durations are overestimated and job plans, when they exist, are thus "inflated" to cover up the inefficiency. All this happens because maintenance tends to be the "forgotten" area of efficiency in industrial companies, as much of the improvements are carried out on the (literally) productive areas of the factories. When companies set out to "improve" maintenance, they typically do it through budget cuts that can risk the reliability of the equipment. The authors believe there is a better way to do more with the same resources through a careful review of the current way of working and the introduction of Lean. With this book , the authors try to bring to maintenance managers and practitioners the tools they need to quickly improve efficiency (in a matter of weeks) without any investment.
Download or read book The Dark Factory and the Future of Manufacturing written by Philip J. Gisi and published by CRC Press. This book was released on 2024-02-19 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of manufacturing is undergoing significant changes driven by various factors and technological advancements. Automation and robotics technologies are revolutionizing manufacturing processes. Robotic systems are being increasingly used for repetitive and precise tasks, improving efficiency, quality, and safety. The Internet of Things (IoT) is enabling connectivity and data exchange between devices and systems. Manufacturing generates vast amounts of data and is leveraging this data through advanced analytics, providing valuable insights to optimize production processes, predict maintenance needs, and improve supply chain management. Additive Manufacturing has also gained significant traction in manufacturing. It enables the creation of complex parts and prototypes, customization, and rapid prototyping. Supply chains are becoming more interconnected and digitally integrated. Technologies such as blockchain enable transparent and secure transactions, traceability, and efficient inventory management. These trends and others are reshaping the manufacturing industry, promoting increased efficiency, agility, and sustainability. Manufacturers must be aware, understand, and embrace these changes to stay competitive and meet the evolving demands of customers in the modern era. This book enhances the awareness and understanding of these core technologies by explaining what they are and how they are being used in manufacturing. In addition, it provides practical suggestions on how to advance manufacturing in light of these changes. The book provides a view into the future and direction on how to navigate the journey to a more automated, smarter, and continuously learning factory. This book consolidates the major elements of the fourth industrial revolution and describes them in clear terms within the context of integrated manufacturing. It creates awareness and a fundamental understanding of the advanced technologies that are coming together to facilitate highly automated, smarter, agile, and sustainable operations.
Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ISOM 2013 Proceedings GIAP Journals India written by Global Institutes Amritsar and University of Mauritius and published by GIAP Journals. This book was released on with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On the Practice of Safety written by Fred A. Manuele and published by John Wiley & Sons. This book was released on 2003-06-27 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised and updated Third Edition of the benchmark On the Practice of Safety thoroughly covers subjects that must be mastered by anyone seeking to attain professional status in the practice of safety. Like its predecessors, the Third Edition provides a solid foundation for the study of the practice of safety in degree programs. Additionally, it serves as a basis for self-analysis by those safety professionals who seek to improve their performance, gain recognition from management for providing value, and achieve professional status. On the Practice of Safety’s distinctive essay format provides a penetrating exploration of a variety of subjects not possible in a standard reference. The Third Edition expands on the content of the former edition, adding updated statistics to reflect recent trends and developments in the field. In addition to a greatly extended chapter on quality and safety, author Fred Manuele contributes four new chapters: Heinrich Revisited: Truisms or Myths Addressing Severe Injury Potential Acceptable Risk Behavior-Based Safety Each chapter is a self-contained unit that offers comprehensive coverage of a particular topic. All of the chapters in the Third Edition reflect the increasing professional incidence of safety, occupational health, and environmental affairs falling under a common management, and address each issue accordingly.
Download or read book Financing Energy Efficiency written by and published by . This book was released on 1986 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
