Download or read book A Guide to Modern Methods of Construction written by Keith Ross and published by . This book was released on 2006 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This guide provides an accessible introduction to modern methods of construction. It will help developers, house builders, architects, planners and manufacturers to understand the variety of systems available and to appreciate how they can take advantage of the speed of construction and design opportunities they offer." -- Back cover.
Download or read book Modern Methods of House Construction written by Keith Ross and published by Bre Press. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide gives surveyors an insight into how to differentiate between houses built using modern methods of construction and those built using more 'traditional' site-based methods.
Download or read book Highway Construction written by Austin Thomas Byrne and published by . This book was released on 1907 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Methods of Construction and Innovative Materials written by Arthur Lyons and published by Taylor & Francis. This book was released on 2024-04-01 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook has two main themes. The first is Modern Methods of Construction (MMC) which is the off-site manufacture of a wide spectrum of products, ranging from whole buildings to be transported onto site, down to smaller units or components for site integration. The second theme describes the innovation and progress towards carbon zero by the major generators of CO2 in the construction industry – namely cement, steel and masonry. The first section of the book describes and illustrates with photographs, the major forms of Modern Methods of Construction. These include fully completed 3D units, panelised systems, pods, sub-assemblies and on-site MMC. The section on Innovative Materials then describes a wide range of construction products which are entering into the built environment sector. Some new entrants are variants on well-established construction materials such as steel and concrete. Materials such as these will remain major construction materials for the foreseeable future, but their composition and manufacturing processes will inevitably have to change. Timber also will remain a major construction material, but sustainable sourcing is key and its utilisation as cross-lamination timber (CLT) or as modified timber is rapidly developing. As a result, students and practitioners must familiarise themselves with these materials, their composition, and various uses. The book goes on to describe variants of other traditional building products, such as glass, plastic and insulation, which are undergoing major developments leading towards enhanced environmental sustainability, as well as many emergent materials, some of which are likely to be significant in future. Modern Methods of Construction and Innovative Materials is the only book combining these important elements of the future of the industry in an easy-to-read guide for students and new practitioners. It is essential reading for anyone studying and working in the built environment, be they architects, construction managers, surveyors or engineers.
Download or read book Innovation in Construction written by Seyed Hamidreza Ghaffar and published by Springer Nature. This book was released on 2022-03-23 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles the complex topic of implementing innovation and the successful application of advanced technology in the construction industry. It provides a practical guide for the transformation of the industry by detailing appropriate and effective implementation methods, required skill sets and structural changes necessary to facilitate the practical and innovative application of technology. The construction industry is behind other industries in its level of innovation and adoption of technology, and is of critical importance to many of today’s global challenges, such as climate change, global warming and resource scarcity. There is therefore a need for smarter and more efficient ways of managing available resources. This book elaborates on how the innovative application of technology could offer hope for the construction industry in it’s imperative to rise to current and future global challenges. It includes the real-world case studies of innovative projects that go beyond the current state-of-the-art academic research, and have improved productivity, quality and performance in the construction sector. This book provides readers from both industrial and academic backgrounds with a comprehensive guide on transforming the construction industry with the efficient and effective implementation of technologies and modern methods of construction.
Download or read book Modern Methods of Construction MMC in Housing written by Building Research Establishment and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Methods of Construction written by and published by . This book was released on 2016 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Construction Equipment and Methods written by Frank Harris and published by Longman Scientific and Technical. This book was released on 1989 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highway Construction written by Austin T. Byrne and published by . This book was released on 2015-08-05 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Highway Construction: A Practical Guide to Modern Methods of Roadbuilding and the Development of Better Ways of Communication The science of good road building is an old one as evidenced by the many highways in Europe which have withstood the wear of travel for centuries. Most of these famous roads were cut from solid rock or built of crushed stone of such a character as to be unaffected by weather conditions. Modern road building, however, has been largely influenced within the past fifteen years by the enormous increase in the amount of travel due to the automobile. This has not only been the means of developing new road surface to meet the more severe requirements of this type of vehicle but it has developed a country-wide interest in good roads, thus making it possible for the enthusiastic travelers to take long tours without meeting the formerly ever-present bugaboo of bad roads, besides making the ordinary town-to-town travel more satisfactory. It is with the idea of giving a clear conception of the engineering problems involved in road building, that is, laying out of the road by the best and easiest route, the questions of grade, contour, and drainage, and the construction of culverts and bridges, that this treatise has been written. The author has had long experience in the field of highway construction and has treated the different types of roads in a very complete and practical manner. Natural soil, gravel, broken stone, bituminous macadam and concrete roads are all carefully treated, not only as to material, but as to the best methods of laying them. The city pavements are also given due consideration, accompanied by typical specifications for the new surfaces developed for boulevards. Altogether, the article covers the entire field of road building, both city and country, and should appeal either to the highway engineer or to the untrained reader who has merely a passing interest in the subject. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Highway Construction written by Austin Thomas Byrne and published by . This book was released on 1908 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highway Construction written by Austin Thomas Byrne and published by . This book was released on 1908 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HIGHWAY CONSTRUCTION written by AUSTIN T. BYRNE and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prefab Architecture written by Ryan E. Smith and published by John Wiley & Sons. This book was released on 2011-06-03 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Prefab Architecture . . . is beyond theory, and beyond most of what we think we know about pods, containers, mods, and joints. This book is more than 'Prefabrication 101.' It is the Joy of Cooking writ large for the architecture and construction industries." From the Foreword by James Timberlake, FAIA THE DEFINITIVE REFERENCE ON PREFAB ARCHITECTURE FOR ARCHITECTS AND CONSTRUCTION PROFESSIONALS Written for architects and related design and construction professionals, Prefab Architecture is a guide to off-site construction, presenting the opportunities and challenges associated with designing and building with components, panels, and modules. It presents the drawbacks of building in situ (on-site) and demonstrates why prefabrication is the smarter choice for better integration of products and processes, more efficient delivery, and realizing more value in project life cycles. In addition, Prefab Architecture provides: A selected history of prefabrication from the Industrial Revolution to current computer numerical control, and a theory of production from integrated processes to lean manufacturing Coverage on the tradeoffs of off-site fabrication including scope, schedule, and cost with the associated principles of labor, risk, and quality Up-to-date products featuring examples of prefabricated structure, enclosure, service, and nterior building systems Documentation on the constraints and execution of manufacturing, factory production, transportation, and assembly Dozens of recent examples of prefab projects by contemporary architects and fabricators including KieranTimberlake, SHoP Architects, Office dA, Michelle Kaufmann, and many others In Prefab Architecture, the fresh approaches toward creating buildings that accurately convey ature and expanded green building methodologies make this book an important voice for adopting change in a construction industry entrenched in traditions of the past.
Download or read book Building Green written by Clarke Snell and published by Lark Books. This book was released on 2005 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clarke Snell & Timothy L. Callahan have returned with a photo-packed, amazingly complete, start-to-finish guide to "green" housebuilding.
Download or read book Modern Methods of Construction Design written by Ladislav Ševĉik and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been created on the basis of contributions to the 54th International Conference of Machine Design Departments that was held for the 60th anniversary of Technical University of Liberec. This international conference which follows a tradition going back more than 50 years is one of the longest-running series of conferences held in central Europe, dealing with methods and applications in machine design. The main aim of the conference was to provide an international forum where experts, researchers, engineers and industrial practitioners, managers and Ph.D. students could meet, share their experiences and present the results of their efforts in the broad field of machine design and related fields. The book has seven chapters which focus on new knowledge of machine design, optimization, tribology, experimental methods and measuring, engineering analyses and product innovation. Authors presented new design methods of machine parts and more complex assemblies with the help of numerical methods such as FEM. Research, measurements and studies of new materials, including composites for energy-efficient constructions are also described. The book also includes solutions and results useful for optimization and innovation of complex design problems in various industries.
Download or read book Sustainable Landscape Construction Third Edition written by Kim Sorvig and published by Island Press. This book was released on 2018-02 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic principles : "Sustainability" in context -- Principle 1 : Keep healthy sites healthy -- Principle 2 : Heal injured soils and sites -- Principle 3 : Favor living, flexible materials -- Principle 4 : Respect the waters of life -- Principle 5 : Pave less -- Principle 6 : Consider origin and fate of materials -- Principle 7 : Know the costs of energy over time -- Principle 8 : Celebrate light, respect darkness -- Principle 9 : Quietly defend silence -- Principle 10 : Maintain to sustain -- Principle 11 : Demonstrate performance, learn from failure -- Sustaining principles, evolving efforts.
Download or read book Modern Construction and Ground Engineering Equipment and Methods written by Frank Harris and published by Prentice Hall. This book was released on 1994 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trend toward increasing mechanisation of construction work to meet today's demands for greater productivity has resulted in the need for more effective application and management of modern construction technology. This second edition of Modern Construction Equipment and Methods provides comprehensive coverage of the factors affecting the decision making processes in construction and ground engineering, devising temporary works and selecting appropriate equipment. This book provides an invaluable reference work for students and professionals in the fields of civil engineering, construction, building, surveying and architecture.
