Download or read book A Geoscientist s Guide to Petrophysics written by Bernard Zinszner and published by Editions TECHNIP. This book was released on 2007 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geoscientists and Engineers taking an interest in Petrophysics, are struck by the contrasting treatment of the Physics Aspects and the Geology Aspects. If we are to scale up isolated petrophysical observations to an entire oil reservoir or an aquifer, it is essential to implement the powerful extrapolation tool of geological interpretation. This is clearly based on a good understanding of the relations between the petrophysical parameters studied and the petrological characteristics of the rock considered. The book is divided into two sections of different size. The first section (by far the largest) describes the various petrophysical properties of rocks. Each property is defined, limiting the mathematical formulation to the strict minimum but emphasising the geometrical and therefore petrological parameters governing this property. The second section concentrates on methodological problems and concerns, above all, the representativeness of the measurements and the size effects. The notions of Representative Elementary Volume, Homogeneity, Anisotropy, RockType, etc. provide a better understanding of the problems of up-scaling (Plug, Core, Log Analysis, Well Test). Lastly, we provide a description of several Porous Network investigation methods:Thin section, Pore Cast, Visualization of capillary properties, X-ray tomography.
Download or read book Petrophysics written by Steve Cannon and published by John Wiley & Sons. This book was released on 2015-11-09 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petrophysics is the science of evaluating the rock and fluid properties of oil, gas and water reservoirs through the acquisition of physical samples, electrical, chemical, nuclear and magnetic data acquired by surface logging, downhole coring, and drilling and wireline sondes. The evaluation, analysis and interpretation of this data is as much an art as a science as it requires an understanding of geology, chemistry, physics, electronics, mechanics and drilling technology. The techniques have been developed over the last 100 years primarily by the oil and gas industry, but the principles are equally relevant in coal mining, hydrogeology and environmental science. This book is firmly aimed at students of geology and petroleum engineering looking for a practical understanding of the background and workflows required to complete a petrophysical study of a well, a reservoir or a field. Petrophysics is log analysis constrained by geology, and if we ignore the rocks we risk making poor investment decisions.
Download or read book Fundamentals of the Petrophysics of Oil and Gas Reservoirs written by Leonid Buryakovsky and published by John Wiley & Sons. This book was released on 2012-07-25 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by some of the world's most renowned petroleum and environmental engineers, Fundamentals of the Petrophysics of Oil and Gas Reservoirs is the first book to offer the practicing engineer and engineering student these new cutting-edge techniques for prediction and forecasting in petroleum engineering and environmental management. In this book, the authors combine a rigorous, yet easy to understand, approach to petrophysics and how it is applied to petroleum and environmental engineering to solve multiple problems that the engineer or geologist faces every day. Useful in the prediction of everything from crude oil composition, pore size distribution in reservoir rocks, groundwater contamination, and other types of forecasting, this approach provides engineers and students alike with a convenient guide to many real-world applications. Petroleum geologists and engineers must have a working knowledge of petrophysics in order to find oil reservoirs and devise the best plan for getting it out of the ground, before drilling can begin. This book offers the engineer and geologist a fundamental guide for accomplishing these goals, providing much-needed calculations and formulas on fluid flow, rock properties, and many other topics that are encountered every day. The approach taken in Fundamentals of the Petrophysics of Oil and Gas Reservoirs is unique and has not been addressed until now in book format. Readers now have the ability to review the historic development of relationships and equations to define critical petrophysics attributes, many of which have either never been covered in the literature on petrophysics. Useful for the veteran engineer or scientist and the student alike, this book is a must-have for any geologist, engineer, or student working in the field of upstream petroleum engineering.
Download or read book Physical Properties of Rocks written by Juergen H. Schön and published by Elsevier. This book was released on 2015-11-26 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interpretation of geophysical data in exploration geophysics, well logging, engineering, mining and environmental geophysics requires knowledge of the physical properties of rocks and their correlations. Physical properties are a "key" for combined interpretation techniques. The study of rock physics provides an interdisciplinary treatment of physical properties, whether related to geophysical, geotechnical, hydrological or geological methodology. Physical Properties of Rocks, 2nd Edition, describes the physical fundamentals of rock properties, based on typical experimental results and relevant theories and models. It provides readers with all relevant rock properties and their interrelationships in one concise volume. Furthermore, it guides the reader through experimental and theoretical knowledge in order to handle models and theories in practice. Throughout the book the author focuses on the problems of applied geophysics with respect to exploration and the expanding field of applications in engineering and mining geophysics, geotechnics, hydrology and environmental problems, and the properties under the conditions of the upper Earth crust. Physical Properties of Rocks, Second Edition, guides readers through a systematic presentation of all relevant physical properties and their interrelationships in parallel with experimental and theoretical basic knowledge and a guide for handling core models and theories
Download or read book Advanced Petrophysics Geology porosity absolute permeability heterogeneity and geostatistics written by Ekwere J. Peters and published by Greenleaf Book Group. This book was released on 2012 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, fast-paced approach to teaching the concepts and problems common in petroleum engineering that will appeal to a wide range of disciplines Petrophysics is the study of rock properties and their interactions with fluids, including gases, liquid hydrocarbons, and aqueous solutions. This three-volume series from distinguished University of Texas professor Dr. Ekwere J. Peters provides a basic understanding of the physical properties of permeable geologic rocks and the interactions of the various fluids with their interstitial surfaces, with special focus on the transport properties of rocks for single-phase and multiphase flow. Based on Dr. Peters's graduate course that has been taught internationally in corporations and classrooms, the series covers core topics and includes full-color CT and NMR images, graphs, and figures to illustrate practical application of the material. Subjects addressed in volume 1 (chapters 1-4) include - Geological concepts - Porosity and water saturation - Absolute permeability - Heterogeneity and geostatistics Advanced Petrophysics features over 140 exercises designed to strengthen learning and extend concepts into practice. Additional information in the appendices covers dimensional analysis and a series of real-world projects that enable the student to apply the principles presented in the text to build a petrophysical model using well logs and core data from a major petroleum-producing province.
Download or read book Hybrid Vehicles written by BADIN François and published by Editions TECHNIP. This book was released on 2013-07-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fast growth in world population and the associated energy requirements, the announced depletion of fossil fuel resources, the continuing rise in greenhouse gas (GHG) emissions with the induced climatic changes represent some of the major challenges to be taken up in the coming years and decades. Hybridization therefore typically represents a transition technology which can significantly improve the energy and environmental performance of current vehicles, without radically changing their use typologies, while opening the way to new propulsion modes for the longer term. It is nevertheless a complex subject requiring a multidisciplinary approach. This book, which is intended to be exhaustive, considers the vehicle, its components, their association and their control, as well as the global balances determined over the vehicle lifetime. It starts with a general presentation of the various conditions of use of vehicles, to give readers an understanding of the stakes related to the development of hybrid vehicles and the methods used to compare the performance of the various solutions. The principles and the various types of internal combustion engine and electrical drives, onboard energy storage systems, principles, architectures, specific components and operation of hybrid drivetrains, as well as the energy management in these vehicles, are developed. A global analysis of the various drivetrains life cycle assessment (LCA), total costs and availability of sensitive materials is also provided. This book is intended for everyone involved in the design, manufacture and implementation of hybrid drive vehicles and their components. It will also be of interest to students, teachers and researchers wishing to acquire or further their knowledge in all fields impacted by drivetrain electrification. More globally, after consulting this book, readers will be in a position to evaluate the technologies related to the concept of drivetrain hybridization, their implementation, balances and generalization conditions. This book is available in French Under the title "Véhicules hybrides". Contents : 1. Vehicle use. 2. Internal combustion engines. 3. Electric drivetrain. 4. On-board energy storage systems. 5. Hybridization. 6. Control of hybrid vehicles. 7. Comparative study of hybrid vehicles: greenhouse gas emissions, energy consumption, and cost. Appendixes.
Download or read book Hydrogen the Post oil Fuel written by Edouard Freund and published by Editions TECHNIP. This book was released on 2013 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen—is it the energy vector for the future, or on the contrary, limited for many more decades, possibly even until the end of the century, to its current applications in the field of chemistry and refining? Advocates of the hydrogen civilization and the skeptics, even the declared opponents, are deeply divided over this issue. For the first, following a technological revolution, hydrogen would play a universal role alongside electricity in transport, leading to radical elimination of CO2 emissions. For the second, hydrogen will remain restricted to its current applications due to the insoluble problems inherent in its generalized use, especially in transport.
Download or read book Shared Earth Modeling written by Michel Perrin and published by Editions TECHNIP. This book was released on 2013 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades, earth modeling has become a major investigative tool for evaluating the potential of hydrocarbon reservoirs. Earth modelling must now face new challenges since petroleum exploration no longer consists in only investigating newly identified resources, but also in re-evaluating the potential of previously investigated reservoirs in the light of new prospecting data and of revised interpretations. Earth models incorporate a variety of different interpretations made on various types of data at successive steps of the modeling process. However, current modeling procedures provide no way to link a range of data and interpretations with a final earth model. For this reason, sharing and exchanging information about the model building process is at present a major difficulty. Recently, the term “Shared Earth Modeling” has been used for expressing the idea that earth models should be built in such a way that experts and end users can have access, at any time, to all the information incorporated into the model. This information does not only concern the data, but also the knowledge that geoscientists produce by interpreting these data. Accordingly, practical solutions must be studied for operating a knowledge-driven approach of Shared Earth Modeling. This is the goal of this book. This study of earth subsurface modeling is intended for several categories of readers. It concerns in the first place geologists, engineers and managers involved in the study and evaluation of subsurface reservoirs and hydrocarbon exploration. Relying on recent progress in various fields of computer sciences, the authors present innovative solutions for solving the critical issue of knowledge exchange at key steps of the modeling process. This book will also be of interest to researchers in computer science and, more generally, to engineers, researchers and students who wish to apply advanced knowledge-based techniques to complex engineering problems. Contents : Part I. Earth Models. 1. Earth models as subsurface representations. 2. Earth models for underground resource exploration and estimation. 3. Earth models used in petroleum industry: current practice and future challenges. Part II. Knowledge oriented solutions. 4. Knowledge based approach of a data intensive problem: seismic interpretation. 5. Individual surface representations and optimization. 6. Geological surface assemblage. 7. 3D Meshes for structural, stratigraphy and reservoir frameworks. 8. The data extension issue: geological constraints applied in geostatistical processes. Part III. Knowledge formalization. 9. Ontologies and their use for geological knowledge formalization. 10. Ontologies for Interpreting geochronological relationships. 11. Building ontologies for analyzing data expressed in natural language. 12. Ontology-based rock description and interpretation. Part IV. Knowledge management & applications. 13. Ontology integration and management within data intensive engineering systems. 14. Earth modeling using web services. 15. Full scale example of a knowledge-based method for building and managing an earth model. Part V. Conclusion. Appendix. Glossary.
Download or read book Corrosion and Degradation of Metallic Materials written by François Ropital and published by Editions technip. This book was released on 2010 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second section describes the various techniques used in the petroleum industry to protect metallic materials, to detect and to monitor corrosion, in a manner readily accessible to non-specialist readers. --
Download or read book Biofuels written by Daniel Ballerini and published by Editions TECHNIP. This book was released on 2012 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Changes in the world energy context, the increasing awareness of the environmental stakes and the development of research on the production of second and third generation biofuels revealed a clear need to write a new book which updates and complements all technical, financial and environmental aspects of Les Biocarburants—État des lieux, perspectives et enjeux du développement (Biofuels—Current status, outlook and development stakes) published in 2006. This book provides a detailed state of the art of the first generation biofuel production technologies. It describes the new «second generation» pathways which use lignocellulosic biomass as raw material and are starting to find industrial applications, thereby reducing the competition between the food resource and the use of agricultural materials for energy purposes. It also provides a technical update on the algaeto-energy pathway (third generation) and the production of methane and hydrogen by biochemical pathways. The book arrives at exactly the right time to renew the interest in biofuels, including for air transport, and provide an insight on the technological research and development axes currently being investigated. It is intended for transport companies, refiners, forestry companies, the agricultural and agribusiness sectors as well as the public authorities, students, university teachers and researchers.
Download or read book Geomechanics Applied to the Petroleum Industry written by Jean-François Nauroy and published by Editions TECHNIP. This book was released on 2011 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing an efficient drilling program is a key step for the development of an oil and/or gas field. Variations in reservoir pressure, saturation and temperature, induced by reservoir production or CO2 injection, involve various coupled physical and chemical processes. Geomechanics, which consider all thermohydromechanical phenomena involved in rock behavior, play an important role in every operation involved in the exploitation of hydrocarbons, from drilling to production, and in CO2 geological storage operations as well. Pressure changes in the reservoir modify the in situ stresses and induce strains, not only within the reservoir itself, but also in the entire sedimentary column. In turn, these stress variations and associated strains modify the fluids flow in the reservoir and change the wellbore stability parameters. This book offers a large overview on applications of Geomechanics to petroleum industry. It presents the fundamentals of rock mechanics, describes the methods used to characterise rocks in the laboratory and the modelling of their mechanical behaviour ; it gives elements of numerical geomechanical modelling at the site scale. It also demonstrates the role of Geomechanics in the optimisation of drilling and production : it encompasses drillability, wellbore stability, sand production and hydraulic fracturing ; it provides the basic attainments to deal with the environmental aspects of heave or subsidence of the surface layers, CO2 sequestration and well abandonment ; and it shows how seismic monitoring and geomechanical modelling of reservoirs can help to optimise production or check cap rock integrity. This book will be of interest to all engineers involved in oil field development and petroleum engineering students, whether drillers or producers. It aims also at providing a large range of potential users with a simple approach of a broad field of knowledge.
Download or read book CO2 Capture written by Fabrice Lecomte and published by Editions TECHNIP. This book was released on 2010 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: CO2 capture and geological storage (CCS) is now recognised as being one of the pathways that can be implemented to reduce CO2 emissions and fight against global warming. But where, how and at what price can CO2 be captured? This book attempts to provide the answers to these questions, reviewing the state of the art of the technologies required. It presents the three main pathways considered in which the CO2 capture technologies are expected to be implemented, respectively: the post-combustion pathway, in which the CO2 contained in industrial flue gases is extracted; the oxy-combustion pathway, in which combustion is performed in oxygen to obtain flue gases with high CO2 concentration; and lastly the pre-combustion pathway, in which carbon is extracted from the initial fuel to generate hydrogen, whose combustion will produce only water vapour. The book introduces, for each pathway, the technologies currently available and those under development. It is intended for everyone wanting to gain a better understanding of the mechanisms implemented in CO2 capture operations, as well as the technological and economic challenges to be met to ensure that the costs generated by these operations are no longer an obstacle to their worldwide generalisation.Contents: 1. Why capture and store CO2? Global warming. How to reduce CO2 emissions. Main links of the CCS chain. 2. Where capture CO2? CO2 fixed emission sources worldwide. Fixed sources in France. CO2 capture potential in France. 3. Post-Combustion CO2 capture. Principles and stakes. Characteristics of post-combustion flue gases. Separation techniques potentially suitable for post-combustion CO2 capture. Technologies under development for post-combustion CO2 Capture. CO2 conditioning. Conclusion. 4. Oxy-combustion CO2 capture. Principles and stakes. Oxy-combustion. Chemical looping combustion. CO2 conditioning. Demonstrations. 5. Pre-combustion CO2 capture. Principles and stakes. Syngas production. Water-gas shift reaction. CO2 extraction. CO2 conditioning. Hydrogen combustion. Integrated power production processes with pre-combustion CO2 capture. 6. Capture and store CO2: at what cost? Calculation bases. CO2 capture costs. CO2 transport costs. CO2 storage costs. Trend in the cost of the CCS chain - Power production. Variability of CCS chain costs. Application to existing installations. Conclusion. Appendix.
Download or read book Corrosion and degradatio written by François Ropital and published by Editions OPHRYS. This book was released on with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second section describes the various techniques used in the petroleum industry to protect metallic materials, to detect and to monitor corrosion, in a manner readily accessible to non-specialist readers. --
Download or read book Mechanics and Physics of Porous Solids written by Olivier Coussy and published by John Wiley & Sons. This book was released on 2011-06-28 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics and Physics of Porous Solids addresses the mechanics and physics of deformable porous materials whose porous space is filled by one or several fluid mixtures interacting with the solid matrix. Coussy uses the language of thermodynamics to frame the discussion of this topic and bridge the gap between physicists and engineers, and organises the material in such a way that individual phases are explored, followed by coupled problems of increasing complexity. This structure allows the reader to build a solid understanding of the physical processes occurring in the fluids and then porous solids. Mechanics and Physics of Porous Solids offers a critical reference on the physics of multiphase porous materials - key reading for engineers and researchers in structural and material engineering, concrete, wood and materials science, rock and soil mechanics, mining and oil prospecting, biomechanics.
Download or read book Petroleum Microbiology written by Trevor Jones and published by Editions OPHRYS. This book was released on with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrocarbons and their derivatives (oxygenated and chlorinated, in particular), both natural and xenobiotic, represent a very large class of compounds whose conversions and degradation by microorganisms cover an extremely rich field, whose concepts are detailed in this book. The fascinating evolution of these concepts over the last twenty years has revealed the extent of the processes implemented in the environment and has multiplied their industrial applications. The resulting achievements and the current developments are described in this book.The English edition of this reference manual is an entirely revised and updated version of the French edition. It is intended for professionals, microbiologists and chemists, as well as scientists, engineers, teachers and post-doctoral researchers, who are interested by the conversions of hydrocarbons and by microbial ecology.The French edition of this book was awarded a special mention for engineering education text book by the Roberval Prize committee in 2007.
Download or read book Water Transport in Brick Stone and Concrete written by Christopher Hall and published by CRC Press. This book was released on 2021-07-21 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture dynamics in brick, stone and concrete has a controlling influence on the durability and performance of the built environment. Water Transport in Brick, Stone and Concrete provides a unified description of transport processes involving saturated and unsaturated flow in porous inorganic materials and structures. It sets out fundamental physics and materials science, mathematical description and experimental measurement as a basis for engineering design and construction practice. Now in its third edition, the book combines a systematic presentation of the scientific and technical principles with new analyses of topics such as sorption isotherms, temperature dependence of sorptivity, time-dependent properties of cement-based materials, layered materials, air-trapping and driving rain. It serves as an authoritative reference for research workers, practising engineers and students of civil, building, architectural and materials engineering. Much of the fundamental work is relevant to engineers in soil science and geotechnics, as well as oilfield, chemical and process engineering.
Download or read book Physical Properties of Rocks written by Jürgen Schön and published by Pergamon. This book was released on 2004 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interpretation of geophysical data in exploration geophysics, well logging, engineering, mining and environmental geophysics requires knowledge of the physical properties of the rocks and their correlation. Physical properties are a "key" for combined interpretation techniques. The study of rock physics provides an interdisciplinary treatment of physical properties, whether related to geophysical, geotechnical, hydrological or geological methodology. The book is a comprehensive and concise systematic presentation of the physical properties of rocks. It is focussed on the problems of applied geophysics with respect to exploration and the expanding field of applications in engineering and mining geophysics, geotechnics, hydrology and environmental problems, and the properties under the conditions of the upper earth crust. This volume contains theoretical and experimental results relating to the main geophysical properties - density, magnetic properties, natural radioactivity, elastic and anelastic properties, electrical and thermal. It also presents the correlation between the individual properties as a basis of modern interpretation methods, including relationships between geophysical and geotechnical properties.
