Download or read book Thermodynamic Properties of Cryogenic Fluids written by Richard T. Jacobsen and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practicing engineers and scientist will benefit from this book's presentation of the most accurate information on the subject. The equations for fifteen important cryogenic fluids are presented in a basic format, accompanied by pressure-enthalpy and temperature-entropy charts and tables of thermodynamic properties. The book is supported by ICMPROPRS - an interactive computer program for the calculation of thermodynamic properties of the cryogenic fluids - that can be downloaded from the World Wide Web.

Download or read book Organic Rankine Cycle ORC Power Systems written by Ennio Macchi and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications provides a systematic and detailed description of organic Rankine cycle technologies and the way they are increasingly of interest for cost-effective sustainable energy generation. Popular applications include cogeneration from biomass and electricity generation from geothermal reservoirs and concentrating solar power installations, as well as waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes. With hundreds of ORC power systems already in operation and the market growing at a fast pace, this is an active and engaging area of scientific research and technical development. The book is structured in three main parts: (i) Introduction to ORC Power Systems, Design and Optimization, (ii) ORC Plant Components, and (iii) Fields of Application. - Provides a thorough introduction to ORC power systems - Contains detailed chapters on ORC plant components - Includes a section focusing on ORC design and optimization - Reviews key applications of ORC technologies, including cogeneration from biomass, electricity generation from geothermal reservoirs and concentrating solar power installations, waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes - Various chapters are authored by well-known specialists from Academia and ORC manufacturers

Download or read book Thermodynamic Models for Chemical Engineering written by Jean-Noel Jaubert and published by Elsevier. This book was released on 2021-06-25 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamic Models for Chemical Engineering gives an overview of the main thermodynamic models used by engineers and in engineering researcher processes. These fall into two main families, equations of state and activity coefficient models. The book presents the state-of-the-art of purely predictive models. Presents a comprehensive overview of the main thermodynamic models Explains their theoretical base Gives detailed methods to estimate model parameters

Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 2054 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oregon Convention Center, Portland, Oregon, was the venue for the 1997 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. John Barclay, of the University of Victoria, and David Smathers, of Cabot Performance Materials, were conference chairmen. Portland is the home of Northwest Natural Gas, a pioneer in the use of liquid natural gas, and Portland State University, where cryogenic research has long been conducted. The program consisted of 350 CEC papers, considerable more than CEC-95. This was the largest number of papers ever submitted to the CEC. Of these, 263 papers are published here, in Volume 43 of Advances in Cryogenic Engineering. Once again the volume is published in two books. CEC PAPER REVIEW PROCESS Since 1954 Advances in Cryogenic Engineering has been the archival publication of papers presented at the biennial CEC!ICMC conferences. The publication includes invited, unsolicited, and government sponsored research papers in the research areas of cryogenic engineering and applications. All of the papers published must (1) be presented at the conference, (2) pass the peer review process, and (3) report previously unpublished theoretical studies, reviews, or advances in cryogenic engineering.

Download or read book ASHRAE Handbook written by and published by . This book was released on 1997 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Cryogenic Engineering written by Quan-Sheng Shu and published by Springer Science & Business Media. This book was released on 2000-10-31 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the technology of cryogenic comminution has been widely applied in the field of chemical engineering, food making, medicine production, and particularly in recycling of waste materials. Because of the increasing pollution of waste tires and the shortage of raw rubber resource, the recycling process for waste rubber products has become important and commercially viable. This technology has shown a great number of advantages such as causing no environmental pollution, requiring low energy consumption and producing high quality products. Hence, the normal crusher which was used to reclaim materials, such as waste tires, nylon, plastic and many polymer materials at atmospheric 12 temperature is being replaced by a cryogenic crusher. • In the cryogenic crusher, the property of the milled material is usually very sensitive to temperature change. When a crusher is in operation, it will generate a great deal of heat that causes the material temperature increased. Once the temperature increases over the vitrification temperature, the material property will change and lose the brittle behavior causing the energy consumption to rise sharply. Consequently, the comminution process cannot be continued. Therefore, it is believed that the cryogenic crusher is the most critical component in the cryogenic comminution system. The research on the temperature increase and energy consumption in the cryogenic crusher is not only to reduce the energy consumption of the crasher, but also to reduce the energy consumption of the cryogenic system.

Download or read book The Solfatara Magmatic Hydrothermal System written by Luigi Marini and published by Springer Nature. This book was released on 2022-05-05 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes innovative gas-geothermometers and geobarometers, which are urgently needed to estimate the increasingly higher temperatures and pressures present at depth below the Solfatara volcano, owing to its on-going unrest. Therefore, in this book, new gas geoindicators, applicable up to ca. 1000°C and 3 kbar, have been implemented and applied to Solfatara fluids. The innovations of this book include: methane, having a sluggish behavior, was treated separately from fast-reacting carbon monoxide; deviations from the ideal gas behavior were considered; the effects of reaction kinetics were taken into account. This was possible because a dataset including many geochemical parameters and extending from 1983 to 2020 with a good sampling frequency is available for Solfatara, making it a case history probably unique worldwide. Nevertheless, the gas geoindicators described in this book can be applied to other similar systems. Thus, this book is of interest to many scientists studying gas geochemistry, geothermometry, and geobarometry for volcanic surveillance and the mitigation of the volcanic risk.

Download or read book Thermodynamic Models written by Michael L. Michelsen and published by . This book was released on 2007 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CRC Handbook of Solubility Parameters and Other Cohesion Parameters written by Allan F.M. Barton and published by Routledge. This book was released on 2017-10-19 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Solubility Parameters and Other Cohesion Parameters, Second Edition, which includes 17 new sections and 40 new data tables, incorporates information from a vast amount of material published over the last ten years. The volume is based on a bibliography of 2,900 reports, including 1,200 new citations. The detailed, careful construction of the handbook develops the concept of solubility parameters from empirical, thermodynamic, and molecular points of view and demonstrates their application to liquid, gas, solid, and polymer systems.

Download or read book CRC Handbook of Applied Thermodynamics written by David A. Palmer and published by CRC Press. This book was released on 2019-07-23 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook features an overview of the importance of physical properties and thermodynamics; and the use of thermo-dynamics to predict the extent of reaction in proposed new chem-ical combinations. The use of special types of data and pre-diction methods to develop flowsheets for probing projects; and sources of critically evaluated data, dividing the published works into three categories depending on quality are given. Methods of doing one's own critical evaluation of literature, a list of known North American contract experimentalists with the types of data mea-sured by each, methods for measuring equilibrium data, and ther-modynamic concepts to carry out process opti-mization are also featured.

Download or read book Advances in Engineering Fluid Mechanics Multiphase Reactor and Polymerization System Hydr written by Nicholas P Cheremisinoff and published by Elsevier. This book was released on 1996-08-27 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Advances in Engineering Fluid Mechanics Series covers topics in hydrodynamics related to polymerization of elastomers and plastics. Emphasis is given to advanced concepts in multiphase reactor systems often used in the manufacturing of products. This volume is comprised of 30 chapters that address key subject areas such as multiphase mixing concepts, multicomponet reactors and the hydrodynamics associated with their operations, and slurry flow behavior associated with non-Newtonian flows.

Download or read book Understanding Petroleum Reservoirs written by John M. Cubitt and published by Geological Society of London. This book was released on 2004 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Biweekly Cryogenics Current Awareness Service written by and published by . This book was released on 1978 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering Design written by Ray Sinnott and published by Elsevier. This book was released on 2014-06-28 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2nd Edition of Coulson & Richardson's classic Chemical Engineering text provides a complete update and revision of Volume 6: An Introduction to Design. It provides a revised and updated introduction to the methodology and procedures for process design and process equipment selection and design for the chemical process and allied industries. It includes material on flow sheeting, piping and instrumentation, mechanical design of equipment, costing and project evaluation, safety and loss prevention. The material on safety and loss prevention and environmental protection has been revised to cover current procedures and legislation. Process integration and the use of heat pumps has been included in the chapter on energy utilisation. Additional material has been added on heat transfer equipment; agitated vessels are now covered and the discussion of fired heaters and plate heat exchangers extended. The appendices have been extended to include a computer program for energy balances, illustrations of equipment specification sheets and heat exchanger tube layout diagrams.This 2nd Edition will continue to provide undergraduate students of chemical engineering, chemical engineers in industry and chemists and mechanical engineers, who have to tackle problems arising in the process industries, with a valuable text on how a complete process is designed and how it must be fitted into the environment.