Download or read book Fluid Mechanics written by Joseph H. Spurk and published by Springer Nature. This book was released on 2019-12-02 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This successful textbook emphasizes the unified nature of all the disciplines of Fluid Mechanics as they emerge from the general principles of continuum mechanics. The different branches of Fluid Mechanics, always originating from simplifying assumptions, are developed according to the basic rule: from the general to the specific. The first part of the book contains a concise but readable introduction into kinematics and the formulation of the laws of mechanics and thermodynamics. The second part consists of the methodical application of these principles to technology. In addition, sections about thin-film flow and flow through porous media are included.

Download or read book The Behavior of Large Particles Falling in Quiescent Liquids written by G. E. Stringham and published by . This book was released on 1969 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bubbles Drops and Particles written by R. Clift and published by Courier Corporation. This book was released on 2013-04-22 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a unified treatment and critical review of the literature related to the fluid dynamics, heat transfer, and mass transfer of single bubbles, drops, and particles. 1978 edition.

Download or read book Advances in Chemical Engineering written by and published by Academic Press. This book was released on 1966-01-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Engineering

Download or read book Adhesive Particle Flow written by Jeffery S. Marshall and published by Cambridge University Press. This book was released on 2014-03-31 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is targeted at professionals and graduate students working in disciplines where flow of adhesive particles plays a significant role.

Download or read book Particle fluid Two phase Flow written by Jinghai Li and published by . This book was released on 1994 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by R.P. Chhabra and published by CRC Press. This book was released on 2006-07-25 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bubbles, Drops, and Particles in Non-Newtonian Fluids, Second Edition continues to provide thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. The book demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multipha

Download or read book On the Effect of the Internal Friction of Fluids on the Motion of Pendulums written by George Gabriel 1819-1903 Stokes and published by Legare Street Press. This book was released on 2021-09-10 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book Introduction to Practical Fluid Flow written by R. Peter King and published by Elsevier. This book was released on 2002-12-02 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Practical Fluid Flow provides information on the the solution of practical fluid flow and fluid transportation problems through the application of fluid dynamics. Emphasising the solution of practical operating and design problems, the text concentrates on computer-based methods throughout, in keeping with trends in engineering. With a focus on the flow of slurries and non-Newtonian fluids, it will be useful for and engineering students who have to deal with practical fluid flow problems. Emphasises flow of slurries and Non-Newtonian fluids.Covers the application of fluid dynamics to the solution of practical fluid flow and fluid transportation problems.

Download or read book 28th European Symposium on Computer Aided Process Engineering written by Stefan Radl and published by Elsevier. This book was released on 2018-06-26 with total page 1766 pages. Available in PDF, EPUB and Kindle. Book excerpt: 28th European Symposium on Computer Aided Process Engineering, Volume 43 contains the papers presented at the 28th European Society of Computer-Aided Process Engineering (ESCAPE) event held in Graz, Austria June 10-13 , 2018. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. Presents findings and discussions from the 28th European Society of Computer-Aided Process Engineering (ESCAPE) event

Download or read book Theoretical Microfluidics written by Henrik Bruus and published by Oxford University Press. This book was released on 2007-09-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics is a young and rapidly expanding scientific discipline, which deals with fluids and solutions in miniaturized systems, the so-called lab-on-a-chip systems. It has applications in chemical engineering, pharmaceutics, biotechnology and medicine. As the lab-on-a-chip systems grow in complexity, a proper theoretical understanding becomes increasingly important. The basic idea of the book is to provide a self-contained formulation of the theoretical framework of microfluidics, and at the same time give physical motivation and examples from lab-on-a-chip technology. After three chapters introducing microfluidics, the governing equations for mass, momentum and energy, and some basic flow solutions, the following 14 chapters treat hydraulic resistance/compliance, diffusion/dispersion, time-dependent flow, capillarity, electro- and magneto-hydrodynamics, thermal transport, two-phase flow, complex flow patterns and acousto-fluidics, as well as the new fields of opto- and nano-fluidics. Throughout the book simple models with analytical solutions are presented to provide the student with a thorough physical understanding of order of magnitudes and various selected microfluidic phenomena and devices. The book grew out of a set of well-tested lecture notes. It is with its many pedagogical exercises designed as a textbook for an advanced undergraduate or first-year graduate course. It is also well suited for self-study.

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."

Download or read book Classical Aerodynamic Theory written by and published by . This book was released on 1979 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microbiorobotics written by Minjun Kim and published by William Andrew. This book was released on 2012-03-08 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiorobotics is a new engineering discipline that inherently involves a multidisciplinary approach (mechanical engineering, cellular biology, mathematical modeling, control systems, synthetic biology, etc). Building robotics system in the micro scale is an engineering task that has resulted in many important applications, ranging from micromanufacturing techniques to cellular manipulation. However, it is also a very challenging engineering task. One of the reasons is because many engineering ideas and principles that are used in larger scales do not scale well to the micro-scale. For example, locomotion principles in a fluid do not function in the same way, and the use of rotational motors is impractical because of the difficulty of building of the required components. Microrobotics is an area that is acknowledged to have massive potential in applications from medicine to manufacturing. This book introduces an inter-disciplinary readership to the toolkit that micro-organisms offer to micro-engineering The design of robots, sensors and actuators faces a range of techology challenges at the micro-scale. This book shows how biological techniques and materials can be used to meet these challenges World-class multi-disciplanry editors and contributors leverage insights from engineering, mathematical modeling and the life sciences – creating a novel toolkit for microrobotics

Download or read book Marine Hydrodynamics 40th anniversary edition written by J. N. Newman and published by MIT Press. This book was released on 2018-01-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook that offers a unified treatment of the applications of hydrodynamics to marine problems. The applications of hydrodynamics to naval architecture and marine engineering expanded dramatically in the 1960s and 1970s. This classic textbook, originally published in 1977, filled the need for a single volume on the applications of hydrodynamics to marine problems. The book is solidly based on fundamentals, but it also guides the student to an understanding of engineering applications through its consideration of realistic configurations. The book takes a balanced approach between theory and empirics, providing the necessary theoretical background for an intelligent evaluation and application of empirical procedures. It also serves as an introduction to more specialized research methods. It unifies the seemingly diverse problems of marine hydrodynamics by examining them not as separate problems but as related applications of the general field of hydrodynamics. The book evolved from a first-year graduate course in MIT's Department of Ocean Engineering. A knowledge of advanced calculus is assumed. Students will find a previous introductory course in fluid dynamics helpful, but the book presents the necessary fundamentals in a self-contained manner. The 40th anniversary of this pioneering book offers a foreword by John Grue. Contents Model Testing • The Motion of a Viscous Fluid • The Motion of an Ideal Fluid • Lifting Surfaces • Waves and Wave Effects • Hydrodynamics of Slender Bodies

Download or read book Multiphase Flow and Fluidization written by Dimitri Gidaspow and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Useful as a reference for engineers in industry and as an advanced level text for graduate engineering students, Multiphase Flow and Fluidization takes the reader beyond the theoretical to demonstrate how multiphase flow equations can be used to provide applied, practical, predictive solutions to industrial fluidization problems. Written to help advance progress in the emerging science of multiphase flow, this book begins with the development of the conservation laws and moves on through kinetic theory, clarifying many physical concepts (such as particulate viscosity and solids pressure) and introducing the new dependent variable--the volume fraction of the dispersed phase. Exercises at the end of each chapterare provided for further study and lead into applications not covered in the text itself. - Treats fluidization as a branch of transport phenomena - Demonstrates how to do transient, multidimensional simulation of multiphase processes - The first book to apply kinetic theory to flow of particulates - Is the only book to discuss numerical stability of multiphase equations and whether or not such equations are well-posed - Explains the origin of bubbles and the concept of critical granular flow - Presents clearly written exercises at the end of each chapter to facilitate understanding and further study

Download or read book Fluid Mechanics written by Yunus A. Çengel and published by . This book was released on 2006 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the basic principles and equations of fluid mechanics in the context of several real-world engineering examples. This book helps students develop an intuitive understanding of fluid mechanics by emphasizing the physics, and by supplying figures, numerous photographs and visual aids to reinforce the physics.