Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing

Download or read book Manufacturing a Better Future for America written by Richard McCormack and published by . This book was released on 2009 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Future of Chinese Manufacturing written by TACHIA Chin and published by Elsevier. This book was released on 2018-05-24 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Future of Chinese Manufacturing: Employment and Labour Challenges gives context and analysis on employment and labor issues in contemporary China, specifically relating to manufacturing industries. With one fifth of the world's workforce, China has taken advantage of its cheap labor to serve as the world's factory, achieving stunning growth for two decades. This book covers the appreciation of RMB, constant increases in minimum wage, shortages of skilled workers in China's labor-intensive manufacturing sector, and the fact that many large multinational corporations (MNCs) must cut costs, and are thus shifting their main production bases to other developing countries. Under such a tough situation, and coupled with the global economic slowdown, manufacturing employment in China confronts severe labor-related challenges, such as high turnover rates, recruitment difficulties for workers, and a series of high profile labor strikes and publicity concerning working conditions. - Integrates human capital and cultural theories - Analyzes looming labor unrest and related workforce issues in China through a unique context-specific lens - Explores the roles that Chinese institutions and culture play in resolving problems related to these issues

Download or read book Manufacturing the Future written by Stephen B. Adams and published by Cambridge University Press. This book was released on 1999-01-28 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of Contents

Download or read book Business Trends in Practice written by Bernard Marr and published by John Wiley & Sons. This book was released on 2021-11-15 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: WINNER OF THE BUSINESS BOOK OF THE YEAR AWARD 2022! Stay one step ahead of the competition with this expert review of the most impactful and disruptive business trends coming down the pike Far from slowing down, change and transformation in business seems to come only at a more and more furious rate. The last ten years alone have seen the introduction of groundbreaking new trends that pose new opportunities and challenges for leaders in all industries. In Business Trends in Practice: The 25+ Trends That Are Redefining Organizations, best-selling business author and strategist Bernard Marr breaks down the social and technological forces underlying these rapidly advancing changes and the impact of those changes on key industries. Critical consumer trends just emerging today—or poised to emerge tomorrow—are discussed, as are strategies for rethinking your organisation’s product and service delivery. The book also explores: Crucial business operations trends that are changing the way companies conduct themselves in the 21st century The practical insights and takeaways you can glean from technological and social innovation when you cut through the hype Disruptive new technologies, including AI, robotic and business process automation, remote work, as well as social and environmental sustainability trends Business Trends in Practice: The 25+ Trends That Are Redefining Organizations is a must-read resource for executives, business leaders and managers, and business development and innovation leads trying to get – and stay – on top of changes and disruptions that are right around the corner.

Download or read book The Future Computed AI and Manufacturing written by Greg Shaw and published by . This book was released on 2019-05-23 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Future Computed: AI and Manufacturing is the next book in Microsoft's The Future Computed series looking at the impact of AI on society. The book features stories from industry leaders and policymakers from around the world, sharing insights into how customers can progress their AI journey. IT also sets out suggestions about how countries can build competitive manufacturing sectors while delivering AI and addressing short-term disruption.

Download or read book Manufacturing Technologies for Machines of the Future written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date view of manufacturing technologies. Written by leading experts from the USA, Europe, and Asia, both handbook and CD-ROM cover a wide range of topics ranging from industrial management and organization to automation and control, from mechanical to electronical technology, and from machine tools to the consumer goods industry. It gives a unique interdisciplinary and global presentation of material and combines, for the first time, theoretical and significant practical results from the last decades of the most important branches of machine building. Its broad coverage appeals to the highly skilled scientific expert as well as the experienced design engineer, and to undergraduate and advanced students.

Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Modern Manufacturing Technology written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-12-03 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Technology: Spotlight on Future summarizes the emergence and development of modern manufacturing techniques (MMTs) with a focus on metallic and advanced material-based additive manufacturing technologies and their potential applications. Further, it explores advanced machining techniques for production of novel nanomaterials. The book also covers modern sophisticated techniques for the fabrication of ultrafine electronic devices such as micro-electromechanical systems (MEMS), nano-electromechanical systems (NEMS), semiconductors, and optical systems. A dedicated chapter on manufacturing technology for Industry 4.0 is included. Features: Describes the background of manufacturing techniques in brief including the advent of and introduction to MMTs Reviews various types of MMTs established in recent years and their accelerated growth and development innovation-driven applications Overviews the physical and chemical techniques used for nanomaterials production Explores the fabrication mechanisms of MEMS, NEMS, semiconductors and optical devices Provides a conceptual overview of additive manufacturing technologies This book is geared to undergraduate and postgraduate students and professionals in mechanical and manufacturing engineering, and the manufacturing industry.

Download or read book Growth in a Time of Change written by Hyeon-Wook Kim and published by Brookings Institution Press. This book was released on 2020-02-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growth in a Time of Change: Global and Country Perspectives on a New Agenda is the first of a two-book research project that addresses new issues and challenges for economic growth arising from ongoing significant change in the world economy, focusing especially on technological transformation. The project is a collaboration between the Brookings Institution and the Korea Development Institute. Part I of the book looks at key elements of change from a global perspective. It analyzes how technological change, shifts in investment, and demographic transition are affecting potential economic growth globally and across major groups of economies. The contributors explore possible scenarios for the global economy as the digital revolution drives rapid technological change, including impacts on growth, jobs, income distribution, trade balances, and capital flows. Technology is changing the global configuration of comparative advantage and globalization increasingly has a digital dimension. The implications of these developments for the future of sectors such as manufacturing and for international trade are assessed. Part II of the book addresses new issues in the growth agenda from the perspective of an individual major economy: South Korea. The chapters in this section analyze how macroeconomic developments and technological change are influencing the behavior of households and firms in terms of their decisions to consume, save, and invest. Rising income and wealth inequalities are a major concern globally. Against this backdrop, trends in the labor income share and wage inequalities in South Korea are analyzed in terms of the role played by technology, industrial concentration, shifts in labor demand and supply, and other factors. Throughout the book, the contributors, in their analysis of both global and Korea-specific trends and prospects, place emphasis on drawing implications for policy.

Download or read book Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies written by Craig Leadley and published by Woodhead Publishing. This book was released on 2015-11-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies focuses on emerging and future trends in food manufacturing and supply chain technologies, examining the drivers of change and innovation in the food industry and the current and future ways of addressing issues such as energy reduction and rising costs in food manufacture. Part One looks at innovation in the food supply chain, while Part Two covers emerging technologies in food processing and packaging. Subsequent sections explore innovative food preservation technologies in themed chapters and sustainability and future research needs in food manufacturing. - Addresses issues such as energy reduction and rising costs in food manufacture - Assesses current supply chain technologies and the emerging advancements in the field, including key chapters on food processing technologies - Covers the complete food manufacturing scale, compiling significant research from academics and important industrial figures

Download or read book Frictionless Markets written by Jack Buffington and published by Springer. This book was released on 2015-09-15 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume models a 21st century supply chain: one that uses technology that leads to the power of the individual, not larger organizations. Author Jack Buffington explains how in the near future, each of us will be a “prosumer” in a peer-based economy of micro-level manufacturing with little waste and infinite customization. There are two primary schools of thought in regard to the world economy of the future; from one side is a belief that economic growth can continue in perpetuity, driven upon a cheap and plentiful energy supply. From the other point of view is a perspective that economic growth will soon end has due to a lack of cheap and plentiful oil, too much financial debt, and a damaged environment that cannot withstand more growth. Frictionless Markets proposes a third way: a 21st century model based upon an economic calculus that does assume that fossil fuels are rapidly depleting and the environment is being damaged, but does not assume that this means an end to growth, but rather, a beginning of opportunities. Frictionless Markets tells the story of why and how frictionless markets will exist by the year 2030. Dr. Jack Buffington is both a supply chain professional for one of the largest consumer products companies in the world, and a researcher in biotechnology and supply chain at the Royal Institute of Technology in Stockholm, Sweden.

Download or read book Manufacturing the Future written by Steve Brown and published by Financial Times/Prentice Hall. This book was released on 2000 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underpinned by extensive research, Manufacturing the Future highlights and reconfirms the importance of manufacturing strategy as part of the overall business strategy ? shows firms how to radically re-appraise the way they are organised, including the role of manufacturing personnel ? describes the importance of the role of senior manufacturing personnel to the business ? shows how to successfully apply manufacturing strategies, which feed into and form part of the overall success of the business strategy ? shows both why and how manufacturing firms need to move away from traditional, unsuccessful approaches to become an enlightened successful outfit.

Download or read book Implementing Industry 4 0 written by Carlos Toro and published by Springer Nature. This book was released on 2021-04-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book relates research being implemented in three main research areas: secure connectivity and intelligent systems, real-time analytics and manufacturing knowledge and virtual manufacturing. Manufacturing SMEs and MNCs want to see how Industry 4.0 is implemented. On the other hand, groundbreaking research on this topic is constantly growing. For the aforesaid reason, the Singapore Agency for Science, Technology and Research (A*STAR), has created the model factory initiative. In the model factory, manufacturers, technology providers and the broader industry can (i) learn how I4.0 technologies are implemented on real-world manufacturing use-cases, (ii) test process improvements enabled by such technologies at the model factory facility, without disrupting their own operations, (iii) co-develop technology solutions and (iv) support the adoption of solutions at their everyday industrial operation. The book constitutes a clear base ground not only for inspiration of researchers, but also for companies who will want to adopt smart manufacturing approaches coming from Industry 4.0 in their pathway to digitization.

Download or read book Entrepreneurial Nation Why Manufacturing is Still Key to America s Future written by Ro Khanna and published by McGraw Hill Professional. This book was released on 2012-08-22 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A call to arms for everyone who believes in America's future If you trust what you hear in the news, America is in trouble. We've moved our manufacturing overseas. We've lost our competitive edge to China, Germany, Japan, and Brazil. We've entered our final days as an economic leader. Don't believe it! This provocative book from a former deputy assistant secretary of commerce will explode the myths you’ve been fed by the media and reinforce your faith in American ingenuity. Author Ro Khanna takes you inside Washington's economic think tanks and onto the front lines of the most innovative companies in the nation. You'll discover: How small and large businesses are spurring innovation and growth Why the accepted wisdom about American manufacturing is wrong How America can stay ahead of lower-cost factories in China and Brazil Why manufacturing is so important to our national security and future How to keep the best jobs, companies, and opportunities here in America Despite everything you've heard about the economy, one fact remains: America continues to be a world leader in manufacturing. Some of the world's best products are still being made here. The world's greatest innovations are still being developed by Apple, Google, and countless others. This book will prove to you that smart companies are staying ahead of the curve--and you can, too. You'll learn how a fourth-generation business, the Globe Manufacturing Company, customized its firefighting suits to beat foreign competitors. You'll discover how Vitamix worked with clients like Starbucks to produce a superior coffee blender. And you'll hear behind-the-scenes stories from the American steel industry, aerospace companies, the defense technology sector, and other world-class leaders. You'll also learn why companies like Solyndra fail--and what lessons we can take from them. This is more than a book. It is a wake-up call that will spark debate, shatter beliefs, and inspire action in every American who wants to succeed in the future. This is Entrepreneurial Nation.

Download or read book Smart Digital Manufacturing written by Rene Wolf and published by John Wiley & Sons. This book was released on 2020-10-02 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world progresses toward Industry 4.0, and manufacturers are challenged to successfully navigate this unique digital journey. To some, digitalization is a golden opportunity; to others, it is a necessary evil. But to optimist and pessimist alike, there is a widespread puzzlement over the practical details of digitalization. To many manufacturers, digital transformation is a vague and confusing concept they nevertheless must grapple with in order to survive the Fourth Industrial Revolution. The proliferation of digital manufacturing technologies adds to the confusion, leaving many manufacturers perplexed and unprepared, with little real insight into how emerging technologies can help them sustain a competitive edge in their markets. This book effectively conveys Siemens's knowledge and experience through a concept called "Smart Digital Manufacturing," a stepwise approach to realizing the promise of the Fourth Industrial Revolution. The Smart Digital Manufacturing roadmap provides guidance and enables low-risk, high-reward adoption of new manufacturing software technologies through a series of tipping-point investment decisions that result in optimized manufacturing performance. The book provides readers with a clear understanding of what digital technology has to offer them, and how and when to invest in these essential components of tomorrow?s factories. René Wolf is Senior Vice President of Manufacturing Operations Management Software for Siemens Digital Industries Software, a business unit of the Siemens Digital Factory Division. Raffaello Lepratti is Vice President of Business Development and Marketing for Siemens Digital Industries Software.

Download or read book In Praise of Hard Industries written by Eamonn Fingleton and published by Houghton Mifflin Harcourt. This book was released on 1999 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In Praise of Hard Industries offers an authoritative and deeply disturbing counterargument to the many unexamined assumptions and glibly misstated facts that are driving our embrace of postindustrialism."--BOOK JACKET.