Download or read book Printed Flexible Sensors written by Anindya Nag and published by Springer. This book was released on 2019-03-11 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the design, fabrication and implementation of flexible printed sensors. It explores a range of materials for developing the electrode and substrate parts of the sensors, on the basis of their electrical and mechanical characteristics. The sensors were processed using laser cutting and 3D printing techniques, and the sensors developed were employed in a number of healthcare, environmental and industrial applications, including: monitoring of physiological movements, respiration, salinity and nitrate measurement, and tactile sensing. The type of sensor selected for each application depended on its dimensions, robustness and sensitivity. The sensors fabricated were also embedded in an IoT-based system, allowing them to be integrated into real-time applications.

Download or read book The Chemistry Of Inkjet Inks written by Shlomo Magdassi and published by World Scientific. This book was released on 2009-07-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern printing is based on digitizing information and then representing it on a substrate, such as paper, pixel by pixel. One of the most common methods of digital printing is through inkjet printers. The process of inkjet printing is very complicated, and the ink used must meet certain chemical and physicochemical requirements including those related to storage stability; jetting performance; color management; wetting; and adhesion on substrates. Obviously, these requirements — which represent different scientific disciplines such as colloid chemistry, chemical engineering, and physics — indicate the need for an interdisciplinary book that will cover all aspects of making and utilizing inkjet inks.This book provides basic and essential information on the important parameters which determine ink performance. It covers not only the conventional use of inkjet technology on graphic applications, but also the extension of this method to print various functional materials, such as the use of conductive inks to print light-emitting diodes (LEDs) and three-dimensional structures. Thus, the book will serve a large community: industrial chemists who deal with ink formulations and synthesis of chemicals for inks; chemical engineers and physicists who deal with the rheological and flow properties of inks; and researchers in academic institutes who seek to develop novel applications based on inkjet printing of new materials.

Download or read book Structural Health Monitoring of Aerospace Composites written by Victor Giurgiutiu and published by Academic Press. This book was released on 2015-09-08 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring of Aerospace Composite Structures offers a comprehensive review of established and promising technologies under development in the emerging area of structural health monitoring (SHM) of aerospace composite structures. Beginning with a description of the different types of composite damage, which differ fundamentally from the damage states encountered in metallic airframes, the book moves on to describe the SHM methods and sensors currently under consideration before considering application examples related to specific composites, SHM sensors, and detection methods. Expert author Victor Giurgiutiu closes with a valuable discussion of the advantages and limitations of various sensors and methods, helping you to make informed choices in your structure research and development. - The first comprehensive review of one of the most ardent research areas in aerospace structures, providing breadth and detail to bring engineers and researchers up to speed on this rapidly developing field - Covers the main classes of SHM sensors, including fiber optic sensors, piezoelectric wafer active sensors, electrical properties sensors and conventional resistance strain gauges, and considers their applications and limitation - Includes details of active approaches, including acousto-ultrasonics, vibration, frequency transfer function, guided-wave tomography, phased arrays, and electrochemical impedance spectroscopy (ECIS), among other emerging methods

Download or read book Die Attach Materials for High Temperature Applications in Microelectronics Packaging written by Kim S. Siow and published by Springer. This book was released on 2019-01-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the scientific principles, processing conditions, probable failure mechanisms, and a description of reliability performance and equipment required for implementing high-temperature and lead-free die attach materials. In particular, it addresses the use of solder alloys, silver and copper sintering, and transient liquid-phase sintering. While different solder alloys have been used widely in the microelectronics industry, the implementation of sintering silver and transient liquid-phase sintering remains limited to a handful of companies. Hence, the book devotes many chapters to sintering technologies, while simultaneously providing only a cursory coverage of the more widespread techniques employing solder alloys. Addresses the differences between sintering and soldering (the current die-attach technologies), thereby comprehensively addressing principles, methods, and performance of these high-temperature die-attach materials; Emphasizes the industrial perspective, with chapters written by engineers who have hands-on experience using these technologies; Baker Hughes, Bosch and ON Semiconductor, are represented as well as materials suppliers such as Indium; Simultaneously provides the detailed science underlying these technologies by leading academic researchers in the field.

Download or read book Nanoscience And Nanotechnology In Engineering written by Vijay K Varadan and published by World Scientific Publishing Company. This book was released on 2010-08-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The usage of nanoscience and nanotechnology in engineering directly links academic research in nanoscience and nanotechnology to industries and daily life. As a result, numerous nanomaterials, nanodevices and nanosystems for various engineering purposes have been developed and used for human betterment. This book, which consists of eight self-contained chapters, provides the essential theoretical knowledge and important experimental techniques required for the research and development on nanoscience and nanotechnology in engineering, and deals with the five key topics in this area — Nanoscience and Nanotechnology in Engineering is based on the many lectures and courses presented around the world by its authors.

Download or read book Flexible Carbon based Electronics written by Paolo Samorì and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume in the Advanced Nanocarbon Materials series covers the topic of flexible electronics both from a materials and an applications perspective. Comprehensive in its scope, the monograph examines organic, inorganic and composite materials with a section devoted to carbon-based materials with a special focus on the generation and properties of 2D materials. It also presents carbon modifications and derivatives, such as carbon nanotubes, graphene oxide and diamonds. In terms of the topical applications covered these include, but are not limited to, flexible displays, organic electronics, transistors, integrated circuits, semiconductors and solar cells. These offer perspectives for today?s energy and healthcare challenges, such as electrochemical energy storage and wearable devices. Finally, a section on fundamental properties and characterization approaches of flexible electronics rounds off the book. Each contribution points out the importance of the structure-function relationship for the target-oriented fabrication of electronic devices, enabling the design of complex components.

Download or read book Ceramic Nanocomposites written by Rajat Banerjee and published by Elsevier. This book was released on 2013-07-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials. - Reviews the structure and properties of ceramic nanocomposites as well as their manufacturing and applications - Examines properties of different ceramic nanocomposites, as well as failure mechanisms - Details the processing of nanocomposites and explores the applications of ceramic nanocomposites in areas such as energy production and the biomedical field

Download or read book Semiconducting Silicon Nanowires for Biomedical Applications written by Jeffery L. Coffer and published by Woodhead Publishing. This book was released on 2021-09-14 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its second, extensively revised second edition, Semiconducting Silicon Nanowires for Biomedical Applications reviews the fabrication, properties, and biomedical applications of this key material. The book begins by reviewing the basics of growth, characterization, biocompatibility, and surface modification of semiconducting silicon nanowires. Attention then turns to use of these structures for tissue engineering and delivery applications, followed by detection and sensing. Reflecting the evolution of this multidisciplinary subject, several new key topics are highlighted, including our understanding of the cell-nanowire interface, latest advances in associated morphologies (including silicon nanoneedles and nanotubes for therapeutic delivery), and significantly, the status of silicon nanowire commercialization in biotechnology. Semiconducting Silicon Nanowires for Biomedical Applications is a comprehensive resource for biomaterials scientists who are focused on biosensors, drug delivery, and the next generation of nano-biotech platforms that require a detailed understanding of the cell-nanowire interface, along with researchers and developers in industry and academia who are concerned with nanoscale biomaterials, in particular electronically-responsive structures. - Reviews the growth, characterization, biocompatibility, and surface modification of semiconducting silicon nanowires - Describes silicon nanowires for tissue engineering and delivery applications, including cellular binding & internalization, tissue engineering scaffolds, mediated differentiation of stem cells, and silicon nanoneedles & nanotubes for delivery of small molecule / biologic-based therapeutics - Highlights the use of silicon nanowires for detection and sensing - Presents a detailed description of our current understanding of the cell-nanowire interface - Covers the current status of commercial development of silicon nanowire-based platforms

Download or read book Carbon Nanotube Electronics written by Ali Javey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics. At the same time it provides specific examples of the state-of-the-art nanotube devices.

Download or read book Advanced Materials for Printed Flexible Electronics written by Colin Tong and published by Springer Nature. This book was released on 2021-10-04 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to printed flexible electronics and their applications, including the basics of modern printing technologies, printable inks, performance characterization, device design, modeling, and fabrication processes. A wide range of materials used for printed flexible electronics are also covered in depth. Bridging the gap between the creation of structure and function, printed flexible electronics have been explored for manufacturing of flexible, stretchable, wearable, and conformal electronics device with conventional, 3D, and hybrid printing technologies. Advanced materials such as polymers, ceramics, nanoparticles, 2D materials, and nanocomposites have enabled a wide variety of applications, such as transparent conductive films, thin film transistors, printable solar cells, flexible energy harvesting and storage devices, electroluminescent devices, and wearable sensors. This book provides students, researchers and engineers with the information to understand the current status and future trends in printed flexible electronics, and acquire skills for selecting and using materials and additive manufacturing processes in the design of printed flexible electronics.

Download or read book Triboelectric Nanogenerators written by Zhong Lin Wang and published by Springer. This book was released on 2016-08-17 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces an innovative and high-efficiency technology for mechanical energy harvesting. The book covers the history and development of triboelectric nanogenerators, basic structures, working principles, performance characterization, and potential applications. It is divided into three parts: Part A illustrates the fundamental working modes of triboelectric nanogenerators with their prototype structures and theoretical analysis; Part B and Part C introduce two categories of applications, namely self-powered systems and self-powered active sensors. The book will be an ideal guide to scientists and engineers beginning to study triboelectric nanogenerators or wishing to deepen their knowledge of the field. Readers will be able to place the technical details about this technology in context, and acquire the necessary skills to reproduce the experimental setups for fabrication and measurement.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Smart Textiles written by Nazire Deniz Yilmaz and published by John Wiley & Sons. This book was released on 2018-12-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Textiles: Wearable Nanotechnology provides a comprehensive presentation of recent advancements in the area of smart nanotextiles giving specific importance to materials and production processes. Different materials, production routes, performance characteristics, application areas and functionalization mechanisms are covered. The book provides a guideline to students, researchers, academicians and technologists who seek novel solutions in the related area by including groundbreaking advancements in different aspects of the diverse smart nanotextiles fields. This ground-breaking book is expected to spark an inspiration to allow future progress in smart nanotextiles research. The diversity of the topics, as well as the expert subject-matter contributors from all over the world representing various disciplines, ensure comprehensiveness and a broad understanding of smart nanotextiles.

Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.

Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science

Download or read book Stretchable Electronics written by Takao Someya and published by John Wiley & Sons. This book was released on 2013-01-29 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: On a daily basis, our requirements for technology become more innovative and creative and the field of electronics is helping to lead the way to more advanced appliances. This book gathers and evaluates the materials, designs, models, and technologies that enable the fabrication of fully elastic electronic devices that can tolerate high strain. Written by some of the most outstanding scientists in the field, it lays down the undisputed knowledge on how to make electronics withstand stretching. This monograph provides a review of the specific applications that directly benefit from highly compliant electronics, including transistors, photonic devices, and sensors. In addition to stretchable devices, the topic of ultraflexible electronics is treated, highlighting its upcoming significance for the industrial-scale production of electronic goods for the consumer. Divided into four parts covering: * Theory * Materials and Processes * Circuit Boards * Devices and Applications An unprecedented overview of this thriving area of research that nobody in the field - or intending to enter it - can afford to miss.

Download or read book Theory and Design for Mechanical Measurements written by Richard S. Figliola and published by John Wiley & Sons. This book was released on 2020-06-23 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Design for Mechanical Measurements merges time-tested pedagogy with current technology to deliver an immersive, accessible resource for both students and practicing engineers. Emphasizing statistics and uncertainty analysis with topical integration throughout, this book establishes a strong foundation in measurement theory while leveraging the e-book format to increase student engagement with interactive problems, electronic data sets, and more. This new Seventh edition has been updated with new practice problems, electronically accessible solutions, and dedicated Instructor Problems that ease course planning and assessment. Extensive coverage of device selection, test procedures, measurement system performance, and result reporting and analysis sets the field for generalized understanding, while practical discussion of data acquisition hardware, infrared imaging, and other current technologies demonstrate real-world methods and techniques. Designed to align with a variety of undergraduate course structures, this unique text offers a highly flexible pedagogical framework while remaining rigorous enough for use in graduate studies, independent study, or professional reference.