Download or read book Vibrations of Shells and Plates written by Werner Soedel and published by CRC Press. This book was released on 2004-08-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasingly sophisticated structures involved in modern engineering, knowledge of the complex vibration behavior of plates, shells, curved membranes, rings, and other complex structures is essential for today‘s engineering students, since the behavior is fundamentally different than that of simple structures such as rods and beams. Now in its

Download or read book Analysis of Thin Walled Beams written by Yoon Young Kim and published by Springer Nature. This book was released on 2023-05-20 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to an advanced beam theory applicable to thin-walled beams of rectangular and arbitrarily-shaped cross-sections. Furthermore, it describes a unique beam-based approach to handling joint structures consisting of thin-walled beams, compiled here for the first time. This higher-order beam theory (HoBT), developed by the authors over the past two decades, uses more than six degrees of freedom (DOFs) in contrast to the classical theories, which use only six DOFs. The additional degrees of freedom describe sectional deformations such as warping and distortion. This book presents a novel systematic procedure to derive the sectional deformations analytically for rectangular cross-sections and numerically for arbitrarily-shaped cross-sections. This book is a must for structural/mechanical engineers who wish to understand and design structures involving thin-walled beams.

Download or read book Thin Walled Composite Beams written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 2006-01-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.

Download or read book Analysis and Design of Elastic Beams written by Walter D. Pilkey and published by John Wiley & Sons. This book was released on 2002-11-20 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art coverage of modern computational methods for the analysis and design of beams Analysis and Design of Elastic Beams presents computer models and applications related to thin-walled beams such as those used in mechanical and aerospace designs, where thin, lightweight structures with high strength are needed. This book will enable readers to compute the cross-sectional properties of individual beams with arbitrary cross-sectional shapes, to apply a general-purpose computer analysis of a complete structure to determine the forces and moments in the individual members, and to use a unified approach for calculating the normal and shear stresses, as well as deflections, for those members' cross sections. In addition, this book augments a solid foundation in the basic structural design theory of beams by: * Providing coverage of thin-wall structure analysis and optimization techniques * Applying computer numerical methods to classical design methods * Developing computational solutions for cross-sectional properties and stresses using finite element analyses Including access to an associated Web site with software for the analysis and design of any cross-sectional shape, Analysis and Design of Elastic Beams: Computational Methods is an essential reference for mechanical, aerospace, and civil engineers and designers working in the automotive, ship, and aerospace industries in product and process design, machine design, structural design, and design optimization, as well as students and researchers in these areas.

Download or read book Beam Structures written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beam theories are exploited worldwide to analyze civil, mechanical, automotive, and aerospace structures. Many beam approaches have been proposed during the last centuries by eminent scientists such as Euler, Bernoulli, Navier, Timoshenko, Vlasov, etc. Most of these models are problem dependent: they provide reliable results for a given problem, for instance a given section and cannot be applied to a different one. Beam Structures: Classical and Advanced Theories proposes a new original unified approach to beam theory that includes practically all classical and advanced models for beams and which has become established and recognised globally as the most important contribution to the field in the last quarter of a century. The Carrera Unified Formulation (CUF) has hierarchical properties, that is, the error can be reduced by increasing the number of the unknown variables. This formulation is extremely suitable for computer implementations and can deal with most typical engineering challenges. It overcomes the problem of classical formulae that require different formulas for tension, bending, shear and torsion; it can be applied to any beam geometries and loading conditions, reaching a high level of accuracy with low computational cost, and can tackle problems that in most cases are solved by employing plate/shell and 3D formulations. Key features: compares classical and modern approaches to beam theory, including classical well-known results related to Euler-Bernoulli and Timoshenko beam theories pays particular attention to typical applications related to bridge structures, aircraft wings, helicopters and propeller blades provides a number of numerical examples including typical Aerospace and Civil Engineering problems proposes many benchmark assessments to help the reader implement the CUF if they wish to do so accompanied by a companion website hosting dedicated software MUL2 that is used to obtain the numerical solutions in the book, allowing the reader to reproduce the examples given in the book as well as to solve other problems of their own www.mul2.com Researchers of continuum mechanics of solids and structures and structural analysts in industry will find this book extremely insightful. It will also be of great interest to graduate and postgraduate students of mechanical, civil and aerospace engineering.

Download or read book Structural Analysis with the Finite Element Method Linear Statics written by Eugenio Oñate and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 1 : The Basis and Solids Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM). The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume1 presents the basis of the FEM for structural analysis and a detailed description of the finite element formulation for axially loaded bars, plane elasticity problems, axisymmetric solids and general three dimensional solids. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems. The book includes a chapter on miscellaneous topics such as treatment of inclined supports, elastic foundations, stress smoothing, error estimation and adaptive mesh refinement techniques, among others. The text concludes with a chapter on the mesh generation and visualization of FEM results. The book will be useful for students approaching the finite element analysis of structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis. STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 2: Beams, Plates and Shells Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM).The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume 2 presents a detailed description of the finite element formulation for analysis of slender and thick beams, thin and thick plates, folded plate structures, axisymmetric shells, general curved shells, prismatic structures and three dimensional beams. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems Emphasis is put on the treatment of structures with layered composite materials. The book will be useful for students approaching the finite element analysis of beam, plate and shell structures for the first time, as well as for practising engineers interested in the details of the formulation and performance of the different finite elements for practical structural analysis.

Download or read book Analysis of Shells Plates and Beams written by Holm Altenbach and published by Springer Nature. This book was released on 2020-06-03 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commemorates the 75th birthday of Prof. George Jaiani – Georgia’s leading expert on shell theory. He is also well known outside Georgia for his individual approach to shell theory research and as an organizer of meetings, conferences and schools in the field. The collection of papers presented includes articles by scientists from various countries discussing the state of the art and new trends in the theory of shells, plates, and beams. Chapter 20 is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book NASA Technical Paper written by and published by . This book was released on 1988 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book TEXTBOOK OF FINITE ELEMENT ANALYSIS written by P. SESHU and published by PHI Learning Pvt. Ltd.. This book was released on 2003-01-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for a one-semester course in Finite Element Method, this compact and well-organized text presents FEM as a tool to find approximate solutions to differential equations. This provides the student a better perspective on the technique and its wide range of applications. This approach reflects the current trend as the present-day applications range from structures to biomechanics to electromagnetics, unlike in conventional texts that view FEM primarily as an extension of matrix methods of structural analysis. After an introduction and a review of mathematical preliminaries, the book gives a detailed discussion on FEM as a technique for solving differential equations and variational formulation of FEM. This is followed by a lucid presentation of one-dimensional and two-dimensional finite elements and finite element formulation for dynamics. The book concludes with some case studies that focus on industrial problems and Appendices that include mini-project topics based on near-real-life problems. Postgraduate/Senior undergraduate students of civil, mechanical and aeronautical engineering will find this text extremely useful; it will also appeal to the practising engineers and the teaching community.

Download or read book Nonlinear Composite Beam Theory written by Dewey H. Hodges and published by Progress in Astronautics and A. This book was released on 2006 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: From an authoritative expert whose work on modern helicopter rotor blade analysis has spanned over three decades, comes the first consistent and rigorous presentation of beam theory. Beginning with an overview of the theory developed over the last 60 years, Dr. Hodges addresses the kinematics of beam deformation, provides a simple way to characterize strain in an initially curved and twisted beam, and offers cross-sectional analysis for beams with arbitrary cross sections and composed of arbitrary materials. He goes on to present a way to accurately recover all components of cross-sectional strain and stress before providing a natural one-dimensional (1-D) theory of beams. Sample results for both cross-sectional and 1-D analysis are presented as is a parallel treatment for thin-walled beams.

Download or read book Thin Walled Structures written by J. Loughlan and published by CRC Press. This book was released on 2018-02-06 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the Fourth International Conference of Thin-Walled Structures (ICTWS4), and contains 110 papers which, collectively, provide a comprehensive state-of-the-art review of the progress made in research, development and manufacture in recent years in thin-walled structures.The presentations at the conference had representation form 35 different countries and their topical areas of interest included aeroelastic response, structural-acoustic coupling, aerospace structures, analysis, design, manufacture, cold-formed structures, cyclic loading, dynamic loading, crushing, energy absorption, fatigue, fracture, damage tolerance, plates, stiffened panels, plated structures, polymer matrix composite members, sandwich structures, shell structures, thin-walled beams, columns and vibrational response. The range of applications of thin-walled structures has become increasingly diverse with a considerable deployment of thin-walled structural elements and systems being found in a wide range of areas within Aeronautical, Automotive, Civil, Mechanical, Chemical and Offshore Engineering fields. This volume is an extremely useful reference volume for researchers and designers working within a wide range of engineering disciplines towards the design, development and manufacture of efficient thin-walled structural systems.

Download or read book Analysis and Design of Plated Structures written by N.E. Shanmugam and published by Elsevier. This book was released on 2007-02-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plated structures are widely used in many engineering constructions ranging from aircraft to ships and from off-shore structures to bridges and buildings. Given their diverse use in severe dynamic loading environments, it is vital that their dynamic behaviour is analysed and understood. Analysis and design of plated structures Volume 2: Dynamics provides a concise review of the most recent research in the area and how it can be applied in the field.The book discusses the modelling of plates for effects such as transverse shear deformation and rotary inertia, assembly of plates in forming thin-walled members, and changing material properties in composite, laminated and functionally graded plates. Various recent techniques for linear and nonlinear vibration analysis are also presented and discussed. The book concludes with a hybrid strategy suitable for parameter identification of plated structures and hydroelastic analysis of floating plated structures.With its distinguished editors and team of international contributors, Analysis and design of plated structures Volume 2: Dynamics is an invaluable reference source for engineers, researchers and academics involved in the analysis and design of plated structures. It also provides a companion volume to Analysis and design of plated structures Volume 1: Stability. - The second of two volumes on plated structures - Provides a concise review of the most recent research in the research of plated structures - Discusses modelling of plates for specific effects

Download or read book An Improved First approximation Theory for Thin Shells written by J. Lyell Sanders and published by . This book was released on 1960 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thin walled Elastic Beams written by Vasiliǐ Zakharovich Vlasov and published by . This book was released on 1963 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory of Viscoelasticity written by R. M. Christensen and published by Courier Corporation. This book was released on 2013-04-26 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integration of theoretical developments offers complete description of linear theory of viscoelastic behavior of materials, with theoretical formulations derived from continuum mechanics viewpoint and discussions of problem solving. 1982 edition.

Download or read book Advances in Nonlinear Dynamics written by Walter Lacarbonara and published by Springer Nature. This book was released on 2022-03-18 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first of three volumes includes papers from the second series of NODYCON, which was held virtually in February of 2021. The conference papers reflect a broad coverage of topics in nonlinear dynamics, ranging from traditional topics from established streams of research to those from relatively unexplored and emerging venues of research. These include Fluid-structure interactions Mechanical systems and structures Computational nonlinear dynamics Analytical techniques Bifurcation and dynamic instability Rotating systems Modal interactions and energy transfer Nonsmooth systems