Download or read book A Feasibility Study for the Design of an Electromechanical Deep hole Boring Machine written by Darren N W. CURRIE and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deep Hole Drilling Feasibility Study written by Fenix & Scisson and published by . This book was released on 1969 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is feasible to drill a hole to a depth of 50,000 feet by utilizing conventional rotary drilling equipment and techniques. Existing equipment is capable of drilling the hole but modifications of some equipment items are warranted for completion of the lower portion of the hole. The whole could be started with presently available equipment as soon as funds are available, a location established, and a contractor selected. While the upper portion of the hole (20,000 - 30,000 ft.) is being drilled, equipment modifications could be made and supplemental equipment developed. This would allow time to make the equipment available when needed for the lower portion of the hole. Two locations are considered as established by the criteria, both in the Coast Ranges Province of California in the vicinity of the San Andreas Fault. One location would be in an area where granitic rock outcrops at the surface while the other would be in an area where the granitic is overlain by 10,000 feet of sediments. The estimated time to drill the hole under ideal conditions at either location is 4-3/4 years at an estimated cost of $20,000,000. [$400/ft].
Download or read book Feasibility Study And Design Of A Low cost Borehole Drilling Machine written by Paul Anthony Axelrod and published by . This book was released on 1983 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements written by and published by . This book was released on 1974 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1974 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Small Dams written by United States. Bureau of Reclamation and published by . This book was released on 1973 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book The Structuring of Organizations written by Henry Mintzberg and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesizes the empirical literature on organizationalstructuring to answer the question of how organizations structure themselves --how they resolve needed coordination and division of labor. Organizationalstructuring is defined as the sum total of the ways in which an organizationdivides and coordinates its labor into distinct tasks. Further analysis of theresearch literature is neededin order to builda conceptualframework that will fill in the significant gap left by not connecting adescription of structure to its context: how an organization actuallyfunctions. The results of the synthesis are five basic configurations (the SimpleStructure, the Machine Bureaucracy, the Professional Bureaucracy, theDivisionalized Form, and the Adhocracy) that serve as the fundamental elementsof structure in an organization. Five basic parts of the contemporaryorganization (the operating core, the strategic apex, the middle line, thetechnostructure, and the support staff), and five theories of how it functions(i.e., as a system characterized by formal authority, regulated flows, informalcommunication, work constellations, and ad hoc decision processes) aretheorized. Organizations function in complex and varying ways, due to differing flows -including flows of authority, work material, information, and decisionprocesses. These flows depend on the age, size, and environment of theorganization; additionally, technology plays a key role because of itsimportance in structuring the operating core. Finally, design parameters aredescribed - based on the above five basic parts and five theories - that areused as a means of coordination and division of labor in designingorganizational structures, in order to establish stable patterns of behavior.(CJC).
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1973 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Introduction to Basic Manufacturing Processes and Workshop Technology written by Rajender Singh and published by New Age International. This book was released on 2006-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The basic need is to provide theoretical and practical knowledge of manufacturing processes and workshop technology to all the engineering students. This book covers most of the syllabus of manufacturing processes/technology, workshop technology and workshop practices for engineering (diploma and degree) classes prescribed by different universities and state technical boards.
Download or read book Fundamentals of Digital Manufacturing Science written by Zude Zhou and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing industry will reap significant benefits from encouraging the development of digital manufacturing science and technology. Digital Manufacturing Science uses theorems, illustrations and tables to introduce the definition, theory architecture, main content, and key technologies of digital manufacturing science. Readers will be able to develop an in-depth understanding of the emergence and the development, the theoretical background, and the techniques and methods of digital manufacturing science. Furthermore, they will also be able to use the basic theories and key technologies described in Digital Manufacturing Science to solve practical engineering problems in modern manufacturing processes. Digital Manufacturing Science is aimed at advanced undergraduate and postgraduate students, academic researchers and researchers in the manufacturing industry. It allows readers to integrate the theories and technologies described with their own research works, and to propose new ideas and new methods to improve the theory and application of digital manufacturing science.
Download or read book Engineering written by Unesco and published by UNESCO. This book was released on 2010-01-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reviews engineering's importance to human, economic, social and cultural development and in addressing the UN Millennium Development Goals. Engineering tends to be viewed as a national issue, but engineering knowledge, companies, conferences and journals, all demonstrate that it is as international as science. The report reviews the role of engineering in development, and covers issues including poverty reduction, sustainable development, climate change mitigation and adaptation. It presents the various fields of engineering around the world and is intended to identify issues and challenges facing engineering, promote better understanding of engineering and its role, and highlight ways of making engineering more attractive to young people, especially women.--Publisher's description.
Download or read book Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2012-08-27 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods presents the concepts and details of applications of MADM methods. A range of methods are covered including Analytic Hierarchy Process (AHP), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), VIšekriterijumsko KOmpromisno Rangiranje (VIKOR), Data Envelopment Analysis (DEA), Preference Ranking METHod for Enrichment Evaluations (PROMETHEE), ELimination Et Choix Traduisant la Realité (ELECTRE), COmplex PRoportional ASsessment (COPRAS), Grey Relational Analysis (GRA), UTility Additive (UTA), and Ordered Weighted Averaging (OWA). The existing MADM methods are improved upon and three novel multiple attribute decision making methods for solving the decision making problems of the manufacturing environment are proposed. The concept of integrated weights is introduced in the proposed subjective and objective integrated weights (SOIW) method and the weighted Euclidean distance based approach (WEDBA) to consider both the decision maker’s subjective preferences as well as the distribution of the attributes data of the decision matrix. These methods, which use fuzzy logic to convert the qualitative attributes into the quantitative attributes, are supported by various real-world application examples. Also, computer codes for AHP, TOPSIS, DEA, PROMETHEE, ELECTRE, COPRAS, and SOIW methods are included. This comprehensive coverage makes Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods a key reference for the designers, manufacturing engineers, practitioners, managers, institutes involved in both design and manufacturing related projects. It is also an ideal study resource for applied research workers, academicians, and students in mechanical and industrial engineering.
Download or read book How the Body Shapes the Way We Think written by Rolf Pfeifer and published by MIT Press. This book was released on 2006-10-27 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of embodied intelligence and its implications points toward a theory of intelligence in general; with case studies of intelligent systems in ubiquitous computing, business and management, human memory, and robotics. How could the body influence our thinking when it seems obvious that the brain controls the body? In How the Body Shapes the Way We Think, Rolf Pfeifer and Josh Bongard demonstrate that thought is not independent of the body but is tightly constrained, and at the same time enabled, by it. They argue that the kinds of thoughts we are capable of have their foundation in our embodiment—in our morphology and the material properties of our bodies. This crucial notion of embodiment underlies fundamental changes in the field of artificial intelligence over the past two decades, and Pfeifer and Bongard use the basic methodology of artificial intelligence—"understanding by building"—to describe their insights. If we understand how to design and build intelligent systems, they reason, we will better understand intelligence in general. In accessible, nontechnical language, and using many examples, they introduce the basic concepts by building on recent developments in robotics, biology, neuroscience, and psychology to outline a possible theory of intelligence. They illustrate applications of such a theory in ubiquitous computing, business and management, and the psychology of human memory. Embodied intelligence, as described by Pfeifer and Bongard, has important implications for our understanding of both natural and artificial intelligence.
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Mechanical Turbines and Auxiliary Equipment written by A. Sherry and published by Elsevier. This book was released on 2013-10-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attention to types of turbines, construction of steam turbine cylinders and rotors, and gas and hydraulic turbines. The following chapters look at turbine auxiliary systems such as glands and sealing systems, lubrication systems, governors and governing gear; feed water heating systems, feed heater arrangement, and regenerative cycle calculations; and design and construction of condensers. The final chapter is devoted to miscellaneous station services and pipework in power plants and discusses water services, compressed air services, heating and ventilation, and miscellaneous cranes and lifting tackle. This volume will be of interest to power station engineers.
