Download or read book A Direct Performance Based Seismic Design Method for Irregular Structures Applications to Concrete Structures written by Luis Alberto Montoya Coronado and published by . This book was released on 2017 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Displacement based Seismic Design of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief summary of the history of seismic design as given in chapter 1, indicates that initially design was purely based on strength or force considerations. When the importance of displacement, however, became better appreciated, it was attempted to modify the existing force-based approach in order to include considerations of displacement, rather than to totally reconsider the procedure on a more rational basis. In the last decade, then, several researchers started pointing out this inconsistency, proposing displacement-based approaches for earthquake engineering evaluation and design, with the aim of providing improved reliability in the engineering process by more directly relating computed response and expected structural performance. The main objective of this report is to summarize, critically review and compare the displacement - based approaches proposed in the literature, thus favouring code implementation and practical use of rational and reliable methods. Chapter 2 Seismic performance and design objectives of this report introduces concepts of performance levels, seismic hazard representation, and the coupling of performance and hazard to define performance objectives. In fact, for displacement analysis to be relevant in the context of performance-based design, the structural engineer must select appropriate performance levels and seismic loadings. A critical review of some engineering limit states appropriate to the different performance levels is therefore proposed. In chapter 3 Conceptual basis for displacement-based earthquake resistant design, the fundamental principles associated with displacement of the ground during an earthquake and the effects, in terms of displacement, in the structure, are reviewed. The historical development guides the presentation with a review of general linear and nonlinear structural dynamics principles, general approaches to estimate displacement, for both ground and structure, and finally a general presentation of the means to measure and judge the appropriateness of the displacements of the structure in section. Chapter 4 Approaches and procedures for displacement-based design can be somehow considered the fundamental part of the report, since a critical summary of the displacement - based approaches proposed by different researchers is presented there. Displacement - based design may require specific characterization of the input ground motion, a topic addressed in Chapter 5 Seismic input. In general, various pertinent definitions of input motion for non-code format analysis are included, while peak ground parameters necessary for code base shear equations are only addressed as needed for the definition of motion for analysis. Chapter 6 Displacement capacity of members and systems addresses the fundamental problem of evaluating the inelastic displacement capacity of reinforced concrete members and realistic values of their effective cracked stiffness at yielding, including effects of shear and inclined cracking, anchorage slip, bar buckling and of load cycling. In Chapter 7 Application and evaluation of displacement-based approaches, some of the many different displacement based design procedures briefly introduced in Chapter 4 are applied to various case studies, identifying and discussing the difficulties a designer may encounter when trying to use displacement based design. Results for five different case studies designed in accordance with eight different displacement based design methods are presented. Although in general case studies are considered a useful but marginal part of a state of the art document, in this case it has to be noted that chapter 7 is possibly the most innovative and fundamental part of the whole report. The conclusions of chapter 7 are the fundamental and essential conclusions of the document and allow foreseeing a bright future for displacement - based design approaches. The state-of-art report has been elaborated over a period of 4 years by Task Group 7.2 Displacement-based design and assessment of fib Commission 7Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In October 2002 the final draft of the Bulletin was presented to the public during the 1st fibCongress in Osaka. It was also there that it was approved by fib Commission 7Seismic Design.

Download or read book Performance Based Seismic Design of Concrete Structures and Infrastructures written by Plevris, Vagelis and published by IGI Global. This book was released on 2017-02-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid design and craftsmanship are a necessity for structures and infrastructures that must stand up to natural disasters on a regular basis. Continuous research developments in the engineering field are imperative for sustaining buildings against the threat of earthquakes and other natural disasters. Performance-Based Seismic Design of Concrete Structures and Infrastructures is an informative reference source on all the latest trends and emerging data associated with structural design. Highlighting key topics such as seismic assessments, shear wall structures, and infrastructure resilience, this is an ideal resource for all academicians, students, professionals, and researchers that are seeking new knowledge on the best methods and techniques for designing solid structural designs.

Download or read book Displacement based Seismic Design of Structures written by M. J. N. Priestley and published by Iuss Press. This book was released on 2007 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Displacement-Based Seismic Design of Structures is a book primarily directed towards practicing structural designers who are interested in applying performance-based concepts to seismic design. Since much of the material presented in the book has not been published elsewhere, it will also be of considerable interest to researchers, and to graduate and upper-level undergraduate students of earthquake engineering who wish to develop a deeper understanding of how design can be used to control seismic response. The design philosophy is based on determination of the optimum structural strength to achieve a given performance limit state, related to a defined level of damage, under a specified level of seismic intensity. Emphasis is also placed on how this strength is distributed through the structure. This takes two forms: methods of structural analysis and capacity design. It is shown that equilibrium considerations frequently lead to a more advantageous distribution of strength than that resulting from stiffness considerations. Capacity design considerations have been re-examined, and new and more realistic design approaches are presented to insure against undesirable modes of inelastic deformation. The book considers a wide range of structural types, including separate chapters on frame buildings, wall buildings, dual wall/frame buildings, masonry buildings, timber structures, bridges, structures with isolation or added damping devices, and wharves. These are preceded by introductory chapters discussing conceptual problems with current force-based design, seismic input for displacement-based design, fundamentals of direct displacement-based design, and analytical tools appropriate for displacement-based design. The final two chapters adapt the principles of displacement-based seismic design to assessment of existing structures, and present the previously developed design information in the form of a draft building code. The text is illustrated by copious worked design examples (39 in all), and analysis aids are provided in the form of a CD containing three computer programs covering moment-curvature analysis (Cumbia), linear-element-based inelastic time-history analysis (Ruaumoko), and a general fibre-element dynamic analysis program (SeismoStruct). The design procedure developed in this book is based on a secant-stiffness (rather than initial stiffness) representation of structural response, using a level of damping equivalent to the combined effects of elastic and hysteretic damping. The approach has been fully verified by extensive inelastic time history analyses, which are extensively reported in the text. The design method is extremely simple to apply, and very successful in providing dependable and predictable seismic response. Authors Bios M.J.N.Priestley Nigel Priestley is Professor Emeritus of the University of California San Diego, and co-Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS), Pavia, Italy. He has published more than 450 papers, mainly on earthquake engineering, and received numerous awards for his research. He holds honorary doctorates from ETH, Zurich, and Cujo, Argentina. He is co-author of two previous seismic design books “Seismic Design of Concrete and Masonry Buildings” and “Seismic Design and Retrofit of Bridges”, that are considered standard texts on the subjects. G.M.Calvi Michele Calvi is Professor of the University of Pavia and Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS) of Pavia. He has published more than 200 papers and is co-author of the book “Seismic Design and Retrofit of Bridges”, that is considered a standard text on the subject, has been involved in important construction projects worldwide, such as the Rion Bridge in Greece and the upgrading of the Bolu Viaduct in Turkey, and is coordinating several international research projects. M.J.Kowalsky Mervyn Kowalsky is Associate Professor of Structural Engineering in the Department of Civil, Construction, and Environmental Engineering at North Carolina State University and a member of the faculty of the ROSE School. His research, which has largely focused on the seismic behaviour of structures, has been supported by the National Science Foundation, the North Carolina and Alaska Departments of Transportation, and several industrial organizations. He is a registered Professional Engineer in North Carolina and an active member of several national and international committees on Performance-Based Seismic Design.

Download or read book Probabilistic performance based seismic design written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-05-07 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last ten to fifteen years a vast amount of research has been undertaken to improve on earlier methods for analysing the seismic reliability of structures. These efforts focused on identifying aspects of prominent relevance and disregarding the inessential ones, with the goal of producing methods that are both more efficient and easier to use in practice. Today this goal can be said to be substantially achieved. During these years scientific activity covered all of the many aspects involved in such a multi-disciplinary problem, ranging from seismology, to geotechnics, to structural analysis and economy, all of them to be consistently organised into a probabilistic framework. As the output of this research was dispersed into a multitude of technical papers, fib Commission 7 thought it worthwhile to select the essential aspects of this large body of knowledge and to present them into a coherent and accessible document for structural engineers. To this end a task group of specialists was formed, whose qualifications come from their personal involvement in the above-mentioned developments throughout this period of time. From its inception the group decided that the bulletin should have had a distinct educational character and provide a clear overview of the methods available. The outcome is a compact volume that starts by introducing the concepts and definitions of performance-based engineering, continues with two chapters on assessment and design, respectively, presenting the methods in detail accompanied by illustrative examples, and concludes with an appendix with sample programming excerpts for their implementation. It is believed that at present fib Bulletin 68 represents a unique compendium on probabilistic performance-based seismic design.

Download or read book Performance Based Seismic Design of Structures written by Satyabrata Choudhury and published by . This book was released on 2024-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Seismic design of structures is fast turning to Performance-Based design (PBD) from old codal force-based design (FBD) method. The aim of the book is to expose readers to the meaning and need of PBD, the evolution of PBD to date, its various forms, and applications. Various design philosophies and procedures have been described including modelling aspects and hazard considerations backed by examples. Direct displacement-based design (DDBD) and Unified PBD (UPBD) of reinforced concrete (RC) frame buildings, RC dual systems, steel frame buildings, bridge piers have also been explained. Features: Illustrates performance-based seismic design to achieve the design target by performance objective-oriented design procedure. Covers modern design philosophies, modelling aspects, concepts in nonlinearities and use of supplemental damping devices. Contains chapter on seismic safety of non-structural components. Describes UPBD design procedure and example of different structural systems. Includes application and examples with reference to SAP2000 software. This book is aimed at graduate students, researchers and professionals in civil and earthquake engineering, and structural design"--

Download or read book Seismic Performance of Concrete Buildings written by Liviu Crainic and published by CRC Press. This book was released on 2012-12-10 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines and presents essential aspects of the behavior, analysis, design and detailing of reinforced concrete buildings subjected to strong seismic activity. Seismic design is an extremely complex problem that has seen spectacular development in the last decades. The present volume tries to show how the principles and methods of earthquake engineering can be applied to seismic analysis and design of reinforced concrete buildings. The book starts with an up-to-date presentation of fundamental aspects of reinforced concrete behavior quantified through constitutive laws for monotonic and hysteretic loading. Basic concepts of post-elastic analysis like plastic hinge, plastic length, fiber models, and stable and unstable hysteretic behaviour are, accordingly, defined and commented upon. For a deeper understanding of seismic design philosophy and of static and dynamic post-elastic analysis, seismic behavior of different types of reinforced concrete structures (frames, walls) is examined in detail. Next, up-to-date methods for analysis and design are presented. The powerful concept of structural system is defined and systematically used to explain the response to seismic activity, as well as the procedures for analysis and detailing of common building structures. Several case studies are presented. The book is not code-oriented. The structural design codes are subject to constant reevaluation and updating. Rather than presenting code provisions, this book offers a coherent system of notions, concepts and methods, which facilitate understanding and application of any design code. The content of this book is based mainly on the authors’ personal experience which is a combination of their teaching and research activity as well as their work in the private sector as structural designers. The work will serve to help students and researchers, as well as structural designers to better understand the fundamental aspects of behavior and analysis of reinforced concrete structures and accordingly to gain knowledge that will ensure a sound design of buildings.

Download or read book Seismic Design of Reinforced Concrete Structures for Controlled Inelastic Response written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1998 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed guide is designed to enable the reader to understand the relative importance of the numerous parameters involved in seismic design and the relationships between them, as well as the motivations behind the choices adopted by the codes.

Download or read book Dynamic Behaviour of Reinforced Concrete Frames Designed with Direct Displacement Based Design written by J. Didier Pettinga and published by . This book was released on 2005 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Seismic Design Optimization and Earthquake Engineering Formulations and Applications written by Plevris, Vagelis and published by IGI Global. This book was released on 2012-05-31 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the past few years, there has been extensive research done on structural design in terms of optimization methods or problem formulation. But, much of this attention has been on the linear elastic structural behavior, under static loading condition. Such a focus has left researchers scratching their heads as it has led to vulnerable structural configurations. What researchers have left out of the equation is the element of seismic loading. It is essential for researchers to take this into account in order to develop earthquake resistant real-world structures. Structural Seismic Design Optimization and Earthquake Engineering: Formulations and Applications focuses on the research around earthquake engineering, in particular, the field of implementation of optimization algorithms in earthquake engineering problems. Topics discussed within this book include, but are not limited to, simulation issues for the accurate prediction of the seismic response of structures, design optimization procedures, soft computing applications, and other important advancements in seismic analysis and design where optimization algorithms can be implemented. Readers will discover that this book provides relevant theoretical frameworks in order to enhance their learning on earthquake engineering as it deals with the latest research findings and their practical implementations, as well as new formulations and solutions.

Download or read book Seismic Design Assessment and Retrofitting of Concrete Buildings written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2009-07-25 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the historic first European seismic code, this professional book focuses on seismic design, assessment and retrofitting of concrete buildings, with thorough reference to, and application of, EN-Eurocode 8. Following the publication of EN-Eurocode 8 in 2004-05, 30 countries are now introducing this European standard for seismic design, for application in parallel with existing national standards (till March 2010) and exclusively after that. Eurocode 8 is also expected to influence standards in countries outside Europe, or at the least, to be applied there for important facilities. Owing to the increasing awareness of the threat posed by existing buildings substandard and deficient buildings and the lack of national or international standards for assessment and retrofitting, its impact in that field is expected to be major. Written by the lead person in the development of the EN-Eurocode 8, the present handbook explains the principles and rationale of seismic design according to modern codes and provides thorough guidance for the conceptual seismic design of concrete buildings and their foundations. It examines the experimental behaviour of concrete members under cyclic loading and modelling for design and analysis purposes; it develops the essentials of linear or nonlinear seismic analysis for the purposes of design, assessment and retrofitting (especially using Eurocode 8); and gives detailed guidance for modelling concrete buildings at the member and at the system level. Moreover, readers gain access to overviews of provisions of Eurocode 8, plus an understanding for them on the basis of the simple models of the element behaviour presented in the book. Also examined are the modern trends in performance- and displacement-based seismic assessment of existing buildings, comparing the relevant provisions of Eurocode 8 with those of new US prestandards, and details of the most common and popular seismic retrofitting techniques for concrete buildings and guidance for retrofitting strategies at the system level. Comprehensive walk-through examples of detailed design elucidate the application of Eurocode 8 to common situations in practical design. Examples and case studies of seismic assessment and retrofitting of a few real buildings are also presented. From the reviews: "This is a massive book that has no equal in the published literature, as far as the reviewer knows. It is dense and comprehensive and leaves nothing to chance. It is certainly taxing on the reader and the potential user, but without it, use of Eurocode 8 will be that much more difficult. In short, this is a must-read book for researchers and practitioners in Europe, and of use to readers outside of Europe too. This book will remain an indispensable backup to Eurocode 8 and its existing Designers’ Guide to EN 1998-1 and EN 1998-5 (published in 2005), for many years to come. Congratulations to the author for a very well planned scope and contents, and for a flawless execution of the plan". AMR S. ELNASHAI "The book is an impressive source of information to understand the response of reinforced concrete buildings under seismic loads with the ultimate goal of presenting and explaining the state of the art of seismic design. Underlying the contents of the book is the in-depth knowledge of the author in this field and in particular his extremely important contribution to the development of the European Design Standard EN 1998 - Eurocode 8: Design of structures for earthquake resistance. However, although Eurocode 8 is at the core of the book, many comparisons are made to other design practices, namely from the US and from Japan, thus enriching the contents and interest of the book". EDUARDO C. CARVALHO

Download or read book Seismic Behaviour and Design of Irregular and Complex Civil Structures III written by Dietlinde Köber and published by Springer Nature. This book was released on 2020-03-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art knowledge on problems of the effects of structural irregularities on their seismic response. It also covers specific spatial and rotational seismic loads on these structures. Rapid progress in respective research on irregular structures and unconventional seismic loads requires prompt updates of the state of the art in this area. These problems are of particular interest to both researchers and practitioners because these are non-conservative effects compared with the approach of the traditional seismic design (e.g. Eurocode 8, Uniform Building Code etc.). This book will be of particular interest to researchers, PhD students and engineers dealing with design of structures under seismic excitations.

Download or read book Criteria for the Seismic Vulnerability Reduction of Existing Irregular Reinforced Concrete Structures written by Elena Mola and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The research is a contribution to the development of tools and criteria for the seismic assessment and retrofitting of existing reinforced concrete structures, in particular plan-wise irregular ones. ln fact, the 'capacity design' method, based on the rationale of the equal displacernent rule and the central role of ductility, and usually employed for the design of new structures, does not automatically extend to existing irregular structures.The work is thoroughly based on a large scale experimental activity carried out in the framework of the EC-funded project SPEAR (Seismic Performance Assessment and Rehabilitation) and consisting of a series of pseudodynamic tests on a full-size plan-wise irregular three storey frame structure, bath in the as-built and in two different retrofitted configurations. Based on the experimental data, the research attempted at first at clarifying the basic features of the seismic response of such structures ; following to that, the proposed criteria for the reduction of their seismic vulnerability and for the design of effective rehabilitation interventions were presented. To this end, the experimental approach was complemented by the numerical one, with the creation of a numerical model into a finite element structural analysis software and the application of the Karhunen-Loeve nonlinear modal analysis method

Download or read book Performance based Plastic Design written by Subhash Chandra Goel and published by . This book was released on 2008-01-01 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design Methods for Steel Building Structures written by George A. Papagiannopoulos and published by Springer Nature. This book was released on 2022-01-01 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book, after two introductory chapters on seismic design principles and structural seismic analysis methods, proceeds with the detailed description of seismic design methods for steel building structures. These methods include all the well-known methods, like force-based or displacement-based methods, plus some other methods developed by the present authors or other authors that have reached a level of maturity and are applicable to a large class of steel building structures. For every method, detailed practical examples and supporting references are provided in order to illustrate the methods and demonstrate their merits. As a unique feature, the present book describes not just one, as it is the case with existing books on seismic design of steel structures, but various seismic design methods including application examples worked in detail. The book is a valuable source of information, not only for MS and PhD students, but also for researchers and practicing engineers engaged with the design of steel building structures.

Download or read book Performance Based Seismic Engineering of Buildings pt 1 Interim recommendations pt 2 Conceptual framework written by Structural Engineers Association of California. Vision 2000 Committee and published by . This book was released on 1995 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Criteria for the Seismic Vulnerability Reduction of Existing Irregular Reinforced Concrete Structures written by Elena Mola and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The research is a contribution to the development of tools and criteria for the seismic assessment and retrofitting of existing reinforced concrete structures, in particular plan-wise irregular ones. ln fact, the 'capacity design' method, based on the rationale of the equal displacernent rule and the central role of ductility, and usually employed for the design of new structures, does not automatically extend to existing irregular structures.The work is thoroughly based on a large scale experimental activity carried out in the framework of the EC-funded project SPEAR (Seismic Performance Assessment and Rehabilitation) and consisting of a series of pseudodynamic tests on a full-size plan-wise irregular three storey frame structure, bath in the as-built and in two different retrofitted configurations. Based on the experimental data, the research attempted at first at clarifying the basic features of the seismic response of such structures ; following to that, the proposed criteria for the reduction of their seismic vulnerability and for the design of effective rehabilitation interventions were presented. To this end, the experimental approach was complemented by the numerical one, with the creation of a numerical model into a finite element structural analysis software and the application of the Karhunen-Loeve nonlinear modal analysis method