Download or read book A Dictionary of Scientific Units written by H. G. Jerrard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: and by the Librarians and Staffs ofthe University and the Public Libraries at Southampton. Finally, we wish to thank Mrs H. G. Jerrard and Miss A. J. Tutte for typing the manuscript. Department of Physics H. G. JERRARD University of Southampton D. B. McNEILL 1963 Preface to the fifth edition Since the publication of the fourth edition in 1980 advances in technology have led to more precise values of the fundamental physical constants and a movement towards definitions of the fundamental units of mass, length and time based on atomic parameters. More precise definitions of some other units such as the candela have been approved by the international committees. These changes, together with the definitions of several new units have been included in this edition, the text of which has been revised and which now contains over 850 units and dimensionless numbers. The authors wish to thank all those who have helped in this latest compilation by suggestion and kindly criticism and Margaret Wainwright who has had the difficult and tedious task of typing, retyping and copying the fragmented parts that arise from a text revision. At the time of going to press we believe this book to provide the most complete and up-to-date information of its kind available.
Download or read book Dictionary of Scientific Units written by H. G. Jerrard and published by Springer. This book was released on 2012-11-26 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: units have been included. References, which now number approximately 650, have been brought up to date. The most recently accepted values of the physical constants have been provided. Our thanks go to all those who, since the fifth edition, have helped in this revision by suggestions. In particular the authors express their gratitude to Jane M. Jerrard who, with enthusiasm, put the text into a computer and eliminated the editorial scissors and paste and simplified the onerous and long task of producing a text from the fragmented material of the revision. In the preface to the fifth edition it was suggested that the book provided at that time the most complete and up-to-date information of its kind available. The authors again make the same claim for this sixth edition. H. G. JERRARD D. B. McNEILL Warsash Newtownards Southampton Northern Ireland England Preface to the first edition The intense specialization that occurs in science today has meant that scientists working in one field are often not familiar with the nomenclature used by their colleagues in other fields. This is particularly so in physics. This dictionary is designed to help overcome this difficulty by giving information about the units, dimensionless numbers and scales which have been used, or are still being used, throughout the world. Some four hundred entries are provided and these are supplemented by about five hundred references. The definition of each entry is given together with relevant historical facts.
Download or read book Dictionary of Scientific Units written by H. G. Jerrard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: units have been included. References, which now number approximately 650, have been brought up to date. The most recently accepted values of the physical constants have been provided. Our thanks go to all those who, since the fifth edition, have helped in this revision by suggestions. In particular the authors express their gratitude to Jane M. Jerrard who, with enthusiasm, put the text into a computer and eliminated the editorial scissors and paste and simplified the onerous and long task of producing a text from the fragmented material of the revision. In the preface to the fifth edition it was suggested that the book provided at that time the most complete and up-to-date information of its kind available. The authors again make the same claim for this sixth edition. H. G. JERRARD D. B. McNEILL Warsash Newtownards Southampton Northern Ireland England Preface to the first edition The intense specialization that occurs in science today has meant that scientists working in one field are often not familiar with the nomenclature used by their colleagues in other fields. This is particularly so in physics. This dictionary is designed to help overcome this difficulty by giving information about the units, dimensionless numbers and scales which have been used, or are still being used, throughout the world. Some four hundred entries are provided and these are supplemented by about five hundred references. The definition of each entry is given together with relevant historical facts.
Download or read book A Dictionary of Scientific Units written by H. G. Jerrard and published by Chapman & Hall. This book was released on 1972 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: 400 entries supplemented by about 500 references to sources. Gives definition, relevant historical facts, and, usually, some indication of the magnitude of the unit. Arrangement is alphabetical by name of unit. Appendixes give table of fundamental physical constants, details of standardization committees and conferences, a table of British and American weights and measures, and conversion tables. In the latest edition "particular attention has been given to SI units and tables are provided which give the factors needed to convert CGS to SI values and vice-versa."--Pref. Indexed.
Download or read book A Dictionary of Scientific Units written by H. G. Jerrard and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: and by the Librarians and Staffs of the University and the Public Libraries at Southampton. Finally, we wish to thank Mrs H. G. Jerrard and Miss A. J. Tutte for typing the manuscript. Department of Physics H. G. JERRARD D. B. McNEILL University of Southampton 1963 Preface to the fifth ed ition Since the publication of the fourth edition in 1980 advances in technology have led to more precise values of the fundamental physical constants and a movement towards definitions of the fundamental units of mass, length and time based on atomic parameters. More precise definitions of some other units such as the candela have been approved by the international committees. These changes, together with the definitions of several new units have been included in this edition, the text of which has been revised and which now contains over 850 units and dimensionless numbers. The authors wish to thank all those who have helped in this latest compilation by suggestion and kindly criticism and Margaret Wainwright who has had the difficult and tedious task oftyping, retyping and copying the fragmented parts that arise from a text revision. At the time of going to press we believe this book to provide the most complete and up-to-date information of its kind available.
Download or read book Information Sources in Science and Technology written by C. C. Parker and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Sources in Science and Technology: A Practical Guide to Traditional and Online Use presents a selection of traditional and online methods of using information sources in science and technology, including people, organizations, literature, hosts, and databases. This text serves as a reference book that helps the reader choose sources of information and their guides, includes a routine for finding and using information, and offers tips on searching and obtaining literature in a usable form. This book is comprised of nine chapters and begins by explaining how to choose type(s) of information source that is likely to be most helpful. The chapters that follow present guides on people, organizations, and literature as sources of information. A chapter on information services focuses on those organizations that supply information or references to information that could be helpful. These services range from answering telephone queries to supplying collections of relevant documents, and from broadcast television information to direct connection with computer databases. The next chapters discuss ways of searching the literature and computer databases, obtaining literature in a usable form, and organizing and presenting information. This book concludes by considering current awareness or keeping up-to-date with information about recent developments. This monograph is intended for librarians and information officers, especially for those working in scientific or industrial environments, practicing scientists and engineers, and students associated with these professions.
Download or read book Guide to Sources for Agricultural and Biological Research written by J. Richard Blanchard and published by Univ of California Press. This book was released on 2023-07-28 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is part of UC Press's Voices Revived program, which commemorates University of California Press’s mission to seek out and cultivate the brightest minds and give them voice, reach, and impact. Drawing on a backlist dating to 1893, Voices Revived makes high-quality, peer-reviewed scholarship accessible once again using print-on-demand technology. This title was originally published in 1981.
Download or read book Guide to Information Sources in Mathematics and Statistics written by Martha A. Tucker and published by Bloomsbury Publishing USA. This book was released on 2004-09-30 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a reference for librarians, mathematicians, and statisticians involved in college and research level mathematics and statistics in the 21st century. We are in a time of transition in scholarly communications in mathematics, practices which have changed little for a hundred years are giving way to new modes of accessing information. Where journals, books, indexes and catalogs were once the physical representation of a good mathematics library, shelves have given way to computers, and users are often accessing information from remote places. Part I is a historical survey of the past 15 years tracking this huge transition in scholarly communications in mathematics. Part II of the book is the bibliography of resources recommended to support the disciplines of mathematics and statistics. These are grouped by type of material. Publication dates range from the 1800's onwards. Hundreds of electronic resources-some online, both dynamic and static, some in fixed media, are listed among the paper resources. Amazingly a majority of listed electronic resources are free.
Download or read book Book catalog of the Library and Information Services Division written by Environmental Science Information Center. Library and Information Services Division and published by . This book was released on 1977 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Book Catalog of the Library and Information Services Division Author title series indexes written by Environmental Science Information Center. Library and Information Services Division and published by . This book was released on 1977 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Core List for an Environmental Reference Collection written by and published by . This book was released on 2002 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Polymers written by D.W. van Krevelen and published by Elsevier. This book was released on 2012-12-02 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions summarizes the latest developments regarding polymers, their properties in relation to chemical structure, and methods for estimating and predicting numerical properties from chemical structure. In particular, it examines polymer electrical properties, magnetic properties, and mechanical properties, as well as their crystallization and environmental behavior and failure. The rheological properties of polymer melts and polymer solutions are also considered. Organized into seven parts encompassing 27 chapters, this book begins with an overview of polymer science and engineering, including the typology of polymers and their properties. It then turns to a discussion of thermophysical properties, from transition temperatures to volumetric and calorimetric properties, along with the cohesive aspects and conformation statistics. It also introduces the reader to the behavior of polymers in electromagnetic and mechanical fields of force. The book covers the quantities that influence the transport of heat, momentum, and matter, particularly heat conductivity, viscosity, and diffusivity; properties that control the chemical stability and breakdown of polymers; and polymer properties as an integral concept, with emphasis on processing and product properties. Readers will find tables that give valuable (numerical) data on polymers and include a survey of the group contributions (increments) of almost every additive function considered. This book is a valuable resource for anyone working on practical problems in the field of polymers, including organic chemists, chemical engineers, polymer processers, polymer technologists, and both graduate and PhD students.
Download or read book Unification of Classical Quantum and Relativistic Mechanics and of the Four Forces written by J. X. Zheng-Johansson and published by Nova Publishers. This book was released on 2006 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book Drs J X Zheng-Johansson and Per-Ivar Johansson present a remarkable unification scheme. The scheme is based on an analysis of the overall experimental observations available up to today, and an observation of the unsolved problems maintained in contemporary theoretical physics, revisiting past controversies and putting them in context with contemporary physics. The unsolved problems were the agent stimulating the authors to invent a new bold unification scheme. Vacuum polarisation, with a vacuuon (a pair of strongly bound opposite-signed charges) as a free entity, gets you back to the days of the ether concept, abandoned by physics after the Michelson-Morley experiment by the end of the 19:th century. Starting from constructing the fundamental building blocks for the vacuum and material particles, the Newtonian-Maxwellian solutions the authors obtain yield insights into fundamental concepts such as vacuum, charge, and mass. For instance, can vacuum be described by a building block denoted vacuuon, with or without mass depending on pushed into motion or not? Can free charges be described as a mass-less entity? Can and how vacuum polarise? However, even if vacuum in the real Universe never polarises as proposed in this unification scheme, it may yet serve as another tool in the physics toolbox, a theoretical bridge between classical and modern physics. Physics and physical theory is a human invention, a mathematical description of the intrinsic properties of the Universe and its associated phenomena. Our understanding of the Universe is a reaction of our mind, of our way of understanding. Richard Feynman once noted about the Maxwell equations something that goes like: If a mathematical theory in physics cannot be proved by experiments it remains to be proved mathematically. Ultimately, it must be possible to test any new theory by experiments. If experimental tests are not possible we are left with a mere hypothesis based on equations. The unification scheme proposed by this work consists of a Proposition about the fundamental building blocks (ap- and n-vaculeon) and a series of Predictions from Newtonian-Maxwellian solutions based on that Proposition. The arriving at the Proposition and the Predictions, relating to classical, quantum and relativistic mechanics, is their context. The book is a challenge out of the ordinary, a challenge that deserves careful consideration.
Download or read book Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: First multi-year cumulation covers six years: 1965-70.
Download or read book National Library of Medicine Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1971 with total page 1324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laws and Models written by Carl W. Hall and published by CRC Press. This book was released on 2018-10-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "laws" that govern our physical universe come in many guises-as principles, theorems, canons, equations, axioms, models, and so forth. They may be empirical, statistical, or theoretical, their names may reflect the person who first expressed them, the person who publicized them, or they might simply describe a phenomenon. However they may be named, the discovery and application of physical laws have formed the backbone of the sciences for 3,000 years. They exist by thousands. Laws and Models: Science, Engineering, and Technology-the fruit of almost 40 years of collection and research-compiles more than 1,200 of the laws and models most frequently encountered and used by engineers and technologists. The result is a collection as fascinating as it is useful. Each entry consists of a statement of the law or model, its date of origin, a one-line biography of the people involved in its formulation, sources of information about the law, and cross-references. Illustrated and highly readable, this book offers a unique presentation of the vast and rich collection of laws that rule our universe. Everyone with an interest in the inner workings of nature-from engineers to students, from teachers to journalists-will find Laws and Models to be not only a handy reference, but an engaging volume to read and browse.
Download or read book University of California Union Catalog of Monographs Cataloged by the Nine Campuses from 1963 Through 1967 Authors titles written by University of California (System). Institute of Library Research and published by . This book was released on 1972 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:
