Download or read book A Development of Design and Control Methodology for Next Generation Parallel Hybrid Electric Vehicle written by Lin Lai and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercially available Hybrid Electric Vehicles (HEVs) have been around for more than ten years. However, their market share remains small. Focusing only on the improvement of fuel economy, the design tends to reduce the size of the internal combustion engine in the HEV, and uses the electrical drive to compensate for the power gap between the load demand and the engine capacity. Unfortunately, the low power density and the high cost of the combined electric motor drive and battery packs dictate that the HEV has either worse performance or much higher price than the conventional vehicle. In this research, a new design philosophy for parallel HEV is proposed, which uses a full size engine to guarantee the vehicle performance at least as good as the conventional vehicle, and hybridizes with an electrical drive in parallel to improve the fuel economy and performance beyond the conventional cars. By analyzing the HEV fuel economy versus the increasing of the electrical drive power on typical driving conditions, the optimal hybridization electric power capacity is determined. Thus, the full size engine HEV shows significant improvement in fuel economy and performance, with relatively short cost recovery period. A new control strategy, which optimizes the fuel economy of parallel configured charge sustained hybrid electric vehicles, is proposed in the second part of this dissertation. This new approach is a constrained engine on-off strategy, which has been developed from the two extreme control strategies of maximum SOC and engine on-off, by taking their advantages and overcoming their disadvantages. A system optimization program using dynamic programming algorithm has been developed to calibrate the control parameters used in the developed control strategy, so that the control performance can be as close to the optimal solution as possible. In order to determine the sensitivity of the new control strategy to different driving conditions, a passenger car is simulated on different driving cycles. The performances of the vehicle with the new control strategy are compared with the optimal solution obtained on each driving condition with the dynamic programming optimization. The simulation result shows that the new control strategy always keeps its performance close to the optimal one, as the driving condition changes. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/149289

Download or read book Electric and Hybrid Vehicles written by Amir Khajepour and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level introductory book covering fundamental aspects, design and dynamics of electric and hybrid electric vehicles There is significant demand for an understanding of the fundamentals, technologies, and design of electric and hybrid electric vehicles and their components from researchers, engineers, and graduate students. Although there is a good body of work in the literature, there is still a great need for electric and hybrid vehicle teaching materials. Electric and Hybrid Vehicles: Technologies, Modeling and Control – A Mechatronic Approach is based on the authors’ current research in vehicle systems and will include chapters on vehicle propulsion systems, the fundamentals of vehicle dynamics, EV and HEV technologies, chassis systems, steering control systems, and state, parameter and force estimations. The book is highly illustrated, and examples will be given throughout the book based on real applications and challenges in the automotive industry. Designed to help a new generation of engineers needing to master the principles of and further advances in hybrid vehicle technology Includes examples of real applications and challenges in the automotive industry with problems and solutions Takes a mechatronics approach to the study of electric and hybrid electric vehicles, appealing to mechanical and electrical engineering interests Responds to the increase in demand of universities offering courses in newer electric vehicle technologies

Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Woodhead Publishing. This book was released on 2022-07-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. - Provides a fully updated reference with significant technological advances and developments in the sector - Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements - Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry

Download or read book Introduction to Hybrid Vehicle System Modeling and Control written by Wei Liu and published by John Wiley & Sons. This book was released on 2013-02-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an engineering reference book on hybrid vehicle system analysis and design, an outgrowth of the author's substantial work in research, development and production at the National Research Council Canada, Azure Dynamics and now General Motors. It is an irreplaceable tool for helping engineers develop algorithms and gain a thorough understanding of hybrid vehicle systems. This book covers all the major aspects of hybrid vehicle modeling, control, simulation, performance analysis and preliminary design. It not only systemically provides the basic knowledge of hybrid vehicle system configuration and main components, but also details their characteristics and mathematic models. Provides valuable technical expertise necessary for building hybrid vehicle system and analyzing performance via drivability, fuel economy and emissions Built from the author's industry experience at major vehicle companies including General Motors and Azure Dynamics Inc. Offers algorithm implementations and figures/examples extracted from actual practice systems Suitable for a training course on hybrid vehicle system development with supplemental materials An essential resource enabling hybrid development and design engineers to understand the hybrid vehicle systems necessary for control algorithm design and developments.

Download or read book Electric and Hybrid Vehicles written by Iqbal Husain and published by CRC Press. This book was released on 2011-06-27 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated to encompass the significant technological advances since the publication of the first edition, Electric and Hybrid Vehicles: Design Fundamentals, Second Edition presents the design fundamentals, component sizing, and systems interactions of alternative vehicles. This new edition of a widely praised, bestselling textbook maintains the comprehensive, systems-level perspective of electric and hybrid vehicles while covering the hybrid architectures and components of the vehicle in much greater detail. The author emphasizes technical details, mathematical relationships, and design guidelines throughout the text. New to the Second Edition New chapters on sizing and design guidelines for various hybrid architectures, control strategies for hybrid vehicles, powertrain component cooling systems, and in-vehicle communication methods New sections on modeling of energy storage components, tire-road force mechanics, compressed air-storage, DC/DC converters, emission control systems, electromechanical brakes, and vehicle fuel economy Reorganization of power electronics, electric machines, and motor drives sections Enhanced sections on mechanical components that now include more technical descriptions and example problems An emphasis on the integration of mechanical and electrical components, taking into account the interdisciplinary nature of automotive engineering As an advisor to the University of Akron’s team in the Challenge X: Crossover to Sustainable Mobility, Dr. Husain knows first-hand how to teach students both the fundamentals and cutting-edge technologies of the next generation of automotives. This text shows students how electrical and mechanical engineers must work together to complete an alternative vehicle system. It empowers them to carry on state-of-the-art research and development in automotive engineering in order to meet today’s needs of clean, efficient, and sustainable vehicles.

Download or read book Hybrid Systems Optimal Control and Hybrid Vehicles written by Thomas J. Böhme and published by Springer. This book was released on 2017-02-01 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assembles new methods showing the automotive engineer for the first time how hybrid vehicle configurations can be modeled as systems with discrete and continuous controls. These hybrid systems describe naturally and compactly the networks of embedded systems which use elements such as integrators, hysteresis, state-machines and logical rules to describe the evolution of continuous and discrete dynamics and arise inevitably when modeling hybrid electric vehicles. They can throw light on systems which may otherwise be too complex or recondite. Hybrid Systems, Optimal Control and Hybrid Vehicles shows the reader how to formulate and solve control problems which satisfy multiple objectives which may be arbitrary and complex with contradictory influences on fuel consumption, emissions and drivability. The text introduces industrial engineers, postgraduates and researchers to the theory of hybrid optimal control problems. A series of novel algorithmic developments provides tools for solving engineering problems of growing complexity in the field of hybrid vehicles. Important topics of real relevance rarely found in text books and research publications—switching costs, sensitivity of discrete decisions and there impact on fuel savings, etc.—are discussed and supported with practical applications. These demonstrate the contribution of optimal hybrid control in predictive energy management, advanced powertrain calibration, and the optimization of vehicle configuration with respect to fuel economy, lowest emissions and smoothest drivability. Numerical issues such as computing resources, simplifications and stability are treated to enable readers to assess such complex systems. To help industrial engineers and managers with project decision-making, solutions for many important problems in hybrid vehicle control are provided in terms of requirements, benefits and risks.

Download or read book Modern Electric Hybrid Electric and Fuel Cell Vehicles written by Mehrdad Ehsani and published by CRC Press. This book was released on 2017-12-19 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air pollution, global warming, and the steady decrease in petroleum resources continue to stimulate interest in the development of safe, clean, and highly efficient transportation. Building on the foundation of the bestselling first edition, Modern Electric, Hybrid Electric, and Fuel Cell Vehicles: Fundamentals, Theory, and Design, Second Edition updates and expands its detailed coverage of the vehicle technologies that offer the most promising solutions to these issues affecting the automotive industry. Proven as a useful in-depth resource and comprehensive reference for modern automotive systems engineers, students, and researchers, this book speaks from the perspective of the overall drive train system and not just its individual components. New to the second edition: A case study appendix that breaks down the Toyota Prius hybrid system Corrections and updates of the material in the first edition Three new chapters on drive train design methodology and control principles A completely rewritten chapter on Fundamentals of Regenerative Braking Employing sufficient mathematical rigor, the authors comprehensively cover vehicle performance characteristics, EV and HEV configurations, control strategies, modeling, and simulations for modern vehicles. They also cover topics including: Drive train architecture analysis and design methodologies Internal Combustion Engine (ICE)-based drive trains Electric propulsion systems Energy storage systems Regenerative braking Fuel cell applications in vehicles Hybrid-electric drive train design The first edition of this book gave practicing engineers and students a systematic reference to fully understand the essentials of this new technology. This edition introduces newer topics and offers deeper treatments than those included in the first. Revised many times over many years, it will greatly aid engineers, students, researchers, and other professionals who are working in automotive-related industries, as well as those in government and academia.

Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2011-05-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Hybrid Electric Vehicles provides vital guidance to help a new generation of engineers master the principles of and further advance hybrid vehicle technology. The authors address purely electric, hybrid electric, plug-in hybrid electric, hybrid hydraulic, fuel cell, and off-road hybrid vehicle systems. They focus on the power and propulsion systems for these vehicles, including issues related to power and energy management. They concentrate on material that is not readily available in other hybrid electric vehicle (HEV) books such as design examples for hybrid vehicles, and cover new developments in the field including electronic CVT, plug-in hybrid, and new power converters and controls. Covers hybrid vs. pure electric, HEV system architecture (including plug-in and hydraulic), off-road and other industrial utility vehicles, non-ground-vehicle applications like ships, locomotives, aircrafts, system reliability, EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Contains core fundamentals and principles of modern hybrid vehicles at component level and system level. Provides graduate students and field engineers with a text suitable for classroom teaching or self-study.

Download or read book Electric and Plug In Hybrid Vehicles written by Bogdan Ovidiu Varga and published by Springer. This book was released on 2015-06-12 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as an interdisciplinary platform for specialists working in electric and plug-in hybrid electric vehicles powertrain design and development, and for scientists who want to get access to information related to electric and hybrid vehicle energy management, efficiency and control. The book presents the methodology of simulation that allows the specialist to evaluate electric and hybrid vehicle powertrain energy flow, efficiency, range and consumption. The mathematics behind each electric and hybrid vehicle component is explained and for each specific vehicle the powertrain is analyzed and output results presented through the use of specific automotive industrial software (AVL Cruise , IPG CarMaker, AVL Concerto). This methodology of electric and hybrid powertrain design serves to broaden understanding of how the energy flow, efficiency, range and consumption of these vehicles can be adjusted, updated and predicted via development processes.

Download or read book Full vehicle Model Development of a Hybrid Electric Vehicle and Development of a Controls Testing Framework written by Arjun Khanna and published by . This book was released on 2016 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly stringent regulations on emissions require automobile manufacturers to find new ways to reduce the emissions produced by their vehicles. If current trends provide an indication of where the automotive industry is headed, hybrid electric vehicles (HEVs) and electric vehicles (EVs) will become prevalent in the market in coming years. These technologies are all relatively new and still need much development before they can hold a significant place in the automotive market. It is for this reason that companies are investing heavily in training the next generation of engineers to work on this problem. EcoCAR 3, a four year long Advanced Vehicle Technology Competition (AVTC), is one way companies are pursuing the training of future engineers. EcoCAR 3 challenges the engineering students to modify a stock Chevrolet Camaro, donated by GM, to reduce the vehicle’s energy consumption and tailpipe emissions, while maintaining standard vehicle performance. Currently, the competition just ended its second year and is beginning year 3. During year 1, the team focused on selecting the powertrain architecture for the Chevrolet Camaro and procuring components from different suppliers. The vehicle architecture that met the goals of both the competition and the team is a Post-transmission Plug-in Hybrid Electric Vehicle (PHEV) configuration. During Year 2, the team’s major goals were to mechanically and electrically design the different subsystems, have the entire vehicle integrated and have the vehicle run on its electric propulsion system. Having the vehicle to run by the end of the year 2 required the team to develop controls in parallel to the mechanical and electrical integration of the vehicle. In order to successfully accomplish all the goals in a timely manner the team followed a Model-Based Design (MBD) approach. The work described in this project focuses on the development process that was followed during the development of a full-vehicle model: EcoSIM 3 in the MATLAB/Simulink environment. The mode assisted in 3 major tasks during year 2; 1. Estimate the vehicle’s fuel economy and performance; 2. Mechanical and electrical design; 3. Controls development (verification and validation). An industrial-grade framework to verify and validate the controllers developed by the team was also created. This framework utilizes multiple software programs; IBM DOORS, dSPACE software suite, and Motohawk in parallel with MATLAB and Simulink. Using multiple tools enabled the team to manage and trace the requirements, link these requirements to their respective test cases, and give the team the ability to perform automated and regression testing for the controls developed by the team.

Download or read book Optimal Control of Hybrid Vehicles written by Bram de Jager and published by Springer Science & Business Media. This book was released on 2013-04-05 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Control of Hybrid Vehicles provides a description of power train control for hybrid vehicles. The background, environmental motivation and control challenges associated with hybrid vehicles are introduced. The text includes mathematical models for all relevant components in the hybrid power train. The power split problem in hybrid power trains is formally described and several numerical solutions detailed, including dynamic programming and a novel solution for state-constrained optimal control problems based on the maximum principle. Real-time-implementable strategies that can approximate the optimal solution closely are dealt with in depth. Several approaches are discussed and compared, including a state-of-the-art strategy which is adaptive for vehicle conditions like velocity and mass. Three case studies are included in the book: • a control strategy for a micro-hybrid power train; • experimental results obtained with a real-time strategy implemented in a hybrid electric truck; and • an analysis of the optimal component sizes for a hybrid power train. Optimal Control of Hybrid Vehicles will appeal to academic researchers and graduate students interested in hybrid vehicle control or in the applications of optimal control. Practitioners working in the design of control systems for the automotive industry will also find the ideas propounded in this book of interest.

Download or read book Hybrid Electric Vehicle System Modeling and Control written by Wei Liu and published by John Wiley & Sons. This book was released on 2017-04-17 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition includes approximately 30% new materials covering the following information that has been added to this important work: extends the contents on Li-ion batteries detailing the positive and negative electrodes and characteristics and other components including binder, electrolyte, separator and foils, and the structure of Li-ion battery cell. Nickel-cadmium batteries are deleted. adds a new section presenting the modelling of multi-mode electrically variable transmission, which gradually became the main structure of the hybrid power-train during the last 5 years. newly added chapter on noise and vibration of hybrid vehicles introduces the basics of vibration and noise issues associated with power-train, driveline and vehicle vibrations, and addresses control solutions to reduce the noise and vibration levels. Chapter 10 (chapter 9 of the first edition) is extended by presenting EPA and UN newly required test drive schedules and test procedures for hybrid electric mileage calculation for window sticker considerations. In addition to the above major changes in this second edition, adaptive charging sustaining point determination method is presented to have a plug-in hybrid electric vehicle with optimum performance.

Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2017-09-11 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest developments in the field of hybrid electric vehicles Hybrid Electric Vehicles provides an introduction to hybrid vehicles, which include purely electric, hybrid electric, hybrid hydraulic, fuel cell vehicles, plug-in hybrid electric, and off-road hybrid vehicular systems. It focuses on the power and propulsion systems for these vehicles, including issues related to power and energy management. Other topics covered include hybrid vs. pure electric, HEV system architecture (including plug-in & charging control and hydraulic), off-road and other industrial utility vehicles, safety and EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Hybrid Electric Vehicles, Second Edition is a comprehensively updated new edition with four new chapters covering recent advances in hybrid vehicle technology. New areas covered include battery modelling, charger design, and wireless charging. Substantial details have also been included on the architecture of hybrid excavators in the chapter related to special hybrid vehicles. Also included is a chapter providing an overview of hybrid vehicle technology, which offers a perspective on the current debate on sustainability and the environmental impact of hybrid and electric vehicle technology. Completely updated with new chapters Covers recent developments, breakthroughs, and technologies, including new drive topologies Explains HEV fundamentals and applications Offers a holistic perspective on vehicle electrification Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives, Second Edition is a great resource for researchers and practitioners in the automotive industry, as well as for graduate students in automotive engineering.

Download or read book Energy Efficient Non Road Hybrid Electric Vehicles written by Johannes Unger and published by Springer. This book was released on 2016-02-10 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the main problems in the real-time control of parallel hybrid electric powertrains in non-road applications that work in continuous high dynamic operation. It also provides practical insights into maximizing the energy efficiency and drivability of such powertrains. It introduces an energy-management control structure, which considers all the physical powertrain constraints and uses novel methodologies to predict the future load requirements to optimize the controller output in terms of the entire work cycle of a non-road vehicle. The load prediction includes a methodology for short-term loads as well as cycle detection methodology for an entire load cycle. In this way, the energy efficiency can be maximized, and fuel consumption and exhaust emissions simultaneously reduced. Readers gain deep insights into the topics that need to be considered in designing an energy and battery management system for non-road vehicles. It also becomes clear that only a combination of management systems can significantly increase the performance of a controller.

Download or read book Electric Vehicle Design written by Krishan Arora and published by John Wiley & Sons. This book was released on 2024-04-18 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: ELECTRIC VEHICLE DESIGN This book will serve as a definitive guide to conceptual and practical knowledge about the design of hybrid electrical vehicles (HEV), battery electrical vehicles (BEV), fuel cell electrical vehicles (FCEV), plug-in hybrid electrical vehicles (PHEV), and efficient EV charging techniques with advanced tools and methodologies for students, engineers, and academics alike. This book deals with novel concepts related to fundamentals, design, and applications of conventional automobiles with internal combustion engines (ICEs), electric vehicles (EVs), hybrid electric vehicles (HEVs), and fuel cell vehicles (FCVs). It broadly covers vehicle performance, configuration, control strategy, design methodology, modeling, and simulation for different conventional and hybrid vehicles based on mathematical equations. Fundamental and practical examples of conventional electrical machines, advanced electrical machines, battery energy sources, on-board charging and off-board charging techniques, and optimization methods are presented here. This book can be useful for students, researchers, and practitioners interested in different problems and challenges associated with electric vehicles. Furthermore, in explaining the design methodology of each drive train, design examples are presented with simulation results.

Download or read book Control System Design for a Parallel Hybrid Electric Vehicle written by David Leighton Buntin and published by . This book was released on 1994 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hybrid Electric Vehicle Design and Control Intelligent Omnidirectional Hybrids written by Yangsheng Xu and published by McGraw Hill Professional. This book was released on 2013-09-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build state-of-the-art intelligent omnidirectional HEVs Engineer high-performance, low-emission automobiles by overcoming traditional obstacles and efficiently harnessing energy from multiple sources. Hybrid Electric Vehicle Design and Control features complete coverage of all electrical, mechanical, and software components. Find out how to develop fast-charging battery systems, efficiently manage power, implement independent steering and force control, and enhance driving stability and controllability. This comprehensive guide offers detailed modeling, testing, and tuning techniques and provides an overview of emerging developments in hybrid technologies. Coverage includes: 4WIS and 4WID hardware and software Hybrid vehicle design structures Zero-radius turning and lateral parking Steer-by-wire and extended steering Behavior-based and zero-radius steering Traction force distribution and stability Battery, energy, and power management systems Cell equalization and fast-charging control MPC, load forecasting, and neural network classifi cation Best performance techniques