Download or read book Computational Methods in Multiphase Flow IV written by A.A. Mammoli and published by WIT Press. This book was released on 2007-05-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Dynamics is one of the most important topics of applied mathematics and physics. Together with complex flows and turbulence, multiphase flows remains one of the most challenging areas of computational mechanics, and even seemingly simple problems remain unsolved to date. Multiphase flows are found in all areas of technology, at all length scales and flow regimes. The fluids involved can be compressible or incompressible, linear or nonlinear. Because of the complexity of the problem, it is often essential to utilize advanced computational and experimental methods to solve the complex equations that describe them. Challenges in these simulations include nonlinear fluids, treating drop breakup and coalescence, characterizing phase structures, and many others.This volume brings together work presented at the Fourth International Conference on Computational and Experimental Methods in Multiphase and Complex Flows. Featured topics include: Suspensions; Bubble and Drop Dynamics; Flow in Porous Media; Interfaces; Turbulent Flow; Injectors and Nozzles; Particle Image Velocimetry; Macroscale Constitutive Models; Large Eddy Simulation; Finite Volumes; Interface Tracking Methods; Biological Flows; Environmental Multiphase Flow; Phase Changes and Stochastic Modelling.

Download or read book Advances in Hydraulics and Hydroinformatics written by Jianguo Zhou and published by MDPI. This book was released on 2020-12-29 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue reports on recent research trends in hydraulics, hydrodynamics, and hydroinformatics, and their novel applications in practical engineering. The Issue covers a wide range of topics, including open channel flows, sediment transport dynamics, two-phase flows, flow-induced vibration and water quality. The collected papers provide insight into new developments in physical, mathematical, and numerical modelling of important problems in hydraulics and hydroinformatics, and include demonstrations of the application of such models in water resources engineering.

Download or read book Air Bubble Entrainment in Free Surface Turbulent Shear Flows written by Hubert Chanson and published by Elsevier. This book was released on 1996-10-11 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops an analysis of the air entrainment processes in free-surface flows. These flows are investigated as homogeneous mixtures with variable density. Several types of air-water free-surface flows are studied: plunging jet flows, open channel flows, and turbulent water jets discharging into air. Experimental observations reported by the author confirm the concept that the air-water mixture behaves as a homogeneous compressible fluid in each case. This book will be of great interest to professionals working in many fields of engineering: chemical, civil, environmental, mechanical, mining, metallurgy, and nuclear. Covers new information on the air-water flow field: air bubble distributions, air-water velocity profiles, air bubble sizes and bubble-turbulence interactions Features new analysis is developed for each flow configuration and compared successfully with model and prototype data Includes over 372 references and more than 170 figures with over 60 photographs Presents useful information for design engineers and research-and-development scientists who require a better understanding of the fluid mechanics of air-water flows

Download or read book Water Resource Modeling and Computational Technologies written by Mohammad Zakwan and published by Elsevier. This book was released on 2022-10-22 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water Resource Modeling and Computational Technologies, Seventh Edition provides the reader with a comprehensive overview of the applications that computational techniques have in various sectors of water resource engineering. The book explores applications of recent modeling and computational techniques in various sectors of water resource engineering, including hydroinformatics, irrigation engineering, climate change, hydrologic forecasting, floods, droughts, image processing, GIS, water quality, aquifer mapping, basin scale modeling, computational fluid dynamics, numerical modeling of surges and groundwater flow, river engineering, optimal reservoir operation, multipurpose projects, and water resource management. As such, this is a must read for hydrologists, civil engineers and water resource managers. - Presents contributed chapters from global experts in the field of water resources from both a science and engineering perspective - Includes case studies throughout, providing readers with an opportunity to understand how case specific challenges can help with computational techniques - Provides basic concepts as well as a literature review on the application of computational techniques in various sectors of water resources

Download or read book Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow written by S. Hernández and published by WIT Press. This book was released on 2021-08-31 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of fluid mechanics is vast and has numerous and diverse applications. Presented papers from the 11th International Conference on Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow are contained in this book and cover a wide range of topics, including basic formulations and their computer modelling as well as the relationship between experimental and analytical results. Innovation in fluid-structure approaches including emerging applications as energy harvesting systems, studies of turbulent flows at high Reynold number, or subsonic and hypersonic flows are also among the topics covered. The emphasis placed on multiphase flow in the included research works is due to the fact that fluid dynamics processes in nature are predominantly multi-phased, i.e. involving more than one phase of a component such as liquid, gas or plasma. The range of related problems of interest is vast: astrophysics, biology, geophysics, atmospheric processes, and a large variety of engineering applications. Multiphase fluid dynamics are generating a great deal of interest, leading to many notable advances in experimental, analytical, and numerical studies in this area. While progress is continuing in all three categories, advances in numerical solutions are likely the most conspicuous, owing to the continuing improvements in computer power and the software tools available to researchers. Progress in numerical methods has not only allowed for the solution of many practical problems but also helped to improve our understanding of the physics involved. Many unresolved issues are inherent in the very definition of multiphase flow, where it is necessary to consider coupled processes on multiple scales, as well as the interplay of a wide variety of relevant physical phenomena.

Download or read book Hydraulic Research in the United States written by and published by . This book was released on 1966 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Air Problems in Pipelines written by Manuela Escarameia and published by . This book was released on 2005-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Diffusion Hydrodynamic Model written by Theodore V. Hromadka II and published by BoD – Books on Demand. This book was released on 2020-09-09 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Diffusion Hydrodynamic Model (DHM), as presented in the 1987 USGS publication, was one of the first computational fluid dynamics computational programs based on the groundwater program MODFLOW, which evolved into the control volume modeling approach. Over the following decades, others developed similar computational programs that either used the methodology and approaches presented in the DHM directly or were its extensions that included additional components and capacities. Our goal is to demonstrate that the DHM, which was developed in an age preceding computer graphics/visualization tools, is as robust as any of the popular models that are currently used. We thank the USGS for their approval and permission to use the content from the earlier USGS report.

Download or read book Computational Methods for Fluid Dynamics written by Joel H. Ferziger and published by Springer. This book was released on 2019-08-16 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a guide to numerical methods for solving fluid dynamics problems. The most widely used discretization and solution methods, which are also found in most commercial CFD-programs, are described in detail. Some advanced topics, like moving grids, simulation of turbulence, computation of free-surface flows, multigrid methods and parallel computing, are also covered. Since CFD is a very broad field, we provide fundamental methods and ideas, with some illustrative examples, upon which more advanced techniques are built. Numerical accuracy and estimation of errors are important aspects and are discussed in many examples. Computer codes that include many of the methods described in the book can be obtained online. This 4th edition includes major revision of all chapters; some new methods are described and references to more recent publications with new approaches are included. Former Chapter 7 on solution of the Navier-Stokes equations has been split into two Chapters to allow for a more detailed description of several variants of the Fractional Step Method and a comparison with SIMPLE-like approaches. In Chapters 7 to 13, most examples have been replaced or recomputed, and hints regarding practical applications are made. Several new sections have been added, to cover, e.g., immersed-boundary methods, overset grids methods, fluid-structure interaction and conjugate heat transfer.

Download or read book Energy Dissipation in Hydraulic Structures written by Hubert Chanson and published by CRC Press. This book was released on 2015-05-12 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in technology have permitted the construction of large dams, reservoirs and channels. This progress has necessitated the development of new design and construction techniques, particularly with the provision of adequate flood release facilities. Chutes and spillways are designed to spill large water discharges over a hydraulic struc

Download or read book Advances in Numerical Methods written by Nikos Mastorakis and published by Springer Science & Business Media. This book was released on 2009-07-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Numerical Methods features contributions from distinguished researchers, focused on significant aspects of current numerical methods and computational mathematics. The increasing necessity to present new computational methods that can solve complex scientific and engineering problems requires the preparation of this volume with actual new results and innovative methods that provide numerical solutions in effective computing times. Each chapter will present new and advanced methods and modern variations on known techniques that can solve difficult scientific problems efficiently.

Download or read book Hydraulic Modelling An Introduction written by Pavel Novak and published by CRC Press. This book was released on 2018-10-24 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms a vital part of all engineering design, yet many hydraulic engineers are not fully aware of the assumptions they make. These assumptions can have important consequences when choosing the best model to inform design decisions. Considering the advantages and limitations of both physical and mathematical methods, this book will help you identify the most appropriate form of analysis for the hydraulic engineering application in question. All models require the knowledge of their background, good data and careful interpretation and so this book also provides guidance on the range of accuracy to be expected of the model simulations and how they should be related to the prototype. Applications to models include: open channel systems closed conduit flows storm drainage systems estuaries coastal and nearshore structures hydraulic structures. This an invaluable guide for students and professionals.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1990 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic Engineering of Dams written by Willi H. Hager and published by CRC Press. This book was released on 2020-11-05 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic engineering of dams and their appurtenant structures counts among the essential tasks to successfully design safe water-retaining reservoirs for hydroelectric power generation, flood retention, and irrigation and water supply demands. In view of climate change, especially dams and reservoirs, among other water infrastructure, will and have to play an even more important role than in the past as part of necessary mitigation and adaptation measures to satisfy vital needs in water supply, renewable energy and food worldwide as expressed in the Sustainable Development Goals of the United Nations. This book deals with the major hydraulic aspects of dam engineering considering recent developments in research and construction, namely overflow, conveyance and dissipations structures of spillways, river diversion facilities during construction, bottom and low-level outlets as well as intake structures. Furthermore, the book covers reservoir sedimentation, impulse waves and dambreak waves, which are relevant topics in view of sustainable and safe operation of reservoirs. The book is richly illustrated with photographs, highlighting the various appurtenant structures of dams addressed in the book chapters, as well as figures and diagrams showing important relations among the governing parameters of a certain phenomenon. An extensive literature review along with an updated bibliography complete this book.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1970 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Hydroinformatics written by Philippe Gourbesville and published by Springer. This book was released on 2015-08-21 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of extended papers based on presentations given during the SIMHYDRO 2014 conference, held in Sophia Antipolis in June 2014. It focuses on the modeling and simulation of fast hydraulic transients, on 3D modeling, and on uncertainties and multiphase flows. The book explores both the limitations and performance of current models and presents the latest developments based on new numerical schemes, high-performance computing, multiphysics and multiscale methods, and better interaction with field or scale model data. It addresses the interests of practitioners, stakeholders, researchers and engineers active in this field.

Download or read book Turbulent Jets written by N. Rajaratnam and published by Elsevier. This book was released on 1976-01-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent Jets