Download or read book A Compendium of the Properties of Materials at Low Temperatures written by United States. National Bureau of Standards. Cryogenic Engineering Laboratory, Boulder, Colo and published by . This book was released on 1961 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Compendium of the Properties of Materials at Low Temperature written by United States. National Bureau of Standards. Cryogenic Engineering Laboratory, Boulder, Colo and published by . This book was released on 1960 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Materials at Low Temperatures written by D. Wigley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: In writing this monograph, the aim has been to consider the mechanical properties of the wide range of materials now available in such a way as to start with the fundamental nature of these properties and to follow the discussion through to the point at which the reader is able to comprehend the significance or otherwise of the large amounts of data now available in design manuals and other compilations. In short, it is hoped that this volume will be used as a companion to these data compilations and as an aid to their interpretation. In attempting to cover such a wide field, a large degree of selection has been necessary, as complete volumes have been written on topics which here have had to be covered in a few pages or less. It is inevitable that not everyone will agree with the choice made, especially if it is his own subject which has been discussed rather briefly, and the author accepts full res ponsibility for the selection made. The book is written at a level which should be easily followed by a university graduate in science or engineer ing, although, if his background has not included a course in materials science, some groundwork may be lacking.
Download or read book Thermal Properties of Solids at Room and Cryogenic Temperatures written by Guglielmo Ventura and published by Springer. This book was released on 2014-06-23 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The minimum temperature in the natural universe is 2.7 K. Laboratory refrigerators can reach temperatures in the microkelvin range. Modern industrial refrigerators cool foods at 200 K, whereas space mission payloads must be capable of working at temperatures as low as 20 K. Superconducting magnets used for NMR work at 4.2 K. Hence the properties of materials must be accurately known also at cryogenic temperatures. This book provides a guide for engineers, physicists, chemists, technicians who wish to approach the field of low-temperature material properties. The focus is on the thermal properties and a large spectrum of experimental cases is reported. The book presents updated tables of low-temperature data on materials and a thorough bibliography supplements any further research. Key Features include: ° Detailed technical description of experiments ° Description of the newest cryogenic apparatus ° Offers data on cryogenic properties of the latest new materials ° Current reference review
Download or read book Properties of Materials at Low Temperature phase 1 written by Victor J. Johnson and published by . This book was released on 1961 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Matter and Methods at Low Temperatures written by Frank Pobell and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook contains information essential for successful experiments at low temperatures. The first chapters describe the low-temperature properties of liquids and solid matter, including liquid helium. Most of the book is devoted to refrigeration techniques and the physics on which they rely, the definition of temperature, thermometry, and a variety of design and construction techniques. The lively and practical style make it easy to read and particularly useful to anyone beginning research in low-temperature physics. Low-temperature scientists will find it of great value due to its extensive compilation of materials data and relevant new results.
Download or read book Materials at Low Temperatures written by Richard Palmer Reed and published by ASM International(OH). This book was released on 1983 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Materials written by G. Grimvall and published by Elsevier. This book was released on 1999-09-22 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a thoroughly revised version of the original book published in 1986. About half of the contents of the previous version remain essentially unchanged, and one quarter has been rewritten and updated. The rest consists of completely new and extended material. Recent research has focussed on new materials made through "molecular engineering", and computational materials science through ab initio electron structure calculations. Another trend is the ever growing interdisciplinary aspect of both basic and applied materials science. There is an obvious need for reviews that link well established results to the modern approaches. One purpose of this book is to provide such an overview in a specific field of materials science, namely thermophysical phenomena that are intimately connected with the lattice vibrations of solids. This includes, e.g., elastic properties and electrical and thermal transport. Furthermore, this book attempts to present the results in such a form that the reader can clearly see their domain of applicability, for instance if and how they depend on crystal structure, defects, applied pressure, crystal anisotropy etc. The level and presentation is such that the results can be immediately used in research. Graduate students in condensed matter physics, metallurgy, inorganic chemistry or geophysical materials will benefit from this book as will theoretical physicists and scientists in industrial research laboratories.
Download or read book Matter and Methods at Low Temperatures written by Frank Pobell and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide information about performing experi ments at low temperatures, as well as basic facts concerning the low tem perature properties of liquid and solid matter. To orient the reader, I begin with chapters on these low temperature properties. The major part of the book is then devoted to refrigeration techniques and to the physics on which they are based. Of equal importance, of course, are the definition and measurement of temperature; hence low temperature thermometry is extensively discussed in subsequent chapters. Finally, I describe a variety of design and construction techniques which have turned out to be useful over the years. The content of the book is based on the three-hour-per-week lecture course which I have given several times at the University of Bayreuth between 1983 and 1991. It should be particularly suited for advanced stu dents whose intended masters (diploma) or Ph.D. subject is experimental condensed matter physics at low temperatures. However, I believe that the book will also be of value to experienced scientists, since it describes sev eral very recent advances in experimental low temperature physics and technology, for example, new developments in nuclear refrigeration and thermometry.
Download or read book Polymer Properties at Room and Cryogenic Temperatures written by Gunther Hartwig and published by Springer Science & Business Media. This book was released on 1995-01-31 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most descriptions of polymers start at room temperature and end at the melting point. This textbook starts at very low temperatures and ends at room temperature. At low temperatures, may processes and relaxations are frozen which allows singular processes or separate relaxations to be studied. At room temperatures, or at the main glass transitions, many processes overlap and the properties are determined by relaxations. At low temperatures, there are temperature ranges with negligible influences by glass transitions. They can be used for investigating so-called basic properties which arise from principles of solid state physics. The chain structure of polymers, however, requires stringent modifications for establishing solid state physics of polymers. Several processes which are specific of polymers, occur only at low temperatures. There are also technological aspects for considering polymers at low temperatures. More and more applications of polymeric materials in low temperature technology appear. Some examples are thermal and electrical insulations, support elements for cryogenic devices, low-loss materials for high frequency equipments. It is hoped that, in addition to the scientific part, a data collection in the appendix may help to apply polymers more intensively in low temperature technology. The author greatly appreciates the contributions by his coworkers of the Kernforschungszentrum Karlsruhe in measurement and discussion of many data presented in the textbook and its appendix. Fruitful disccussions with the colleagues Prof. H. Baur, Prof. S. Hunklinger, Prof. D. Munz and Prof. R.
Download or read book Cryogenics and Measurement of Properties of Solids at Low Temperatures written by R. Srinivasan and published by Allied Publishers. This book was released on 2008-04-05 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low temperature research has become fairly widespread in the country after the availability of closed cycle refrigerators. It is opportune to write a book for students and researchers in India on production of low temperatures and techniques for the measurement of physical properties of materials at such temperatures. This book is an effort in this direction. The first part of the book discusses methods for producing temperatures down to 1.8 K. There is a fairly extensive discussion on different types of closed cycle refrigerators. The behaviour of properties of materials relevant in Cryogenics is dealt with in some detail. Useful tips on construction of cryostats are given. Thermometry is discussed extensively. The second part of the book deals with digital measuring techniques. Details of experimental methods for measuring thermal and electrical properties, point contact tunneling, scanning probe microscopy, and noise at low temperatures are discussed. This part of the book is born out of the rich personal experience in such measurements of one of the authors (AKR). There is an appendix on vacuum techniques. The book can be used for teaching an elective course in Low Temperature Physics at the M.Sc. level. It will be useful for researchers in Low Temperature Physics.
Download or read book Mechanical Properties of Materials at Low Temperatures written by D. A. Wigley and published by . This book was released on 1968 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Structural Materials at Low Temperatures written by Ralph Michael McClintock and published by . This book was released on 1960 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Materials and Mechanisms written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2016-08-19 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the growing interest in low temperature technologies. Since the subject of low temperature materials and mechanisms is multidisciplinary, the chapters reflect the broadest possible perspective of the field. Leading experts in the specific subject area address the various related science and engineering chemistry, material science, electrical engineering, mechanical engineering, metallurgy, and physics.
Download or read book Heat Capacity and Thermal Expansion at Low Temperatures written by T.H.K. Barron and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The birth of this monograph is partly due to the persistent efforts of the General Editor, Dr. Klaus Timmerhaus, to persuade the authors that they encapsulate their forty or fifty years of struggle with the thermal properties of materials into a book before they either expired or became totally senile. We recognize his wisdom in wanting a monograph which includes the closely linked properties of heat capacity and thermal expansion, to which we have added a little 'cement' in the form of elastic moduli. There seems to be a dearth of practitioners in these areas, particularly among physics postgraduate students, sometimes temporarily alleviated when a new generation of exciting materials are found, be they heavy fermion compounds, high temperature superconductors, or fullerenes. And yet the needs of the space industry, telecommunications, energy conservation, astronomy, medical imaging, etc. , place demands for more data and understanding of these properties for all classes of materials - metals, polymers, glasses, ceramics, and mixtures thereof. There have been many useful books, including Specific Heats at Low Tempera tures by E. S. Raja Gopal (1966) in this Plenum Cryogenic Monograph Series, but few if any that covered these related topics in one book in a fashion designed to help the cryogenic engineer and cryophysicist. We hope that the introductory chapter will widen the horizons of many without a solid state background but with a general interest in physics and materials.
Download or read book Austenitic Steels at Low Temperatures written by T. Horiuchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for alternate energy sources has led to the develop ment of prototype fusion and MHD reactors. Both possible energy systems in current designs usually require the use of magnetic fields for plasma confinement and concentration. For the creation and maintenance of large 5 to 15 tesla magnetic fields, supercon ducting magnets appear more economical. But the high magnetic fields create large forces, and the complexities of the conceptual reactors create severe space restrictions. The combination of re quirements, plus the desire to keep construction costs at a mini mum, has created a need for stronger structural alloys for service at liquid helium temperature (4 K). The complexity of the required structures requires that these alloys be weldable. Furthermore, since the plasma is influenced by magnetic fields and since magnet ic forces from the use of ferromagnetic materials in many configur ations may be additive, the best structural alloy for most applica tions should be nonmagnetic. These requirements have led to consideration of higher strength austenitic steels. Strength increases at low temperatures are achieved by the addition of nitrogen. The stability of the austenitic structure is retained by adding manganese instead of nickel, which is more expensive. Research to develop these higher strength austenitic steels is in process, primarily in Japan and the United States.
Download or read book The Specific Heat of Matter at Low Temperatures written by A Tari and published by World Scientific. This book was released on 2003-08-12 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent discoveries of new materials and improvements in calorimetric techniques have given new impetus to the subject of specific heat. Nevertheless, there is a serious lack of literature on the subject. This invaluable book, which goes some way towards remedying that, is concerned mainly with the specific heat of matter at ordinary temperatures. It discusses the principles that underlie the theory of specific heat and considers a number of theoretical models in some detail. The subject matter ranges from traditional materials to those recently discovered — heavy fermion compounds, high temperature superconductors, spin glasses and so on — and includes a large number of figures, tables and references. The book will be particularly useful for advanced undergraduate and postgraduate students as well as academics and researchers. Contents:Basic Concepts and DefinitionsLattice Specific HeatElectronic Specific HeatMagnetic Specific HeatSpecific Heat of Cryogenic LiquidsSpecific-Heat AnomaliesExperimental Techniques Readership: Upper level undergraduates, graduate students, researchers and academics.
