Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Effect of Relative Flexural torsional Beam Characteristics Upon Load Distribution in Multi beam Bridges written by Daryl Eugene Young and published by . This book was released on 1993 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 1994 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange

Download or read book Ei Engineering Conference Index written by and published by . This book was released on 1985 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1977 with total page 1406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Research Abstracts written by and published by . This book was released on 1992 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Highway Bridges written by Richard M. Barker and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of bridge design and analysis revised to reflect the fifth edition of the AASHTO LRFD specifications Design of Highway Bridges, Third Edition offers detailed coverage of engineering basics for the design of short- and medium-span bridges. Revised to conform with the latest fifth edition of the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications, it is an excellent engineering resource for both professionals and students. This updated edition has been reorganized throughout, spreading the material into twenty shorter, more focused chapters that make information even easier to find and navigate. It also features: Expanded coverage of computer modeling, calibration of service limit states, rigid method system analysis, and concrete shear Information on key bridge types, selection principles, and aesthetic issues Dozens of worked problems that allow techniques to be applied to real-world problems and design specifications A new color insert of bridge photographs, including examples of historical and aesthetic significance New coverage of the "green" aspects of recycled steel Selected references for further study From gaining a quick familiarity with the AASHTO LRFD specifications to seeking broader guidance on highway bridge design Design of Highway Bridges is the one-stop, ready reference that puts information at your fingertips, while also serving as an excellent study guide and reference for the U.S. Professional Engineering Examination.

Download or read book The Manual for Bridge Evaluation written by American Association of State Highway and Transportation Officials. Subcommittee on Bridges and Structures and published by AASHTO. This book was released on 2011 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Construction of Prestressed Concrete Structures written by Ben C. Gerwick, Jr. and published by John Wiley & Sons. This book was released on 1997-02-13 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die zweite Auflage dieses Klassikers - jetzt als Paperback - bietet Profis auf diesem Gebiet eine aktuelle und kompetente Präsentation der Technologie der Vorbelastung von Stahlbeton. Grundlegende Techniken, Materialien und Systeme werden behandelt und vielfältige Anwendungen - Gebäude, Brücken, Bohrplattformen, Straßen, Rollbahnen, Rohrleitungen - erläutert.

Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit

Download or read book Steel Bridges written by Manfred Hirt and published by CRC Press. This book was released on 2013-06-05 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This English translation of the successful French edition presents the conception and design of steel and steel-concrete composite bridges, from simple beam bridges to cable supported structures. The book focuses primarily on road bridges, emphasizing the basis of their conception and the fundamentals that must be considered to assure structural safety and serviceability, as well as highlighting the necessary design checks. The principles are extended in later chapters to railway bridges as well as bridges for pedestrians and cyclists. Particular attention is paid to consideration of the dynamic performance.

Download or read book Guide Specifications for Design of Pedestrian Bridges written by and published by American Association of State Highway & Transportation Officials. This book was released on 1997 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Bridge Superstructure Engineering written by Narendra Taly and published by CRC Press. This book was released on 2014-11-21 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: A How-To Guide for Bridge Engineers and Designers Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to highway bridges of all construction and material types, and is based on the load and resistance factor design (LRFD) philosophy. It discusses the theory of probability (with an explanation leading to the calibration process and reliability), and includes fully solved design examples of steel, reinforced and prestressed concrete bridge superstructures. It also contains step-by-step calculations for determining the distribution factors for several different types of bridge superstructures (which form the basis of load and resistance design specifications) and can be found in the AASHTO LRFD Bridge Design Specifications. Fully Realize the Basis and Significance of LRFD Specifications Divided into six chapters, this instructive text: Introduces bridge engineering as a discipline of structural design Describes numerous types of highway bridge superstructures systems Presents a detailed discussion of various types of loads that act on bridge superstructures and substructures Discusses the methods of analyses of highway bridge superstructures Includes a detailed discussion of reinforced and prestressed concrete bridges, and slab-steel girder bridges Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis can be used for teaching highway bridge design courses to undergraduate- and graduate-level classes, and as an excellent resource for practicing engineers.

Download or read book U S Scientists and Engineers 1974 written by National Science Foundation (U.S.) and published by . This book was released on 1977 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."

Download or read book Handbook of International Bridge Engineering written by Wai-Fah Chen and published by CRC Press. This book was released on 2013-10-11 with total page 1383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and up-to-date reference work and resource book covers state-of-the-art and state-of-the-practice for bridge engineering worldwide. Countries covered include Canada and the United States in North America; Argentina and Brazil in South America; Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Greece, Macedonia,

Download or read book Bridge Engineering written by Demetrios E. Tonias and published by McGraw Hill Professional. This book was released on 2007 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at US audience - architects (113,000), civil engineers (228,000), and universities and colleges offering structural engineering programs. This work reflects the bridge design code changes and the newest ASCE [American Association of Civil Engineers] design methods. It uses SI units throughout for international usage.