Download or read book A Comparison of Synthetic Adsorbents and Activated Carbon in the Removal of Methyl tertiary butyl Ether from Gasoline Contaminated Groundwater written by Locandro, Jr. (Ronald R.) and published by . This book was released on 1993 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Research on Environmental Earth Sciences Geomorphology Soil Science and Paleoenvironments written by Attila Çiner and published by Springer Nature. This book was released on with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Alternative Adsorbents for the Removal of Polar Organic Contaminants written by Detlef R. U. Knappe and published by American Water Works Association. This book was released on 2007 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project studies the application of high-silica zeolites for the removal of polar organic contaminants, i.e., antimicrobial compounds and the fuel additive methyl tertiary-butyl ether (MTBE), from drinking water. Recently published data show that high-silica zeolites, a class of crystalline adsorbents with well defined pore sizes, exhibit considerably larger single-solute MTBE adsorption capacities than activated carbons and carbonaceous resins. The effectiveness of high-silica zeolites is compared to that of activated carbons and a carbonaceous resin.

Download or read book Effects of Activated Carbon Characteristics on Organic Contaminant Removal written by Detlef R. U. Knappe and published by IWA Publishing. This book was released on 2004-01-01 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many water treatment plants need to remove objectionable trace organic compounds, and activated carbon adsorption is often the best available technology. Utilities face the challenge of having to choose from a large variety of activated carbons, and iodine number or BET surface area values are often utilized in the selection process. Although neither parameter correlates well with adsorption capacities, alternative activated carbon selection criteria based on fundamental adsorbent and adsorbate properties are lacking to date. The first objective of this research was to systematically evaluate the effects of activated carbon pore structure and surface chemistry on the adsorption of two common drinking water contaminants: the relatively polar fuel oxygenate methyl tertiary-butyl ether (MTBE) and the relatively nonpolar solvent trichloroethene (TCE). The second objective was to develop simple descriptors of activated carbon characteristics that facilitate the selection of suitable adsorbents for the removal of organic contaminants from drinking water.Originally published by AwwaRF for its subscribers in 2003 This publication can also be purchased and downloaded via Pay Per View on Water Intelligence Online - click on the Pay Per View icon below

Download or read book Master s Theses Directories written by and published by . This book was released on 1993 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Education, arts and social sciences, natural and technical sciences in the United States and Canada".

Download or read book Effects of Activated Carbon Surface Chemistry and Pore Structure on the Absorption of Methyl Tertiary Butyl Ether and Trichloroethene from Natural Water written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated carbon adsorption is the best available treatment technology for thecontrol of many objectionable trace organic compounds. Activated carbons are frequentlycharacterized by the iodine number and BET surface area, but these parameters do notcorrelate well with trace organic compound removal from natural water. Therefore, theobjective of this research was to develop activated carbon selection criteria that assure theeffective removal of trace organic contaminants from natural water and to base theselection criteria on the adsorbent's pore structure and surface chemistry. Tosystematically evaluate pore structure and surface chemistry effects, a matrix of activatedcarbon fibers (ACFs) with three activation levels and four surface chemistry levels wasstudied. To evaluate whether adsorption trends established for ACFs were also valid forgranular activated carbon (GAC), ACF results were compared with those obtained forthree commercially available GACs. Adsorption capacities were determined for naturalorganic matter (NOM), for relatively hydrophilic methyl tertiary-butyl ether (MTBE) andrelatively hydrophobic trichloroethene (TCE) in organic-free water, and for MTBE andTCE in the presence of NOM. NOM isotherms showed that DOC adsorption occurredprimarily in pores with diameters in the 11 to 500 Å range and that electrostaticinteractions between NOM and the carbon surface played a role in NOM adsorption. According to both single-solute isotherms and micropollutant isotherms in the presence of NOM, hydrophobic adsorbents more effectively removed TCE and MTBE thanhydrophilic adsorbents. Effective adsorbents for drinking water treatment shouldtherefore contain little oxygen and nitrogen whose presence increases the polarity of theadsorbent surface. Based on the elemental composition of the low-ash carbons evaluatedin this study, activated carbons should have oxygen and nitrogen contents that sum to nomore than 2 to 3 mmol/g to assure sufficient hydrophobicity. In a.

Download or read book Carbonaceous Adsorbents for the Treatment of Ground and Surface Waters written by James W. Neely and published by . This book was released on 1982 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Activated Carbon Surface Chemistry and Pore Structure on the Adsorption of Trace Organic Contaminants from Aqueous Solution written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal objectives of this research were (1) to identify activated pore structure and surface chemistry characteristics that assure the effective removal of trace organic contaminants from aqueous solution, and (2) to develop a procedure to predict the adsorption capacity of activated carbons from fundamental adsorbent and adsorbate properties. To systematically evaluate pore structure and surface chemistry effects on the adsorption of organic micropollutants from aqueous solution, a matrix of activated carbon fibers (ACFs) with three activation levels and four surface chemistry levels was prepared and characterized. In addition, three commercially available granular activated carbons (GACs) were studied to verify whether correlations developed for the ACF matrix are valid for adsorbents that are typically used for water treatment. BET surface area, pore size distribution, elemental composition, point of zero charge and infrared spectroscopy data were obtained to characterize the adsorbents. The results showed that the ACF matrix prepared in this study permits a fairly independent evaluation of surface chemistry and pore structure effects on organic contaminant adsorption from aqueous solution. Methyl tertiary-butyl ether (MTBE), a relatively hydrophilic adsorbate, and trichloroethene (TCE), a relatively hydrophobic adsorbate, served as adsorbate probes. To evaluate the effects of natural organic matter (NOM) on MTBE and TCE adsorption capacities, isotherm experiments were conducted in ultrapure water and Sacramento-San Joaquin Delta water. With respect to surface chemistry, both single-solute isotherms and isotherms in the presence of NOM indicated that hydrophobic adsorbents more effectively removed TCE and MTBE from aqueous solution than hydrophilic adsorbents. Enhanced water adsorption on polar surface sites explained the poorer performance of the hydrophilic adsorbents. Based on the elemental composition of the low-ash carbons evaluated in this study, act.

Download or read book Use of Adsorbents for the Removal of Pollutants from Wastewater written by Gordon McKay and published by CRC Press. This book was released on 1995-10-25 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of Adsorbents for the Removal of Pollutants from Wastewater describes the most commonly occurring industrial effluents, and presents direct means and methodologies for treating them. In addition to its excellent introduction to pollutants, this book contains all of the basics you need for understanding the characteristics and applications of adsorbent materials. With this book, you can choose from a wide variety of traditional and novel adsorbents, including alternative, relatively inexpensive adsorbents.

Download or read book Green Adsorbents for Pollutant Removal written by Grégorio Crini and published by Springer. This book was released on 2018-07-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume on adsorption using green adsorbents and is written by international contributors who are the leading experts in the adsorption field. Together with the first volume they show a typical selection of green materials used in wastewater treatment, with emphasis on industrial effluents. This second volume focuses on innovative materials. It presents hemp-based materials for metal removal, and the use of leaves for metal removal. It describes the biosorption of metals and metalloids on various materials and discusses the recent advances in cellulose-based adsorbents used in environmental purposes. Furthermore, activated carbons from food wastes, aerogels and bones, and municipal solid waste biochar as efficient materials for pollutant removal, respectively are reviewed as well as biosorption of dyes onto microbial biosorbents and the use of mushroom biomass to remove pollutants are looked at. The volume also includes detailed review of green adsorbents for removal of antibiotics, pesticides and endocrine disruptors and the use of pillared interlayered clays as innovative materials for pollutant removal. Finally, the use of green adsorbents for radioactive pollutant removal from natural water is discussed. The audience for this book includes students, environmentalists, engineers, water scientists, civil and industrial personnel who wish to specialize in adsorption technology. Academically, this book will be of use to students in chemical and environmental engineering who wish to learn about adsorption and its fundamentals. It has also been compiled for practicing engineers who wish to know about recent developments on adsorbent materials in order to promote further research toward improving and developing newer adsorbents and processes for the efficient removal of pollutants from industrial effluents. It is hoped that the book will serve as a readable and useful presentation not only for undergraduate and postgraduate students but also for the water scientists and engineers and as a convenient reference handbook in the form of numerous recent examples and appended information.

Download or read book Green Adsorbents to Remove Metals Dyes and Boron from Polluted Water written by Inamuddin and published by Springer Nature. This book was released on 2020-08-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews adsorption techniques to clean wastewater, with focus on pollution by dyes and heavy metals. Advanced adsorbents include carbon nanomaterials, biomass, cellulose, polymers, clay, composites and chelating materials.

Download or read book Sorption Processes and Pollution written by Grégorio Crini and published by Presses Univ. Franche-Comté. This book was released on 2010 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Filtration for Reducing Emissions from Chemical Agent Incineration written by National Research Council and published by National Academies Press. This book was released on 1999-08-12 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reviews the Army's evaluation of carbon filters for use in the baseline incineration PAS, as well as the Army's change management process (the Army's tool for evaluating major equipment and operational changes to disposal facilities). In preparing this report, members of the Stockpile Committee evaluated exhaust gas emissions testing at the two operating baseline incineration systems, JACADS and the TOCDF; evaluated the development of the dilute SOPC carbon filter simulation model; and evaluated the conceptual design of a modified PAS with an activated carbon filter. The two major risk assessments conducted for each continental disposal site that use the baseline system, namely, (1) the quantitative risk assessment, which evaluates the risks and consequences of accidental agent releases, and (2) the health risk assessment, which evaluates the potential effects of nonagent emissions on human health and the environment, were also examined.

Download or read book Treatment of Refinery Wastewater Using a Filtration activated Carbon System written by Bruce A. McCrodden and published by . This book was released on 1979 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adsorption of Multiple Herbicides and Metabolites on Activated Carbon Fiber written by Sungho Kang and published by . This book was released on 2009 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption of the herbicides atrazine, diuron, and simazine and metabolites DIA (de-isopropyl-atrazine) and DEDIA (de-ethyl-de-isopropyl-atrazine) were studied on an activated carbon fiber (ACF) using a batch test method. The specific surface area (1,217m2/g) and mean micropore width (1.24 nm) of ACF were determined by measuring the N2 adsorption at 77K ( -196°C). Boehm's titration method and pH drift method were used to determine amount of surface functional group (total acidity: 238 meq/g and total basicity: 498 meq/g) and pHP̳Z̳C̳ (7.49), respectively. Single component adsorption and competitive binary adsorption isotherm experiments were conducted for low initial concentrations (20 ppb to 500 ppb). The Freundlich isotherm models described the single component adsorption process well (r2> 0.96 in all cases); however, there was a discrepancy between expected and observed adsorption capacities because of some uncertainty in Ko̳w̳ values of the solutes and differences in the geometry of the molecules. The Ideal Adsorbed Solution Theory (IAST) was used to describe competitive binary adsorption. The IAST was well adapted to describing competition involving the weakly adsorbed compounds (DIA and DEDIA), but the IAST proved less appropriate for describing competition among highly adsorbed compounds (atrazine, diuron, and simazine).

Download or read book Standard Methods for the Examination of Water and Wastewater written by American Public Health Association and published by . This book was released on 1981 with total page 1254 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.