Download or read book A Comparative Study on Some Fault Diagnosis Techniques in Three Phase Inverter Fed Induction Motors written by Bilal Djamal Eddine and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing importance of power conversion systems and their dependency on the performance and reliability of static converters has motivated extensive research efforts in this field. A variety of different techniques have been applied to detect open-circuit faults in power converters. The present chapter is focusing on the techniques of detection and localization of open-circuit faults in a three phase voltage source inverter fed induction motor. A comparative study is carried out between different detection techniques: the Park current vectors and its enhancement by using the polar coordinates, the mean value of the currents, the stator current spectrum analysis and the measurement of the current drop. The aim of this comparison is to investigate the relative strengths and weaknesses of the different techniques and evaluate the performance of each detection technique studied. The comparison study focuses on the time detection, the localization ability and the hardware aspect. To validate these techniques, an experimental setup is developed in our diagnostic group laboratory which consists of a two-level voltage source inverter controlled by a DSPACE-1104, Card to generate the PWM vector control of the induction motor. The obtained simulation and experimental results illustrate well the detection feasibility of each technique as well as the benefits and merits of the performed comparative study.

Download or read book Fault Detection and Diagnosis written by Constantin Volosencu and published by BoD – Books on Demand. This book was released on 2018-11-07 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a selection of papers in the field of fault detection and diagnosis, promoting new research results in the field, which come to join other publications in the literature. Authors from countries of four continents: United States of America, South Africa, China, India, Algeria and Croatia published worked examples and case studies resulting from their research in the field. Fault detection and diagnosis has a great importance in all industrial processes, to assure the monitoring, maintenance and repair of the complex processes, including all hardware, firmware and software. The book has four sections, determined by the application domain and the methods used: 1. Hybrid Computing Systems, 2. Power Systems, 3. Power Electronics and 4. Kalman Filtering. In the first section, the readers will find a technical report on fault diagnosis of hybrid computing systems, based on the chaotic-map method that uses the exponential divergence and wide Fourier properties of the trajectories, combined with memory allocations and assignments. In the second section, two chapters are included: one of them presents a study on preventive maintenance and fault detection for wind turbine generators using statistical models and the second chapter presents a technical report on fault diagnosis for turbo-generators, based on the mechanical-electrical intersectional characteristics. The third section contains a technical report that presents some techniques of detection and localization of open-circuit faults in a three-phase voltage source inverter fed induction motor. The fourth section presents a theoretical study on the application of distributed discrete-time linear Kalman filtering with decentralized structure of sensors in fault residual generation.

Download or read book Fault Detection and Diagnosis written by Constantin Volosencu and published by . This book was released on 2018 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a selection of papers in the field of fault detection and diagnosis, promoting new research results in the field, which come to join other publications in the literature. Authors from countries of four continents: United States of America, South Africa, China, India, Algeria and Croatia published worked examples and case studies resulting from their research in the field. Fault detection and diagnosis has a great importance in all industrial processes, to assure the monitoring, maintenance and repair of the complex processes, including all hardware, firmware and software. The book has four sections, determined by the application domain and the methods used: 1. Hybrid Computing Systems, 2. Power Systems, 3. Power Electronics and 4. Kalman Filtering. In the first section, the readers will find a technical report on fault diagnosis of hybrid computing systems, based on the chaotic-map method that uses the exponential divergence and wide Fourier properties of the trajectories, combined with memory allocations and assignments. In the second section, two chapters are included: one of them presents a study on preventive maintenance and fault detection for wind turbine generators using statistical models and the second chapter presents a technical report on fault diagnosis for turbo-generators, based on the mechanical-electrical intersectional characteristics. The third section contains a technical report that presents some techniques of detection and localization of open-circuit faults in a three-phase voltage source inverter fed induction motor. The fourth section presents a theoretical study on the application of distributed discrete-time linear Kalman filtering with decentralized structure of sensors in fault residual generation.

Download or read book Diagnosis and Fault Tolerant Control written by Mogens Blanke and published by Springer Science & Business Media. This book was released on 2006-09-24 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, test fault detectability and reveal redundancies that can be used to ensure fault tolerance. Case studies demonstrate the methods presented. The second edition includes new material on reconfigurable control, diagnosis of nonlinear systems, and remote diagnosis, plus new examples and updated bibliography.

Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Control Applications Volume 1 written by Salim Ziani and published by Springer Nature. This book was released on with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Diagnosis for Robust Inverter Power Drives written by Antonio Ginart and published by Institution of Engineering and Technology. This book was released on 2018-11-15 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power drives are used for induction motor control, uninterruptible power supplies, and in electrical vehicles. The increasing penetration of power drives makes their reliability, robustness, and early diagnosis a central point of attention especially in planning, designing, and financing. This book explores fault diagnosis of inverter drives to enable early diagnosis and robust design for efficient long life operation.

Download or read book Advanced Condition Monitoring and Fault Diagnosis of Electric Machines written by Irfan, Muhammad and published by IGI Global. This book was released on 2018-09-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability of induction motors is a major requirement in many industrial applications. It is especially important where an unexpected breakdown might result in the interruption of critical services such as military operations, transportation, aviation, and medical applications. Advanced Condition Monitoring and Fault Diagnosis of Electric Machines is a collection of innovative research on various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, and new trends in condition monitoring. It also pays special attention to the fault identification process. While highlighting topics including spectral analysis, electrical engineering, and bearing faults, this book is an ideal reference source for electrical engineers, mechanical engineers, researchers, and graduate-level students seeking current research on various methods of maintaining machinery.

Download or read book Condition Monitoring and Faults Diagnosis of Induction Motors written by Nordin Saad and published by CRC Press. This book was released on 2018-07-11 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, faults for induction motors failures, new trends in condition monitoring, and the fault identification process using motor currents electrical signature analysis. It aims to present a new non-invasive and non-intrusive condition monitoring system, which has the capability to detect various defects in induction motor at incipient stages within an arbitrary noise conditions. The performance of the developed system has been analyzed theoretically and experimentally under various loading conditions of the motor. Covers current and new approaches applied to fault diagnosis and condition monitoring. Integrates concepts and practical implementation of electrical signature analysis. Utilizes LabVIEW tool for condition monitoring problems. Incorporates real-world case studies. Paves way a technology potentially for prescriptive maintenance via IIoT.

Download or read book ICCCE 2020 written by Amit Kumar and published by Springer Nature. This book was released on 2020-10-11 with total page 1561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of research papers and articles presented at the 3rd International Conference on Communications and Cyber-Physical Engineering (ICCCE 2020), held on 1-2 February 2020 at CMR Engineering College, Hyderabad, Telangana, India. Discussing the latest developments in voice and data communication engineering, cyber-physical systems, network science, communication software, image and multimedia processing research and applications, as well as communication technologies and other related technologies, it includes contributions from both academia and industry. This book is a valuable resource for scientists, research scholars and PG students working to formulate their research ideas and find the future directions in these areas. Further, it may serve as a reference work to understand the latest engineering and technologies used by practicing engineers in the field of communication engineering.

Download or read book Fault Detection in Three Phase Induction Motor Using Artificial Intelligence written by Unida Izwani Md Dun and published by . This book was released on 2010 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial intelligence (AI) techniques have proved their ability in detection of incipient faults in electrical machines. In this project, the fault diagnosis of three phase induction motors is studied detailed in unbalance voltage and stator inter turn fault using simulation models and neural networks have been used to train the data using Radial Basis Function Neural Network (RBFNN) in MATLAB with Graphical User Interface Development Environment (GUIDE) structured. Nowadays artificial intelligence is implemented to improve traditional techniques. The results can be obtained instantaneously after it analyzes the input data of the motor. The increased in demand has greatly improved the approach of fault detection in polyphase induction motor. Data is taken from the experiment checking the induction motor fault and is simulated into MATLAB using RBFNN. The first stage is to collect the data by experimental and simulating a Simulink model using MATLAB. Three Simulink model will be created where each of the model represent the motor condition. The result of the simulation will then be the data used to create an ANN.The second stage creates and trains an ANN. From the data obtained during the first section, a target output will determine the motor condition whether the motor is in a healthy state or fault occurred. In the third stage the development Graphical User Interface (GUI) is carried out this system. The GUI is developed by using MATLAB for the purpose of evaluating and testing the ANN. The purpose of this final year project, the development of Fault Detection in Three-Phase Induction Motor Using Artificial Intelligence is to satisfy the increased in demand to improve the approach of fault detection in polyphase induction motor. Artificial intelligence is implemented to improve traditional techniques, as the results can be obtained instantaneously after it analyzes the input data of the motor where it can be accomplished without an expert.

Download or read book Fault Diagnosis Prognosis and Reliability for Electrical Machines and Drives written by Elias G. Strangas and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives An insightful treatment of present and emerging technologies in fault diagnosis and failure prognosis In Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives, a team of distinguished researchers delivers a comprehensive exploration of current and emerging approaches to fault diagnosis and failure prognosis of electrical machines and drives. The authors begin with foundational background, describing the physics of failure, the motor and drive designs and components that affect failure and signals, signal processing, and analysis. The book then moves on to describe the features of these signals and the methods commonly used to extract these features to diagnose the health of a motor or drive, as well as the methods used to identify the state of health and differentiate between possible faults or their severity. Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives discusses the tools used to recognize trends towards failure and the estimation of remaining useful life. It addresses the relationships between fault diagnosis, failure prognosis, and fault mitigation. The book also provides: A thorough introduction to the modes of failure, how early failure precursors manifest themselves in signals, and how features extracted from these signals are processed A comprehensive exploration of the fault diagnosis, the results of characterization, and how they used to predict the time of failure and the confidence interval associated with it A focus on medium-sized drives, including induction, permanent magnet AC, reluctance, and new machine and drive types Perfect for researchers and students who wish to study or practice in the rea of electrical machines and drives, Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives is also an indispensable resource for researchers with a background in signal processing or statistics.

Download or read book Control of Multiphase Machines and Drives written by Federico Barrero and published by MDPI. This book was released on 2020-01-24 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growing interest in electrical machines in recent times, the multiphase machine field has developed into a fascinating research area. Their intrinsic features (power splitting, better fault tolerance, or lower torque ripple) make them an appealing competitor to conventional three-phase machines. Multiphase electric drives have been recently used in applications where fault tolerance and continuous operation of the drive are required. However, the difficulties in extending the three-phase conventional current regulation and control structure to multiphase systems still limit their broad applicability in industry solutions. The main objective of this book is to illustrate new advances, developments, and applications in the field of multiphase machines and drives, while exposing these advances, developments, and applications to the scientific community and industry.

Download or read book Artificial Intelligence based Electrical Machines and Drives written by Peter Vas and published by Oxford University Press. This book was released on 1999-01-28 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roughly half of all electricity generated is consumed in motors, and recent efforts to apply artificial intelligence (AI) to improving electric motors are receiving attention worldwide. At present two industrial drives incorporate some form of AI. This book is the first comprehensive discussion of AI applications to electrical machines and drives. It looks at d.c. drives, induction motor drives, synchronous motor drives, switched reluctance motor drives, and sensorless drives. It combines simple explanations of AI-based systems with detailed and unified mathematical and physical treatments, and it includes numerous worked examples, simulations, and experimental results.

Download or read book Fault Diagnosis for Electric Power Systems and Electric Vehicles written by G. Rigatos and published by CRC Press. This book was released on 2024-10-30 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present monograph offers a detailed and in-depth analysis of the topic of fault diagnosis for electric power systems and electric vehicles. First, the monograph treats the problem of Fault diagnosis with model-based and model-free techniques (Model-based fault diagnosis techniques and Model-free fault diagnosis techniques). Next, the monograph provides a solution for the problem of Control and fault diagnosis for Synchronous Generator-based renewable energy systems (Control of the marine-turbine and synchronous-generator unit and Fault diagnosis of the marine turbine and synchronous-generator unit. Additionally, the monograph introduces novel solutions for the problem of Fault diagnosis for electricity microgrids and gas processing units (Fault diagnosis for electric power DC microgrids and Fault diagnosis for electrically actuated gas compressors). Furthermore, the monograph analyzes and solves the problem of Fault diagnosis for gas and steam-turbine power generation units (Fault diagnosis for the gas-turbine and Synchronous Generator electric power unit and for the steam-turbine and synchronous generator power unit). Finally, the monograph provides a solution for the problem of Fault diagnosis for wind power units and for the distribution grid (Fault diagnosis for wind power generators and Fault diagnosis for the electric power distribution grid). The new fault detection and isolation methods that the monograph develops are of generic use and are addressed to a wide class of nonlinear dynamical systems, with emphasis on electric power systems and electric vehicles. On the one side, model-based fault detection and isolation methods are analyzed. In this case, known models about the dynamics of the monitored system are used by nonlinear state observers and Kalman Filters, which emulate the system’s fault-free condition. On the other side, model-free fault detection and isolation methods are analyzed. In this case, raw data are processed by neural networks and nonlinear regressors to generate models that emulate the fault-free condition of the monitored system. Statistical tests based on the processing of the residuals, which are formed between the outputs of the monitored system and the outputs of the fault-free model provide objective and almost infallible criteria about the occurrence of failures. The new fault detection and isolation methods with statistical procedures for defining fault thresholds enable early fault diagnosis and reveal incipient changes in the parameters of the monitored systems.

Download or read book ICCCE 2021 written by Amit Kumar and published by Springer Nature. This book was released on 2022-05-15 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of research articles presented at the 4th International Conference on Communications and Cyber-Physical Engineering (ICCCE 2021), held on April 9 and 10, 2021, at CMR Engineering College, Hyderabad, India. ICCCE is one of the most prestigious conferences conceptualized in the field of networking and communication technology offering in-depth information on the latest developments in voice, data, image, and multimedia. Discussing the latest developments in voice and data communication engineering, cyber-physical systems, network science, communication software, image, and multimedia processing research and applications, as well as communication technologies and other related technologies, it includes contributions from both academia and industry. This book is a valuable resource for scientists, research scholars, and PG students working to formulate their research ideas and find the future directions in these areas. Further, it may serve as a reference work to understand the latest engineering and technologies used by practicing engineers in the field of communication engineering.

Download or read book Proceedings of the International Conference on Signal Networks Computing and Systems written by Daya K. Lobiyal and published by Springer. This book was released on 2016-10-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of high-quality peer-reviewed research papers presented in the first International Conference on Signal, Networks, Computing, and Systems (ICSNCS 2016) held at Jawaharlal Nehru University, New Delhi, India during February 25–27, 2016. The book is organized in to two volumes and primarily focuses on theory and applications in the broad areas of communication technology, computer science and information security. The book aims to bring together the latest scientific research works of academic scientists, professors, research scholars and students in the areas of signal, networks, computing and systems detailing the practical challenges encountered and the solutions adopted.

Download or read book Proceeding of International Conference on Intelligent Communication Control and Devices written by Rajesh Singh and published by Springer. This book was released on 2016-09-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents high-quality research papers presented at the first international conference, ICICCD 2016, organised by the Department of Electronics, Instrumentation and Control Engineering of University of Petroleum and Energy Studies, Dehradun on 2nd and 3rd April, 2016. The book is broadly divided into three sections: Intelligent Communication, Intelligent Control and Intelligent Devices. The areas covered under these sections are wireless communication and radio technologies, optical communication, communication hardware evolution, machine-to-machine communication networks, routing techniques, network analytics, network applications and services, satellite and space communications, technologies for e-communication, wireless Ad-Hoc and sensor networks, communications and information security, signal processing for communications, communication software, microwave informatics, robotics and automation, optimization techniques and algorithms, intelligent transport, mechatronics system, guidance and navigation, algorithms, linear/non-linear control, home automation, sensors, smart cities, control systems, high performance computing, cognition control, adaptive control, distributed control, prediction models, hybrid control system, control applications, power system, manufacturing, agriculture cyber physical system, network control system, genetic control based, wearable devices, nano devices, MEMS, bio-inspired computing, embedded and real-time software, VLSI and embedded systems, FPGA, digital system and logic design, image and video processing, machine vision, medical imaging, and reconfigurable computing systems.