Download or read book A Collection of Nonlinear Aircraft Simulations in MATLAB written by and published by . This book was released on 2003 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Collection of Nonlinear Aircraft Simulations in MATLAB written by National Aeronautics and Space Administration (NASA) and published by . This book was released on 2018-08-29 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear six degree-of-freedom simulations for a variety of aircraft were created using MATLAB. Data for aircraft geometry, aerodynamic characteristics, mass / inertia properties, and engine characteristics were obtained from open literature publications documenting wind tunnel experiments and flight tests. Each nonlinear simulation was implemented within a common framework in MATLAB, and includes an interface with another commercially-available program to read pilot inputs and produce a three-dimensional (3-D) display of the simulated airplane motion. Aircraft simulations include the General Dynamics F-16 Fighting Falcon, Convair F-106B Delta Dart, Grumman F-14 Tomcat, McDonnell Douglas F-4 Phantom, NASA Langley Free-Flying Aircraft for Sub-scale Experimental Research (FASER), NASA HL-20 Lifting Body, NASA / DARPA X-31 Enhanced Fighter Maneuverability Demonstrator, and the Vought A-7 Corsair II. All nonlinear simulations and 3-D displays run in real time in response to pilot inputs, using contemporary desktop personal computer hardware. The simulations can also be run in batch mode. Each nonlinear simulation includes the full nonlinear dynamics of the bare airframe, with a scaled direct connection from pilot inputs to control surface deflections to provide adequate pilot control. Since all the nonlinear simulations are implemented entirely in MATLAB, user-defined control laws can be added in a straightforward fashion, and the simulations are portable across various computing platforms. Routines for trim, linearization, and numerical integration are included. The general nonlinear simulation framework and the specifics for each particular aircraft are documented.Garza, Frederico R. and Morelli, Eugene A.Langley Research CenterFLIGHT SIMULATION; NONLINEARITY; DEGREES OF FREEDOM; COMPUTER PROGRAMS; F-106 AIRCRAFT; F-14 AIRCRAFT; F-16 AIRCRAFT; F-4 AIRCRAFT; X-31 AIRCRAFT; REAL TIME OPERATION; NUMERICAL INTEGRATION...

Download or read book Nonlinear Control of Robots and Unmanned Aerial Vehicles written by Ranjan Vepa and published by CRC Press. This book was released on 2016-10-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control of Robots and Unmanned Aerial Vehicles: An Integrated Approach presents control and regulation methods that rely upon feedback linearization techniques. Both robot manipulators and UAVs employ operating regimes with large magnitudes of state and control variables, making such an approach vital for their control systems design. Numerous application examples are included to facilitate the art of nonlinear control system design, for both robotic systems and UAVs, in a single unified framework. MATLAB® and Simulink® are integrated to demonstrate the importance of computational methods and systems simulation in this process.

Download or read book Theory Methodology Tools and Applications for Modeling and Simulation of Complex Systems written by Lin Zhang and published by Springer. This book was released on 2016-09-21 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume set (CCIS 643, 644, 645, 646) constitutes the refereed proceedings of the 16th Asia Simulation Conference and the First Autumn Simulation Multi-Conference, AsiaSim / SCS AutumnSim 2016, held in Beijing, China, in October 2016. The 265 revised full papers presented were carefully reviewed and selected from 651 submissions. The papers in this second volume of the set are organized in topical sections on HMI and robot simulations; modeling and simulation for intelligent manufacturing; military simulation; visualization and virtual reality.

Download or read book Aircraft Control and Simulation written by Brian L. Stevens and published by John Wiley & Sons. This book was released on 2015-10-02 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get a complete understanding of aircraft control and simulation Aircraft Control and Simulation: Dynamics, Controls Design, and Autonomous Systems, Third Edition is a comprehensive guide to aircraft control and simulation. This updated text covers flight control systems, flight dynamics, aircraft modeling, and flight simulation from both classical design and modern perspectives, as well as two new chapters on the modeling, simulation, and adaptive control of unmanned aerial vehicles. With detailed examples, including relevant MATLAB calculations and FORTRAN codes, this approachable yet detailed reference also provides access to supplementary materials, including chapter problems and an instructor's solution manual. Aircraft control, as a subject area, combines an understanding of aerodynamics with knowledge of the physical systems of an aircraft. The ability to analyze the performance of an aircraft both in the real world and in computer-simulated flight is essential to maintaining proper control and function of the aircraft. Keeping up with the skills necessary to perform this analysis is critical for you to thrive in the aircraft control field. Explore a steadily progressing list of topics, including equations of motion and aerodynamics, classical controls, and more advanced control methods Consider detailed control design examples using computer numerical tools and simulation examples Understand control design methods as they are applied to aircraft nonlinear math models Access updated content about unmanned aircraft (UAVs) Aircraft Control and Simulation: Dynamics, Controls Design, and Autonomous Systems, Third Edition is an essential reference for engineers and designers involved in the development of aircraft and aerospace systems and computer-based flight simulations, as well as upper-level undergraduate and graduate students studying mechanical and aerospace engineering.

Download or read book New Achievements in Unmanned Systems written by T. Hikmet Karakoc and published by Springer Nature. This book was released on 2023-06-27 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned systems are one of the fastest-growing and widely developing technologies in the world, offering many possibilities for a variety of research fields. This book comprises the proceedings of the 2021 International Symposium on Unmanned Systems and the Defense Industry (ISUDEF), a multi-disciplinary conference on a broad range of current research and issues in areas such as autonomous technology, unmanned aircraft technologies, avionics, radar systems, air defense, aerospace robotics and mechatronics, and aircraft technology design. ISUDEF allows researchers, scientists, engineers, practitioners, policymakers, and students to exchange information, present new technologies and developments, and discuss future direction, strategies, and priorities in the field of autonomous vehicles and unmanned aircraft technologies. Covers a range of emerging topics; Addresses current issues on autonomous vehicles and unmanned aircraft; Full proceedings of ISUDEF 2021 held at Howard University.

Download or read book Aircraft System Identification written by Eugene Morelli and published by Sunflyte Enterprises. This book was released on 2016 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of both the theoretical underpinnings and the practical application of aircraft modeling based on experimental data also known as aircraft system identification. Much of the material presented comes from the authors own extensive research and teaching activities at the NASA Langley Research Center, and is based on real-world applications of system identification to aircraft. The book uses actual flight-test and wind-tunnel data for case studies and examples, and is a valuable resource for researchers and practicing engineers, as well as a textbook for postgraduate and senior-level courses. [...] The methods and algorithms explained in the book are implemented in a NASA software toolbox called SIDPAC (System IDentification Programs for AirCraft). SIDPAC is written in MATLAB®, and is available by request from NASA Langley Research Center. SIDPAC is composed of many different tools that implement a wide variety of approaches explained fully in the book. These tools can be readily applied to solve aircraft system identification problems.

Download or read book Modeling and Simulation of Systems Using MATLAB and Simulink written by Devendra K. Chaturvedi and published by CRC Press. This book was released on 2017-12-19 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only do modeling and simulation help provide a better understanding of how real-world systems function, they also enable us to predict system behavior before a system is actually built and analyze systems accurately under varying operating conditions. Modeling and Simulation of Systems Using MATLAB® and Simulink® provides comprehensive, state-of-the-art coverage of all the important aspects of modeling and simulating both physical and conceptual systems. Various real-life examples show how simulation plays a key role in understanding real-world systems. The author also explains how to effectively use MATLAB and Simulink software to successfully apply the modeling and simulation techniques presented. After introducing the underlying philosophy of systems, the book offers step-by-step procedures for modeling different types of systems using modeling techniques, such as the graph-theoretic approach, interpretive structural modeling, and system dynamics modeling. It then explores how simulation evolved from pre-computer days into the current science of today. The text also presents modern soft computing techniques, including artificial neural networks, fuzzy systems, and genetic algorithms, for modeling and simulating complex and nonlinear systems. The final chapter addresses discrete systems modeling. Preparing both undergraduate and graduate students for advanced modeling and simulation courses, this text helps them carry out effective simulation studies. In addition, graduate students should be able to comprehend and conduct simulation research after completing this book.

Download or read book Atmospheric and Space Flight Dynamics written by Ashish Tewari and published by Springer Science & Business Media. This book was released on 2007-11-15 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unified presentation that does not discriminate between atmospheric and space flight. It demonstrates that the two disciplines have evolved from the same set of physical principles and introduces a broad range of critical concepts in an accessible, yet mathematically rigorous presentation. The book presents many MATLAB and Simulink-based numerical examples and real-world simulations. Replete with illustrations, end-of-chapter exercises, and selected solutions, the work is primarily useful as a textbook for advanced undergraduate and beginning graduate-level students.

Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.

Download or read book Full scale Wind tunnel Tests of a Small Unpowered Jet Aircraft with a T Tail written by Paul T. Soderman and published by . This book was released on 1971 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aerodynamic characteristics of a full scale executive type jet transport aircraft with a T-tail were investigated in a 40 x 80 ft (12.2 by 24.4 meter) wind tunnel (subsonic). Static, longitudinal, and lateral stability, and control characteristics were determined at angles of attack from -2 deg to 42 deg. The aircraft wing had 13 deg of sweep and an aspect ratio of 5.02. The aircraft was tested power off with various wing leading- and trailing-edge high lift devices. The basic configuration was tested with and without such components as engine nacelles, wing tip tanks, and empannage. Hinge-moment data were obtained and downwash angles in the horizontal-tail plane location were calculated. The data were obtained at Reynolds numbers of 4.1 million and 8.7 million based on mean aerodynamic chord. The model had static longitudinal stability through initial stall. Severe tail buffet occurred near the angle of attack for maximum lift. Above initial stall the aircraft had pronounced pitch-up, characteristic of T-tail configurations. A stable trim point was possible at angles of attack between 30 deg and 40 deg (depending on c.g. location and flap setting). Hinge-moment data showed no regions with adverse effects on stick force. Comparisons of wind-tunnel data and flight-test are presented.

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book Journal of Guidance Control and Dynamics written by and published by . This book was released on 2009 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Computing with MATLAB written by Cleve B. Moler and published by SIAM. This book was released on 2010-08-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised textbook for introductory courses in numerical methods, MATLAB and technical computing, which emphasises the use of mathematical software.

Download or read book Aircraft Dynamics written by Marcello R. Napolitano and published by Wiley Global Education. This book was released on 2012-04-13 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st edition of Aircraft Dynamics: from Modeling to Simulation by Marcello R. Napolitano is an innovative textbook with specific features for assisting, motivating and engaging aeronautical/aerospace engineering students in the challenging task of understanding the basic principles of aircraft dynamics and the necessary skills for the modeling of the aerodynamic and thrust forces and moments. Additionally the textbook provides a detailed introduction to the development of simple but very effective simulation environments for today demanding students as well as professionals. The book contains an abundance of real life students sample problems and problems along with very useful Matlab codes.

Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.

Download or read book Aircraft Control and Simulation written by Brian L. Stevens and published by John Wiley & Sons. This book was released on 2003-10-06 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition covers aerodynamics, the control systems and the mathematics involved in analysing the performance of aircraft not only in the real world but also in computer-simulated flight and gaming. It includes new computer calculations in MatLab, which is commonly used in the industry.