Download or read book Learning for Adaptive and Reactive Robot Control written by Aude Billard and published by MIT Press. This book was released on 2022-02-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods by which robots can learn control laws that enable real-time reactivity using dynamical systems; with applications and exercises. This book presents a wealth of machine learning techniques to make the control of robots more flexible and safe when interacting with humans. It introduces a set of control laws that enable reactivity using dynamical systems, a widely used method for solving motion-planning problems in robotics. These control approaches can replan in milliseconds to adapt to new environmental constraints and offer safe and compliant control of forces in contact. The techniques offer theoretical advantages, including convergence to a goal, non-penetration of obstacles, and passivity. The coverage of learning begins with low-level control parameters and progresses to higher-level competencies composed of combinations of skills. Learning for Adaptive and Reactive Robot Control is designed for graduate-level courses in robotics, with chapters that proceed from fundamentals to more advanced content. Techniques covered include learning from demonstration, optimization, and reinforcement learning, and using dynamical systems in learning control laws, trajectory planning, and methods for compliant and force control . Features for teaching in each chapter: applications, which range from arm manipulators to whole-body control of humanoid robots; pencil-and-paper and programming exercises; lecture videos, slides, and MATLAB code examples available on the author’s website . an eTextbook platform website offering protected material[EPS2] for instructors including solutions.

Download or read book Advanced Robotics Intelligent Machines written by J. O. Gray and published by IET. This book was released on 1996 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced robotics describes the use of sensor-based robotic devices which exploit powerful computers to achieve the high levels of functionality that begin to mimic intelligent human behaviour. The object of this book is to summarise developments in the base technologies, survey recent applications and highlight new advanced concepts which will influence future progress.

Download or read book Intelligent Assembly Systems written by Mark H. Lee and published by World Scientific. This book was released on 1995 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a key area of industrial robotics ? the automation of small batch assembly. Assembly imparts enormous added value but turns out to be extraordinarily difficult to automate. The work presented here, all from the Centre for Intelligent Systems at the University of Wales, Aberystwyth, addresses this issue and shows ways in which the difficulties may be reduced through systematic architectural designs and specific structures for interfacing and controlling sensory-actuation systems. The book develops three main themes: a task-centred approach to robotic assembly, explicit reasoning techniques for fault diagnosis and error handling; and sensor-actuator integration methods. These are vital topics for those concerned with flexible automation and robotics.

Download or read book Robot Programming by Demonstration written by Sylvain Calinon and published by EPFL Press. This book was released on 2009-08-24 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in RbD have identified a number of key issues for ensuring a generic approach to the transfer of skills across various agents and contexts. This book focuses on the two generic questions of what to imitate and how to imitate and proposes active teaching methods.

Download or read book Behavior Trees in Robotics and AI written by Michele Colledanchise and published by CRC Press. This book was released on 2018-07-20 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behavior Trees (BTs) provide a way to structure the behavior of an artificial agent such as a robot or a non-player character in a computer game. Traditional design methods, such as finite state machines, are known to produce brittle behaviors when complexity increases, making it very hard to add features without breaking existing functionality. BTs were created to address this very problem, and enables the creation of systems that are both modular and reactive. Behavior Trees in Robotics and AI: An Introduction provides a broad introduction as well as an in-depth exploration of the topic, and is the first comprehensive book on the use of BTs. This book introduces the subject of BTs from simple topics, such as semantics and design principles, to complex topics, such as learning and task planning. For each topic, the authors provide a set of examples, ranging from simple illustrations to realistic complex behaviors, to enable the reader to successfully combine theory with practice. Starting with an introduction to BTs, the book then describes how BTs relate to, and in many cases, generalize earlier switching structures, or control architectures. These ideas are then used as a foundation for a set of efficient and easy to use design principles. The book then presents a set of important extensions and provides a set of tools for formally analyzing these extensions using a state space formulation of BTs. With the new analysis tools, the book then formalizes the descriptions of how BTs generalize earlier approaches and shows how BTs can be automatically generated using planning and learning. The final part of the book provides an extended set of tools to capture the behavior of Stochastic BTs, where the outcomes of actions are described by probabilities. These tools enable the computation of both success probabilities and time to completion. This book targets a broad audience, including both students and professionals interested in modeling complex behaviors for robots, game characters, or other AI agents. Readers can choose at which depth and pace they want to learn the subject, depending on their needs and background.

Download or read book Handbook of Industrial Robotics written by Shimon Y. Nof and published by John Wiley & Sons. This book was released on 1999-03-02 with total page 1388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrieroboter gehoren heute zum Alltag. In den letzten zehn Jahren verlagerte sich der Schwerpunkt der Neuentwicklungen weg von den Robotern selbst, hin zu alternativen Formen der kunstlichen Intelligenz, mit denen die Gerate ausgestattet werden. Dem Rechnung tragend, beschaftigt sich die zweite Auflage dieses Handbuchs vor allem mit Anwendungen und Strategien zur Problemlosung in der Industrie. Angesprochen werden Themen wie Graphiksimulatoren, objektorientierte Software, Kommunikationssysteme und Mikro- und Nanoroboter. (04/99)

Download or read book Proceedings 1990 IEEE International Conference on Robotics and Automation written by and published by . This book was released on 1990 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Artificial Intelligence Compendium Abstracts I written by and published by Scientific Datalink. This book was released on 1988 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Designing Robot Behavior in Human Robot Interactions written by Changliu Liu and published by CRC Press. This book was released on 2019-09-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we have set up a unified analytical framework for various human-robot systems, which involve peer-peer interactions (either space-sharing or time-sharing) or hierarchical interactions. A methodology in designing the robot behavior through control, planning, decision and learning is proposed. In particular, the following topics are discussed in-depth: safety during human-robot interactions, efficiency in real-time robot motion planning, imitation of human behaviors from demonstration, dexterity of robots to adapt to different environments and tasks, cooperation among robots and humans with conflict resolution. These methods are applied in various scenarios, such as human-robot collaborative assembly, robot skill learning from human demonstration, interaction between autonomous and human-driven vehicles, etc. Key Features: Proposes a unified framework to model and analyze human-robot interactions under different modes of interactions. Systematically discusses the control, decision and learning algorithms to enable robots to interact safely with humans in a variety of applications. Presents numerous experimental studies with both industrial collaborative robot arms and autonomous vehicles.

Download or read book Advances in Automotive Production Technology Theory and Application written by Philipp Weißgraeber and published by Springer Nature. This book was released on 2021-06-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the series ARENA2036 compiles the outcomes of the first Stuttgart Conference on Automotive Production (SCAP2020). It contains peer-reviewed contributions from a theoretical as well as practical vantage point and is topically structured according to the following four sections: It discusses (I) Novel Approaches for Efficient Production and Assembly Planning, (II) Smart Production Systems and Data Services, (III) Advances in Manufacturing Processes and Materials, and (IV) New Concepts for Autonomous, Collaborative Intralogistics. Given the restrictive circumstances of 2020, the conference was held as a fully digital event divided into two parts. It opened with a pre-week, allowing everyone to peruse the scientific contributions at their own pace, followed by a two-day live event that enabled experts from the sciences and the industry to engage in various discussions. The conference has proven itself as an insightful forum that allowed for an expertly exchange regarding the pivotal Advances in Automotive Production and Technology.

Download or read book Designing Autonomous Agents written by Pattie Maes and published by MIT Press. This book was released on 1990 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Autonomous Agents provides a summary and overview of the radically different architectures that have been developed over the past few years for organizing robots. These architectures have led to major breakthroughs that promise to revolutionize the study of autonomous agents and perhaps artificial intelligence in general. The new architectures emphasize more direct coupling of sensing to action, distributedness and decentralization, dynamic interaction with the environment, and intrinsic mechanisms to cope with limited resources and incomplete knowledge. The research discussed here encompasses such important ideas as emergent functionality, task-level decomposition, and reasoning methods such as analogical representations and visual operations that make the task of perception more realistic. Contents A Biological Perspective on Autonomous Agent Design, Randall D. Beer, Hillel J. Chiel, Leon S. Sterling * Elephants Don't Play Chess, Rodney A. Brooks * What Are Plans For? Philip E. Agre and David Chapman * Action and Planning in Embedded Agents, Leslie Pack Kaelbling and Stanley J. Rosenschein * Situated Agents Can Have Goals, Pattie Maes * Exploiting Analogical Representations, Luc Steels * Internalized Plans: A Representation for Action Resources, David W. Payton * Integrating Behavioral, Perceptual, and World Knowledge in Reactive Navigation, Ronald C. Arkin * Symbol Grounding via a Hybrid Architecture in an Autonomous Assembly System, Chris Malcolm and Tim Smithers * Animal Behavior as a Paradigm for Developing Robot Autonomy, Tracy L. Anderson and Max Donath

Download or read book Robot Control 1988 SYROCO 88 written by U. Rembold and published by Elsevier. This book was released on 2014-05-23 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing 88 papers, the emphasis of this volume is on the control of advanced robots. These robots may be self-contained or part of a system. The applications of such robots vary from manufacturing, assembly and material handling to space work and rescue operations. Topics presented at the Symposium included sensors and robot vision systems as well as the planning and control of robot actions. Main topics covered include the design of control systems and their implementation; advanced sensors and multisensor systems; explicit robot programming; implicit (task-orientated) robot programming; interaction between programming and control systems; simulation as a programming aid; AI techniques for advanced robot systems and autonomous robots.

Download or read book Robotics Research written by Yoshiaki Shirai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Eighth International Symposium of Robotics Research was held in Kanagawa, Japan, on October 4-7 1997; Robotics Research presents the findings of this symposium. The papers, written by international specialists in the field, cover the many topics concerning advanced robotics today, ranging from practical system design to theoretical reasoning and planning. They assess the state of the field and discuss all the current and emerging trends dealing with, amongst many other topics, mobile robotics, manufacturing, learning from humans, autonomous land vehicles, humanoid robots, future robots, and new components. The reader will share with the attendees the meaningful steps forward in building the emerging body of concepts, methods, scientific and technical knowledge that shape modern day robotics.

Download or read book Cybernetics And Systems Research 92 Proceedings Of The 11th European Meeting On Cybernetics And Systems Research In 2 Volumes written by Robert Trappl and published by World Scientific. This book was released on 1992-03-27 with total page 1740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 210 articles which are divided into 18 sections in this new reference work represent the most recent findings in cybernetics and systems research. It brings together contributions from leading scientists from all over the world — Europe, North America, South America, Asia, Africa and Australia. This volume therefore gives a broad spectrum of the ongoing research worldwide.Topics covered in the 18 sections are: General Systems Methodology; Mathematical Systems Theory; Computer Aided Process Interpretation; Fuzzy Sets, Approximate Reasoning and Knowledge-based Systems; Designing and Systems; Biocybernetics and Mathematical Biology; Cybernetics in Medicine; Cybernetics of Socioeconomic Systems; Systems, Management and Organization; Cybernetics of National Development; Communication and Computers; Connectionism and Cognitive Processing; Intelligent Autonomous Systems; Artificial Intelligence; Impacts of Artificial Intelligence.

Download or read book The Artificial Intelligence Compendium Subject index II Met Z written by and published by . This book was released on 1988 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-12-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.

Download or read book Robotic Systems and AMT written by Gideon Halevi and published by North Holland. This book was released on 1990 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: A team of international researchers and top-level professionals contribute to this book, which analyzes the complexities of computer-integrated manufacturing (CIM) and Factory of the Future' technologies, not only for big industrial concerns but also for mid-size and small industrial systems. Among the topics discussed are managerial strategies, integrative tools and various aspects of the implementation of information technology in production operations. The largest of the six sections of the book is concerned with the current state of research in robotics.