Download or read book Software Reliability written by A. Bendell and published by Elsevier. This book was released on 2014-05-17 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth models. The next chapter deals with methods for predicting and estimating software reliability, with emphasis on their strengths and weaknesses. The reader is methodically introduced to formal inspection in software development; the effects of product design, program structure, development methods, and the environments of product testing and use on product reliability; and types of software metrics in relation to reliability. The remaining chapters explore the ways in which software engineers have sought to achieve software reliability through testing; problems and standards in software reliability data collection; and applications of time series models to software reliability analysis. This monograph will be of interest to software engineers and designers.
Download or read book Advances in Human Error Reliability Resilience and Performance written by Ronald L. Boring and published by Springer. This book was released on 2019-06-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together studies broadly addressing human error from different disciplines and perspectives. It discusses topics such as human performance; human variability and reliability analysis; medical, driver and pilot error, as well as automation error; root cause analyses; and the cognitive modeling of human error. In addition, it highlights cutting-edge applications in safety management, defense, security, transportation, process controls, and medicine, as well as more traditional fields of application. Based on the AHFE 2019 International Conference on Human Error, Reliability, Resilience, and Performance, held on July 24-28, 2019, Washington D.C., USA, the book includes experimental papers, original reviews, and reports on case studies, as well as meta-analyses, technical guidelines, best practice and methodological papers. It offers a timely reference guide for researchers and practitioners dealing with human error in a diverse range of fields.
Download or read book Contemporary Ergonomics and Human Factors 2014 written by Sarah Sharples and published by CRC Press. This book was released on 2014-04-04 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broad and developing scope of human factors and ergonomics - the application of scientific knowledge to improve people’s interaction with products, systems and environments - has been illustrated for 28 years by the books which make up the Contemporary Ergonomics series. This book presents the proceedings of the international conference – Ergonomics and Human Factors 2014. In addition to being the leading event in the UK that features ergonomics and human factors across all sectors, this is also the annual meeting of the Institute of Ergonomics & Human Factors. Individual papers provide insight into current practice, present new research findings and form an invaluable reference source. The volumes provide a fast track for the publication of suitable papers from international contributors, with papers being subject to peer review since 2009 and selected by the conference programme committee. A wide range of topics are covered in these proceedings including workload, human capability, systems, product design, manufacturing systems, behaviour change, health and wellbeing, organisational culture, smart environments and sustainability, transport and musculoskeletal disorders. As well as being of interest to mainstream ergonomists and human factors specialists, Contemporary Ergonomics and Human Factors will appeal to all those who are concerned with people's interactions with their working and leisure environment including designers, manufacturing and production engineers, health and safety specialists, occupational, applied and industrial psychologists, and applied physiologists.
Download or read book Human Factors in the Design and Evaluation of Central Control Room Operations written by Neville A. Stanton and published by CRC Press. This book was released on 2009-11-18 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether used for aviation, manufacturing, oil and gas extraction, energy distribution, nuclear or fossil fuel power generation, surveillance or security, all control rooms share two common features. The people operating them are often remote from the processes that they are monitoring and controlling and the operations work 24/7. The twin demands o
Download or read book Human Factors in the Chemical and Process Industries written by Janette Edmonds and published by Elsevier. This book was released on 2016-09-17 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Factors in the Chemical and Process Industries: Making it Work in Practice is a comprehensive overview of human factors within this sector, focusing on the practical application. It has been written by acknowledged industry experts from the Keil Centre, which is a leading practice of chartered ergonomics and human factors specialists, chartered safety specialists, registered occupational psychologists, and registered clinical psychologists The book was inspired by the international human factors training course run by the Keil Centre with the IChemE(http://www.icheme.org/human-factors), which has reached four continents across the world. The book is written for those who want a comprehensive overview of the subject, focusing on the practical application of human factors. It has been written for safety professionals, engineers and operational disciplines within industry, and those aspiring to these disciplines, who either deal with human factors issues or any aspect of the 'human element' in their core role. The book explains what 'human factors' is about and how human factors issues are best managed from a practical perspective. It will help readers develop a greater understanding of the area and how to establish more effective solutions for human factors related issues. - Provides comprehensive coverage of the most relevant human factors within this sector, with succinct overviews of each topic - Uses case studies and practical examples to illustrate topics and explains the material in a fully accessible, easy to understand style - Written by a single team of eleven industry practitioners, drawing on the combined expertise of different human factors specialisms which are rarely comprehensively combined in a single resource
Download or read book Human Factors Models for Aviation Accident Analysis and Prevention written by Thomas G.C. Griffin and published by Ashgate Publishing, Ltd.. This book was released on 2015-03-28 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation and modelling of aviation accident causation is dominated by linear models. Aviation is, however, a complex system and as such suffers from being artificially manipulated into non-complex models and methods. This book addresses this issue by developing a new approach to investigating aviation accident causation through information networks. These networks centralise communication and the flow of information as key indicators of a system’s health and risk. This holistic approach focuses on the system environment, the activity that takes place within it, the strategies used to conduct this activity, the way in which the constituent parts of the system (both human and non-human) interact and the behaviour required. Each stage of this book identifies and expands upon the potential of the information network approach, maintaining firm focus on the overall health of a system. The book’s new model offers many potential developments and some key areas are studied in this research. Through the centralisation of barriers and information nodes the method can be applied to almost any situation. The application of Bayesian mathematics to historical data populations provides scope for studying error migration and barrier manipulation. The book also provides application of these predictions to a flight simulator study for the purposes of validation. Beyond this it also discusses the applicability of the approach to industry. Through working with a legacy airline the methods discussed are used as the basis for a new and prospective safety management system.
Download or read book Cognition and Safety written by Oliver Sträter and published by Routledge. This book was released on 2016-12-05 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety suffers from the variety of methods and models that are used to assess human performance. For example, operation is concerned primarily with human error, while design deals with aligning the system to workload or situational awareness, and the gap between the two disassociates safety assessment from design. As a result, system design creates constraints for the operator working at the sharp-end, which will inevitably lead to human error. Accidents and incidents across all industries have demonstrated the safety significance of this gap. Cognition and Safety provides an integrated view of cognitive human issues to better enhance safety. It combines operational with design-related concepts of cognitive performance to provide an approach for safely managing cognitive issues throughout the lifecycle of a system, from operational to senior management levels. The book will be of direct interest to operational managers, designers, training specialists, safety managers and operational staff dealing with human factors and safety issues; scientists in the area of safety, ergonomics and human factors; regulators dealing with safety and human factors, and practitioners in the field of human reliability.
Download or read book Fundamentals of Risk Management for Process Industry Engineers written by Maureen Hassall and published by Elsevier. This book was released on 2023-04-19 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Risk Management for Process Industry Engineers outlines foundational principles of human-centered, sociotechnical risk management, and how they can be applied to deliver real improvements in risk identification, understanding, analysis, control, communication, and governance. To maximize sustainable competitiveness requires the identification and optimization of the range of risks that can impact a business. Hence, understanding the foundational principles of sociotechnical risk management is required to design and execute effective risk identification, optimization, and management strategies. - Covers the foundations of risk management - Explains how risk management and professional engineering practice are interrelated - Describes the role and importance of humans in risk management activities - Discusses the fundamentals surrounding how to identify, assess, treat, monitor, and review risks in high hazard industries - Presents the range of operational risks faced by process companies, including safety and health, environmental and social risk, project risk, and supply chain risk
Download or read book A Guide To Practical Human Reliability Assessment written by B. Kirwan and published by CRC Press. This book was released on 2017-12-14 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human error is here to stay. This perhaps obvious statement has a profound implication for society when faced with the types of hazardous system accidents that have occurred over the past three decades. Such accidents have been strongly influenced by human error, yet many system designs in existence or being planned and built do not take human error into consideration.; "A Guide to Practical Human Reliability Assessment" is a practical and pragmatic guide to the techniques and approaches of human reliability assessment HRA. lt offers the reader explanatory and practical methods which have been applied and have worked in high technology and high risk assessments - particularly but not exclusively to potentially hazardous industries such as exist in process control, nuclear power, chemical and petrochemical industries. A Guide to Practical Human Reliability Assessment offers the practitioner a comprehensive tool-kit of different approaches along with guidance on selecting different methods for different applications. It covers the risk assessment and the HRA process, as well as methods of task analysis, error identification, quantification, representation of errors in the risk analysis, followed by error reduction analysis, quality assurance and documentation. There are also a number of detailed case studies from nuclear, chemical, offshore, and marine HRA'S, exemplfying the image of techniques and the impact of HRA in existing and design-stage systems.
Download or read book Risk Assessment written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-03-03 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces risk assessment with key theories, proven methods, and state-of-the-art applications Risk Assessment: Theory, Methods, and Applications remains one of the few textbooks to address current risk analysis and risk assessment with an emphasis on the possibility of sudden, major accidents across various areas of practice—from machinery and manufacturing processes to nuclear power plants and transportation systems. Updated to align with ISO 31000 and other amended standards, this all-new 2nd Edition discusses the main ideas and techniques for assessing risk today. The book begins with an introduction of risk analysis, assessment, and management, and includes a new section on the history of risk analysis. It covers hazards and threats, how to measure and evaluate risk, and risk management. It also adds new sections on risk governance and risk-informed decision making; combining accident theories and criteria for evaluating data sources; and subjective probabilities. The risk assessment process is covered, as are how to establish context; planning and preparing; and identification, analysis, and evaluation of risk. Risk Assessment also offers new coverage of safe job analysis and semi-quantitative methods, and it discusses barrier management and HRA methods for offshore application. Finally, it looks at dynamic risk analysis, security and life-cycle use of risk. Serves as a practical and modern guide to the current applications of risk analysis and assessment, supports key standards, and supplements legislation related to risk analysis Updated and revised to align with ISO 31000 Risk Management and other new standards and includes new chapters on security, dynamic risk analysis, as well as life-cycle use of risk analysis Provides in-depth coverage on hazard identification, methodologically outlining the steps for use of checklists, conducting preliminary hazard analysis, and job safety analysis Presents new coverage on the history of risk analysis, criteria for evaluating data sources, risk-informed decision making, subjective probabilities, semi-quantitative methods, and barrier management Contains more applications and examples, new and revised problems throughout, and detailed appendices that outline key terms and acronyms Supplemented with a book companion website containing Solutions to problems, presentation material and an Instructor Manual Risk Assessment: Theory, Methods, and Applications, Second Edition is ideal for courses on risk analysis/risk assessment and systems engineering at the upper-undergraduate and graduate levels. It is also an excellent reference and resource for engineers, researchers, consultants, and practitioners who carry out risk assessment techniques in their everyday work.
Download or read book The Safety of Systems written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2008-03-05 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Safety of Systems contains the invited papers presented at the fifteenth annual Safety-critical Systems Symposium, held at Bristol, UK in February 2007. The papers included in this volume cover a broad spectrum of important safety issues. They provide a combination of industrial experience and recent developments, and are presented under a variety of headings.
Download or read book The Occupational Ergonomics Handbook written by Waldemar Karwowski and published by CRC Press. This book was released on 1998-12-18 with total page 2092 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational ergonomics and safety studies the application of human behavior, abilities, limitations, and other characteristics to the design, testing, and evaluation of tools, machines, systems, tasks, jobs, and environments for productive, safe, comfortable, and effective use. Occupational Ergonomics Handbook provides current, comprehensive knowledge in this broad field, providing essential, state-of-the-art information from nearly 150 international leaders of this discipline. The text assesses the knowledge and expertise applied to industrial environments: Providing engineering guidelines for redesigning tools, machines, and work layouts Evaluating the demands placed on workers by current jobs Simulating alternative work methods Determining the potential for reducing physical job demands based on the implementation of new methods Topics also include: Fundamental ergonomic design principles at work Work-related musculoskeletal injuries, such as cumulative trauma to the upper extremity (CTDs) and low back disorders (LBDs), which affect several million workers each year with total costs exceeding $100 billion annually Current knowledge used for minimizing human suffering, potential for occupational disability, and related worker's compensation costs Working conditions under which musculoskeletal injuries might occur Engineering design measures for eliminating or reducing known job-risk factors Optimal manufacturing processes regarding human perceptual and cognitive abilities as well as task reliability Identifying the worker population affected by adverse conditions Early medical and work intervention efforts Economics of an ergonomics maintenance program Ergonomics as an essential cost to doing business Ergonomics intervention includes design for manufacturability, total quality management, and work organization. Occupational Ergonomics Handbook demonstrates how ergonomics serves as a vital component for the activities of the company and enables an advantageous cooperation between management and labor. This new handbook serves a broad segment of industrial practitioners, including industrial and manufacturing engineers; managers; plant supervisors and ergonomics professionals; researchers and students from academia, business, and government; human factors and safety specialists; physical therapists; cognitive and work psychologists; sociologists; and human-computer communications specialists.
Download or read book Reliability Technology written by Jørgen Møltoft and published by North Holland. This book was released on 1986 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety and Reliability Theory and Applications written by Marko Cepin and published by CRC Press. This book was released on 2017-06-14 with total page 3668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Theory and Applications contains the contributions presented at the 27th European Safety and Reliability Conference (ESREL 2017, Portorož, Slovenia, June 18-22, 2017). The book covers a wide range of topics, including: • Accident and Incident modelling • Economic Analysis in Risk Management • Foundational Issues in Risk Assessment and Management • Human Factors and Human Reliability • Maintenance Modeling and Applications • Mathematical Methods in Reliability and Safety • Prognostics and System Health Management • Resilience Engineering • Risk Assessment • Risk Management • Simulation for Safety and Reliability Analysis • Structural Reliability • System Reliability, and • Uncertainty Analysis. Selected special sessions include contributions on: the Marie Skłodowska-Curie innovative training network in structural safety; risk approaches in insurance and fi nance sectors; dynamic reliability and probabilistic safety assessment; Bayesian and statistical methods, reliability data and testing; oganizational factors and safety culture; software reliability and safety; probabilistic methods applied to power systems; socio-technical-economic systems; advanced safety assessment methodologies: extended Probabilistic Safety Assessment; reliability; availability; maintainability and safety in railways: theory & practice; big data risk analysis and management, and model-based reliability and safety engineering. Safety and Reliability – Theory and Applications will be of interest to professionals and academics working in a wide range of industrial and governmental sectors including: Aeronautics and Aerospace, Automotive Engineering, Civil Engineering, Electrical and Electronic Engineering, Energy Production and Distribution, Environmental Engineering, Information Technology and Telecommunications, Critical Infrastructures, Insurance and Finance, Manufacturing, Marine Industry, Mechanical Engineering, Natural Hazards, Nuclear Engineering, Offshore Oil and Gas, Security and Protection, Transportation, and Policy Making.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Human Work 2nd Edition written by E. N. Corlett and published by CRC Press. This book was released on 1995-10-13 with total page 1156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising a compendium of ergonomics methods and techniques, this text covers every aspect of human work. This edition provides a reworking of existing chapters on the framework and context of methodology, the observation of performance, task analysis, experimental and study design, data collection, product assessment, environmental assessments, measurement of work and the evaluation of work systems. New chapters cover topics including: the human-computer interface; computer-aided design; work stress; psychophysiological function; risk evaluation; fieldwork; and participatory work design.
