Download or read book Logistics of Production and Inventory written by S.C. Graves and published by Elsevier. This book was released on 1993-05-27 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook

Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.

Download or read book Inventory Control written by Sven Axsäter and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem information technology has created new possibilities for more sophisticated and efficient control of supply chains. Most organizations can reduce their material flow costs substantially. Inventory control techniques are very important components in this development process. A thorough understanding of relevant inventory models is a prerequisite for successful implementation. I hope that this book will be a useful tool in acquiring such an understanding. Nearly ten years ago I wrote a Swedish book on inventory control. This previous book has been used in courses in production and inventory control at several Swed ish engineering schools and has also been appreciated by many practitioners in the field. Positive reactions from many readers have occasionally made me contemplate writing a new book in English on the same subject. Encouraging support of this idea from the Kluwer Editors Fred Hillier and Gary Folven finally convinced me to go ahead with the project. The result is this new book, which in many ways differs from its Swedish prede cessor. Some differences are due to recent developments in inventory control. Fur thermore, this new book is in a sense more theoretical. In particular, it is to a larger extent focused on creating a good basic understanding of different possible ap proaches when analyzing inventory models.

Download or read book Quantitative Models for Supply Chain Management written by Sridhar Tayur and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative models and computer-based tools are essential for making decisions in today's business environment. These tools are of particular importance in the rapidly growing area of supply chain management. This volume is a unified effort to provide a systematic summary of the large variety of new issues being considered, the new set of models being developed, the new techniques for analysis, and the computational methods that have become available recently. The volume's objective is to provide a self-contained, sophisticated research summary - a snapshot at this point of time - in the area of Quantitative Models for Supply Chain Management. While there are some multi-disciplinary aspects of supply chain management not covered here, the Editors and their contributors have captured many important developments in this rapidly expanding field. The 26 chapters can be divided into six categories. Basic Concepts and Technical Material (Chapters 1-6). The chapters in this category focus on introducing basic concepts, providing mathematical background and validating algorithmic tools to solve operational problems in supply chains. Supply Contracts (Chapters 7-10). In this category, the primary focus is on design and evaluation of supply contracts between independent agents in the supply chain. Value of Information (Chapters 11-13). The chapters in this category explicitly model the effect of information on decision-making and on supply chain performance. Managing Product Variety (Chapters 16-19). The chapters in this category analyze the effects of product variety and the different strategies to manage it. International Operations (Chapters 20-22). The three chapters in this category provide an overview of research in the emerging area of International Operations. Conceptual Issues and New Challenges (Chapters 23-27). These chapters outline a variety of frameworks that can be explored and used in future research efforts. This volume can serve as a graduate text, as a reference for researchers and as a guide for further development of this field.

Download or read book Beyond Manufacturing Resource Planning MRP II written by Andreas Drexl and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The logic of Manufacturing Resource Planning (MRP II) is im plemented in most commercial production planning software tools and is commonly accepted by practitioners. However, these peo ple are not satisfied with production planning and complain about long lead times, high work-in-process, and backlogging. As many researchers have pointed out, the reason for these shortcomings is inherent to the methods that are used. The research community is thus eager to find more sophisticated approaches. This book is an attempt to compile some state-of-the-art work in the field of production planning research. It includes mate rial that somehow dominates the existing MRP II concept. 15 ar ticles written by 36 authors from 10 countries cover many aspects related to MRP II. All papers went through a single-blind refere eing process before they were selected for being published in this book. When we received papers for this issue, we discovered that MRP II is a topic about which not only management scientists show interest. As the list of authors proves, industrial engineers, computer scientists, and-operations researchers from academia as well as practitioners have contributed to this book. This, we hope, makes the book of value for a broad audience. We thank all authors who submitted papers. And, we are in debted to Dr. Werner Muller from Springer for his support in this book project.

Download or read book Principles of Inventory Management written by John A. Muckstadt and published by Springer Science & Business Media. This book was released on 2010-03-20 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inventories are prevalent everywhere in the commercial world, whether it be in retail stores, manufacturing facilities, government stockpile material, Federal Reserve banks, or even your own household. This textbook examines basic mathematical techniques used to sufficiently manage inventories by using various computational methods and mathematical models. The text is presented in a way such that each section can be read independently, and so the order in which the reader approaches the book can be inconsequential. It contains both deterministic and stochastic models along with algorithms that can be employed to find solutions to a variety of inventory control problems. With exercises at the end of each chapter and a clear, systematic exposition, this textbook will appeal to advanced undergraduate and first-year graduate students in operations research, industrial engineering, and quantitative MBA programs. It also serves as a reference for professionals in both industry and government worlds. The prerequisite courses include introductory optimization methods, probability theory (non-measure theoretic), and stochastic processes.

Download or read book Inventory and Production Management in Supply Chains written by Edward A. Silver and published by CRC Press. This book was released on 2016-12-19 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a team of experts, the new edition of this bestseller presents practical techniques for managing inventory and production throughout supply chains. It covers the current context of inventory and production management, replenishment systems for managing individual inventories within a firm, managing inventory in multiple locations and firms, and production management. The book presents sophisticated concepts and solutions with an eye towards today’s economy of global demand, cost-saving, and rapid cycles. It explains how to decrease working capital and how to deal with coordinating chains across boundaries.

Download or read book Encyclopedia of Optimization written by Christodoulos A. Floudas and published by Springer Science & Business Media. This book was released on 2008-09-04 with total page 4646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the Encyclopedia of Optimization is to introduce the reader to a complete set of topics that show the spectrum of research, the richness of ideas, and the breadth of applications that has come from this field. The second edition builds on the success of the former edition with more than 150 completely new entries, designed to ensure that the reference addresses recent areas where optimization theories and techniques have advanced. Particularly heavy attention resulted in health science and transportation, with entries such as "Algorithms for Genomics", "Optimization and Radiotherapy Treatment Design", and "Crew Scheduling".

Download or read book An Annotated Timeline of Operations Research written by Saul I. Gass and published by Springer Science & Business Media. This book was released on 2007-02-15 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Annotated Timeline of Operations Research: An Informal History recounts the evolution of Operations Research (OR) as a new science - the science of decision making. Arising from the urgent operational issues of World War II, the philosophy and methodology of OR has permeated the resolution of decision problems in business, industry, and government. The Timeline chronicles the history of OR in the form of self-contained, expository entries. Each entry presents a concise explanation of the events and people under discussion, and provides key sources where further relevant information can be obtained. In addition, books and papers that have influenced the development of OR or helped to educate the first generations of OR academics and practitioners are cited throughout the book. Starting in 1564 with seminal ideas that form the precursors of OR, the Timeline traces the key ideas and events of OR through 2004. The Timeline should interest anyone involved in OR - researchers, practitioners, academics, and, especially, students - who wish to learn how OR came into being. Further, the scope and expository style of the Timeline should make it of value to the general reader interested in the development of science and technology in the last half of the twentieth century.

Download or read book Technical Report written by and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Perspectives in Operations Management written by Rakesh K. Sarin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 1992 a conference honoring Elwood S. Buffa was held at the Anderson Graduate School of Management of the University of California, Los Angeles. This book is a collection of the work presented at that conference. The scholars who gathered to honor El are the prominent researchers in the field of Operations Management. Their collective work published in this book represents the richness of the field and provides the reader with valuable insights into its important issues and problems. While any grouping of the articles by these distinguished scholars will be arbitrary, I have organized the book in four sections. In the first section the articles dealing with the strategic issues in Operations Management are compiled. The articles deal with continuous improvement, quality, services, supply chain management, and creating value through operations. The articles that explore the interface of Operations Management with other functional areas, e.g. engineering and marketing, are grouped in the second section. The third section of the book contains articles that attempt to model some important planning problems that arise in the management of production and operations. Some of the papers in this section provide state of the art reviews of selected topic areas. Finally, the fourth section contains articles that deal with future directions for Operations Management. The authors offer several insights into the future evolution of the field. The book begins with the keynote address given by El Buffa at the start of the conference on November 2, 1991.

Download or read book Introduction to Computational Optimization Models for Production Planning in a Supply Chain written by Stefan Voß and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: An easy-to-read introduction to the concepts associated with the creation of optimization models for production planning starts off this book. These concepts are then applied to well-known planning models, namely mrp and MRP II. From this foundation, fairly sophisticated models for supply chain management are developed. Another unique feature is that models are developed with an eye toward implementation. In fact, there is a chapter that provides explicit examples of implementation of the basic models using a variety of popular, commercially available modeling languages.

Download or read book Production and Operations Analysis written by Steven Nahmias and published by Waveland Press. This book was released on 2015-01-15 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Seventh Edition of Production and Operations Analysis builds a solid foundation for beginning students of production and operations management. Continuing a long tradition of excellence, Nahmias and Olsen bring decades of combined experience to craft the most clear and up-to-date resource available. The authors’ thorough updates include incorporation of current technology that improves the effectiveness of production processes, additional qualitative sections, and new material on service operations management and servicization. Bolstered by copious examples and problems, each chapter stands alone, allowing instructors to tailor the material to their specific needs. The text is essential reading for learning how to better analyze and improve on all facets of operations.

Download or read book Supply Chain Coordination under Uncertainty written by Tsan-Ming Choi and published by Springer Science & Business Media. This book was released on 2011-08-14 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Channel coordination is a core subject of supply chain management. Over the past decade, much research effort has been devoted to exploring the detailed mechanisms for achieving supply chain coordination under uncertainty, generating many fruitful analytical and empirical results. Despite the abundance of research results, there is an absence of a comprehensive reference source that provides state-of-the-art findings on both theoretical and applied research on the subject. In addition, with the advance of knowledge and technologies, many new topics on supply chain coordination under uncertainty have appeared in recent years. This handbook extensively examines supply chain coordination challenges with a focal point on discovering innovative measures that can help tackle the existing and emerging challenges. The book is organized into five parts, which include chapters on innovative analytical models for coordination, channel power and bargaining, technological advancements and applications, empirical analysis, cases studies and review. This handbook provides new empirical and analytical results with precious insights, which will not only help supply chain agents to understand more about the latest measures for supply chain coordination under uncertainty, but also help practitioners and researchers to know how to improve supply chain performance based on innovative methods.

Download or read book Scheduling in Supply Chains Using Mixed Integer Programming written by Tadeusz Sawik and published by John Wiley & Sons. This book was released on 2011-08-08 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unified, systematic approach to applying mixed integer programming solutions to integrated scheduling in customer-driven supply chains Supply chain management is a rapidly developing field, and the recent improvements in modeling, preprocessing, solution algorithms, and mixed integer programming (MIP) software have made it possible to solve large-scale MIP models of scheduling problems, especially integrated scheduling in supply chains. Featuring a unified and systematic presentation, Scheduling in Supply Chains Using Mixed Integer Programming provides state-of-the-art MIP modeling and solutions approaches, equipping readers with the knowledge and tools to model and solve real-world supply chain scheduling problems in make-to-order manufacturing. Drawing upon the author's own research, the book explores MIP approaches and examples-which are modeled on actual supply chain scheduling problems in high-tech industries-in three comprehensive sections: Short-Term Scheduling in Supply Chains presents various MIP models and provides heuristic algorithms for scheduling flexible flow shops and surface mount technology lines, balancing and scheduling of Flexible Assembly Lines, and loading and scheduling of Flexible Assembly Systems Medium-Term Scheduling in Supply Chains outlines MIP models and MIP-based heuristic algorithms for supplier selection and order allocation, customer order acceptance and due date setting, material supply scheduling, and medium-term scheduling and rescheduling of customer orders in a make-to-order discrete manufacturing environment Coordinated Scheduling in Supply Chains explores coordinated scheduling of manufacturing and supply of parts as well as the assembly of products in supply chains with a single producer and single or multiple suppliers; MIP models for a single- or multiple-objective decision making are also provided Two main decision-making approaches are discussed and compared throughout. The integrated (simultaneous) approach, in which all required decisions are made simultaneously using complex, monolithic MIP models; and the hierarchical (sequential) approach, in which the required decisions are made successively using hierarchies of simpler and smaller-sized MIP models. Throughout the book, the author provides insight on the presented modeling tools using AMPL® modeling language and CPLEX solver. Scheduling in Supply Chains Using Mixed Integer Programming is a comprehensive resource for practitioners and researchers working in supply chain planning, scheduling, and management. The book is also appropriate for graduate- and PhD-level courses on supply chains for students majoring in management science, industrial engineering, operations research, applied mathematics, and computer science.

Download or read book Logistics Systems Design and Optimization written by Andre Langevin and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a context of global competition, the optimization of logistics systems is inescapable. Logistics Systems: Design and Optimization falls within this perspective and presents twelve chapters that well illustrate the variety and the complexity of logistics activities. Each chapter is written by recognized researchers who have been commissioned to survey a specific topic or emerging area of logistics. The first chapter, by Riopel, Langevin, and Campbell, develops a framework for the entire book. It classifies logistics decisions and highlights the relevant linkages to logistics decisions. The intricacy of these linkages demonstrates how thoroughly the decisions are interrelated and underscores the complexity of managing logistics activities. Each of the chapters focus on quantitative methods for the design and optimization of logistics systems.

Download or read book Notices of the American Mathematical Society written by American Mathematical Society and published by . This book was released on 1984 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains articles of significant interest to mathematicians, including reports on current mathematical research.