Download or read book 78th Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2018-08-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 78th Glass Problem Conference (GPC) including the 11th Advances in Fusion and Processing of Glass (AFPG) Symposium is organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four half-day technical sessions were as follows: Modeling, Sensors, and Furnace Design James Uhlik, Toledo Engineering Company, Inc., Toledo, OH and Michelle Korwin-Edson, Owen Corning Composite Solutions, Granville, OH Refractories & Testing Laura Lowe – North American Refractory Company, Pittsburgh, PA, Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH, and Laura Lowe – North American Refractory Company, Pittsburgh, PA and Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH Combustion Glenn Neff, Glass Service USA, Inc., Stuart, FL and Uyi Iyoha, Praxair Inc., Tonawanda, NY Environmental & Safety Phil Tucker, Johns Manville, Denver, CO and Elmer Sperry, Libbey Glass, Toledo, OH
Download or read book 78th Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2018-07-11 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 78th Glass Problem Conference (GPC) including the 11th Advances in Fusion and Processing of Glass (AFPG) Symposium is organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four half-day technical sessions were as follows: Modeling, Sensors, and Furnace Design James Uhlik, Toledo Engineering Company, Inc., Toledo, OH and Michelle Korwin-Edson, Owen Corning Composite Solutions, Granville, OH Refractories & Testing Laura Lowe – North American Refractory Company, Pittsburgh, PA, Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH, and Laura Lowe – North American Refractory Company, Pittsburgh, PA and Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH Combustion Glenn Neff, Glass Service USA, Inc., Stuart, FL and Uyi Iyoha, Praxair Inc., Tonawanda, NY Environmental & Safety Phil Tucker, Johns Manville, Denver, CO and Elmer Sperry, Libbey Glass, Toledo, OH
Download or read book 73rd Conference on Glass Problems Volume 34 Issue 1 written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2013-04-22 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 73rd Glass Problem Conference is organized according to the following themes: Glass Melting, Melting, Raw Materials, Batching, and Recycling, Coatings, Strengthening, and Other Topics, Refractories, and Process Control & Modeling
Download or read book 82nd Conference on Glass Problems Volume 270 written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2022-06-15 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest issue in the industry-leading Ceramic Transactions series The most up to date entry in the Ceramic Transactions series published by The American Ceramic Society (ACerS), Ceramic Transactions: Volume 270 delivers the newest research, data, and information relevant to advanced ceramics and composites, electronic ceramics, energy materials, biomaterials, environmental issues, waste management, and nanotechnology.
Download or read book 75th Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2015-04-29 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 75th Glass Problem Conference is organized according to the following themes: Glass Melting, Forming, Energy and Environmental, Refractories, Sensors and Control, Modeling.
Download or read book 81st Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2021-06-22 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 81st Conference on Glass Problems (GPC) was organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Bob Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The GPC Advisory Board (AB) included the Program Director, the Conference Director, and several industry representatives. The Board assembled the technical program. Donna Banks of the GMIC coordinated the events and provided support. Due to world-wide COVID-19 pandemic, the conference was a virtual event. It started with a full-day plenary session followed by technical sessions.
Download or read book 80th Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2021-01-27 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 80th Glass Problem Conference (GPC) was organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The GPC Advisory Board (AB) included the Program Director, the Conference Director, and several industry representatives. The Board assembled the technical program. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four technical sessions were as follows: Melting and Combustion Uyi Iyoha, Praxair, Inc., Peachtree City, GA, Jan Schep, Owens-Illinois, Inc., Perrysburg, OH, and Justin Wang, Guardian Industries, Auburn Hills, MI Batch, Environmental, and Modeling Phil Tucker, Johns Manville, Littleton, CO and Chris Tournour, Corning Inc., Corning, NY Refractories Larry McCloskey, Anchor Acquisition, LLC, Lancaster, OH and Eric Dirlam, Ardagh Group, Muncie, IN Sensors and Control Adam Polycn, Vitro Architectural Glass, Cheswick, PA and Glenn Neff, Glass Service USA, Inc., Stuart, FL
Download or read book 74th Conference on Glass Problems Volume 35 Issue 1 written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2014-05-05 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Engineering and Science Proceedings Volume 35, Issue 1, 74th Conference on Glass Problems S.K. Sundaram, Editor In continuing the tradition that dates back to 1934, this volume is a collection of 25 papers presented at the 74th Glass Problems Conference, October 14–17, 2013 in Columbus, Ohio. These papers are essential reading for all who need to stay abreast of the latest research in the glass manufacturing field. Content is grouped into the below five sections: Batching and Forming Glass Melting Modeling, Sensing and Control Refractories I Refractories II
Download or read book 79th Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains a collection of 21 papers presented at the 79th Conference on Glass Problems held November 4-8, 2018 in Columbus, Ohio. Papers touch on topics critical to glass manufacturers including melting and combustion; refractories; forming; and environmental issues.
Download or read book 72nd Conference on Glass Problems written by Charles H. Drummond, III and published by John Wiley & Sons. This book was released on 2012-06-27 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains a collection of papers presented at the 72nd Conference on Glass Problems at The Ohio State University, Columbus, Ohio. Topics covered include glass melting; refractories; process control; legislation safety, and emissions; recycling and batch wetting.
Download or read book 65th Conference on Glass Problems written by Charles H. Drummond, III and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceeding includes 18 papers.
Download or read book 71st Conference on Glass Problems written by Charles H. Drummond, III and published by John Wiley & Sons. This book was released on 2011-06-07 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains a collection of papers presented at the 71st Conference on Glass Problems, October 19-20, 2010 at The Ohio State University, Columbus, Ohio. Topics include glass melting; glass science, defects; safety; refractories; recycling; controls; and raw materials.
Download or read book 61st Conference on Glass Problems written by Charles H Drummond and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 76th Conference on Glass Problems written by S. K. Sundaram and published by . This book was released on 2016 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 65th Conference on Glass Problems written by and published by . This book was released on 2005 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 69th Conference on Glass Problems Volume 30 Issue 1 written by Charles H. Drummond, III and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stay up-to-date with this collection of papers presented at the 69th Conference on Glass Problems at The Ohio State University. Topics include melting and molding, refractories, and environmental issues and new products.
Download or read book 73rd Conference on Glass Problems written by S. K. Sundaram and published by Wiley-American Ceramic Society. This book was released on 2013-04-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 73rd Glass Problem Conference is organized according to the following themes: Glass Melting, Melting, Raw Materials, Batching, and Recycling, Coatings, Strengthening, and Other Topics, Refractories, and Process Control & Modeling
