Download or read book 4th Symposium on Theory and Practice of Robots and Manipulators written by Adam Morecki and published by . This book was released on 1983 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances on Theory and Practice of Robots and Manipulators written by Marco Ceccarelli and published by Springer. This book was released on 2014-06-02 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains papers that have been selected after review for oral presentation at ROMANSY 2014, the 20th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators. These papers cover advances on several aspects of the wide field of Robotics as concerning Theory and Practice of Robots and Manipulators. ROMANSY 2014 is the twentieth event in a series that started in 1973 as one of the first conference activities in the world on Robotics. The first event was held at CISM (International Centre for Mechanical Science) in Udine, Italy on 5-8 September 1973. It was also the first topic conference of IFToMM (International Federation for the Promotion of Mechanism and Machine Science) and it was directed not only to the IFToMM community. Proceedings volumes of ROMANSY have been always published to be available, also after the symposium, to a large public of scholars and designers with the aim to give an overview of new advances and trends in the theory, design and practice of robots. This proceedings volume, like previous ones of the series, contains contributions with achievements covering many fields of Robotics as Theory and Practice of Robots and Manipulators that can be an inspiration for future developments.
Download or read book Theory and Practice of Robots and Manipulators written by A. Morecki and published by Springer. This book was released on 2014-05-04 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CISM-IFToMM Symposia have played a dynamic role in the development of the theory and practice of robotics. The proceedings of the Tenth Symposia present a world view to date of the state-of-the-art, including a unique record of the results achieved in central and eastern Europe.
Download or read book On Theory and Practice of Robots and Manipulators written by Paolo Serafini and published by Springer. This book was released on 2014-05-04 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of Prosthetics Research written by and published by . This book was released on 1979 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Intelligence written by A. Gomersall and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1981 Robotics Bibliography was published containing over 1,800 references on industrial robot research and development, culled from the scientific literature over the previous 12 years. It was felt that sensors for use with industrial robots merited a section and accordingly just over 200 papers were included. It is a sign of the increased research into sensors in production engineering that this bibliography on both the contact and non-contact forms has appeared less than three years after that first comprehensive collection of references appeared. In a reviell''; in 1975 Professor Warnecke of IPA, Stuttgart drew attention to the lack of sensors for touch and vision. Since then research workers in various companies, universities and national laboratories in the USA, the UK, Italy, Germany and Japan have concentrated on improving sensor capabilities, particularly utilising vision, artificial intelligence and pattern recognition principles. As a result many research projects are on the brink of commercial exploitation and development. This biblio graphy brings together the documentation on that research and development, highlighting the advances made in vision systems, but not neglecting the development of tactile sensors of various types. No bibliography can ever be comprehensive, but significant contributions from research workers and production engineers from the major industrialised countries over the last 12 years have been included.
Download or read book Advanced Robotics 1989 written by Kenneth J. Waldron and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Conference on Advanced Robotics was held in Columbus, Ohio, U. S. A. on June 13th to 15th, 1989. The first two conferences in this series were held in Tokyo. The third was held in Versailles, France in October 1987. The International Conference on Advanced Robotics is affiliated with the International Federation of Robotics. This conference was sponsored by The Ohio State University. The American Society of Mechanical Engineers was a cooperating co-sponsor. The objective of the International Conference on Advanced Robotics is to provide an international exchange of information on the topic of advanced robotics. This was adopted as one of the themes for international research cooperation at a meeting of representatives of seven industrialized countries held in Williamsburg, U. S. A. in May 1983. The present conference is truly international in character with contributions from authors of twelve countries. (Bulgaria, Canada, France, Great Britain, India, Italy, Japan, Peoples Republic of China, Poland, Republic of China, Spain, United States of America.) The subject matter of the papers is equally diverse, covering most technical areas of robotics. The authors are distinguished. They are leaders in the field in their respective countries. The International Conference on Advanced Robotics has always particularly encouraged papers oriented to the design of robotic systems, or to research directed at advanced applications in service robotics, construction, nuclear power, agriculture, mining, underwater systems, and space systems.
Download or read book Performance and Computer Aided Design written by Alain. Liegeois and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: What are the design or selection criteria for robots that will be capable of carrying out particular functions? How can robots and machines be installed in work locations to obtain maximum effectiveness? How can their programming be made easier? How can a work location be arranged so as to accommodate successfully automatic machines? Traditionally, these questions have only been answered as a result of long and exhaustive study, involving complex calculations and the use of many sketches and plans. Computers and interactive computer graphics provide the possibility of automation for this type of analysis, thus making the task of robot designers and users easier. This volume is concerned with mathematical modelling and graphics representation of robot performance (eg their fields of action, their performance index) as a function of their structure, mechanical parts and memory systems. Used in conjunction with operating specifications, such as movement programs and computer-aided design (CAD) data bases that describe parts or tools, these perform ance models can allow the potential of different robots or different models of the same type of robot to be compared, workstations to be organized efficiently, responses to be optimized, errors to be minimized and can make off-line programming by computer a real possibility. In the future, it is certain that the appearance of robots designed to monitor their own performances will allow applications and safety conditions to be considerably improved.
Download or read book Machines that Walk written by Shin-Min Song and published by MIT Press. This book was released on 1989 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is 16 feet long, 10 feet high, weighs 6,000 pounds, has six legs, and can sprint at 8 mph and step over a 4 foot wall? The Adaptive Suspension Vehicle (ASV) described in this book. Machines That Walk provides the first in depth treatment of the "statically stable walking machine" theory employed in the design of the ASV, the most sophisticated, self contained, and practical walking machine being developed today. Under construction at Ohio State University, the automatically terrain adaptive ASV has one human operator, can carry a 500 pound payload and is expected to have better fuel economy and mobility than that of conventional wheeled and tracked vehicles in rough terrain. The development of the ASV is a milestone in robotics research, and Machines That Walk provides a wealth of research results in mobility, gait, static stability, leg design, and vertical geometry design. The authors' treatment of statically stable gait theory and actuator coordination is by far the most complete available. Shin Min Song is an Assistant Professor in the Department of Mechanical Engineering at the University of Illinois at Chicago. Kenneth J. Waldron is Nordholt Professor in the Department of Mechanical Engineering at Ohio State University.
Download or read book Advances in Mechanism Design IV written by Jaroslav Beran and published by Springer Nature. This book was released on with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human and Machine Locomotion written by A. Morecki and published by Springer. This book was released on 2014-05-04 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state-of-the-art in both biological and artificial legged locomotion systems. The seven chapters focus on topics ranging from very detailed modelling of the musculo-skeletal system, through mathematical modelling and simulation to theories applicable to locomotion mechanics and control. The final two chapters deal with the mechanics, control and design of artificial legged locomotion systems.
Download or read book Control of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph represents the second book of the series entitled: "SCI ENTIFIC FUNDAl-1ENTALS OF ROBOTICS". While the first volume provides a study of the dynamics of spatial mechanisms and its application to the design of these mechanisms, the present one focuses on the synthesis -of control based~n the knowledge of dynamic models (presented in de tail in the first_ volume). In this way a logical continuity is formed in which one may easily recognize a "dynamic" approach to the design of manipulation r-obots and the synthesis of control algorithms based on exact mathematical models of dynamics of open spatial mechanisms. When writing the monograph, the authors had the following objective: to prove that a study of dynamic properties of manipulation mechanisms is justifiable, to use the dynamic properties in the synthesis of con trol algorithms, and to determine, from one case to another, a proper measure of dynamics depending on the type of manipulation task, the "v$!locity at which "it is carried out, and on the type of the manipu- tion mechanisms itself. The authors believe they have thus made the study of dynamics,' aimed at synthesizing algorithms for dynamic con trol, free from unnecessary academicism and allowed the readers to apply all the results presented here to practical purposes of manipu lator design in thfil broader sense of the word. At this point, the au thors would like to present some concepts which were their guidelines in preparing this text.
Download or read book Bulletin of Prosthetics Research written by and published by . This book was released on 1964 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paper written by and published by . This book was released on 1986 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Handbook of Industrial Automation written by Douglas M. Considine and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors and editors of this Handbook have attempted to fill a serious gap in the professional literature on industrial automation. Much past attention has been directed to the general concepts and philosophy of automation as a way to convince owners and managers of manufacturing facilities that automation is indeed one of the few avenues available to increase productivity and improve competitive position. Seventy-three contributors share their knowledge in this Handbook. Less attention has been given to the "What" and "How" of automation. To the extent feasible and practical within the confines of the pages allowed, this Handbook concentrates on the implementation of automation. Once the "Go" signal has been given by management, concrete details-not broad definitions and philosophical discussions-are required. To be found in this distinctly different book in the field are detailed parameters for designing and specifying equipment, the options available with an evaluation of their relative advantages and limitations, and insights for engineers and production managers on the operation and capabilities of present-generation automation system components, subsystems, and total systems. In a number of instances, the logical extension of current technology into the future is given. A total of 445 diagrams and photos and 57 tables augments detailed discussions. In addition to its use as a ready reference for technical and management personnel, the book has wide potential for training and group discussions at the college and university level and for special education programs as may be provided by consultants or by "in-house" training personnel.
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Non Adaptive and Adaptive Control of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material presented in this monograph is a logical continuation of research results achieved in the control of manipulation robots. This is in a way, a synthesis of many-year research efforts of the associates of Robotics Department, Mihailo Pupin Institute, in the field of dynamic control.of robotic systems. As in Vol. 2 of this Series, all results rely on the mathematical models of dynamics of active spatial mechanisms which offer the possibility for adequate dynamic control of manipula tion robots. Compared with Vol. 2, this monograph has three essential new character istics, and a variety of new tasks arising in the control of robots which have been formulated and solved for the first time. One of these novelties is nonadaptive control synthesized for the case of large variations in payload parameters, under the condition that the practical stability of the overall system is satisfied. Such a case of control synthesis meets the actual today's needs in industrial robot applications. The second characteristic of the monograph is the efficient adaptive control algorithm based on decentralized control structure intended for tasks in which parameter variations cannot be specified in advance. To be objective, this is not the case in industrial robotics today. Thus, nonadaptive control with and without a particular parameter variation is supplemented by adaptive dynamic control algorithms which will cer tainly be applicable in the future industrial practice when parametric identification of workpieces will be required.
