Download or read book Electrical Power Equipment Maintenance and Testing written by Paul Gill and published by CRC Press. This book was released on 2016-12-19 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this definitive text covers all aspects of testing and maintenance of the equipment found in electrical power systems serving industrial, commercial, utility substations, and generating plants. It addresses practical aspects of routing testing and maintenance and presents both the methodologies and engineering basics needed to carry out these tasks. It is an essential reference for engineers and technicians responsible for the operation, maintenance, and testing of power system equipment. Comprehensive coverage includes dielectric theory, dissolved gas analysis, cable fault locating, ground resistance measurements, and power factor, dissipation factor, DC, breaker, and relay testing methods.
Download or read book Electromagnetic Shielding written by Salvatore Celozzi and published by John Wiley & Sons. This book was released on 2008-05-16 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference on electromagnetic shielding materials, configurations, approaches, and analyses This reference provides a comprehensive survey of options for the reduction of the electromagnetic field levels in prescribed areas. After an introduction and an overview of available materials, it discusses figures of merit for shielding configurations, the shielding effectiveness of stratified media, numerical methods for shielding analyses, apertures in planar metal screens, enclosures, and cable shielding. Up to date and comprehensive, Electromagnetic Shielding: Explores new and innovative techniques in electromagnetic shielding Presents a critical approach to electromagnetic shielding that highlights the limits of formulations based on plane-wave sources Analyzes aspects not normally considered in electromagnetic shielding, such as the effects of the content of the shielding enclosures Includes references at the end of each chapter to facilitate further study The last three chapters discuss frequency-selective shielding, shielding design procedures, and uncommon ways of shielding—areas ripe for further research. This is an authoritative, hands-on resource for practicing telecommunications and electrical engineers, as well as researchers in industry and academia who are involved in the design and analysis of electromagnetic shielding structures.
Download or read book Submarine Power Cables written by Thomas Worzyk and published by Springer Science & Business Media. This book was released on 2009-08-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for high-performance submarine power cables is increasing as more and more offshore wind parks are installed, and the national electric grids are interconnected. Submarine power cables are installed for the highest voltages and power to transport electric energy under the sea between islands, countries and even continents. The installation and operation of submarine power cables is much different from land cables. Still, in most textbooks on electrical power systems, information on submarine cables is scarce. This book is closing the gap. Different species of submarine power cables and their application are explained. Students and electric engineers learn on the electric and mechanic properties of submarine cables. Project developers and utility managers will gain useful information on the necessary marine activities such as pre-laying survey, cable lay vessels, guard boats etc., for the submarine cable installation and repair. Investors and decision makers will find an overview on environmental aspects of submarine power cables. A comprehensive reference list is given for those who want further reading.
Download or read book High Voltage Engineering Fundamentals written by John Kuffel and published by Elsevier. This book was released on 2000-07-17 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power transfer for large systems depends on high system voltages. The basics of high voltage laboratory techniques and phenomena, together with the principles governing the design of high voltage insulation, are covered in this book for students, utility engineers, designers and operators of high voltage equipment. In this new edition the text has been entirely revised to reflect current practice. Major changes include coverage of the latest instrumentation, the use of electronegative gases such as sulfur hexafluoride, modern diagnostic techniques, and high voltage testing procedures with statistical approaches. - A classic text on high voltage engineering - Entirely revised to bring you up-to-date with current practice - Benefit from expanded sections on testing and diagnostic techniques
Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.
Download or read book Data Analytics and Applications of the Wearable Sensors in Healthcare written by Shabbir Syed-Abdul and published by MDPI. This book was released on 2020-06-17 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a collection of comprehensive research articles on data analytics and applications of wearable devices in healthcare. This Special Issue presents 28 research studies from 137 authors representing 37 institutions from 19 countries. To facilitate the understanding of the research articles, we have organized the book to show various aspects covered in this field, such as eHealth, technology-integrated research, prediction models, rehabilitation studies, prototype systems, community health studies, ergonomics design systems, technology acceptance model evaluation studies, telemonitoring systems, warning systems, application of sensors in sports studies, clinical systems, feasibility studies, geographical location based systems, tracking systems, observational studies, risk assessment studies, human activity recognition systems, impact measurement systems, and a systematic review. We would like to take this opportunity to invite high quality research articles for our next Special Issue entitled “Digital Health and Smart Sensors for Better Management of Cancer and Chronic Diseases” as a part of Sensors journal.
Download or read book A Text Book of Medical Instruments written by S. Ananthi and published by New Age International. This book was released on 2006 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: This book has therefore subdivided the realm of medical instruments into the same sections like a text on physiology and introduces the basic early day methods well, before dealing with the details of present day instruments currently in
Download or read book Automotive Electromagnetic Compatibility EMC written by Terence Rybak and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone who has operated, serviced, or designed an automobile or truck in the last few years has most certainly noticed that the age of electronics in our vehicles is here! Electronic components and systems are used for everything from the traditional entertainment system to the latest in “drive by wire”, to two-way communication and navigation. The interesting fact is that the automotive industry has been based upon mechanical and materials engineering for much of its history without many of the techniques of electrical and electronic engineering. The emissions controls requirements of the 1970’s are generally recognized as the time when electronics started to make their way into the previous mechanically based systems and functions. While this revolution was going on, the electronics industry developed issues and concepts that were addressed to allow interoperation of the systems in the presence of each other and with the external environment. This included the study of electromagnetic compatibility, as systems and components started to have influence upon each other just due to their operation. EMC developed over the years, and has become a specialized area of engineering applicable to any area of systems that included electronics. Many well-understood aspects of EMC have been developed, just as many aspects of automotive systems have been developed. We are now at a point where the issues of EMC are becoming more and more integrated into the automotive industry.
Download or read book Antennas written by Yi Huang and published by John Wiley & Sons. This book was released on 2008-09-15 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical, concise and complete reference for the basics of modern antenna design Antennas: from Theory to Practice discusses the basics of modern antenna design and theory. Developed specifically for engineers and designers who work with radio communications, radar and RF engineering, this book offers practical and hands-on treatment of antenna theory and techniques, and provides its readers the skills to analyse, design and measure various antennas. Key features: Provides thorough coverage on the basics of transmission lines, radio waves and propagation, and antenna analysis and design Discusses industrial standard design software tools, and antenna measurement equipment, facilities and techniques Covers electrically small antennas, mobile antennas, UWB antennas and new materials for antennas Also discusses reconfigurable antennas, RFID antennas, Wide-band and multi-band antennas, radar antennas, and MIMO antennas Design examples of various antennas are provided Written in a practical and concise manner by authors who are experts in antenna design, with experience from both academia and industry This book will be an invaluable resource for engineers and designers working in RF engineering, radar and radio communications, seeking a comprehensive and practical introduction to the basics of antenna design. The book can also be used as a textbook for advanced students entering a profession in this field.
Download or read book China s Strategic Modernization Implications for the United States written by Mark A. Stokes and published by DIANE Publishing. This book was released on with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional wisdom portrays the People's Republic of China (PRC) People's Liberation Army (PLA) as a backward continental force that will not pose a military challenge to its neighbors or to the United States well into the 21st century. PLA writings that demonstrate interest in exploiting the revolution in military affairs (RMA) are dismissed by a large segment of the PLA- watching community as wistful fantasies. The author offers an alternative perspective by outlining emerging PLA operational concepts and a range of research and development projects that appear to have been heavily influenced by U.S. and Russian writings on the RMA. Fulfillment of the PLA's vision for the 21st century could have significant repercussions for U.S. interests in the Asia-Pacific region.
Download or read book The Magnetotelluric Method written by Alan D. Chave and published by Cambridge University Press. This book was released on 2012-04-26 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: The magnetotelluric method is a technique for imaging the electrical conductivity and structure of the Earth, from the near surface down to the 410 km transition zone and beyond. This book forms the first comprehensive overview of magnetotellurics, from the salient physics and its mathematical representation to practical implementation in the field, data processing, modeling and geological interpretation. Electromagnetic induction in 1-D, 2-D and 3-D media is explored, building from first principles, and with thorough coverage of the practical techniques of time series processing, distortion, numerical modeling and inversion. The fundamental principles are illustrated with a series of case histories describing geological applications. Technical issues, instrumentation and field practices are described for both land and marine surveys. This book provides a rigorous introduction to magnetotellurics for academic researchers and advanced students, and will be of interest to industrial practitioners and geoscientists wanting to incorporate rock conductivity into their interpretations.
Download or read book Design and Development of Medical Electronic Instrumentation written by David Prutchi and published by John Wiley & Sons. This book was released on 2005-01-28 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Development of Medical Electronic Instrumentation fills a gap in the existing medical electronic devices literature by providing background and examples of how medical instrumentation is actually designed and tested. The book includes practical examples and projects, including working schematics, ranging in difficulty from simple biopotential amplifiers to computer-controlled defibrillators. Covering every stage of the development process, the book provides complete coverage of the practical aspects of amplifying, processing, simulating and evoking biopotentials. In addition, two chapters address the issue of safety in the development of electronic medical devices, and providing valuable insider advice.
Download or read book Wireless Networking Technology written by Steve A. Rackley and published by Elsevier. This book was released on 2011-02-23 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demand for higher bandwidth has lead to the development of increasingly complex wireless technologies, an understanding of both wireless networking technologies and radio frequency (RF) principles is essential for implementing high performance and cost effective wireless networks.Wireless Networking Technology clearly explains the latest wireless technologies, covering all scales of wireless networking from personal (PAN) through local area (LAN) to metropolitan (MAN). Building on a comprehensive review of the underlying technologies, this practical guide contains 'how to' implementation information, including a case study that looks at the specific requirements for a voice over wireless LAN application. This invaluable resource will give engineers and managers all the necessary knowledge to design, implement and operate high performance wireless networks.· Explore in detail wireless networking technologies and understand the concepts behind RF propagation.· Gain the knowledge and skills required to install, use and troubleshoot wireless networks.· Learn how to address the problems involved in implementing a wireless network, including the impact of signal propagation on operating range, equipment inter-operability problems and many more.· Maximise the efficiency and security of your wireless network.
Download or read book Lightning written by Chandima Gomes and published by Springer Nature. This book was released on 2021-08-13 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the essential theoretical and practical aspects of lightning, lightning protection, safety and education. Additionally, several auxiliary topics that are required to understand the core themes are also included. The main objective of the contents is to enlighten the scientists, researchers, engineers and social activists (including policy makers) in developing countries regarding the key information related to lightning and thunderstorms. A majority of developing countries are in tropics where the lightning characteristics are somewhat different from those in temperate regions. The housing structures and power/communication networks, and human behavioural patterns(that depends on socio-economic parameters) in these countries are also different from those in the developed world. As the existing books on similar themes address only those scenarios in developed countries, this book serves a vast spectrum of readership in developing world who seek knowledge in the principles of lightning and a practical guidance on lightning protection and safety education.
Download or read book Mobile Communications written by Schiller and published by Pearson Education India. This book was released on 2008-09 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PC Hardware A Beginner s Guide written by Ron Gilster and published by McGraw Hill Professional. This book was released on 2001-05-17 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for PC owners looking for an accessible, easy-to-follow reference, this beginner's guide to PC hardware offers expert advice on every component--processors, motherboards, memory, BIOS, CD-ROM and DVD drives, video cards, and much more. You'll also get details on external devices, including monitors, printers, keyboards, and modems. The book covers both Intel and non-Intel CPUs and USB and AGP ports.
Download or read book Introduction to Radar Systems written by Merrill I. Skolnik and published by . This book was released on 1988 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt:
