Download or read book 3G Handset and Network Design written by Geoff Varrall and published by John Wiley & Sons. This book was released on 2003-03-11 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third Generation (3G) wireless networks are in the works in Europe and Asia, and 2.5G networks that incorporate some 3G features are being rolled out in the United States Hands-on guide to integrating cell phone or PDA/portable PC products with present and future wireless network hardware Addresses topics such as quality of service (QoS) and service level agreements (SLAs) from a wireless perspective Presents an in-depth review of both handset and network hardware and software
Download or read book 3g Handset Network Design written by Varrall and published by John Wiley & Sons. This book was released on with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Mobile Network Engineering GSM 3G WCDMA LTE and the Road to 5G written by Alexander Kukushkin and published by John Wiley & Sons. This book was released on 2018-09-04 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes and surveys current LTE technical specifications and implementation options for engineers and newly qualified support staff Concentrating on three mobile communication technologies, GSM, 3G-WCDMA, and LTE—while majorly focusing on Radio Access Network (RAN) technology—this book describes principles of mobile radio technologies that are used in mobile phones and service providers’ infrastructure supporting their operation. It introduces some basic concepts of mobile network engineering used in design and rollout of the mobile network. It then follows up with principles, design constraints, and more advanced insights into radio interface protocol stack, operation, and dimensioning for three major mobile network technologies: Global System Mobile (GSM) and third (3G) and fourth generation (4G) mobile technologies. The concluding sections of the book are concerned with further developments toward next generation of mobile network (5G). Those include some of the major features of 5G such as a New Radio, NG-RAN distributed architecture, and network slicing. The last section describes some key concepts that may bring significant enhancements in future technology and services experienced by customers. Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G covers the types of Mobile Network by Multiple Access Scheme; the cellular system; radio propagation; mobile radio channel; radio network planning; EGPRS - GPRS/EDGE; Third Generation Network (3G), UMTS; High Speed Packet data access (HSPA); 4G-Long Term Evolution (LTE) system; LTE-A; and Release 15 for 5G. Focuses on Radio Access Network technologies which empower communications in current and emerging mobile network systems Presents a mix of introductory and advanced reading, with a generalist view on current mobile network technologies Written at a level that enables readers to understand principles of radio network deployment and operation Based on the author’s post-graduate lecture course on Wireless Engineering Fully illustrated with tables, figures, photographs, working examples with problems and solutions, and section summaries highlighting the key features of each technology described Written as a modified and expanded set of lectures on wireless engineering taught by the author, Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G is an ideal text for post-graduate and graduate students studying wireless engineering, and industry professionals requiring an introduction or refresher to existing technologies.
Download or read book IP Design for Mobile Networks written by Mark Grayson and published by Pearson Education. This book was released on 2009-06-11 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the cellular world and the Internet converge, mobile networks are transitioning from circuit to packet and the Internet Protocol (IP) is now recognized as the fundamental building block for all next-generation communication networks. The all-IP vision provides the flexibility to deliver cost-effective services and applications that meet the evolving needs of mobile users. RF engineers, mobile network designers, and system architects will be expected to have an understanding of IP fundamentals and how their role in delivering the end-to-end system is crucial for delivering the all-IP vision that makes the Internet accessible anytime, anywhere. IP Design for Mobile Networks discusses proper IP design theory to effectively plan and implement your next-generation mobile network so that IP integrates all aspects of the network. The book outlines, from both a standards and a design theory perspective, both the current and target state of mobile networks, and the technology enablers that will assist the migration. This IP transition begins with function-specific migrations of specific network domains and ends with an end-to-end IP network for radio, transport, and service delivery. The book introduces many concepts to give you exposure to the key technology trends and decision points affecting today’s mobile operators. The book is divided into three parts: Part I provides an overview of how IP is being integrated into mobile systems, including radio systems and cellular networks. Part II provides an overview of IP, the technologies used for transport and connectivity of today’s cellular networks, and how the mobile core is evolving to encompass IP technologies. Part III provides an overview of the end-to-end services network based on IP, including context awareness and services. Presents an overview of what mobile networks look like today–including protocols used, transport technologies, and how IP is being used for specific functions in mobile networks Provides an all-inclusive reference manual for IP design theory as related to the broader application of IP for mobile networks Imparts a view of upcoming trends in mobility standards to better prepare a network evolution plan for IP-based mobile networks This book is part of the Networking Technology Series from Cisco Press®, which offers networking professionals valuable information for constructing efficient networks, understanding new technologies, and building successful careers. ciscopress.com
Download or read book Evolution of 3G Networks written by Gottfried Punz and published by Springer Science & Business Media. This book was released on 2009-12-16 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this chapter we describe the motivation for writing this book and explain its scope. Some remarks on nomenclature are given in order to help the reader with a fast and easy start. The concept and structure of the material compiled is p- sented, followed by some hints on how to make best use of it. Finally the status of standardization, on which this book is based, is described. 1. 1 Motivation Probably the main motivation for starting to draft the script for this book, and eventually to finish it, was the desire to have a more or less complete, up-to-date overview of mobile network technology for myself, not only when starting my work in 3GPP standardization, but also continuously afterwards. I realized that some of my colleagues were in search of the same, and I extrapolated to the point where, after 3G technology is in in the field for some time, the huge, new step of development would be implemented and finally exist in reality: a manifold of s- tem designers, SW engineers, solution consultants, test personnel, field tech- cians and service staff would have to deal with the underlying architecture, c- cepts and detailed procedures. Yet, I noticed in my roughly two decades of work as a engineer (in a few diverse fields) that compact, consistent, and balanced ov- view material, suitable for the wider audience is scarce.
Download or read book Fundamentals of Cellular Network Planning and Optimisation written by Ajay R. Mishra and published by John Wiley & Sons. This book was released on 2004-05-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: “By 2008, some 2 billion people will be using mobile phones and devices, in many cases to access advanced data services. Against this backdrop, the need for efficient and effective network design will be critical to the success of increasingly complex mobile networks.” Simon Beresford-Wylie (SVP, Nokia Networks) With the complexity of the cellular networks increasing day by day, a deeper understanding of the design and performance of end-to-end cellular networks is required. Moreover, all the types of networks from 2G-2.5G-3G seem to co-exist. Fundamentals of Cellular Network Planning and Optimisation covers end-to-end network planning and optimisation aspects from second generation GSM to third generation WCDMA networks including GPRS and EDGE networks. All the sub-systems of the network i.e. radio network, transmission network and core network have been covered with focus on both practical and theoretical issues. By bringing all these concepts under one cover, this book becomes essential reading for the network design engineers working either with cellular service vendors or operators, experts/scientists working on end-to-end issues and undergraduate/post-graduate students. Key Highlights: Distinctly divided into four parts: 2G (GSM), 2.5G (GPRS & EDGE), 3G (WCDMA) and introduction to 4G (OFDM, ALL-IP, WLAN Overview) respectively Each part focuses on the radio, transmission and core networks. Concentrates on cellular network planning process and explains the underlying principles behind the planning and optimizing of the cellular networks. The text will serve as a handbook for anyone engaged in the study, design, deployment and business of cellular networks.
Download or read book IP for 3G written by Dave Wisely and published by John Wiley & Sons. This book was released on 2003-04-11 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is an 'all-IP' network? What difference will IP networking make to 3G services? Third Generation (3G) mobile offers access to broadband multimedia services - and in the future most of these, even voice and video, will be IP-based. However 3G networks are not based on IP technologies, rather they are an evolution from existing 2G networks. Much work needs to be done to IP QoS and mobility protocols and architectures for them to be able to provide the functionality 3G requires. IP for 3G gives a comprehensive overview of 3G networking functionality and examines how IP protocols can be developed to provide some of the basic building blocks of a mobile system (mobility, QoS and call control) Features: * Clear explanation of how 3G works at the network level. * Review of IP protocol and architectural principles. * Extensive review, classification and analysis of IP mobility protocols - macro and micro- including IPv6. * Analysis of IP QoS protocols and proposed solutions for mobile networks. * Tutorial on SIP (Session Initiation Protocol) and how SIP can be used for multimedia session control. * Description of latest UMTS developments - including Release 5. * Discussion of 4G networks - what does 4G mean? IP for 3G will appeal to mobile telecommunications and network engineers who want to know about future developments as well as system designers and developers. Students and academics on postgraduate courses related to telecommunications, especially 3G networking or IP protocols, will find this text ideal supplementary reading, only assuming a general knowledge of GSM and general networking principles.
Download or read book UMTS Network Planning Optimization and Inter Operation with GSM written by Moe Rahnema and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: UMTS Network Planning, Optimization, and Inter-Operation with GSM is an accessible, one-stop reference to help engineers effectively reduce the time and costs involved in UMTS deployment and optimization. Rahnema includes detailed coverage from both a theoretical and practical perspective on the planning and optimization aspects of UMTS, and a number of other new techniques to help operators get the most out of their networks. Provides an end-to-end perspective, from network design to optimization Incorporates the hands-on experiences of numerous researchers Single authorship allows for strong coherency and accessibility Details the complete iteration cycle of radio link budgeting for coverage planning and dimensioning Rahnema demonstrates detailed formulation of radio capacity and coverage in UMTS, and discusses the tradeoffs involved. He presents complete link budgeting and iterative simulations for capacity and coverage planning, along with practical guidelines. UMTS Network Planning contains seventeen cohesive and well-organized chapters which cover numerous topics, including: Radio channel structures, radio channel models, parameters, model tuning Techniques for capacity and coverage enhancements Complete treatment of power control, handoffs and radio resource practical management processes and parameters Detailed coverage of TCP protocol enhancement for operation over wireless links, particularly UMTS Application of GSM measurements to plan and re-engineer for UMTS radio sites Guidelines for site co-location with GSM, the QOS classes, parameters and inter-workings in UMTS AMR voice codecs and tradeoffs, core and access network design, architectural evolution, and protocols Comprehensive discussion and presentation of practical techniques for radio performance analysis, trending, and troubleshooting Perfect for professionals in the field and researchers specializing in network enhancement. Engineers working on other air interfaces and next generation technologies will find many of the techniques introduced helpful in designing and deploying future wireless networks as well. Students and professionals new to the wireless field will also find this book to be a good foundation in network planning, performance analysis, and optimization.
Download or read book Fundamentals of Network Planning and Optimisation 2G 3G 4G written by Ajay R. Mishra and published by John Wiley & Sons. This book was released on 2018-07-27 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated new edition covering all aspects of network planning and optimization This welcome new edition provides comprehensive coverage of all aspects of network planning in all the technologies, from 2G to 5G, in radio, transmission and core aspects. Written by leading experts in the field, it serves as a handbook for anyone engaged in the study, design, deployment and business of cellular networks. It increases basic understanding of the currently deployed, and emerging, technologies, and helps to make evolution plans for future networks. The book also provides an overview of the forthcoming technologies that are expected to make an impact in the future, such as 5G. Fundamentals of Cellular Network Planning and Optimization, Second Edition encompasses all the technologies as well as the planning and implementation details that go with them. It covers 2G (GSM, EGPRS), 3G (WCDMA) and 4G (LTE) networks and introduces 5G. The book also looks at all the sub-systems of the network, focusing on both the practical and theoretical issues. Provides comprehensive coverage of the planning aspects of the full range of today's mobile network systems, covering radio access network, circuit and packet switching, signaling, control, and backhaul/Core transmission networks New elements in book include HSPA, Ethernet, 4G/LTE and 5G Covers areas such as Virtualization, IoT, Artificial Intelligence, Spectrum Management and Cloud By bringing all these concepts under one cover, Fundamentals of Cellular Network Planning and Optimization becomes essential reading for network design engineers working with cellular service vendors or operators, experts/scientists working on end-to-end issues, and undergraduate/post-graduate students.
Download or read book 3G Mobile Networks written by Sumit Kasera and published by McGraw-Hill Professional Publishing. This book was released on 2005 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a detailed deconstruction and explanation of the UMTS 3G mobile communications protocol and the networks that run it.
Download or read book W CDMA and cdma2000 for 3G Mobile Networks written by M. R. . Karim and published by McGraw Hill Professional. This book was released on 2002-04-22 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: AS SERVICE PROVIDERS START TO BUILD THIRD-GENERATION AND UMTS NETWORKS, THEY NEED A WIZARD TO MAKE SENSE OF ELABORATE PROTOCOLS AND OUT-OF-CONTEXT TECHNOLOGY REPORTS "Excellent coverage: captures the gamut from propagation science to network planning." -- Nikil Jayant, John Pippin Chair in Wireless Systems, Georgia Tech "For those already installing 3G systems, I recommend it be rushed into print." -- Reed Fisher, formerly of Bell Labs and father of the cell phone "Engineers will find this is a much-needed integrated approach to understanding 3G technologies." -- Ken Smolik, Technology Specialist, Banner & Witcoff, Ltd. This book gives network managers and 3G workers a select background in spread spectrum technology, empowering them to make real-world design, purchasing, and deployment decisions. Assuming only that W-CDMA is the preferred interface, the authors make a point of grounding 3G technologies in the fundamentals of propagation characteristics, physical layer functionalities, and spectrum requirements, so readers can confidently tackle soft handover, power control, sectorization, and message flows. Written by authors with deep experience in data communications design and development, this jargon-free look at W-CDMA: * Spells out what providers must know to enable wireless data speeds 40 times the current level * Shows how to integrate U.S., European, and Pacific Rim flavors of 3G for worldwide roaming access * Explains how spread spectrum functions best in data transmission * Covers vital links between GSM and W-CDMA systems * Reviews and unpacks IMT-2000 interface proposals Worth its weight in paid consultants to wireless carriers, service developers, systems engineers, and telecom managers, this book opens a window on the implications of the air interface in the next-generation network.
Download or read book Successful Service Design for Telecommunications written by Sauming Pang and published by John Wiley & Sons. This book was released on 2009-01-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive reference to successful service design for the telecommunications industry Telecommunications companies operate in increasingly competitive environments. The companies that survive and excel are those offering the most compelling range of products and services. These services are complex since they touch all aspects of business. Service design and implementation skills are therefore the key for staying on top of the competition. Successful Service Design for Telecommunications provides a comprehensive guide into service design and implementation. The author provides a consistent approach to designing scalable and operable processes that can be used when designing a variety of technologically based services; offering concepts, principles and numerous examples that the readers can easily adapt to their technological environment. Key features: Defines what telecommunications services are from business, technical and operational perspectives Explains how telecommunications services can be implemented, including implementation strategies for both new service introductions and enhancements to existing services The principles and management processes described can be used on all telecommunications services (fixed, mobile, broadband and wireless) and technology (e.g. IT and Internet) based services Includes references to the current best practices and industry standards and complements the eTom and the OSS/ BSS models proposed by the TeleManagement Forum Features numerous real-life scenarios and examples to support the discussion on the key concepts of service design This book will be of interest to managers, service designers, project managers, IT professionals, operation managers and senior executives who work in the telecommunications sector. University students studying telecommunications, IT and service science courses will also find this text insightful.
Download or read book Mobile Handset Design written by Sajal Kumar Das and published by John Wiley & Sons. This book was released on 2013-05-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of mobile communication standards presents numerouschallenges in mobile handset design. Designers must continue toturn out handsets that maintain high device performance and airinterface compatibility, while at the same time shrink powerconsumption, form factors, and costs. Mobile Handset Design is uniquely written to equipprofessionals and students with a complete understanding of how amobile phone works, and teaches the skills to design the latestmobile handsets. Das walks readers through mobile phone operatingprinciples, system infrastructure, TDMA-FDMA-CDMA-OFDMA techniques,hardware anatomy, software and protocols, and internal modules,components, and circuits. He presents all problems associated withmobile wireless channels and recommends corresponding designsolutions to overcome those issues. Mobile RF front-end, digitalbaseband design techniques, and associated trade-offs are alsocovered. Das also discusses the productization aspects and reviewsnew research developments for different mobile phone systems overgenerations. Teaches basic working principles of legacy and 4G mobilesystems Vividly illustrates and explains all key components and theanatomy of mobile phones Explains all hardware and software blocks, from principle topractice to product Discusses key design attributes such as low power consumptionand slim form factors Moves through all topics in a systematic fashion for easycomprehension Presentation files with lecture notes available for instructoruse This book is essential for practicing software, hardware and RFdesign engineers and product managers working to create innovate,competitive handsets. Mobile Handset Design is also idealfor fresh graduates or experienced engineers who are new to themobile industry, and is well-suited for industry veterans as ahandy reference. Lecture materials for instructors available at ahref="http://www.wiley.com/go/dasmobile"www.wiley.com/go/dasmobile/a
Download or read book Advanced Cellular Network Planning and Optimisation written by Ajay R. Mishra and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: A highly practical guide rooted in theory to include the necessary background for taking the reader through the planning, implementation and management stages for each type of cellular network. Present day cellular networks are a mixture of the technologies like GSM, EGPRS and WCDMA. They even contain features of the technologies that will lead us to the fourth generation networks. Designing and optimising these complex networks requires much deeper understanding. Advanced Cellular Network Planning and Optimisation presents radio, transmission and core network planning and optimisation aspects for GSM, EGPRS and WCDMA networks with focus on practical aspects of the field. Experts from each of the domains have brought their experiences under one book making it an essential read for design practitioners, experts, scientists and students working in the cellular industry. Key Highlights Focus on radio, transmission and core network planning and optimisation Covers GSM, EGPRS, WCDMA network planning & optimisation Gives an introduction to the networks/technologies beyond WCDMA, and explores its current status and future potential Examines the full range of potential scenarios and problems faced by those who design cellular networks and provides advice and solutions all backed up with real-world examples This text will serve as a handbook to anyone engaged in the design, deployment, performance and business of Cellular Networks. "Efficient planning and optimization of mobile networks are key to guarantee superior quality of service and user experience. They also form the essential foundation for the success of future technology development, making this book a valuable read on the road towards 4G." —Tero Ojanperä, Chief Technology Officer, Nokia Networks
Download or read book High Performance Data Network Design written by Tony Kenyon and published by Digital Press. This book was released on 2002-01-22 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Performance Data Network Design contains comprehensive coverage of network design, performance, and availability. Tony Kenyon provides the tools to solve medium- to large-scale data network design problems from the ground up. He lays out a practical and systematic approach that integrates network planning, research, design, and deployment, using state-of-the-art techniques in performance analysis, cost analysis, simulation, and topology modeling. The proliferation and complexity of data networks today is challenging our ability to design and manage them effectively. A new generation of Internet, e-commerce, and multimedia applications has changed traditional assumptions on traffic dynamics, and demands tight quality of service and security guarantees. These issues, combined with the economics of moving large traffic volumes across international backbones, mean that the demands placed on network designers, planners, and managers are now greater than ever before. High-Performance Data Network Design is a "must have" for anyone seriously involved in designing data networks. Together with the companion volume, Data Networks: Routing, Security, and Performance Optimization, this book gives readers the guidance they need to plan, implement, and optimize their enterprise infrastructure. · Provides real insight into the entire design process · Includes basic principles, practical advice, and examples of design for industrial-strength enterprise data networks · Integrates topics often overlooked-backbone optimization, bottleneck analysis, simulation tools, and network costing
Download or read book Introduction to Mobile Network Engineering GSM 3G WCDMA LTE and the Road to 5G written by Alexander Kukushkin and published by John Wiley & Sons. This book was released on 2018-07-03 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes and surveys current LTE technical specifications and implementation options for engineers and newly qualified support staff Concentrating on three mobile communication technologies, GSM, 3G-WCDMA, and LTE—while majorly focusing on Radio Access Network (RAN) technology—this book describes principles of mobile radio technologies that are used in mobile phones and service providers’ infrastructure supporting their operation. It introduces some basic concepts of mobile network engineering used in design and rollout of the mobile network. It then follows up with principles, design constraints, and more advanced insights into radio interface protocol stack, operation, and dimensioning for three major mobile network technologies: Global System Mobile (GSM) and third (3G) and fourth generation (4G) mobile technologies. The concluding sections of the book are concerned with further developments toward next generation of mobile network (5G). Those include some of the major features of 5G such as a New Radio, NG-RAN distributed architecture, and network slicing. The last section describes some key concepts that may bring significant enhancements in future technology and services experienced by customers. Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G covers the types of Mobile Network by Multiple Access Scheme; the cellular system; radio propagation; mobile radio channel; radio network planning; EGPRS - GPRS/EDGE; Third Generation Network (3G), UMTS; High Speed Packet data access (HSPA); 4G-Long Term Evolution (LTE) system; LTE-A; and Release 15 for 5G. Focuses on Radio Access Network technologies which empower communications in current and emerging mobile network systems Presents a mix of introductory and advanced reading, with a generalist view on current mobile network technologies Written at a level that enables readers to understand principles of radio network deployment and operation Based on the author’s post-graduate lecture course on Wireless Engineering Fully illustrated with tables, figures, photographs, working examples with problems and solutions, and section summaries highlighting the key features of each technology described Written as a modified and expanded set of lectures on wireless engineering taught by the author, Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G is an ideal text for post-graduate and graduate students studying wireless engineering, and industry professionals requiring an introduction or refresher to existing technologies.
Download or read book Networking Systems Design and Development written by Lee Chao and published by CRC Press. This book was released on 2009-12-21 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effectively integrating theory and hands-on practice, Networking Systems Design and Development provides students and IT professionals with the knowledge and skills needed to design, implement, and manage fully functioning network systems using readily available Linux networking tools. Recognizing that most students are beginners in the field of ne