Download or read book 3D Printing and Ubiquitous Manufacturing written by Tin-Chih Toly Chen and published by Springer Nature. This book was released on 2020-06-18 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of the applications of 3D printing technologies to ubiquitous manufacturing (UM). UM itself represents an application of ubiquitous computing in the manufacturing sector, and this book reveals how it offers convenient, on-demand network access to a shared pool of configurable manufacturing resources, including software tools, equipment, and capabilities. Given its scope, the book will be of considerable interest to researchers in the areas of manufacturing, mechanical engineering, operations management, production control, ubiquitous computing, and sensor technologies, as well as practicing managers and engineers.
Download or read book A New Industrial Future written by Thomas Birtchnell and published by Routledge. This book was released on 2016-07-15 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Industrial Future? examines whether a further industrial revolution is taking place around the world. In this compelling book Birtchnell and Urry examine such a new possible future involving the mass adoption of 3D printing. The locating of 3D printers in homes, offices, stores and workshops would disrupt existing systems and pose novel challenges for incumbents. The book drawing upon expert interviews, scenario workshops and various case studies assesses the potential future of global manufacturing, freight transport, world trade and land use. It offers the first book-length social scientific analysis of the character and impacts of a new system of manufacturing that is in formation. The book will be of interest to urban planners, policy makers, social scientists, futurologists, economists, as well as general readers by offering inquiry on this future upheaval in the means of production.
Download or read book 3D Printing Technology and Its Diverse Applications written by H. B. Muralidhara and published by CRC Press. This book was released on 2021-12-22 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume explores the exciting and diverse applications of three-dimensional printing in a variety of industries, including food processing, environmental sciences, biotechnology, medical devices, energy storage, civil engineering, the textile and fashion industry, and more. It describes the various 3D printing methods, the commonly used materials, and the pros and cons. It also presents an overview of the historical development and modern-day trends in additive manufacturing, as well as an exploration of the prospects of 3D printing technology in promoting academic education.
Download or read book Fabricated written by Hod Lipson and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricated tells the story of 3D printers, humble manufacturing machines that are bursting out of the factory and into schools, kitchens, hospitals, even onto the fashion catwalk. Fabricated describes our emerging world of printable products, where people design and 3D print their own creations as easily as they edit an online document. A 3D printer transforms digital information into a physical object by carrying out instructions from an electronic design file, or 'blueprint.' Guided by a design file, a 3D printer lays down layer after layer of a raw material to 'print' out an object. That's not the whole story, however. The magic happens when you plug a 3D printer into today’s mind-boggling digital technologies. Add to that the Internet, tiny, low cost electronic circuitry, radical advances in materials science and biotech and voila! The result is an explosion of technological and social innovation. Fabricated takes the reader onto a rich and fulfilling journey that explores how 3D printing is poised to impact nearly every part of our lives. Aimed at people who enjoy books on business strategy, popular science and novel technology, Fabricated will provide readers with practical and imaginative insights to the question 'how will this technology change my life?' Based on hundreds of hours of research and dozens of interviews with experts from a broad range of industries, Fabricated offers readers an informative, engaging and fast-paced introduction to 3D printing now and in the future.
Download or read book 3D Printing and Additive Manufacturing Technologies written by L. Jyothish Kumar and published by Springer. This book was released on 2018-06-07 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns. Because of their wide range of applications, 3D printing and additive manufacturing technologies have sparked a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across such diverse industries as consumer products, aerospace, medical devices and automotive engineering. This book will help designers, R&D personnel, and practicing engineers grasp the latest developments in the field of 3D Printing and Additive Manufacturing.
Download or read book 3D Printing written by John M. Jordan and published by MIT Press. This book was released on 2019-03-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible introduction to 3D printing that outlines the additive manufacturing process, industrial and household markets, and emerging uses. The use of 3D printing—digitally controlled additive manufacturing—is growing rapidly. Consumer models of 3D printers allow people to fabricate small plastic objects, from cabinet knobs to wedding cake toppers. Industrial uses are becoming widespread, as businesses use the technology to fabricate prototypes, spare parts, custom-fitted prosthetics, and other plastic or metal items, often at lower cost and with greater efficiency than standard manufacturing. In this volume in the MIT Press Essential Knowledge series, John Jordan offers an accessible introduction to 3D printing, describing the printing process, industrial and household markets, and emerging uses. Jordan outlines the stages of 3D printing, from idea to software model to a printable file that slices the planned object into printable layers to the finished object itself. He describes additive technologies, consumer 3D printing in homes and schools, mass customization (which can create tens of millions of unique items), and industrial uses. Jordan explains that although 3D printers have not become the ubiquitous home appliance once predicted, they are making inroads into mass markets; and he discusses the business factors that may hinder industry adoption of 3D printing technologies. He considers the possible unintended consequences of 3D printing on jobs, as companies scramble to find employees with an uncommon skill set; on business models and supply chains, as manufacturing is decentralized; and on patent law, as machines can be programmed to copy protected property. Finally, Jordan looks at new and emerging uses, including bioprinting, building construction, and micromachines.
Download or read book Additive Manufacturing and 3D Printing Technology written by G. K. Awari and published by CRC Press. This book was released on 2021-02-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing and 3D Printing Technology: Principles and Applications consists of the construction and working details of all modern additive manufacturing and 3D-printing technology processes and machines, while also including the fundamentals, for a well-rounded educational experience. The book is written to help the reader understand the fundamentals of the systems. This book provides a selection of additive manufacturing techniques suitable for near-term application with enough technical background to understand the domain, its applicability, and to consider variations to suit technical and organizational constraints. It highlights new innovative 3D-printing systems, presents a view of 4D printing, and promotes a vision of additive manufacturing and applications toward modern manufacturing engineering practices. With the block diagrams, self-explanatory figures, chapter exercises, and photographs of lab-developed prototypes, along with case studies, this new textbook will be useful to students studying courses in Mechanical, Production, Design, Mechatronics, and Electrical Engineering.
Download or read book Additive Manufacturing Technologies and Applications written by Salvatore Brischetto and published by MDPI. This book was released on 2018-07-09 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Additive Manufacturing Technologies and Applications" that was published in Technologies
Download or read book The Business of Additive Manufacturing written by Harm-Jan Steenhuis and published by Taylor & Francis. This book was released on 2023-09-08 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although additive manufacturing (AM), also known as 3D printing, has been around for almost 40 years, few people know how it actually works and the huge impact and benefits it offers. This book explains what AM is, using business theories to explain and illustrate why AM is increasingly being used across industries. The book translates complex engineering technology into relevant managerial terminology, using real-world examples from industries such as apparel, construction and transportation. It provides an introduction into the technical background of AM before expanding on the applications, opportunities and challenges to business models. Offering a unique managerial perspective, this book is aimed primarily at a scholarly audience and those researching across business disciplines, including technology management, manufacturing, production and operations management. It can also be used in emerging business courses on AM.
Download or read book 3D Printing Technologies written by Ajay Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-01-29 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3d Printing And Additive Manufacturing Principles And Applications Fifth Edition Of Rapid Prototyping written by Chee Kai Chua and published by World Scientific Publishing Company. This book was released on 2016-11-29 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing (AM) technologies are developing impressively and are expected to bring about the next revolution. AM is gradually replacing traditional manufacturing methods in some applications because of its unique properties of customisability and versatility. This book provides a very comprehensive and updated text about different types of AM technologies, their respective advantages, shortcomings and potential applications.3D Printing and Additive Manufacturing: Principles and Applications is a comprehensive textbook that takes readers inside the world of additive manufacturing. This book introduces the different types of AM technologies, categorised by liquid, solid and powder-based AM systems, the common standards, the trends in the field and many more.Easy to understand, this book is a good introduction to anyone interested in obtaining a better understanding of AM. For people working in the industry, this book will provide information on new methods and practices, as well as recent research and development in the field. For professional readers, this book provides a comprehensive guide to distinguish between the different technologies, and will help them make better decisions regarding which technology they should use. For the general public, this book sheds some light on the fast-moving AM field.In this edition, new AM standards (e.g. Standard of Terminology and Classification of AM systems) and format standards will be included, Furthermore, the listing of new machines and systems, materials, and software; as well as new case studies and applications in industries that have recently adopted AM (such as the Marine and Offshore industry) have also been incorporated.
Download or read book Advances in 3D Printing Additive Manufacturing Technologies written by David Ian Wimpenny and published by Springer. This book was released on 2016-08-23 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume comprises select chapters on advanced technologies for 3D printing and additive manufacturing and how these technologies have changed the face of direct, digital technologies for rapid production of models, prototypes and patterns. Because of its wide applications, 3D printing and additive manufacturing technology has become a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across industries such as consumer products, aerospace, medical devices and automotives. The objective of this book is to help designers, R&D personnel, and practicing engineers understand the state-of-the-art developments in the field of 3D Printing and Additive Manufacturing.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Download or read book 3D Printing Cultures Politics and Hackerspaces written by Leandros Savvides and published by Emerald Group Publishing. This book was released on 2021-10-26 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book appreciably contributes to growing debates within Science and Technology Studies concerned with cultural politics, the emergence of citizen science and civil society interventions in shaping technology. By drawing on fieldwork data, Savvides examines the bourgeoning 3D printing culture in Hackerspaces, Makerspaces and Fab Labs.
Download or read book Customized Production Through 3D Printing in Cloud Manufacturing written by Lin Zhang and published by Elsevier. This book was released on 2022-11-22 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Customized Production Through 3D Printing in Cloud Manufacturing explains how to combine the latest cloud manufacturing and additive manufacturing technology to find innovative solutions to important problems in research and industry. The manufacturing industry strives constantly to improve levels of product personalization for its customers, who have become increasingly demanding in this respect in recent decades. Among the tools currently growing in use in the industry, there is great potential to address this demand. Cloud manufacturing maps manufacturing resources and capabilities to the cloud, adding the capacity to gather decentralized manufacturing resources and use manufacturing services on-demand, and 3D printing provides strong support for truly individualized manufactured components. This is the first book to cover the whole lifecycle of 3D printing services in a cloud environment, including topics like: cloud servitization of 3D printers, 3D printing model design, supply-demand matching and scheduling, on-demand using and pricing, printing monitoring in cloud, and printing service evaluation. With a systematic introduction to this promising manufacturing paradigm, as well as coverage of models and service management to practical applications, this book will meet the needs of a broad range of researchers as well as practitioners. Provides readers with a unique combined technical overview of two rapidly developing technologies and how they interact in a modern manufacturing system Explores important challenges to security and privacy posed by these new technologies Draws on valuable knowledge of how these technologies have been applied in innovative industry settings
Download or read book 3D Printing For Dummies written by Richard Horne and published by John Wiley & Sons. This book was released on 2017-05-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bestselling book on 3D printing 3D printing is one of the coolest inventions we've seen in our lifetime, and now you can join the ranks of businesspeople, entrepreneurs, and hobbyists who use it to do everything from printing foods and candles to replacement parts for older technologies—and tons of mind-blowing stuff in between! With 3D Printing For Dummies at the helm, you'll find all the fast and easy-to-follow guidance you need to grasp the methods available to create 3D printable objects using software, 3D scanners, and even photographs through open source software applications like 123D Catch. Thanks to the growing availability of 3D printers, this remarkable technology is coming to the masses, and there's no time like the present to let your imagination run wild and actually create whatever you dream up—quickly and inexpensively. When it comes to 3D printing, the sky's the limit! Covers each type of 3D printing technology available today: stereolithology, selective sintering, used deposition, and granular binding Provides information on the potential for the transformation of production and manufacturing, reuse and recycling, intellectual property design controls, and the commoditization of products Walks you through the process of creating a RepRap printer using open source designs, software, and hardware Offers strategies for improved success in 3D printing On your marks, get set, innovate!
Download or read book Multimaterial 3D Printing Technology written by Jiquan Yang and published by Academic Press. This book was released on 2021-01-21 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-material 3D Printing Technology introduces the first models for complex construction and manufacturing using a multi-material 3D printer. The book also explains the advantages that these innovative models provide at various points of the manufacturing supply chain. Innovations in fields such as medicine and aerospace are seeing 3D printing applied to problems that require the technology to develop beyond its traditional definitions. This groundbreaking book provides broad coverage of the theory behind this emerging technology, and the technical details required for readers to investigate these methods for themselves. In addition to describing new models for application of this technology, this book also systematically summarizes the historical models, materials and relevant technologies that are important in multi-material 3D printing. Introduces the heterogeneous object model for 3D printing Provides case studies of the use of hybrid 3D Printing to create gears and human bone Presents techniques which are easy to realize using commercial 3D printers
