Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. - Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material - Includes methods for developing Concrete Polymer Building Components for 3D Printing - Provides methods for formulating geopolymers for 3D printing for construction applications

Download or read book 3D Printing of Concrete written by Arnaud Perrot and published by John Wiley & Sons. This book was released on 2019-04-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.

Download or read book Printing Architecture written by Ronald Rael and published by Chronicle Books. This book was released on 2018-05-22 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although 3D printing promises a revolution in many industries, primarily industrial manufacturing, nowhere are the possibilities greater than in the field of product design and modular architecture. Ronald Rael and Virginia San Fratello, of the cutting-edge San Francisco–based design firm Emerging Objects, have developed remarkable techniques for "printing" from a wide variety of powders, including sawdust, clay, cement, rubber, concrete, salt, and even coffee grounds, opening an entire realm of material, phenomenological, and ecological possibilities to designers. In addition to case studies and illustrations of their own work, Rael and San Fratello offer guidance for sourcing alternative materials, specific recipes for mixing compounds, and step-by-step instructions for conducting bench tests and setting parameters for material testing, to help readers to understand the process of developing powder-based materials and their unique qualities.

Download or read book 3D Printed Body Architecture written by Neil Leach and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some architects dream of 3D-printing houses. Some even fantasise about 3D-printing entire cities. But what is the real potential of 3D printing for architects? This issue focuses on another strand of 3D-printing practice emerging among architects operating at a much smaller scale that is potentially more significant. Several architects have been working with the fashion industry to produce some exquisitely designed 3D-printed wearables. Other architects have been 3D-printing food, jewellery and other items at the scale of the human body. But what is the significance of this work? And how do these 3D-printed body-scale items relate to the discipline of architecture? Are they merely a distraction from the real business of the architect? Or do they point towards a new form of proto-architecture – like furniture, espresso makers and pavilions before them – that tests out architectural ideas and explores tectonic properties at a smaller scale? Or does this work constitute an entirely new arena of design? In other words, is 3D printing at the human scale to be seen as a new genre of 'body architecture'? This issue contains some of the most exciting work in this field today, and seeks to chart and analyse its significance. Contributors include: Paola Antonelli/MoMA, Francis Bitonti, Niccolo Casas, Behnaz Farahi, Madeline Gannon, Eric Goldemberg/MONAD Studio, Kyle von Hasseln/3D Systems Culinary Lab, Rem D Koolhaas, Julia Kӧrner, Neil Leach, Steven Ma/Xuberance, Neri Oxman/MIT Media Lab, Ronald Rael and Virginia San Fratello, Gilles Retsin, Jessica Rosenkrantz/Nervous System, and Patrik Schumacher/Zaha Hadid Architects.

Download or read book 3D Printing For Dummies written by Richard Horne and published by John Wiley & Sons. This book was released on 2017-05-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bestselling book on 3D printing 3D printing is one of the coolest inventions we've seen in our lifetime, and now you can join the ranks of businesspeople, entrepreneurs, and hobbyists who use it to do everything from printing foods and candles to replacement parts for older technologies—and tons of mind-blowing stuff in between! With 3D Printing For Dummies at the helm, you'll find all the fast and easy-to-follow guidance you need to grasp the methods available to create 3D printable objects using software, 3D scanners, and even photographs through open source software applications like 123D Catch. Thanks to the growing availability of 3D printers, this remarkable technology is coming to the masses, and there's no time like the present to let your imagination run wild and actually create whatever you dream up—quickly and inexpensively. When it comes to 3D printing, the sky's the limit! Covers each type of 3D printing technology available today: stereolithology, selective sintering, used deposition, and granular binding Provides information on the potential for the transformation of production and manufacturing, reuse and recycling, intellectual property design controls, and the commoditization of products Walks you through the process of creating a RepRap printer using open source designs, software, and hardware Offers strategies for improved success in 3D printing On your marks, get set, innovate!

Download or read book 3D Printed Houses The Future of Construction or Hype written by StoryBuddiesPlay and published by StoryBuddiesPlay. This book was released on 2024-04-11 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dive into the World of 3D-Printed Homes: A Comprehensive Guide Are you interested in the future of construction? Look no further than 3D-printed houses! This innovative technology is rapidly transforming the way we build homes, offering exciting possibilities for affordability, sustainability, and design customization. This comprehensive guide explores everything you need to know about 3D-printed houses. We'll delve into the printing process, from the materials used to the fascinating technology behind it. We'll also unpack the social impact of 3D-printed housing, exploring its potential to address housing shortages and create more sustainable communities. Here are some key areas we'll cover: The Printing Process Unveiled: We'll shed light on how 3D printing works for house construction, explaining the different materials used and the advantages of this method compared to traditional building techniques. Building a Better Future: We'll explore the social impact of 3D-printed houses, discussing how they can provide affordable housing solutions, improve disaster relief efforts, and promote sustainable construction practices. Customization at Your Fingertips: Discover the exciting potential for personalization in 3D-printed houses. Imagine designing your dream home with unique layouts and features, all made possible by this revolutionary technology. Living in a 3D-Printed Home: We'll take you inside the experience of living in a 3D-printed house. Get a glimpse into the comfort, functionality, and potential benefits of this new way of living. A Look Ahead: The Future of 3D Printing in Housing: We'll explore the cutting-edge advancements on the horizon for 3D-printed houses. Imagine faster printing times, self-guided robotic systems, and houses that can even adapt or "grow" over time. Whether you're a homeowner, architect, or simply curious about the future of construction, this guide provides valuable insights into the world of 3D-printed houses. Join us as we explore the potential of this technology to revolutionize the way we build and live.

Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book The Barefoot Architect written by Johan van Lengen and published by Shelter Publications, Inc.. This book was released on 2008 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: A former UN worker and prominent architect, Johan van Lengen has seen firsthand the desperate need for a "greener" approach to housing in impoverished tropical climates. This comprehensive book clearly explains every aspect of this endeavor, includingdesign (siting, orientation, climate consideration), materials (sisal, cactus, bamboo, earth), and implementation. The author emphasizes throughout the book what is inexpensive and sustainable. Included are sections discussing urban planning, small-scale energy production, cleaning and storing drinking water, and dealing with septic waste, and all information is applied to three distinct tropical regions: humid areas, temporate areas, and desert climates. Hundreds of explanatory drawings by van Lengen allow even novice builders to get started."

Download or read book 3D Printing Projects written by DK and published by Penguin. This book was released on 2017-10-03 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: From a simple desk tidy to an elaborate castle, this step-by-step guide to 3D printing is perfect for children and beginners who want to learn how to design and print anything even if they do not own a printer. 3D Printing Projects provides an introduction to the exciting and ever-expanding world of 3D designing and printing. Learn how a 3D printer works and the different types of 3D printers on the market. Understand the basic 3D printing and designing terms, how to create and prepare files for printing, and also how to scan things to create a 3D model! You will also find out the common troubles faced while 3D printing and simple tricks to fix them. All the projects included in the book can be made using freely available online 3D modeling/CAD programs. Each project has a print time, details of filament or material needed, and a difficulty rating - from "easy" for beginners to "difficult" for those looking for a new challenge. Step-by-step instructions walk you through the 3D design process, from digital modeling and sculpting to slicing, printing, and painting so that children can make their own shark-shaped phone stand, customized lamps, and much more. The book also gives inspiration to further enhance your projects once you've mastered the basics. Join the 3D printing revolution today with DK's 3D Printing Projects book.

Download or read book 3D Printing with Biomaterials written by A.J.M. van Wijk and published by IOS Press. This book was released on 2015-01-15 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing or 3D printing, manufacturing a product layer by layer, offers large design freedom and faster product development cycles, as well as low startup cost of production, on-demand production and local production. In principle, any product could be made by additive manufacturing. Even food and living organic cells can be printed. We can create, design and manufacture what we want at the location we want. 3D printing will create a revolution in manufacturing, a real paradigm change. 3D printing holds the promise to manufacture with less waste and energy. We can print metals, ceramics, sand, synthetic materials such as plastics, food or living cells. However, the production of plastics is nowadays based on fossil fuels. And that’s where we witness a paradigm change too. The production of these synthetic materials can be based also on biomaterials with biomass as feedstock. A wealth of new and innovative products are emerging when we combine these two paradigm changes: 3D printing and biomaterials. Moreover, the combination of 3D printing with biomaterials holds the promise to realize a truly sustainable and circular economy.

Download or read book The Big Tiny written by Dee Williams and published by Penguin. This book was released on 2015-04-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part how-to, part personal memoir, The Big Tiny is an utterly seductive meditation on the benefits of slowing down, scaling back, and appreciating the truly important things in life. More than ten years ago, a near-death experience abruptly reminded sustainability advocate and pioneer Dee Williams that life is short. So, she sold her sprawling home and built an eighty-four-square-foot house—on her own, from the ground up. Today, Williams can list everything she owns on one sheet of paper, her monthly housekeeping bills amount to about eight dollars, and it takes her about ten minutes to clean the entire house. Adapting a new lifestyle left her with the ultimate luxury—more time to spend with friends and family—and gave her the freedom to head out for adventure at a moment’s notice, or watch the clouds and sunset while drinking a beer on her (yes, tiny) front porch.

Download or read book What is the Future of 3D Printing written by Hal Marcovitz and published by Referencepoint Press. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printers are already being used to create clothing, cars, houses, and even human organs. Huge changes in manufacturing, medicine, transportation, architecture, and other areas of modern life are likely to take place as a result of advances in 3D printing.

Download or read book Current Trends in Geotechnical Engineering and Construction written by Mahdi Karkush and published by Springer Nature. This book was released on 2022-10-28 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected articles from the third International Conference on Geotechnical Engineering-Iraq 2022 (3ICGE-2022) held on May 29–31, 2022, at the University of Baghdad/Baghdad/Iraq. This proceeding discusses the latest research and studies in geotechnical engineering and all related topics in different fields such as civil engineering, environmental engineering, and architectural engineering. This book gives participants from both academics and industry a great chance to learn about recent developments in Geotechnical engineering fields.

Download or read book Tech For Good written by Marga Hoek and published by Taylor & Francis. This book was released on 2023-11-29 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tech For Good reveals how Fourth Industrial Revolution technologies will help solve the world’s greatest challenges like climate change, biodiversity loss, inequality, and poverty. Tech For Good presents a unique perspective on how business can successfully apply advanced technologies in a purpose-driven manner while unlocking new markets and seizing business opportunities. Packed with 75 real-life business cases of companies from all over the world, this inspiring book unfolds a compelling narrative about how businesses commercially synergize technology and sustainability. The purpose of this book is to imagine the unprecedented possibilities advanced technologies offer business to drive sustainable growth. Tech for Good will be vital for realizing our Global Goals.

Download or read book Re skilling Human Resources for Construction 4 0 written by Omoseni Adepoju and published by Springer Nature. This book was released on 2021-10-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the burgeoning revolution in the construction industry known as Construction 4.0, the attendant need for re-skilling human resources, and key stakeholders' roles in developing the required skills for Construction 4.0. It views the lack of 21st-century skills and skills gap in the industry as significant challenges limiting the uptake and implementation of Construction 4.0 technologies, especially in developing countries. In order to determine the skills required, this book examines the critical technologies of Construction 4.0, such as building information modelling (BIM), robotic construction, 3D printing and drones, which have transformed the construction industry, thereby creating digital, intelligent and sustainable construction solutions. Furthermore, the book considers the benefits, risks and relevant skills required to implement Construction 4.0 technologies.

Download or read book Housing and Technology written by Abraham R. Matamanda and published by Springer Nature. This book was released on 2022-10-31 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The housing and human settlement sector is fast changing, and technology is making it more complex than ever before. With reference to Zimbabwe, a developing country in Southern Africa, the essence of this book is to bring out housing as an issue within the technology debate and practice. The following themes emerge from the 6 chapters in the book: • The characterisation and conceptualisation of housing and technology and the nexus of both • The complexity of housing challenges and the problems governments face in providing adequate housing, especially for the poor • Diverse practices in housing construction through the application of different typologies of technology • Assessment of the feasibility of technologies in housing development in Zimbabwe by mirroring them against global experiences. • Discussion of alternative policy approaches that may guide technology integration in housing development. This book will excite scholars and practitioners in urban and development studies, construction project management, urban sociology, geography, real estate together with policymakers and government officials.

Download or read book Automating Cities written by Brydon T. Wang and published by Springer Nature. This book was released on 2021-01-04 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advancements in the use of automated systems in the design, construction, operation and future of the built environment and its occupants. It considers how the use of automated decision-making frameworks, artificial intelligence and other technologies of automation are presently impacting the practice of architects, engineers, project managers and contractors, and articulates the near future changes to workflows, legal frameworks and the wider AEC industry. This book surveys and compiles the use of city apps, robots that operate buildings and fabricate structural elements, 3D printing, drones, sensors, algorithms, and advanced prefabricated modules. The book also contributes to the growing literature on smart cities, and explores the impacts on data privacy and data sovereignty that arise through the use of sensors, digital twins and intelligent transport systems. It provides a useful reference for further research and development in the area of automation in design and construction to architects, engineers, project managers, superintendents and construction lawyers, contractors, policy makers, and students.