Download or read book 3D Paper Printing for the Built Environment written by Dunia Abdullah Agha and published by Springer Nature. This book was released on 2024 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Printing Architecture written by Ronald Rael and published by Chronicle Books. This book was released on 2018-05-22 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although 3D printing promises a revolution in many industries, primarily industrial manufacturing, nowhere are the possibilities greater than in the field of product design and modular architecture. Ronald Rael and Virginia San Fratello, of the cutting-edge San Francisco–based design firm Emerging Objects, have developed remarkable techniques for "printing" from a wide variety of powders, including sawdust, clay, cement, rubber, concrete, salt, and even coffee grounds, opening an entire realm of material, phenomenological, and ecological possibilities to designers. In addition to case studies and illustrations of their own work, Rael and San Fratello offer guidance for sourcing alternative materials, specific recipes for mixing compounds, and step-by-step instructions for conducting bench tests and setting parameters for material testing, to help readers to understand the process of developing powder-based materials and their unique qualities.

Download or read book Handbook of Research on Driving Transformational Change in the Digital Built Environment written by Underwood, Jason and published by IGI Global. This book was released on 2021-05-07 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction industry is amidst a digital transformation that is focused on addressing well-documented issues and calls for significant improvements and changes through increased productivity, whole-life value, client focus, reduction of waste, and being more sustainable. The key aspect to driving change and transformation is the education and upskilling of the required workforce towards developing the required capacities. Various approaches can be taken to embed digital construction within education and through collaborative efforts in order to drive change and facilitate improvements. The Handbook of Research on Driving Transformational Change in the Digital Built Environment focuses on current developments in practice and education towards facilitating transformation in the built environment. This book provides insight, from a practice perspective, in relation to the client’s understanding, digitally enabled collaboration, interoperability and open standards, and maturity/capability. Covering topics that include digital transformation and construction, digitally enabled infrastructure, building information modelling, collaborative digital education, and the digital built environment, this book is an ideal reference source for engineers, professionals, and researchers in the field of digital transformation as well as doctoral scholars, doctoral researchers, professionals, and academicians.

Download or read book Gulf Conference on Sustainable Built Environment written by Ali Bumajdad and published by Springer Nature. This book was released on 2020-04-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings together outstanding contributions to the Gulf Conference on Sustainable Built Environment, held at the Marina Hotel Kuwait, near Kuwait City. The Proceedings collects 29 papers on a range of engineering and materials challenges, and best practices, addressing development of new sustainable building materials, performance improvement of structures and tall buildings, developing monitoring and analysis techniques and frameworks for existing infrastructure under environmental effects, development of long-term sustainability plans for building stock, and development of energy efficient buildings in the gulf region. The Conference was organized by the Kuwait Foundation for the Advancement of Sciences (KFAS), the Massachusetts Institute of Technology, the Kuwait Institute for Scientific Research, and Kuwait University.

Download or read book 3D Printing with Biomaterials written by A.J.M. van Wijk and published by IOS Press. This book was released on 2015-01-15 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing or 3D printing, manufacturing a product layer by layer, offers large design freedom and faster product development cycles, as well as low startup cost of production, on-demand production and local production. In principle, any product could be made by additive manufacturing. Even food and living organic cells can be printed. We can create, design and manufacture what we want at the location we want. 3D printing will create a revolution in manufacturing, a real paradigm change. 3D printing holds the promise to manufacture with less waste and energy. We can print metals, ceramics, sand, synthetic materials such as plastics, food or living cells. However, the production of plastics is nowadays based on fossil fuels. And that’s where we witness a paradigm change too. The production of these synthetic materials can be based also on biomaterials with biomass as feedstock. A wealth of new and innovative products are emerging when we combine these two paradigm changes: 3D printing and biomaterials. Moreover, the combination of 3D printing with biomaterials holds the promise to realize a truly sustainable and circular economy.

Download or read book 3D Printing Architecture written by Carlos BAÑÓN and published by Springer Nature. This book was released on 2020-10-01 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates how architectural design advances as a result of the rapid developments in 3D Printing. As this technology become more powerful, faster and cheaper, novel workflows are becoming available and revolutionizing all stages of the design process, from early spatial concepts, to subsequent project development, advanced manufacturing processes, and integration into functional buildings. Based on a literature review and case studies of ten built projects, the book discusses the implications of the ongoing manufacturing revolution for the field of architecture.

Download or read book 3D Printing for Construction in the Transformation of the Building Industry written by Bárbara Rangel and published by CRC Press. This book was released on 2024-11-08 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: As concrete revolutionised construction in the 20th century, digitalisation is transforming the building industry (BI). Process automation and 3D printing (3DP) are commonplace in the industry and our homes. However, due to BI’s scale and complexity, Additive Manufacturing (AM) is in its native stage. Ongoing scientific research has been providing knowledge that will simplify the integration of 3DCP in the market, exploring its materiality, technologies, and design methodologies. This book provides an overview of the latest research achievements of the design possibilities that 3DP for construction (3DC) can offer in the various fields of construction, particularly architecture and engineering.

Download or read book Proceedings of 3rd International Sustainable Buildings Symposium ISBS 2017 written by Seyhan Fırat and published by Springer. This book was released on 2018-03-28 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest advances, innovations, and applications in the field of building design, environmental engineering and sustainability as presented by leading international researchers, engineers, architects and urban planners at the 3rd International Sustainable Buildings Symposium (ISBS), held in Dubai, UAE from 15 to 17 March 2017. It covers highly diverse topics, including smart cities, sustainable building and construction design, sustainable urban planning, infrastructure development, structural resilience under natural hazards, water and waste management, energy efficiency, climate change impacts, life cycle assessment, environmental policies, and strengthening and rehabilitation of structures. The contributions amply demonstrate that sustainable building design is key to protecting and preserving natural resources, economic growth, cultural heritage and public health. The contributions were selected by means of a rigorous peer-review process and highlight many exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists.

Download or read book Circular Economy for the Built Environment written by Rabia Charef and published by Taylor & Francis. This book was released on 2024-06-03 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the circular economy in the built environment, presenting a fusion of insights from esteemed researchers and seasoned practitioners. The chapters cover pivotal themes, including the transformative concept of buildings as material banks, innovative design approaches, and the potential of digitalization for a circular built environment. Beyond these foundational themes, the book critically addresses the integration of low-tech solutions and some principles of sobriety in the built environment. It also takes an informed look at the role of standardization, providing nuanced insights into its driving influence on circular practices and the associated challenges and opportunities. The book adopts a trans-scalar perspective by traversing the entire spectrum of building phases from initial programming to the recovery phase, as well as from the scale of materials to the scale of buildings, offering a profound examination of the intricate dynamics involved in the offer/demand for recovered materials. This book highlights the paramount need to harmonize research with practical applications. By spotlighting effective circular practices and elucidating the challenges faced by practitioners, it identifies fertile grounds for further research. Moreover, the book extends its reach by offering practical ideas on how practitioners can seamlessly adopt a circular approach in both thought and realization. Circular Economy for the Built Environment: Research and Practice is a must-read book for students, researchers, academics, and practitioners in the fields of architecture, planning, engineering, construction, and real estate. This book provides a compelling narrative that bridges the theoretical and practical realms of the circular economy in the built environment.

Download or read book Structures and Architecture A Viable Urban Perspective written by Marie Frier Hvejsel and published by CRC Press. This book was released on 2022-07-07 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures and Architecture. A Viable Urban Perspective? contains extended abstracts of the research papers and prototype submissions presented at the Fifth International Conference on Structures and Architecture (ICSA2022, Aalborg, Denmark, 6-8 July 2022). The book (578 pages) also includes a USB with the full texts of the papers (1448 pages). The contributions on creative and scientific aspects in the conception and construction of structures as architecture, and on the role of advanced digital-, industrial- and craft -based technologies in this matter represent a critical blend of scientific, technical, and practical novelties in both fields. Hence, as part of the proceedings series Structures and Architecture, the volume adds to a continuous exploration and development of the synergetic potentials of the fields of Structures and Architecture. With each volume further challenging the conditions, problems, and potentials related to the art, practice, and theory of teaching, researching, designing, and building structures as vehicles towards a viable architecture of the urban environment. The volumes of the series appear once every three years, in tandem with the conferences organized by the International Association of Structures and Architecture and are intended for a global readership of researchers, practitioners, and students, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers, planners, urban designers, anthropologists, economists, sociologists, artists, product manufacturers, and other professionals involved in the design and realization of architectural, structural, and infrastructural projects.

Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material Includes methods for developing Concrete Polymer Building Components for 3D Printing Provides methods for formulating geopolymers for 3D printing for construction applications

Download or read book 3D Printing for Construction with Alternative Materials written by Bárbara Rangel and published by Springer Nature. This book was released on 2023-01-01 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the latest achievements and design possibilities that 3D printing for construction (DPC) can offer, the alternative materials to natural aggregates or cement and even the 4th dimension that is already starting in this area. DPC materiality is starting to be explored in architecture as a new design language to reach not only outrageous forms but also to leverage the building process and its performance. Like Corbusier explored the concrete potentiality of concrete to release the façade and the plan, 3DPC is allowing to straighten design freedom with building performance. Industry and Scientific research are offering design professionals possibilities to start a new design movement. New paths are also starting to be tracked to reduce even more this building system footprint, stalking alternatives to Portland cement (PC). Today is already possible to build with the soil from the buildings’ ground. Leftovers from various industries are opening possibilities to decrease the PC and natural aggregates rate in printable mortars. From the industry, salt is becoming a possibility to be used in 3DPC. Sugar can ashes are improving the mortar performance reducing adjuvants. Construction and demolition waste can substitute natural aggregates and even offer new textures and color possibilities. Finally, to close this edition, the latest steps on the use of Phase Change Materials in additive manufacturing are collected to raise awareness to the next step of AM, the 4D printing.

Download or read book Rapid Manufacturing written by Neil Hopkinson and published by John Wiley & Sons. This book was released on 2006-02-22 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Manufacturing is a new area of manufacturing developed from a family of technologies known as Rapid Prototyping. These processes have already had the effect of both improving products and reducing their development time; this in turn resulted in the development of the technology of Rapid Tooling, which implemented Rapid Prototyping techniques to improve its own processes. Rapid Manufacturing has developed as the next stage, in which the need for tooling is eliminated. It has been shown that it is economically feasible to use existing commercial Rapid Prototyping systems to manufacture series parts in quantities of up to 20,000 and customised parts in quantities of hundreds of thousands. This form of manufacturing can be incredibly cost-effective and the process is far more flexible than conventional manufacturing. Rapid Manufacturing: An Industrial Revolution for the Digital Age addresses the academic fundamentals of Rapid Manufacturing as well as focussing on case studies and applications across a wide range of industry sectors. As a technology that allows manufacturers to create products without tools, it enables previously impossible geometries to be made. This book is abundant with images depicting the fantastic array of products that are now being commercially manufactured using these technologies. Includes contributions from leading researchers working at the forefront of industry. Features detailed illustrations throughout. Rapid Manufacturing: An Industrial Revolution for the Digital Age is a groundbreaking text that provides excellent coverage of this fast emerging industry. It will interest manufacturing industry practitioners in research and development, product design and materials science, as well as having a theoretical appeal to researchers and post-graduate students in manufacturing engineering, product design, CAD/CAM and CIFM.

Download or read book sbe22 berlin Built environment within planetary boundaries written by Roswag-Klinge, Eike and published by Universitätsverlag der TU Berlin. This book was released on 2022-12-27 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sbe22 berlin D-A-CH conference as part of the SBE conference series campaign 2021–2023 will be hosted by the Natural Building Lab of TU Berlin in cooperation with KIT Karlsruhe, ETH Zürich and TU Graz. Based on the 17 UN Sustainable Development Goals, participants at the hybrid conference in autumn 2022 will discuss the challenges and opportunities presented by current transformation projects and processes at local and regional levels. As part of the SBE network, researchers will have the chance to make links between local approaches and wider regional, continental and global trends. The conference will provide a designoriented, architectural and urban planning entry point to a broad inter- and transdisciplinary debate on the following themes: resource management and material flows, climate neutral buildings, post-fossil infrastructures, critical digitalisation and socio-political frames for transitions. These themes represent key solution fields to address sustainability challenges within the planning, construction and real estate sector. Die sbe22 berlin D-A-CH Konferenz im Rahmen der SBE Konferenzreihe Kampagne 2021–2023 wird vom Natural Building Lab der TU Berlin in Kooperation mit dem KIT Karlsruhe, der ETH Zürich und der TU Graz ausgerichtet. Ausgehend von den 17 UN-Zielen für nachhaltige Entwicklung werden die Teilnehmer der Hybridkonferenz im Herbst 2022 die Herausforderungen und Chancen aktueller Transformationsprojekte und -prozesse auf lokaler und regionaler Ebene diskutieren. Als Teil des SBE-Netzwerks werden ForscherInnen die Möglichkeit haben, Verbindungen zwischen lokalen Ansätzen und breiteren regionalen, kontinentalen und globalen Trends herzustellen. Die Konferenz bietet einen entwurfsorientierten, architektonischen und städtebaulichen Einstieg in eine breite inter- und transdisziplinäre Debatte zu folgenden Themen: Ressourcenmanagement und Materialflüsse, klimaneutrale Gebäude, postfossile Infrastrukturen, kritische Digitalisierung und gesellschaftspolitische Rahmenbedingungen für Übergänge. Diese Themen stellen zentrale Lösungsfelder für die Bewältigung der Nachhaltigkeitsherausforderungen im Planungs-, Bau- und Immobiliensektor dar.

Download or read book 3D Printed Body Architecture written by and published by John Wiley & Sons. This book was released on 2018-02-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some architects dream of 3D-printing houses. Some even fantasise about 3D-printing entire cities. But what is the real potential of 3D printing for architects? This issue focuses on another strand of 3D-printing practice emerging among architects operating at a much smaller scale that is potentially more significant. Several architects have been working with the fashion industry to produce some exquisitely designed 3D-printed wearables. Other architects have been 3D-printing food, jewellery and other items at the scale of the human body. But what is the significance of this work? And how do these 3D-printed body-scale items relate to the discipline of architecture? Are they merely a distraction from the real business of the architect? Or do they point towards a new form of proto-architecture – like furniture, espresso makers and pavilions before them – that tests out architectural ideas and explores tectonic properties at a smaller scale? Or does this work constitute an entirely new arena of design? In other words, is 3D printing at the human scale to be seen as a new genre of 'body architecture'? This issue contains some of the most exciting work in this field today, and seeks to chart and analyse its significance. Contributors include: Paola Antonelli/MoMA, Francis Bitonti, Niccolo Casas, Behnaz Farahi, Madeline Gannon, Eric Goldemberg/MONAD Studio, Kyle von Hasseln/3D Systems Culinary Lab, Rem D Koolhaas, Julia Kӧrner, Neil Leach, Steven Ma/Xuberance, Neri Oxman/MIT Media Lab, Ronald Rael and Virginia San Fratello, Gilles Retsin, Jessica Rosenkrantz/Nervous System, and Patrik Schumacher/Zaha Hadid Architects.

Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book Proceedings of the 2021 DigitalFUTURES written by Philip F. Yuan and published by Springer Nature. This book was released on 2021-09-21 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is a compilation of selected papers from 2021 DigitalFUTURES—The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021). The work focuses on novel techniques for computational design and robotic fabrication. The contents make valuable contributions to academic researchers, designers, and engineers in the industry. As well, readers encounter new ideas about understanding material intelligence in architecture.