Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2348 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at the University of Washington, Seattle on July 30 to August 4, 1995. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the Department of Energy, the National Institute of Standards and Technology, the Federal Aviation Administration, the National Science Foundation IndustryiUniversity Cooperative Research Centers, and the Working Group in Quantitative NDE. This year's Review of Progress in QNDE was attended by approximately 450 participants from the US and many foreign countries who presented over 375 papers. The meeting was divided into 36 sessions with as many as four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications or inspection systems, and it included many important methods of inspection science from acoustics to x-rays. In the last several years, the Review has stabilized at about its current size. Most participants seem to agree it is large enough to permit a full-scale overview of the latest developments but still small enough to retain the collegial atmosphere which has marked the Review since its inception. The Proceedings are structured in a format to reflect the organization of the Review itself, producing a more logical organization for both the meeting and the present volume.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by and published by . This book was released on 2005 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Phased Array Ultrasonic Technology Applications written by R/D Tech and published by Québec : R/D Tech. This book was released on 2004 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Phased Array Ultrasonic Technology Applications written by and published by Olympus Ndt. This book was released on 2007 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustical Imaging written by Woon Siong Gan and published by John Wiley & Sons. This book was released on 2012-07-23 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology of acoustical imaging has advanced rapidly over the last sixty years, and now represents a sophisticated technique applied to a wide range of fields including non-destructive testing, medical imaging, underwater imaging and SONAR, and geophysical exploration. Acoustical Imaging: Techniques and Applications for Engineers introduces the basic physics of acoustics and acoustical imaging, before progressing to more advanced topics such as 3D and 4D imaging, elasticity theory, gauge invariance property of acoustic equation of motion and acoustic metamaterials. The author draws together the different technologies in sonar, seismic and ultrasound imaging, highlighting the similarities between topic areas and their common underlying theory. Key features: Comprehensively covers all of the important applications of acoustical imaging. Introduces the gauge invariance property of acoustic equation of motion, with applications in the elastic constants of isotropic solids, time reversal acoustics, negative refraction, double negative acoustical metamaterial and acoustical cloaking. Contains up to date treatments on latest theories of sound propagation in random media, including statistical treatment and chaos theory. Includes a chapter devoted to new acoustics based on metamaterials, a field founded by the author, including a new theory of elasticity and new theory of sound propagation in solids and fluids and tremendous potential in several novel applications. Covers the hot topics on acoustical imaging including time reversal acoustics, negative refraction and acoustical cloaking. Acoustical Imaging: Techniques and Applications for Engineers is a comprehensive reference on acoustical imaging and forms a valuable resource for engineers, researchers, senior undergraduate and graduate students.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2393 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at the University of California San Diego, in La Jolla, California on July 19- July 24, 1992. The Review was organized by the Center for NDE at Iowa State University and the Ames Laboratory of the USDOE in cooperation with a number of organizations including the Air Force Wright Laboratory Materials Directorate, the American Society for Nondestructive Testing, the Center for NDE at Johns Hopkins University, the Department of Energy, the Federal Aviation Administration, the National Institute of Standards and Technology, the National Science Foundation IndustrylUniversity Cooperative Research Centers, and the Working Group in Quantitative NDE. This year's Review of Progress in QNDE was attended by approximately 475 participants from the U. S. and many foreign countries who presented over 380 papers. With such a large volume of work to review, the meeting was divided into 36 sessions with as many as four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications or inspection systems, and it included all methods of inspection science from acoustics to x-rays. During the last twenty years, the participants of the Review have contributed to its steady growth. Thanks to their efforts, the Review is today one of the largest and most significant gatherings of NDE researchers and engineers anywhere in the world.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Ultrasonic and Advanced Methods for Nondestructive Testing and Material Characterization written by Chi-hau Chen and published by World Scientific. This book was released on 2007 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.
Download or read book Ultrafast Ultrasound Imaging written by Hideyuki Hasegawa and published by MDPI. This book was released on 2018-09-21 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Ultrafast Ultrasound Imaging" that was published in Applied Sciences
Download or read book Diagnostic Ultrasound Imaging Inside Out written by Thomas L. Szabo and published by Academic Press. This book was released on 2013-12-05 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostic Ultrasound Imaging provides a unified description of the physical principles of ultrasound imaging, signal processing, systems and measurements. This comprehensive reference is a core resource for both graduate students and engineers in medical ultrasound research and design. With continuing rapid technological development of ultrasound in medical diagnosis, it is a critical subject for biomedical engineers, clinical and healthcare engineers and practitioners, medical physicists, and related professionals in the fields of signal and image processing. The book contains 17 new and updated chapters covering the fundamentals and latest advances in the area, and includes four appendices, 450 figures (60 available in color on the companion website), and almost 1,500 references. In addition to the continual influx of readers entering the field of ultrasound worldwide who need the broad grounding in the core technologies of ultrasound, this book provides those already working in these areas with clear and comprehensive expositions of these key new topics as well as introductions to state-of-the-art innovations in this field. - Enables practicing engineers, students and clinical professionals to understand the essential physics and signal processing techniques behind modern imaging systems as well as introducing the latest developments that will shape medical ultrasound in the future - Suitable for both newcomers and experienced readers, the practical, progressively organized applied approach is supported by hands-on MATLAB® code and worked examples that enable readers to understand the principles underlying diagnostic and therapeutic ultrasound - Covers the new important developments in the use of medical ultrasound: elastography and high-intensity therapeutic ultrasound. Many new developments are comprehensively reviewed and explained, including aberration correction, acoustic measurements, acoustic radiation force imaging, alternate imaging architectures, bioeffects: diagnostic to therapeutic, Fourier transform imaging, multimode imaging, plane wave compounding, research platforms, synthetic aperture, vector Doppler, transient shear wave elastography, ultrafast imaging and Doppler, functional ultrasound and viscoelastic models
Download or read book NDE Challenges of the 21st Century written by Cetin Cetinkaya and published by . This book was released on 2001 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diffraction of Elastic Waves and Dynamic Stress Concentrations written by C. C. Mow and published by Crane Russak, Incorporated. This book was released on 1973 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic Testing of Materials written by Josef Krautkrämer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amendments of this third English edition with respect to the second one concern beside some printing errors the replacement of some pictures in part D by more modern ones and updating the list of stand ards to the state of the fourth German edition. J OSEF KRAUTKRÄMER Cologne, January 1983 Preface to the Second Edition This seeond English edition is based on the third German edition. In view of most recent teehnologieal advanees it has beeome neeessary in many instanees to supplement the seeond German edition and to revise some parts completely. In addition to piezo-eleetric methods, others are now also extensively diseussed in Chapter 8. As for the intensity method, ultrasonie holo graphy is treated in the new Seetion 9. 4. In Part B, for reasons of syste maties, the resonanee method has been ineluded under transit-time methods. It appeared neeessary to elaborate in greater detail the defini tion of the properties of pulse-echo testing equipment and their measure ments (10. 4). The more recent findings of pulse speetroscopy (5. 6) and sound-emission analysis (12) are mentioned only in passing because their significanee is still controversial. Apart from numerous additions, partieularly those coneerning automatie testing installations, Part C also eontains a new chapter whieh deals with tests on nu eIe ar reactors (28), as weIl as abrief diseussion of surfaee-hardness tests (32. 4). It beeame impossible to include a critieal analysis of the principal standards in Chapter 33.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1981 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book MRI Guided Focused Ultrasound Surgery written by Ferenc A. Jolesz and published by CRC Press. This book was released on 2007-09-26 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: MRI-Guided Focused Ultrasound Surgery will be the first publication on this new technology, and will present a variety of current and future clinical applications in tumor ablation treatment. This source helps surgeons and specialists evaluate, analyze, and utilize MRI-guided focused ultrasound surgery - bridging the gap between phase 3 clinical tr
