Download or read book 2D Liquid Lens Based on EWOD written by Maziar Ahmadi Zeidabadi and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: [ANGLÈS] This thesis presents the fabrication, development and characteristics of a liquid lens based on electrowetting. Essentially, when the lens is in liquid form, both its position and its curvature can be reversibly tuned through electrowetting. Variable focal length liquid microlenses are being used to create the next generation lenses for a wide variety of microelectromechanical systems (MEMS) and NEMS applications. In real-time operations, the application of a voltage causes the lens to change its focal length. The liquid lens recovers its initial focal length upon removal of the voltage. Taking a wettability mechanism approach, surface properties are determined by contact angles of different test liquids on the samples due to their unique surface energies [1]. To search out and examine the particularities, in an attempt to learn the facts about liquid lenses, electrowetting is incorporated into the design of a liquid lens in a certain fabrication plan. This electrowetting is considered to control and maintain the planar (2D) liquid lens shape and its position by applying potential between electrodes and ground through the conductive liquid. Based on this electrowetting, a planar liquid lens is designed, consisting of conductive liquid such as oil or water and substrate with specific pattern of electrodes. The conductive drop should be confined to the center position. The electrodes, covered by a hydrophobic layer, when applying electric potential on them (or some of them) help to change the shape and position of the droplet that forms the lens. The focal length of the lens also varies, according to different droplet dimensions.
Download or read book Contribution to Liquid Lens Technology written by Maziar Ahmadi Zeidabadi and published by . This book was released on 2016 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest on microfluidic systems based on electrowetting-on-dielectric (EWOD) and the miniaturization of such integrated devices, has increased significantly mainly due to the advent of mass market applications such as lab-on-chip, liquid lenses and reflective displays. The main objective of this work focuses on the scientific and technological challenges that the fabrication and optimization of liquid lens faces. Those are mainly related to the materials used and their associated fabrication techniques, in order to have stable devices with high performance for long term functionality. The work reported here contributes the research to reduce the actuation voltage and to increase stability and reliability of electrowetting devices such as liquid lenses at laboratory scale. We address various aspects related to liquid lenses: (a), improvement of the hydrophobic layer deposition process leading contact angle recovery enhancement, (b) investigation of the dielectric materials and deposition techniques to reduce the required applied voltage (c) specific design of electrodes for 2D movement of the liquid lens, and (d) investigation of nonaqueous liquids to improve the dynamic behavior and long term cycling functionality. (e) An attempt is made to develop behavioral models that can explain EWOD phenomena with an electronic circuit software.
Download or read book A Liquid Lens Based on Electrowetting written by Jihwan Park and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Micro Optics written by Hans Zappe and published by Cambridge University Press. This book was released on 2010-09-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: From optical fundamentals to advanced applications, this comprehensive guide to micro-optics covers all the key areas for those who need an in-depth introduction to micro-optic devices, technologies, and applications. Topics covered range from basic optics, optical materials, refraction, and diffraction, to micro-mirrors, micro-lenses, diffractive optics, optoelectronics, and fabrication. Advanced topics, such as tunable and nano-optics, are also discussed. Real-world case studies and numerous worked examples are provided throughout, making complex concepts easier to follow, whilst an extensive bibliography provides a valuable resource for further study. With exercises provided at the end of each chapter to aid and test understanding, this is an ideal textbook for graduate and advanced undergraduate students taking courses in optics, photonics, micro-optics, microsystems, and MEMs. It is also a useful self-study guide for research engineers working on optics development.
Download or read book Tunable Micro optics written by Hans P. Zappe and published by Cambridge University Press. This book was released on 2016 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive survey of state-of-the-art tunable micro-optics, covering advances in materials, components and systems.
Download or read book Microlenses written by Hongrui Jiang and published by MDPI. This book was released on 2018-10-08 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Microlenses" that was published in Micromachines
Download or read book Encyclopedia of Microfluidics and Nanofluidics written by Dongqing Li and published by Springer Science & Business Media. This book was released on 2008-08-06 with total page 2242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering all aspects of transport phenomena on the nano- and micro-scale, this encyclopedia features over 750 entries in three alphabetically-arranged volumes including the most up-to-date research, insights, and applied techniques across all areas. Coverage includes electrical double-layers, optofluidics, DNC lab-on-a-chip, nanosensors, and more.
Download or read book Physical Model and Applications of High Efficiency Electro Optical Conversion Devices written by Feng Chi and published by Frontiers Media SA. This book was released on 2022-02-02 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MEMS Mirrors written by Huikai Xie and published by MDPI. This book was released on 2018-05-04 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "MEMS Mirrors" that was published in Micromachines
Download or read book Advances and Challenges in Pharmaceutical Technology written by Amit Kumar Nayak and published by Academic Press. This book was released on 2021-02-09 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Challenges in Pharmaceutical Technology: Materials, Process Development and Drug Delivery Strategies examines recent advancements in pharmaceutical technology. The book discusses common formulation strategies, including the use of tools for statistical formulation optimization, Quality by design (QbD), process analytical technology, and the uses of various pharmaceutical biomaterials, including natural polymers, synthetic polymers, modified natural polymers, bioceramics, and other bioinorganics. In addition, the book covers rapid advancements in the field by providing a thorough understanding of pharmaceutical processes, formulation developments, explorations, and exploitation of various pharmaceutical biomaterials to formulate pharmaceutical dosage forms. - Provides extensive information and analysis on recent advancements in the field of pharmaceutical technology - Includes contributions from global leaders and experts in academia, industry and regulatory agencies - Uses high quality illustrations, flow charts and tables to explain concepts and text to readers, along with practical examples and research case studies
Download or read book Nanomaterials for Green Energy written by Bharat A. Bhanvase and published by Elsevier. This book was released on 2018-04-18 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Green Energy focuses on the synthesis, characterization and application of novel nanomaterials in the fields of green science and technology. This book contains fundamental information about the properties of novel nanomaterials and their application in green energy. In particular, synthesis and characterization of novel nanomaterials, their application in solar and fuel cells and batteries, and nanomaterials for a low-toxicity environment are discussed. It will provide an important reference resource for researchers in materials science and renewable energy who wish to learn more about how nanomaterials are used to create cheaper, more efficient green energy products. - Provides fundamental information about the properties and application of new low-cost nanomaterials for green energy - Shows how novel nanomaterials are used to create more efficient solar cells - Offers solutions to common problems related to the use of materials in the development of energy- related technologies
Download or read book Microfluidics written by Yu Song and published by John Wiley & Sons. This book was released on 2018-05-07 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book offering a global overview of fundamental microfluidics and the wide range of possible applications, for example, in chemistry, biology, and biomedical science. As such, it summarizes recent progress in microfluidics, including its origin and development, the theoretical fundamentals, and fabrication techniques for microfluidic devices. The book also comprehensively covers the fluid mechanics, physics and chemistry as well as applications in such different fields as detection and synthesis of inorganic and organic materials. A useful reference for non-specialists and a basic guideline for research scientists and technicians already active in this field or intending to work in microfluidics.
Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.
Download or read book Microfluidics written by Yujun Song and published by John Wiley & Sons. This book was released on 2018-01-04 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book offering a global overview of fundamental microfluidics and the wide range of possible applications, for example, in chemistry, biology, and biomedical science. As such, it summarizes recent progress in microfluidics, including its origin and development, the theoretical fundamentals, and fabrication techniques for microfluidic devices. The book also comprehensively covers the fluid mechanics, physics and chemistry as well as applications in such different fields as detection and synthesis of inorganic and organic materials. A useful reference for non-specialists and a basic guideline for research scientists and technicians already active in this field or intending to work in microfluidics.
Download or read book Microfluidic Devices for Biomedical Applications written by Xiujun James Li and published by Woodhead Publishing. This book was released on 2013-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics or lab-on-a-chip (LOC) is an important technology suitable for numerous applications from drug delivery to tissue engineering. Microfluidic devices for biomedical applications discusses the fundamentals of microfluidics and explores in detail a wide range of medical applications. The first part of the book reviews the fundamentals of microfluidic technologies for biomedical applications with chapters focussing on the materials and methods for microfabrication, microfluidic actuation mechanisms and digital microfluidic technologies. Chapters in part two examine applications in drug discovery and controlled-delivery including micro needles. Part three considers applications of microfluidic devices in cellular analysis and manipulation, tissue engineering and their role in developing tissue scaffolds and stem cell engineering. The final part of the book covers the applications of microfluidic devices in diagnostic sensing, including genetic analysis, low-cost bioassays, viral detection, and radio chemical synthesis. Microfluidic devices for biomedical applications is an essential reference for medical device manufacturers, scientists and researchers concerned with microfluidics in the field of biomedical applications and life-science industries.
Download or read book Electrowetting written by Frieder Mugele and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from the basic principles of wetting, electrowetting and fluid dynamics all the way up to those engineering aspects relevant for the development of specific devices, this is a comprehensive introduction and overview of the theoretical and practical aspects. Written by two of the most knowledgeable experts in the field, the text covers both current as well as possible future applications, providing basic working principles of lab-on-a-chip devices and such optofluidic devices as adaptive lenses and optical switches. Furthermore, novel e-paper display technology, energy harvesting and supercapacitors as well as electrowetting in the nano-world are discussed. Finally, the book contains a series of exercises and questions for use in courses on microfluidics or electrowetting. With its all-encompassing scope, this book will equally serve the growing community of students and academic and industrial researchers as both an introduction and a standard reference.
Download or read book MEMS 2005 Miami written by and published by . This book was released on 2005 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt:
