Download or read book 222 S Analytical Services Final Results for Tank 241 U 101 Grab Samples 1U 96 1 Through 1U 96 4 written by and published by . This book was released on 1996 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final, format IV, laboratory report for characterization of tank 241-U-101 (U-101) grab samples from risers 1 and 7. It transmits additional analytical data for specific gravity (Sp. G.), and all raw analytical data which were not provided in the 45-day report. The 45-day report is attached to this final report as Part II. Secondary analyses were not performed on any of the U-101 samples. This is because none of the primary analyte limits, which trigger the performance of secondary analyses, were exceeded. Grab samples were taken on May 29, 1996 and May 30, 1996 from risers 1 and 7, respectively, and were received at the 222-S Laboratory on the same days that they were collected. Analyses were performed in accordance with the Tank Sampling and Analysis Plan (TSAP) for this tank and the Safety Screening Data Quality Objective (DQO). The samples were analyzed for differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), total alpha activity (AT), visual appearance, bulk density, and specific gravity. A sample data summary table, includes sample analytical data accompanied by quality control data (for example, duplicate, spike, blank and standard results and detection limits and counting efforts). The table includes data for DSC, TGA, AT, bulk density, volume percent solids and Sp. G. analyses. Data regarding the visual appearance of samples, volume percent solids and density of the solids are provided in tabular form of the 45-day report (attached as Part II). The table of the 45-day report also associates the original customer sample number with corresponding laboratory sample numbers. The TSAP specified notification limits for only DSC and total alpha. Notification limits were not exceeded for DSC or total alpha analyses for any of the samples, consequently immediate notifications were not necessary and were not made.

Download or read book 222 S Laboratory Analytical Report for Tank 241 C 106 Grab Samples 6C 96 1 Through 6C 96 16 6C 96 17 FB written by and published by . This book was released on 1996 with total page 2643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the analytical report for grab samples 6C-96-1through 6C-96-16 and 6C-96-17-FB from tank 241-C-106.

Download or read book Tank 241 AN 101 Grab Samples 1AN 98 1 1AN 98 2 and 1AN 98 3 Analytical Results for the Final Report written by and published by . This book was released on 1999 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-AN-101 grab samples. Three grab samples 1AN-98-1, 1AN-98-2 and 1AN-98-3 were taken from riser 16 of tank 241-AN-101 on April 8, 1998 and received by the 222-S Laboratory on April 9, 1998. Analyses were performed in accordance with the ''Compatability Grab Sampling and Analysis Plan'' (TSAP) and the ''Data Quality Objectives for Tank Farms Waste Compatability Program'' (DQO). The analytical results are presented in the data summary report. No notification limits were exceeded.

Download or read book Waste Compatibility and Final Report for Tank 241 A 101 Grab Samples 1A 96 1 1A 96 2 and 1A 96 3 written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report deliverable for tank 241-A- 101 grab samples. Three grab samples (IA-96-1, IA-96-2 and IA-96-3) were taken from riser 4 of tank 241-A-101. Samples were collected on April 3, 1996 and received by the 222-S Laboratory on April 4, 1996. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO). The samples were subsampled and analyzed in accordance with the TSAP. Two of the three grab samples contained a significant amount of solids and special analyses were requested. None of the samples exceeded notification limits. No similarities in sample appearance were noted; this could be an explanation for the varying analytical results. Quality control issues are discussed in each analytical subheading. The raw data for all analyses are included in this report.

Download or read book Tank 241 AP 106 Grab Samples 6AP 96 1 Through 6AP 96 3 Analytical Results for the Final Report written by and published by . This book was released on 1996 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-AP-106 grab samples. This document presents the analytical results for three samples (6AP-96-1, 6AP-96-2 and 6AP-96-3) taken from riser 1 @ 150° of tank 241-AP-1 06 on September 12, 1996. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1996) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Fowler, 1995).

Download or read book Tank 241U102 Grab Samples 2U 99 1 and 2U 99 2 and 2U 99 3 Analytical Results for the Final Report written by and published by . This book was released on 1999 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-U-102 grab samples. Five grab samples were collected from riser 13 on May 26, 1999 and received by the 222-S laboratory on May 26 and May 27, 1999. Samples 2U-99-3 and 2U-99-4 were submitted to the Process Chemistry Laboratory for special studies. Samples 2U-99-1, 2U-99-2 and 2U-99-5 were submitted to the laboratory for analyses. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan for Fiscal year 1999 (TSAP) (Sasaki, 1999) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Fowler 1995, Mulkey and Miller 1998). The analytical results are presented in the data summary report. None of the subsamples submitted for differential scanning calorimetry (DSC), total organic carbon (TOC) and plutonium 239 (Pu239) analyses exceeded the notification limits as stated in TSAP.

Download or read book Tank 241 ER 311 Grab Samples ER311 98 1 ER311 98 2 ER311 98 3 Analytical Results for the Final Report written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for catch tank 241-ER-311 grab samples. Three grab samples ER311-98-1, ER311-98-2 and ER311-98-3 were taken from East riser of tank 241-ER-311 on August 4, 1998 and received by the 222-S Laboratory on August 4, 1998. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1998)and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Mulkey and Miller, 1997). The analytical results are presented in the data summary report (Table 1). No notification limits were exceeded.

Download or read book Tank 241 AX 101 Grab Samples 1AX 97 1 Through 1AX 97 3 Analytical Results for the Final Report written by and published by . This book was released on 1997 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-AX-101 grab samples. Four grab samples were collected from riser 5B on July 29, 1997. Analyses were performed on samples 1AX-97-1, 1AX-97-2 and 1AX-97-3 in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Rev. 1: Fowler, 1995; Rev. 2: Mulkey and Miller, 1997). The analytical results are presented in Table 1. No notification limits were exceeded. All four samples contained settled solids that appeared to be large salt crystals that precipitated upon cooling to ambient temperature. Less than 25 % settled solids were present in the first three samples, therefore only the supernate was sampled and analyzed. Sample 1AX-97-4 contained approximately 25.3 % settled solids. Compatibility analyses were not performed on this sample. Attachment 1 is provided as a cross-reference for relating the tank farm customer identification numbers with the 222-S Laboratory sample numbers and the portion of sample analyzed. Table 2 provides the appearance information. All four samples contained settled solids that appeared to be large salt crystal that precipitated upon cooling to ambient temperature. The settled solids in samples 1AX-97-1, 1AX-97-2 and 1AX-97-3 were less than 25% by volume. Therefore, for these three samples, two 15-mL subsamples were pipetted to the surface of the liquid and submitted to the laboratory for analysis. In addition, a portion of the liquid was taken from each of the these three samples to perform an acidified ammonia analysis. No analysis was performed on the settled solid portion of the samples. Sample 1AX-97-4 was reserved for the Process Chemistry group to perform boil down and dissolution testing in accordance with Letter of Instruction for Non-Routine Analysis of Single-Shell Tank 241-AX-101 Grab Samples (Field, 1997) (Correspondence 1). However, prior to the analysis, the sample was inadvertently archived and the solid portion was not represented in the archive.

Download or read book Tank 241 S 302 Grab Samples 302S 97 1 302S 97 2 and 302S 97 3 Analytical Results for the Final Report written by and published by . This book was released on 1998 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-S-302 grab samples. Three grab samples were collected on January 30, 1998. Analyses were performed on samples 302-S-97-1, 302-S-97-2 and 302-S-97-3 in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1997) and the Data Quality Objectives (DQO) for Tank Farms Waste Compatibility Program (Mulkey, 1997). The analytical results are presented in Table 1. No notification limits were exceeded. The sample breakdown diagrams (Attachment 1) are provided as a cross-reference for relating the tank farm customer identification numbers with the 222-S Laboratory sample numbers and the portion of sample analyzed. Table 2 provides the appearance information. Visual observation indicated that the sample was a clear, light-yellow liquid with less than one percent solids. No organic layer was observed. The 125 mL sample was submitted to the laboratory for analysis of inorganic analytes and radionuclides.

Download or read book Letters and Paragraphs Printed in the Coventry Mercury in the Years 1780 and 1781 Relating to Captain John Donellan Convicted of the Murder of Sir Theodosius Edward Allesley Boughton Bart at the Assizes Held at Warwick Friday 30th of March 1781 written by and published by . This book was released on 1845 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 60 day Waste Compatibility Safety Issues and Final Results for TX 244 Grab Samples written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Three grab samples (244-TX-96-1, 244-TX-96-2, and 244-TX-96-3) were taken from Riser 8 of Tank 241-TX-244 on October 18, 1996, and received by 222-S Laboratory on October 18, 1996. These samples were analyzed in accordance with Compatibility Grab Sampling and Analysis Plan (TSAP) and Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) in support ofthe Waste Compatibility Program. Notifications were made in accordance with TSAP for pH and OH- analyses. Upon further review, the pH notification was deemed unnecessary, as the notification limit did not apply to this tank.

Download or read book Tank 241 S 304 Grab Samples 304S 98 1 304S 98 2 and 304S 98 3 Analytical Results for the Final Report written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-S-304 grab samples. Four grab samples were collected from riser 4 on July 30, 1998. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1998) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO). The analytical results are presented in the data summary report (Table 1). None of the subsamples submitted for differential scanning calorimetry (DSC), total organic carbon (TOC) and plutonium 239 (Pu239) analyses exceeded the notification limits as stated in TSAP (Saaaki, 1998).

Download or read book Tank 241 AP 107 Grab Samples 7AP 97 1 7AP 97 2 and 7AP 97 3 Analytical Results for the Final Report written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-AP-107 grab samples. Three grab samples were collected from riser 1 on September 11, 1997. Analyses were performed on samples 7AP-97-1, 7AP-97-2 and 7AP-97-3 in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1997) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Rev. 1: Fowler, 1995; Rev. 2: Mulkey and Nuier, 1997). The analytical results are presented in the data summary report (Table 1). A notification was made to East Tank Farms Operations concerning low hydroxide in the tank and a hydroxide (caustic) demand analysis was requested. The request for sample analysis (RSA) (Attachment 2) received for AP-107 indicated that the samples were polychlorinated biphenyl (PCB) suspects. Therefore, prior to performing the requested analyses, aliquots were made to perform PCB analysis in accordance with the 222-S Laboratory administrative procedure, LAP-101-100. The results of this analysis indicated that no PCBs were present at 50 ppm and analysis proceeded as non-PCB samples. The results and raw data for the PCB analysis will be included in a revision to this document. The sample breakdown diagrams (Attachment 1) are provided as a cross-reference for relating the tank farm customer identification numbers with the 222-S Laboratory sample numbers and the portion of sample analyzed.

Download or read book Waste Compatibility Safety Issues and Final Results for Tank 241 SY 102 Grab Samples written by and published by . This book was released on 1997 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three grab samples (2SY-96-1, 2SY-96-2, and 2SY-96-3) were taken from Riser 1A of Tank 241-SY 102 on January 14, 1997, and received by 222-S Laboratory on January 14, 1997. These samples were analyzed in accordance with Compatibility Grab Sampling and Analysis Plan (TSAP) and Data Quality Objectives for Tank Farm Waste Compatibility Program (DQO) in support of the Waste Compatibility Program. No notifications were required based on sample results. Acetone analysis was not performed in accordance with Cancellation of Acetone Analysis for Tank 241-SY-102 Grab Samples.

Download or read book Tank 241 TX 302C Grab Samples 302C TX 97 1A Through 302C TX 97 3B Analytical Results for the Final Report written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 241-TX-302C grab samples. Six grabs samples (302C-TX-97-1A, 302C-TX-97-1B, 302C-TX-97-2A, 302C-TX-97-2B, 302C-TX-97-3A, and 302C-TX-97-3B) were collected from the catch tank level gauge riser on December 19, 1997. The ''A'' and ''B'' portions from each sample location were composited and analyses were performed on the composites in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) (Sasaki, 1997) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Rev. 1: Fowler, 1995; Rev. 2: Mulkey and Miller, 1997). The analytical results are presented in Table 1. No notification limits were exceeded. Appearance and Sample Handling Attachment 1 is provided as a cross-reference for relating the tank farm customer identification numbers with the 222-S Laboratory sample numbers and the portion of sample analyzed. Table 2 provides the appearance information.

Download or read book Tank 241S109 Grab Samples 9S 99 1 and 9S 99 2 and 9S 99 3 Analytical Results for the Final Report written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report for tank 2414-109 grab samples. Three grab samples were collected from riser 13 on July 28, 1999 and received by the 222-S laboratory on July 28, 1999. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan for Fiscal Year 1999 (TSAP) (Sasaki, 1999) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Fowler 1995, Mulkey and Miller 1998). The analytical results are presented in the data summary report (Table 1). None of the subsamples submitted for differential scanning calorimetry (DSC), total organic carbon (TOC) and plutonium 239 (Pu239) analyses exceeded the notification limits as stated in TSAP (Sasaki, 1999).

Download or read book Final Report for Tank 241 AY 101 Grab Samples 1AY 96 1 Through 1AY 96 10 and 1AY 96 FB written by and published by . This book was released on 1996 with total page 1223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains tables of the analytical results from grab samples from tank 241-AY-101. Activity levels of radionuclides are tabulated. This tanks has not been watch listed.