Download or read book 2023 IEEE Wireless and Microwave Technology Conference WAMICON written by IEEE Staff and published by . This book was released on 2023-04-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: WAMICON 2023 addresses up to date multidisciplinary research needs and interdisciplinary aspects of wireless and RF technology Highlighting Microwave and RF Innovations connecting Government, University and Industrial communities We welcome submissions on all aspects of RF Design and Microwave Microelectronics and Systems Topics of interest include Microwave Hardware for Space and Emerging Applications, mm Wave to THz Technologies, Power Amplifiers, Other Active Components, and Systems, Passive Components and Antennas

Download or read book 2024 IEEE Wireless and Microwave Technology Conference WAMICON written by IEEE Staff and published by . This book was released on 2024-04-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multidisciplinary research and technology trends in RF, microwaves, and wireless communications with emphasis on wireless system and device innovations for enabling intelligent communications and adaptive sensing

Download or read book 2022 IEEE 22nd Annual Wireless and Microwave Technology Conference WAMICON written by IEEE Staff and published by . This book was released on 2022-04-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference will address up to date multidisciplinary research needs and interdisciplinary aspects of wireless and RF technology

Download or read book 2021 IEEE 21st Annual Wireless and Microwave Technology Conference WAMICON written by IEEE Staff and published by . This book was released on 2021-04-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: WAMICON 2020 will address up to date multidisciplinary research needs and interdisciplinary aspects of wireless and RF technology with a central theme The central theme is typically a topic that there is an interest for further investigation, e g due to recent technological advances, is fairly new but innovative, and driven by a demand and or interest from the RF Microwave mm Wave community For this reason, the central theme is currently TBD

Download or read book 2021 IEEE 21st Annual Wireless and Microwave Technology Conference WAMICON written by and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2016 IEEE 17th Annual Wireless and Microwave Technology Conference WAMICON written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2018 IEEE 19th Wireless and Microwave Technology Conference WAMICON written by IEEE Staff and published by . This book was released on 2018-04-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference will address up to date multidisciplinary research needs and interdisciplinary aspects of wireless and RF technology

Download or read book 2016 IEEE 17th Annual Wireless and Microwave Technology Conference WAMICON written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2019 IEEE 20th Wireless and Microwave Technology Conference WAMICON written by IEEE Staff and published by . This book was released on 2019-04-08 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference will address up to date multidisciplinary research needs and interdisciplinary aspects of wireless and RF technology

Download or read book Resilient Hybrid Electronics for Extreme Harsh Environments written by Amanda Schrand and published by CRC Press. This book was released on 2024-06-06 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of future innovative technology relies upon a community with a shared vision. Here, we present an overview of the latest technological progress in the field of printed electronics for use in harsh or extreme environments. Each chapter unlocksscientific and engineering discoveries that will undoubtedly lead to progression from proof of concept to device creation. The main topics covered in this book include some of the most promising materials, methods, and the ability to integrate printed materials with commercial components to provide the basis for the next generation of electronics that are dubbed “survivable” in environments with high g‐orces, corrosion, vibration, and large temperature fluctuations. A wide variety of materials are discussed that contribute to robust hybrid electronics, including printable conductive composite inks, ceramics and ceramic matrix composites, polymer‐erived ceramics, thin metal films, elastomers, solders and epoxies, to name a few. Collectively, these materials and associated components are used to construct conductive traces, interconnects, antennas, pressure sensors, temperature sensors, power inducting devices, strain sensors and gauges, soft actuators, supercapacitors, piezo ionic elements, resistors, waveguides, filters, electrodes, batteries, various detectors, monitoring devices, transducers, and RF systems and graded dielectric, or graded index (GRIN) structures. New designs that incorporate the electronics as embedded materials into channels, slots and other methods to protect the electronics from the extreme elements of the operational environment are also envisioned to increase their survivability while remaining cognizant of the required frequency of replacement, reapplication and integration of power sources. Lastly, the ability of printer manufacturers, software providers and users to work together to build multi‐axis, multi‐material and commercial‐off‐the‐shelf (COTS) integration into user‐friendly systems will be a great advancement for the field of printed electronics. Therefore, the blueprint for manufacturing resilient hybrid electronics consists of novel designs that exploit the benefits of advances in additive manufacturing that are then efficiently paired with commercially available components to produce devices that exceed known constraints. As a primary example, metals can be deposited onto polymers in a variety of ways, including aerosol jetting, microdispensing, electroplating, sintering, vacuum deposition, supersonic beam cluster deposition, and plasma‐based techniques, to name a few. Taking these scientific discoveries and creatively combining them into robotic, multi‐material factories of the future could be one shared aim of the printed electronics community toward survivable device creation.

Download or read book Essentials of RF Front end Design and Testing written by Ibrahim A. Haroun and published by John Wiley & Sons. This book was released on 2023-11-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of RF Front-end Design and Testing Highly comprehensive text delivering the RF system essentials required to understand, develop, and evaluate the performance of RF wireless systems Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a system-oriented book which provides several wireless communication disciplines in one volume. The book covers a wide range of topics, including antenna fundamentals, phased array antenna and MIMOs that are crucial for the latest 5G mmWave and future 6G wireless systems, high-frequency transmission lines, RF building blocks that are necessary to understand how various RF subsystems are interrelated and implemented in wireless systems, and test setups for conducted and Over-The-Air (OTA) transmitter and receiver tests. The text enables readers to understand, develop, and evaluate the performance of RF wireless systems. The text focuses on RF system performance and testing rather than mathematical proofs, which are available in the provided references. Although the book is intended for testing and building RF system prototypes, it has the sufficient theoretical background needed for RF systems design and testing. Each chapter includes learning objectives, review questions, and references. Sample topics covered in the book include: An overview of cellular phone systems, 5G NR wireless technology, MIMO technology, terahertz communications for 6G wireless technology, and modulation and multiplexing Analog and digital modulation techniques, including AM, SSB, FM, FSK, PSK, QAM, SSFH, DSSS, and OFDM High-frequency transmission lines, S-parameters, low-noise amplifier, RF mixers, filters, power amplifiers, frequency synthesizers, circulators/isolators, directional couplers, RF switches, and RF phase shifters Antenna basics, including antenna gain, radiation pattern, input impedance, polarization, and antenna noise temperature; microstrip antenna, antenna array, propagation path loss, compact antenna test range (CATR), and test setups for antenna measurements. Basics of MIMO and beamforming technology, including analog, digital, and hybrid beamforming Test setups for characterizing the key RF performance parameters of 5G New Radio base station transmitters and receivers. Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a highly comprehensive resource on the subject and is intended for graduate engineers and technologists involved in designing, developing, and testing wireless systems, along with undergraduate/graduate students, enhancing their learning experience of RF subsystems/systems characterization.

Download or read book The Second International Adaptive and Sustainable Science Engineering and Technology Conference written by Sunday Cookey Ekpo and published by Springer Nature. This book was released on with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Systems and Industrial Internet of Things for Sustainable Development written by C. Kishor Kumar Reddy and published by CRC Press. This book was released on 2024-05-10 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book studies emerging and sustaining technologies for applications of Industry 5.0 to develop technological solutions to address numerous real-life challenges to solve sustainable development-related issues. It identifies limitations, pitfalls, and open research questions in industry 5.0, discusses real-time problems, and challenges with equivalent solutions with a focus on sustainable growth to develop, humanization and environmentally friendly intelligent system applications. It analyses applications enabled by Industry 5.0 such as healthcare, supply chain, smart framing, remote sensing, production in manufacturing, and cloud manufacturing. It also includes the difficulties and problems posed by the organization between robots and humans on the assembly line to maintain sustainability. Addresses key challenges in implementing intelligent systems in IoT-based applications, including issues ranging from cost and energy efficiency to availability and quality of service Explores the technologies to allow human-machine association and its impact on consumption and sustainability Provides sustainable solutions to emerging industrial problems, especially in healthcare, manufacturing, remote sensing, environmental engineering Examines need for data pre-processing, classification & prediction, Cluster Analysis, Mining Multimedia, Text, and Web Data, Advanced machine learning techniques for scientific programming in Industry Presents success stories in the form of case studies of IIoT, IIoRT, Big Data, Intelligent Systems, Deep Learning in Industry 5.0 era The text is for postgraduate students, professionals, and academic researchers working in the fields of computer science and information technology, especially for professionals and researchers interested in the technological side of sustainable development.

Download or read book Designing Microwave Sensors for Glucose Concentration Detection in Aqueous and Biological Solutions written by Carlos G. Juan and published by Springer Nature. This book was released on 2021-06-14 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive study covering the design and application of microwave sensors for glucose concentration detection, with a special focus on glucose concentration tracking in watery and biological solutions. This book is based on the idea that changes in the glucose concentration provoke variations in the dielectric permittivity of the medium. Sensors whose electrical response is sensitive to the dielectric permittivity of the surrounding media should be able to perform as glucose concentration trackers. At first, this book offers an in-depth study of the dielectric permittivity of water–glucose solutions at concentrations relevant for diabetes purposes; in turn, it presents guidelines for designing suitable microwave resonators, which are then tested in both water–glucose solutions and multi-component human blood plasma solutions for their detection ability and sensitivities. Finally, a portable version is developed and tested on a large number of individuals in a real clinical scenario. All in all, the book reports on a comprehensive study on glucose monitoring devices based on microwave sensors. It covers in depth the theoretical background, provides extensive design guidelines to maximize sensitivity, and validates a portable device for applications in clinical settings.

Download or read book Parallel and Distributed Computing Applications and Technologies written by Ji Su Park and published by Springer Nature. This book was released on 2023-11-28 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Conference on Parallel and Distributed Computing, Applications and Technologies (PDCAT) which was held in Jeju, Korea in August, 2023. The papers of this volume are organized in topical sections on wired and wireless communication systems, high dimensional data representation and processing, networks and information security, computing techniques for efficient networks design, electronic circuits for communication systems.

Download or read book WAMICON 2009 written by and published by . This book was released on 2009 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro and Nanoelectronics Devices Circuits and Systems written by Trupti Ranjan Lenka and published by Springer Nature. This book was released on 2023-10-04 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Micro and Nanoelectronics Devices, Circuits and Systems (MNDCS-2023). The book includes cutting-edge research papers in the emerging fields of micro and nanoelectronics devices, circuits, and systems from experts working in these fields over the last decade. The book is a unique collection of chapters from different areas with a common theme and is immensely useful to academic researchers and practitioners in the industry who work in this field.