Download or read book 2023 4th International Conference on Mechatronics Technology and Intelligent Manufacturing ICMTIM written by IEEE Staff and published by . This book was released on 2023-05-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICMTIM 2023 will focus on academic discussions in the fields of mechatronics technology and intelligent manufacturing The achievements of manufacturing have concentrated many new achievements in science and technology To adapt the growth of computing technology and the level of intelligence, the research of mechatronics engineering and intelligent manufacturing is becoming a topic concern in related industry Researchers and practitioners have been studying more intelligent and efficient ways to help solve practical difficulties The conference also aims to transmit the most advanced technological progress and achievements in mechatronics engineering and intelligent manufacturing
Download or read book 2023 4th International Conference on Mechatronics Technology and Intelligent Manufacturing ICMTIM written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechatronics Technology and Intelligent Manufacturing ICMTIM International Conference On written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2024 3rd International Conference on Structural Seismic Resistance Monitoring and Detection SSRMD 2024 written by ABHIJIT MOHANRAO ZENDE; YONGDING TIAN; LINGKUN CHE. and published by Springer Nature. This book was released on 2024 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Sensing and Robotics Technologies in Smart Agriculture written by Yuliang Yun and published by Springer Nature. This book was released on with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the TEPEN International Workshop on Fault Diagnostic and Prognostic written by Bingyan Chen and published by Springer Nature. This book was released on with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechatronics and Automation Technology written by J.-Y. Xu and published by IOS Press. This book was released on 2024-02-27 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics and automation technology has led to technological change and innovation in all engineering fields, affecting various disciplines, including machine technology, electronics, and computing. It plays a vital role in improving production efficiency, reducing energy consumption and improving product quality and safety, and will be central to the further advancement of technology and industry, bringing convenience and innovation to even more areas. This book presents the proceedings of ICMAT 2023, the 2nd International Conference on Mechatronics and Automation Technology, held as a virtual event on 27 October 2023. The aim of the conference was to provide a platform for scientists, scholars, engineers and researchers from universities and scientific institutes around the world to share the latest research achievements in mechatronics and automation technology, explore key challenges and research directions, and promote the development and application of theory and technology in this field. A total of 121 submissions were received for the conference, of which 77 were ultimately accepted after a rigorous peer-review process. The papers cover a wide range of topics falling within the scope of mechatronics and automation technology, including smart manufacturing; digital manufacturing; additive manufacturing; robotics; sensors; control; electronic and electrical engineering; intelligent systems; and automation technology, as well as other related fields. Providing an overview of recent developments in mechatronics and automation technology, the book will be of interest to all those working in the field.
Download or read book Intelligent Manufacturing Mechatronics written by Roshaliza Hamidon and published by Springer. This book was released on 2024-06-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of SIMM 2023, the fifth edition of the International Symposium on Intelligent Manufacturing and Mechatronics. Focusing on "Towards Empowering Technological Transformation", the book presents studies on the details of technological transformation current trends. Divided into eight parts covering various areas of manufacturing engineering and mechatronics stream, namely intelligent manufacturing, machining technology, mechanical and design, instrumentation and control systems, modelling and simulation, industrial engineering, material, and processing and mechatronics and robotics, the book is a valuable resource for readers wishing to embrace the new era of technological transformation.
Download or read book Parallel Robots written by J.P. Merlet and published by Springer. This book was released on 2000-07-31 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel robots are closed-loop mechanisms presenting very good performances in terms of accuracy, rigidity and ability to manipulate large loads. Parallel robots have been used in a large number of applications ranging from astronomy to flight simulators and are becoming increasingly popular in the field of machine-tool industry. This book presents a complete synthesis of the latest results on the possible mechanical architectures, analysis and synthesis of this type of mechanism. It is intended to be used by students (with over 100 exercises and numerous Internet addresses), researchers (with over 500 references and anonymous ftp access to the code of some algorithms presented in this book) and engineers (for which practical results and applications are presented).
Download or read book Probabilistic Robotics written by Sebastian Thrun and published by MIT Press. This book was released on 2005-08-19 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the techniques and algorithms of the newest field in robotics. Probabilistic robotics is a new and growing area in robotics, concerned with perception and control in the face of uncertainty. Building on the field of mathematical statistics, probabilistic robotics endows robots with a new level of robustness in real-world situations. This book introduces the reader to a wealth of techniques and algorithms in the field. All algorithms are based on a single overarching mathematical foundation. Each chapter provides example implementations in pseudo code, detailed mathematical derivations, discussions from a practitioner's perspective, and extensive lists of exercises and class projects. The book's Web site, www.probabilistic-robotics.org, has additional material. The book is relevant for anyone involved in robotic software development and scientific research. It will also be of interest to applied statisticians and engineers dealing with real-world sensor data.
Download or read book Smart Materials Taxonomy written by Victor Goldade and published by CRC Press. This book was released on 2015-10-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart materials have been categorized employing taxonomical methods used in classification of cybernetics systems. This approach has allowed the systematization of the variety of smart materials (both developed and conceptualized) as well to substantiate the three-stage process of the materials' making. This book proposes a phenomenological model d
Download or read book Fundamentals of Semiconductor Fabrication written by Gary S. May and published by John Wiley & Sons. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This concise introduction to semiconductor fabrication technology covers everything professionals need to know, from crystal growth to integrated devices and circuits. Throughout, the authors address both theory and the practical aspects of each major fabrication step, including crystal growth, silicon oxidation, photolithography, etching, diffusion, ion implantation, and thin film deposition. The book integrates Computer Modeling & Simulation tools throughout. Process simulation is used as a tool for what-if analysis and discussion. Comprehensive coverage of process sequence helps readers connect individual steps into a cohesive whole."--
Download or read book Integration of Fuzzy Logic and Chaos Theory written by Zhong Li and published by Springer. This book was released on 2008-07-21 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1960s were perhaps a decade of confusion, when scientists faced d- culties in dealing with imprecise information and complex dynamics. A new set theory and then an in?nite-valued logic of Lot? A. Zadeh were so c- fusing that they were called fuzzy set theory and fuzzy logic; a deterministic system found by E. N. Lorenz to have random behaviours was so unusual that it was lately named a chaotic system. Just like irrational and imaginary numbers, negative energy, anti-matter, etc., fuzzy logic and chaos were gr- ually and eventually accepted by many, if not all, scientists and engineers as fundamental concepts, theories, as well as technologies. In particular, fuzzy systems technology has achieved its maturity with widespread applications in many industrial, commercial, and technical ?elds, ranging from control, automation, and arti?cial intelligence to image/signal processing,patternrecognition,andelectroniccommerce.Chaos,ontheother hand,wasconsideredoneofthethreemonumentaldiscoveriesofthetwentieth century together with the theory of relativity and quantum mechanics. As a very special nonlinear dynamical phenomenon, chaos has reached its current outstanding status from being merely a scienti?c curiosity in the mid-1960s to an applicable technology in the late 1990s. Finding the intrinsic relation between fuzzy logic and chaos theory is certainlyofsigni?cantinterestandofpotentialimportance.Thepast20years have indeed witnessed some serious explorations of the interactions between fuzzylogicandchaostheory,leadingtosuchresearchtopicsasfuzzymodeling of chaotic systems using Takagi–Sugeno models, linguistic descriptions of chaotic systems, fuzzy control of chaos, and a combination of fuzzy control technology and chaos theory for various engineering practices.
Download or read book Autotuning of PID Controllers written by Cheng-Ching Yu and published by Springer Science & Business Media. This book was released on 2006-05-11 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recognising the benefits of improved control, the second edition of Autotuning of PID Controllers provides simple yet effective methods for improving PID controller performance. The practical issues of controller tuning are examined using numerous worked examples and case studies in association with specially written autotuning MATLAB® programs to bridge the gap between conventional tuning practice and novel autotuning methods. The extensively revised second edition covers: • Derivation of analytical expressions for relay feedback responses. • Shapes of relay responses and improved closed-loop control and performance assessment. • Autotuning for handling process nonlinearity in multiple-model-based cases. • The impact of imperfect actuators on controller performance. This book is more than just a monograph, it is an independent learning tool applicable to the work of academic control engineers and of their counterparts in industry looking for more effective process control and automation.
Download or read book Optical Radiometry written by and published by Elsevier. This book was released on 2005-10-26 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the practice of Optical Radiation Measurements with introductory material to introduce the topics discussed. It will be most useful for students, scientists and engineers working in any academic, industrial or governmental projects related to optical radiation. The book contains chapters that treat in detail the procedures and techniques for the characterization of both sources and detectors to the highest degree of accuracy and reliability. It has a chapter devoted specifically to optical measurements of laser sources and fiberoptics for communication and a chapter devoted to uncertainty in measurement and its treatment with real examples of optical measurements. The book contains introductory materials that will allow a newcomer to radiometry to develop the expertise to perform exacting and accurate measurement. The authors stress the various causes of uncertainty in each phase of a measurement and thus allow for users to arrive at a correct assessment of their uncertainty of measurement in their particular circumstance. · Authors are from the Standards laboratories of AUSTRALIA, CANADA, ENGLAND, GERMANY and the USA. · Latest techniques and practice of laboratory measurements to achieve the highest accuracy in the use of sources or detectors. · Unique illustrations of the apparatus and measurement techniques. · Practical measurement examples of calibration with full uncertainty analysis. · Comprehensive treatment of optical standards such as sources, detectors and radiometers. · A complete chapter on laser power measurements and standards for fiber optic measurements · A complete chapter on correlations in radiometry and practical examples. · A chapter devoted to diffraction effects in radiometry
Download or read book The Mobility Revolution written by Lukas Neckermann and published by Troubador Publishing Ltd. This book was released on 2018-12-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: We stand at the cusp of a mobility revolution unlike anything we have seen since the days of Gottlieb Daimler and Henry Ford, 130 years ago.
Download or read book Verification and Validation in Scientific Computing written by William L. Oberkampf and published by Cambridge University Press. This book was released on 2010-10-14 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in scientific computing have made modelling and simulation an important part of the decision-making process in engineering, science, and public policy. This book provides a comprehensive and systematic development of the basic concepts, principles, and procedures for verification and validation of models and simulations. The emphasis is placed on models that are described by partial differential and integral equations and the simulations that result from their numerical solution. The methods described can be applied to a wide range of technical fields, from the physical sciences, engineering and technology and industry, through to environmental regulations and safety, product and plant safety, financial investing, and governmental regulations. This book will be genuinely welcomed by researchers, practitioners, and decision makers in a broad range of fields, who seek to improve the credibility and reliability of simulation results. It will also be appropriate either for university courses or for independent study.
