Download or read book Power Electronics Radio Frequency and Microwave Engineering written by Raul Gregor and published by BoD – Books on Demand. This book was released on 2023-12-06 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the use of power converter technology has expanded into a wide range of low-, medium-, and high-power applications due to the technology’s capability to efficiently manage electrical energy. In this regard, the high penetration of modern microprocessors capable of implementing high-performance nonlinear digital controllers and the recent advances in the development of high-speed switching power electronic devices, where on-state loss and consequently switching loss of power semiconductors are significantly decreased, have contributed to increased efficiency of the new power converters. As a result, the size of power converters becomes small and the power converters with less heat generation have little environmental stress. Several power converter topologies have been recently proposed in the literature for a variety of emerging applications. These novel converter topologies have different design criteria as well as particularities associated with the digital control system. This book provides a comprehensive overview of the current state of the art and addresses recent breakthroughs in a range of power converter technology, with a special emphasis on design, emerging applications, and control.

Download or read book Multilevel Converters written by Salman Ahmad and published by John Wiley & Sons. This book was released on 2024-07-03 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the deep insights into the operation, modulation, and control strategies of multilevel converters, alongside their recent applications in variable speed drives, renewable energy generation, and power systems. Multilevel converters have gained attention in recent years for medium/high voltage and high power industrial and residential applications. The main advantages of multilevel converters over two level converters include less voltage stress on power semiconductors, low dv/dt, low common voltage, reduced electromagnetic interference, and low total harmonics distortion, among others. Better output power quality is ensured by increasing the number of levels in the synthesized output voltage waveform. Several multilevel topologies have been reported in the literature, such as neutral point clamped (NPC), flying capacitor (FC), cascaded H-bridge (CHB), hybrid cascaded H-bridge, asymmetrical cascaded H-bridge, modular multilevel converters (MMC), active neutral point clamped converters (ANPC), and packed U-cell type converters and various reduced device counts and a reduced number of source-based topologies have been proposed in literature. The multilevel converter, although a proven and enabling technology, still presents numerous challenges in topologies, modulation, and control, as well as in need-based applications. Since multilevel converters offer a wide range of possibilities, research and development in the areas of multilevel converter topologies, modulation, and control in various applications are still growing. To further improve multilevel converter energy efficiency, reliability, power density, and cost, many research groups across the world are working to broaden the application areas of multilevel converters and make them more attractive and competitive compared to classic topologies. Multilevel Converters intends to provide deep insight about multilevel converter operation, modulation, and control strategies and various recent applications of multilevel converters such as in variable speed drives, renewable energy generation, and power systems.

Download or read book Green Hydrogen in Power Systems written by Vahid Vahidinasab and published by Springer Nature. This book was released on with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Systems Operation with 100 Renewable Energy Sources written by Sanjeevikumar Padmanaban and published by Elsevier. This book was released on 2023-11-08 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Systems Operation with 100% Renewable Energy Sources combines fundamental concepts of renewable energy integration into power systems with real-world case studies to bridge the gap between theory and implementation. The book examines the challenges and solutions for renewable energy integration into the transmission and distribution grids, and also provides information on design, analysis and operation. Starting with an introduction to renewable energy sources and bulk power systems, including policies and frameworks for grid upgradation, the book then provides forecasting, modeling and analysis techniques for renewable energy sources. Subsequent chapters discuss grid code requirements and compliance, before presenting a detailed break down of solar and wind integration into power systems. Other topics such as voltage control and optimization, power quality enhancement, and stability control are also considered. Filled with case studies, applications and techniques, Power Systems Operation with 100% Renewable Energy Sources is a valuable read to researchers, students and engineers working towards more sustainable power systems. Explains Volt/Var control and optimization for both transmission grid and distribution Discusses renewable energy integration into the weak grid system, along with its challenges, examples, and case studies Offers simulation examples of renewable energy integration studies that readers will perform using advanced simulation tools Presents recent trends like energy storage systems and demand responses for improving stability and reliability

Download or read book IoT Enabled DC Microgrids written by Imed Ben Dhaou and published by CRC Press. This book was released on 2024-11-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart grid is a new generation of power grids that is expected to enhance its reliability and reduce carbon footprint by integrating distributed resources. Microgrid technology allows the integration of renewable energies, which come in three modes: AC, DC, or hybrid. The increasing number of DC loads, the need to reduce power loss in converting DC power to AC, and the existence of DC storage units have favored the adoption of DC microgrids. The electrification of the transportation sector has further supported the adoption of DC microgrids. A DC microgrid system comprises renewable resources, DC storage elements, DC loads, and intelligent electrical devices. It has gained interest due to its efficiency, scalability, and cost-effectiveness. DC microgrids play a crucial role in powering diverse applications such as data centers, residential areas, base stations, and electric vehicle charging stations. This book covers the design, control, and management of DC microgrids in both islanded and grid-connected modes. It focuses on ICT infrastructure, security, sensors, embedded systems, machine learning algorithms, edge/fog computing, and the socio-economic impact.

Download or read book Transportation Electrification written by Ahmed A. Mohamed and published by John Wiley & Sons. This book was released on 2023-01-05 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transportation Electrification Dive deep into the latest breakthroughs in electrified modes of transport In Transportation Electrification, an accomplished team of researchers and industry experts delivers a unique synthesis of detailed analyses of recent breakthroughs in several modes of electric transportation and a holistic overview of how those advances can or cannot be applied to other modes of transportation. The editors include resources that examine electric aircraft, rolling stock, watercraft, and vehicle transportation types and comparatively determine their stages of development, distinctive and common barriers to advancement, challenges, gaps in technology, and possible solutions to developmental problems. This book offers readers a breadth of foundational knowledge combined with a deep understanding of the issues afflicting each mode of transportation. It acts as a roadmap and policy framework for transportation companies to guide the electrification of transportation vessels. Readers will benefit from an overview of key standards and regulations in the electrified transportation industry, as well as: A thorough introduction to the various modes of electric transportation, including recent advances in each mode, and the technological and policy challenges posed by them An exploration of different vehicle systems, including recent advanced in hybrid and EV powertrain architectures and advanced energy management strategies Discussions of electrified aircraft, including advanced technologies and architecture optimizations for cargo air vehicle, passenger air vehicles, and heavy lift vertical take-off and landing craft In-depth examinations of rolling stock and watercraft-type vehicles, and special vehicles, including various system architectures and energy storage systems relevant to each Perfect for practicing professionals in the electric transport industry, Transportation Electrification is also a must-read resource for standardization body members, regulators, officials, policy makers, and undergraduate students in electrical and electronics engineering.

Download or read book Smart Cities written by Bhisham Sharma and published by CRC Press. This book was released on 2024-08-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive overview of the various services that are available to help cities develop their smart communities. It includes a variety of topics such as artificial intelligence, blockchain, advanced computing, and the Internet of Everything. Smart Cities: Blockchain, AI, and Advanced Computing is structured with independent chapters, each highlighting the current and future state-of-the-art technologies addressing smart city challenges. The book covers a variety of application areas, including healthcare, transportation, smart grids, supply chain management, and financial systems. There are both theoretical and empirical investigations in this book; they cover a wide range of topics related to smart city development and implementation, among others, all of which have a significant impact on the creation of smart cities. This book then examines the state‐of‐the‐art blockchain technology for smart city challenges and programs that might enhance the quality of life in urban areas and encourage cultural and economic growth. This book is written especially for the students, researchers, academicians, and industry professionals looking for initiatives and advancements in technologies with a primary focus on their implications for smart cities.

Download or read book Industry 4 0 Vision for the Supply of Energy and Materials written by Mahdi Sharifzadeh and published by John Wiley & Sons. This book was released on 2022-06-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry 4.0 Vision for the Supply of Energy and Materials Explore the impact of Industry 4.0 technologies on the supply chain with this authoritative text written by a leader in his field In Industry 4.0 Vision for the Supply of Energy and Materials, distinguished researcher and editor, Dr. Mahdi Sharifzadeh, delivers thematic, analytic, and applied discussions of the Industry 4.0 vision for supply chain design and operation. The book compiles all current aspects and emerging notions of Industry 4.0 into clusters of "enablers" and "analytics" of Supply Chain 4.0. Their multifaceted and highly interconnected nature is discussed at length, as are their diverse range of applications. You will discover uses of these new technologies ranging from the supply of conventional energy networks to renewables, pharmaceuticals, and additive manufacturing. You will also learn about their implications for economic prosperity and environmental sustainability. For each sector, this book scrutinizes current industrial practice and discusses developing concepts. Finally, the book concludes with potential future research directions of interest to industry practitioners and academics alike. Readers will also benefit from the inclusion of: A thorough introduction to connectivity through wireless communications and remote sensors An exploration of blockchains and smart contracts, as well as robotics and automation and cloud computing Practical discussions of supply chain analytics, including big data, machine-learning, and artificial intelligence, as well as supply chain modeling, optimization, and control A concise treatment of Industry 4.0 applications in supply chain design and operation, including the circular economy and the power industry An analysis of the oil, gas, and petrochemical industry, the pharmaceutical industry, and additive manufacturing Perfect for PhD-level and Postdoctoral researchers and industrial researchers, Industry 4.0 Vision for the Supply of Energy and Materials will also earn a place in the libraries of working professionals with an interest in the quantitative analysis of Supply Chain 4.0 concepts and techniques.

Download or read book Handbook of Power Electronics in Autonomous and Electric Vehicles written by Muhammad H. Rashid and published by Elsevier. This book was released on 2024-07-22 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Power Electronics in Autonomous and Electric Vehicles provides advanced knowledge on autonomous systems, electric propulsion in electric vehicles, radars and sensors for autonomous systems, and relevant aspects of energy storage and battery charging. The work is designed to provide clear technical presentation with a focus on commercial viability. It supports any and all aspects of a project requiring specialist design, analysis, installation, commissioning and maintenance services. With this book in hand, engineers will be able to execute design, analysis and evaluation of assigned projects using sound engineering principles and commercial requirements, policies, and product and program requirements. - Presents core power systems and engineering applications relevant to autonomous and electric vehicles in characteristic depth and technical presentation - Offers practical support and guidance with detailed examples and applications for laboratory vehicular test plans and automotive field experimentation - Includes modern technical coverage of emergent fields, including sensors and radars, battery charging and monitoring, and vehicle cybersecurity

Download or read book Computational Science ICCS 2023 written by Jiří Mikyška and published by Springer Nature. This book was released on 2023-06-28 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 14073-14077 constitutes the proceedings of the 23rd International Conference on Computational Science, ICCS 2023, held in Prague, Czech Republic, during July 3-5, 2023. The total of 188 full papers and 94 short papers presented in this book set were carefully reviewed and selected from 530 submissions. 54 full and 37 short papers were accepted to the main track; 134 full and 57 short papers were accepted to the workshops/thematic tracks. The theme for 2023, "Computation at the Cutting Edge of Science", highlights the role of Computational Science in assisting multidisciplinary research. This conference was a unique event focusing on recent developments in scalable scientific algorithms, advanced software tools; computational grids; advanced numerical methods; and novel application areas. These innovative novel models, algorithms, and tools drive new science through efficient application in physical systems, computational and systems biology, environmental systems, finance, and others.

Download or read book Soft Computing Applications in Modern Power and Energy Systems written by Krishna Murari and published by Springer Nature. This book was released on 2023-02-18 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides rigorous discussions, case studies, and recent developments in soft computing and its application in power systems enabled with power electronics-based equipment, biomedical engineering, and image processing. The readers would be benefitted from enhancing their knowledge and skills in the domain areas. This book also helps the readers in developing new and innovative ideas.

Download or read book Proceedings of the UNIfied Conference of DAMAS IncoME and TEPEN Conferences UNIfied 2023 written by Andrew D. Ball and published by Springer Nature. This book was released on with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Control Dynamics in Microgrid Systems with Renewable Energy Resources written by Ramesh C. Bansal and published by Academic Press. This book was released on 2023-11-23 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control Dynamics in Microgrid Systems with Renewable Energy Resources looks at complete microgrid systems integrated with renewable energy resources (RERs) such as solar, wind, biomass or fuel cells that facilitate remote applications and allow access to pollution-free energy. Designed and dedicated to providing a complete package on microgrid systems modelling and control dynamics, this book elaborates several aspects of control systems from classical approach to advanced techniques based on artificial intelligence. It captures the typical modes of operation of microgrid systems with distributed energy storage applications like battery, flywheel, electrical vehicles infrastructures that are integrated within microgrids with desired targets. More importantly, the techno-economics of these microgrid systems are well addressed to accelerate the process of achieving the SDG7 i.e., affordable and clean energy for all (E4ALL). This reference presents the latest developments including step by step modelling processes, data security and standards protocol for commissioning of microgrid projects, making this a useful tool for researchers, engineers and industrialists wanting a comprehensive reference on energy systems models. - Includes simulations with case studies and real-world applications of energy system models - Detailed systematic modeling with mathematical analysis is covered - Features possible operating scenarios with solutions to the encountered issues

Download or read book Advanced Information Networking and Applications written by Leonard Barolli and published by Springer Nature. This book was released on 2022-03-30 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the theory, design and applications of computer networks, distributed computing and information systems. Networks of today are going through a rapid evolution, and there are many emerging areas of information networking and their applications. Heterogeneous networking supported by recent technological advances in low-power wireless communications along with silicon integration of various functionalities such as sensing, communications, intelligence and actuations is emerging as a critically important disruptive computer class based on a new platform, networking structure and interface that enable novel, low-cost and high-volume applications. Several of such applications have been difficult to realize because of many interconnections problems. To fulfill their large range of applications, different kinds of networks need to collaborate, and wired and next generation wireless systems should be integrated in order to develop high-performance computing solutions to problems arising from the complexities of these networks. The aim of the book “Advanced Information Networking and Applications” is to provide the latest research findings, innovative research results, methods and development techniques from both theoretical and practical perspectives related to the emerging areas of information networking and applications.

Download or read book Big Data and Security written by Yuan Tian and published by Springer Nature. This book was released on 2023-05-30 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Big Data and Security, ICBDS 2022, held in Xiamen, China, during December 8–12, 2022. The 51 full papers and 3 short papers included in this book were carefully reviewed and selected from 211 submissions. They were organized in topical sections as follows: answer set programming; big data and new method; intelligence and machine learning security; data technology and network security; sybersecurity and privacy; IoT security.

Download or read book Renewable Energy Integration in Utility Grids written by Om Prakash Mahela and published by Elsevier. This book was released on 2024-09-23 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Energy Integration in Utility Grids: Advances in Power Quality, Protection, Stability, and Flexibility reviews current challenges and technologically driven solutions to mitigate the significant issues associated with increasing renewable resource penetration in utility grid networks. It provides a detailed framework to address significant challenges for high renewable energy integration into the utility grid networks, using intelligent techniques and advanced power electronics technology. Chapters address current advances in the grid integration of wind technology, solar PV systems, solar thermal plants, reactive power management, grid stability, variability, power quality, power system protection, generation-side flexibility, demand-side flexibility, smart monitoring and communication, and regulatory frameworks. - Provides a detailed overview of the core challenges faced by utility grids with high renewable energy penetration, together with potential solutions - Amalgamates highly interdisciplinary technical guidance for optimized design, flexible operation, control, and maintenance in renewable-dominated grids - Draws from the contributions of highly-respected global researchers and practitioners, featuring carefully selected case studies reflecting global practice and perspectives - Provides deep insights on many critical issues pertaining to grid-integrated renewable energy, including flexibility, quality, stability, and protection

Download or read book Information Security Practice and Experience written by Chunhua Su and published by Springer Nature. This book was released on 2022-11-18 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th International Conference on Information Security Practice and Experience, ISPEC 2022, held in Taipei, Taiwan, in November 2022. The 33 full papers together with 2 invited papers included in this volume were carefully reviewed and selected from 87 submissions. The main goal of the conference is to promote research on new information security technologies, including their applications and their integration with IT systems in various vertical sectors.