Download or read book 2021 25th International Conference on System Theory Control and Computing ICSTCC written by Lavinia Ferariu and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2021 25th International Conference on System Theory Control and Computing ICSTCC written by IEEE Staff and published by . This book was released on 2021-10-20 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ICSTCC 2021 aims at bringing together under a unique forum, scientists from academia and industry to discuss the state of the art and the new trends in system theory, control and computer engineering, and to present recent research results and prospects for development in this rapidly evolving area The conference will feature several kinds of presentations, including plenary talks, contributed papers, special sessions and contributions from industry, a seminar for young researchers and PhD students and a meeting dedicated to Women in Engineering, Research and Development
Download or read book Advancing Intelligent Networks Through Distributed Optimization written by Rajest, S. Suman and published by IGI Global. This book was released on 2024-08-29 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerous developments in wireless communications and artificial intelligence (AI) have recently transformed the Internet of Things (IoT) networks to a level of connectivity and intelligence beyond any prior design. This topology is sharply exemplified in mobile edge computing, smart cities, smart homes, smart grids, and the IoT, among many other intelligent applications. Intelligent networks are founded on integrating caching and multi-agent systems that optimize data storage and the entire devices learning process. However, a central node through which all agents transmit status messages and reward information is a major drawback of this design pattern. This central node condition instigates more communication overhead, potential data leakage, and the birth of data islands. To reverse this trend, using distributed optimization techniques and methodologies in cache-enabled multi-agent learning environments is increasingly beneficial. Advancing Intelligent Networks Through Distributed Optimization explains the current race for sophisticated and accurate distributed optimization in cache-enabled intelligent IoT networks given the need to make multi-agent learning converge faster and reduce communication overhead. These techniques will require innovative resource allocation strategies stretching from system training to caching, communication, and processing amongst millions of agents. This book combines the key recent research in these races into a single binder that can serve all the interested theoretical and practical scholars. The book focuses broadly on intelligent systems optimization trends. It identifies the various applications of advanced distributed optimization from manufacturing to medicine, agriculture and smart cities.
Download or read book 8th International Conference on Advancements of Medicine and Health Care Through Technology written by Simona Vlad and published by Springer Nature. This book was released on 2024-02-09 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 8th International Conference on Advancements of Medicine and Health Care through Technology, MEDITECH 2022, held virtually on 20–22 October 2022, from Cluj-Napoca, Romania. It reports on both theoretical and practical developments in biomedical imaging and image processing, health technology, technologies for education, and biomedical signal processing and medical devices, measurements and instrumentation. Both the conference and the realization of this book were supported by the Romanian National Society for Medical Engineering and Biological Technology (SNIMTB).
Download or read book Computational Science and Its Applications ICCSA 2022 Workshops written by Osvaldo Gervasi and published by Springer Nature. This book was released on 2022-08-03 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: The eight-volume set LNCS 13375 – 13382 constitutes the proceedings of the 22nd International Conference on Computational Science and Its Applications, ICCSA 2022, which was held in Malaga, Spain during July 4 – 7, 2022. The first two volumes contain the proceedings from ICCSA 2022, which are the 57 full and 24 short papers presented in these books were carefully reviewed and selected from 279 submissions. The other six volumes present the workshop proceedings, containing 285 papers out of 815 submissions. These six volumes includes the proceedings of the following workshops: Advances in Artificial Intelligence Learning Technologies: Blended Learning, STEM, Computational Thinking and Coding (AAILT 2022); Workshop on Advancements in Applied Machine-learning and Data Analytics (AAMDA 2022); Advances in information Systems and Technologies for Emergency management, risk assessment and mitigation based on the Resilience (ASTER 2022); Advances in Web Based Learning (AWBL 2022); Blockchain and Distributed Ledgers: Technologies and Applications (BDLTA 2022); Bio and Neuro inspired Computing and Applications (BIONCA 2022); Configurational Analysis For Cities (CA Cities 2022); Computational and Applied Mathematics (CAM 2022), Computational and Applied Statistics (CAS 2022); Computational Mathematics, Statistics and Information Management (CMSIM); Computational Optimization and Applications (COA 2022); Computational Astrochemistry (CompAstro 2022); Computational methods for porous geomaterials (CompPor 2022); Computational Approaches for Smart, Conscious Cities (CASCC 2022); Cities, Technologies and Planning (CTP 2022); Digital Sustainability and Circular Economy (DiSCE 2022); Econometrics and Multidimensional Evaluation in Urban Environment (EMEUE 2022); Ethical AI applications for a human-centered cyber society (EthicAI 2022); Future Computing System Technologies and Applications (FiSTA 2022); Geographical Computing and Remote Sensing for Archaeology (GCRSArcheo 2022); Geodesign in Decision Making: meta planning and collaborative design for sustainable and inclusive development (GDM 2022); Geomatics in Agriculture and Forestry: new advances and perspectives (GeoForAgr 2022); Geographical Analysis, Urban Modeling, Spatial Statistics (Geog-An-Mod 2022); Geomatics for Resource Monitoring and Management (GRMM 2022); International Workshop on Information and Knowledge in the Internet of Things (IKIT 2022); 13th International Symposium on Software Quality (ISSQ 2022); Land Use monitoring for Sustanability (LUMS 2022); Machine Learning for Space and Earth Observation Data (MALSEOD 2022); Building multi-dimensional models for assessing complex environmental systems (MES 2022); MOdels and indicators for assessing and measuring the urban settlement deVElopment in the view of ZERO net land take by 2050 (MOVEto0 2022); Modelling Post-Covid cities (MPCC 2022); Ecosystem Services: nature’s contribution to people in practice. Assessment frameworks, models, mapping, and implications (NC2P 2022); New Mobility Choices For Sustainable and Alternative Scenarios (NEMOB 2022); 2nd Workshop on Privacy in the Cloud/Edge/IoT World (PCEIoT 2022); Psycho-Social Analysis of Sustainable Mobility in The Pre- and Post-Pandemic Phase (PSYCHE 2022); Processes, methods and tools towards RESilient cities and cultural heritage prone to SOD and ROD disasters (RES 2022); Scientific Computing Infrastructure (SCI 2022); Socio-Economic and Environmental Models for Land Use Management (SEMLUM 2022); 14th International Symposium on Software Engineering Processes and Applications (SEPA 2022); Ports of the future - smartness and sustainability (SmartPorts 2022); Smart Tourism (SmartTourism 2022); Sustainability Performance Assessment: models, approaches and applications toward interdisciplinary and integrated solutions (SPA 2022); Specifics of smart cities development in Europe (SPEED 2022); Smart and Sustainable Island Communities (SSIC 2022); Theoretical and Computational Chemistryand its Applications (TCCMA 2022); Transport Infrastructures for Smart Cities (TISC 2022); 14th International Workshop on Tools and Techniques in Software Development Process (TTSDP 2022); International Workshop on Urban Form Studies (UForm 2022); Urban Regeneration: Innovative Tools and Evaluation Model (URITEM 2022); International Workshop on Urban Space and Mobilities (USAM 2022); Virtual and Augmented Reality and Applications (VRA 2022); Advanced and Computational Methods for Earth Science Applications (WACM4ES 2022); Advanced Mathematics and Computing Methods in Complex Computational Systems (WAMCM 2022).
Download or read book Ergonomics In Design written by Francisco Rebelo and Zihao Wang and published by AHFE International. This book was released on 2023-07-19 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023), July 20–24, 2023, San Francisco, USA
Download or read book Computational Science ICCS 2022 written by Derek Groen and published by Springer Nature. This book was released on 2022-06-21 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 13350, 13351, 13352, and 13353 constitutes the proceedings of the 22ndt International Conference on Computational Science, ICCS 2022, held in London, UK, in June 2022.* The total of 175 full papers and 78 short papers presented in this book set were carefully reviewed and selected from 474 submissions. 169 full and 36 short papers were accepted to the main track; 120 full and 42 short papers were accepted to the workshops/ thematic tracks. *The conference was held in a hybrid format
Download or read book New Trends in Medical and Service Robotics written by Daniela Tarnita and published by Springer Nature. This book was released on 2023-05-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers of the 8th International Workshop on Medical and Service Robots (MESROB) which was held in Craiova, Romania, on June 7-10, 2023. The main topics include: design of medical devices, kinematics and dynamics for medical robotics, exoskeletons and prostheses, anthropomorphic hands, therapeutic robots and rehabilitation, cognitive robots, humanoid and service robots, assistive robots and elderly assistance, surgical robots, human-robot interfaces, haptic devices, medical treatments, medical lasers, and surgical planning and navigation. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists, demonstrating that medical and service robotics will drive the technological and societal change in the coming decades.
Download or read book Proceedings of the Future Technologies Conference FTC 2023 Volume 2 written by Kohei Arai and published by Springer Nature. This book was released on 2023-10-31 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of thoroughly well-researched studies presented at the Eighth Future Technologies Conference. This annual conference aims to seek submissions from the wide arena of studies like Computing, Communication, Machine Vision, Artificial Intelligence, Ambient Intelligence, Security, and e-Learning. With an impressive 490 paper submissions, FTC emerged as a hybrid event of unparalleled success, where visionary minds explored groundbreaking solutions to the most pressing challenges across diverse fields. These groundbreaking findings open a window for vital conversation on information technologies in our community especially to foster future collaboration with one another. We hope that the readers find this book interesting and inspiring and render their enthusiastic support toward it.
Download or read book Advanced Information Networking and Applications written by Leonard Barolli and published by Springer Nature. This book was released on 2021-04-30 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the theory, design and applications of computer networks, distributed computing and information systems. Networks of today are going through a rapid evolution, and there are many emerging areas of information networking and their applications. Heterogeneous networking supported by recent technological advances in low-power wireless communications along with silicon integration of various functionalities such as sensing, communications, intelligence and actuations is emerging as a critically important disruptive computer class based on a new platform, networking structure and interface that enable novel, low-cost and high-volume applications. Several of such applications have been difficult to realize because of many interconnections problems. To fulfill their large range of applications, different kinds of networks need to collaborate, and wired and next-generation wireless systems should be integrated in order to develop high-performance computing solutions to problems arising from the complexities of these networks. The aim of the book “Advanced Information Networking and Applications” is to provide latest research findings, innovative research results, methods and development techniques from both theoretical and practical perspectives related to the emerging areas of information networking and applications.
Download or read book Computational Science ICCS 2021 written by Maciej Paszynski and published by Springer Nature. This book was released on 2021-06-10 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The six-volume set LNCS 12742, 12743, 12744, 12745, 12746, and 12747 constitutes the proceedings of the 21st International Conference on Computational Science, ICCS 2021, held in Krakow, Poland, in June 2021.* The total of 260 full papers and 57 short papers presented in this book set were carefully reviewed and selected from 635 submissions. 48 full and 14 short papers were accepted to the main track from 156 submissions; 212 full and 43 short papers were accepted to the workshops/ thematic tracks from 479 submissions. The papers were organized in topical sections named: Part I: ICCS Main Track Part II: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Artificial Intelligence and High-Performance Computing for Advanced Simulations; Biomedical and Bioinformatics Challenges for Computer Science Part III: Classifier Learning from Difficult Data; Computational Analysis of Complex Social Systems; Computational Collective Intelligence; Computational Health Part IV: Computational Methods for Emerging Problems in (dis-)Information Analysis; Computational Methods in Smart Agriculture; Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems Part V: Computer Graphics, Image Processing and Artificial Intelligence; Data-Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; MeshFree Methods and Radial Basis Functions in Computational Sciences; Multiscale Modelling and Simulation Part VI: Quantum Computing Workshop; Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainty; Teaching Computational Science; Uncertainty Quantification for Computational Models *The conference was held virtually. Chapter “Intelligent Planning of Logistic Networks to Counteract Uncertainty Propagation” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com. The six-volume set LNCS 12742, 12743, 12744, 12745, 12746, and 12747 constitutes the proceedings of the 21st International Conference on Computational Science, ICCS 2021, held in Krakow, Poland, in June 2021.* The total of 260 full papers and 57 short papers presented in this book set were carefully reviewed and selected from 635 submissions. 48 full and 14 short papers were accepted to the main track from 156 submissions; 212 full and 43 short papers were accepted to the workshops/ thematic tracks from 479 submissions. The papers were organized in topical sections named: Part I: ICCS Main Track Part II: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Artificial Intelligence and High-Performance Computing for Advanced Simulations; Biomedical and Bioinformatics Challenges for Computer Science Part III: Classifier Learning from Difficult Data; Computational Analysis of Complex Social Systems; Computational Collective Intelligence; Computational Health Part IV: Computational Methods for Emerging Problems in (dis-)Information Analysis; Computational Methods in Smart Agriculture; Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems Part V: Computer Graphics, Image Processing and Artificial Intelligence; Data-Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; MeshFree Methods and Radial Basis Functions in Computational Sciences; Multiscale Modelling and Simulation Part VI: Quantum Computing Workshop; Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainty; Teaching Computational Science; Uncertainty Quantification for Computational Models *The conference was held virtually. Chapter “Intelligent Planning of Logistic Networks to Counteract Uncertainty Propagation” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com. Chapter: Modelling and Forecasting Based on Recurrent Pseudoinverse Matrices” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Advances in Service and Industrial Robotics written by Andreas Müller and published by Springer Nature. This book was released on 2022-04-22 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 31st International Conference on Robotics in Alpe-Adria-Danube Region (RAAD), held in Klagenfurt, Austria, June 8-10, 2022. It gathers contributions by researchers from several countries on all major areas of robotic research, development and innovation, as well as new applications and current trends. The topics covered include: novel designs and applications of robotic systems, intelligent cooperating and service robots, advanced robot control, human-robot interfaces, robot vision systems, mobile robots, humanoid and walking robots, bio-inspired and swarm robotic systems, aerial, underwater and spatial robots, robots for ambient assisted living, medical robots and bionic prostheses, cognitive robots, cloud robotics, ethical and social issues in robotics, etc. Given its scope, the book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments. Chapter “The Use of Robots in Aquatic Biomonitoring with Special Focus on Biohybrid Entities” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Interactive Collaborative Robotics written by Andrey Ronzhin and published by Springer Nature. This book was released on 2023-09-04 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th International Conference on Interactive Collaborative Robotics, ICR 2023, held in Baku, Azerbaijan, during October 25–29, 2023. The 33 full papers included in this book were carefully reviewed and selected from 56 submissions. They were organized in topical sections as follows: focused the foundations and means of collaborative behavior of one or more robots physically interacting with hu-mans in operational environments configured with embedded sensor networks and cloud services under uncertainty and environmental variability.
Download or read book Proceedings of Congress on Control Robotics and Mechatronics written by Pradeep Kumar Jha and published by Springer Nature. This book was released on 2023-11-09 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features high-quality research papers presented at the International Conference of Mechanical and Robotic Engineering “Congress on Control, Robotics, and Mechatronics” (CRM 2023), jointly organized by Modi Institute of Technology, Kota, India, and Soft Computing Research Society, India, during 25–26 March 2023. This book discusses the topics such as combustion and fuels, controls and dynamics, fluid mechanics, I.C. engines and automobile engineering, machine design, mechatronics, rotor dynamics, solid mechanics, thermodynamics and combustion engineering, composite material, aerodynamics, aerial vehicles, missiles and robots, automatic design and manufacturing, artificial intelligence, unmanned aerial vehicles, autonomous robotic vehicles, evolutionary robotics, humanoids, hardware architecture, industrial robotics, intelligent control systems, microsensors and actuators, multi-robots systems, neural decoding algorithms, neural networks for mobile robots, space robotics, control theory and applications, model predictive control, variable structure control, and decentralized control.
Download or read book Sustainable Economic Growth Green Deal and Macroeconomic Recovery Most Suitable Pathways to Recovering From the Actual Evolutionary Hiatus written by Alexandru Bodislav and published by Frontiers Media SA. This book was released on 2023-09-07 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enterprise Design Operations and Computing EDOC 2022 Workshops written by Tiago Prince Sales and published by Springer Nature. This book was released on 2023-02-23 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the international workshops, the EDOC Forum and the Demonstration and Doctoral Consortium track, that were held at the 26th International Conference on Enterprise Design, Operations, and Computing, EDOC 2022. The conference took place in Bozen-Bolzano, Italy, during October 3–7, 2022. The conference focuses on the area of enterprise computing, this year with the special emphasis on the theme of designing and operating “Flexible Enterprises”. Workshops within EDOC cover more focused topics and allow for the presentation and discussion of work that is in the earlier development stages. The 18 full and 8 short papers included in this volume were carefully reviewed and selected from 82 submissions. They stem from the following satellite events: – Workshop on Intelligent Digital Architecture, Methods, and Services for Industry 4.0 and Society 5.0 (IDAMS) – 14th Workshop on Service-oriented Enterprise Architecture for Enterprise Engineering (SoEA4EE) – 17th Workshop on Trends in Enterprise Architecture Research (TEAR) – EDOC Forum – Demonstrations Track – Doctoral Consortium
Download or read book Artificial Intelligence Applications and Innovations AIAI 2021 IFIP WG 12 5 International Workshops written by Ilias Maglogiannis and published by Springer Nature. This book was released on 2021-06-26 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of six International Workshops held as parallel events of the 17th IFIP WG 12.5 International Conference on Artificial Intelligence Applications and Innovations, AIAI 2021, virtually and in Hersonissos, Crete, Greece, in June 2021: the 6th Workshop on 5G-Putting Intelligence to the Network Edge, 5G-PINE 2021; Artificial Intelligence in Biomedical Engineering and Informatics Workshop, AI-BIO 2021; Workshop on Defense Applications of AI, DAAI 2021; Distributed AI for Resource-Constrained Platforms Workshop, DARE 2021; Energy Efficiency and Artificial Intelligence Workshop, EEAI 2021; and the 10th Mining Humanistic Data Workshop, MHDW 2021. The 24 full papers and 16 short papers presented at these workshops were carefully reviewed and selected from 72 submissions. The papers presented at 5G-PINE focus on the latest AI applications in the telecommunication industry and AI in modern 5G-oriented telecommunications infrastructures. The papers chosen for AI-BIO 2021 present research on the subject of AI, in its broadest sense, in biomedical engineering and health informatics. The DAAI 2021 papers aim at presenting recent evolutions in artificial intelligence applicable to defense and security applications. The papers selected for DARE 2021 address a variety of pertinent and challenging topics within the scope of distributed AI for resource-constrained platforms. The papers presented at EEAI 2021 aim to bring together interdisciplinary approaches that focus on the application of AI-driven solutions for increasing and improving energy efficiency of residential and tertiary buildings and of occupant behavior. The MHDW papers focus on topics such as recommendation systems, sentiment analysis, pattern recognition, data mining, and time series.
