Download or read book 15th European Workshop on Advanced Control and Diagnosis ACD 2019 written by Elena Zattoni and published by Springer Nature. This book was released on 2022-06-13 with total page 1441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, published in two volumes, embodies the proceedings of the 15th European Workshop on Advanced Control and Diagnosis (ACD 2019) held in Bologna, Italy, in November 2019. It features contributed and invited papers from academics and professionals specializing in an important aspect of control and automation. The book discusses current theoretical research developments and open problems and illustrates practical applications and industrial priorities. With a focus on both theory and applications, it spans a wide variety of up-to-date topics in the field of systems and control, including robust control, adaptive control, fault-tolerant control, control reconfiguration, and model-based diagnosis of linear, nonlinear and hybrid systems. As the subject coverage has expanded to include cyber-physical production systems, industrial internet of things and sustainability issues, some contributions are of an interdisciplinary nature, involving ICT disciplines and environmental sciences. This book is a valuable reference for both academics and professionals in the area of systems and control, with a focus on advanced control, automation, fault diagnosis and condition monitoring.

Download or read book Control and Inverse Problems written by Kaïs Ammari and published by Springer Nature. This book was released on 2023-09-26 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a timely overview of control theory and inverse problems, and highlights recent advances in these active research areas. The chapters are based on talks given at the spring school "Control & Inverse Problems” held in Monastir, Tunisia in May 2022. In addition to providing a snapshot of these two areas, chapters also highlight breakthroughs on more specific topics, such as: Controllability of dynamical systems Information transfer in multiplier equations Nonparametric instrumental regression Control of chained systems The damped wave equation Control and Inverse Problems will be a valuable resource for both established researchers as well as more junior members of the community.

Download or read book Proceedings of 19th Latin American Control Congress LACC 2022 written by Orestes Llanes-Santiago and published by Springer Nature. This book was released on 2023-05-09 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main results of the 19th Latin American Congress of Automatic Control held in November 2022 in Havana, Cuba. The Congress showed several main research results obtained by researchers from diverse countries in the last four years. Of the papers sent to Congress, 28 were finally accepted for presentation after a rigorous analysis of scientific novelty and quality. For their presentation in this book, the papers were divided into 5 major sections that appear in the following order: Part 1. Robust and Nonlinear Control The main research topics addressed in this part are related to fault-tolerant control loops, control by sliding modes, and robust tuning of PID controllers. Examples of electrical motors and chemical processes are used to demonstrate the feasibility of using the proposed techniques. Part 2. Fault Diagnosis in Industrial Systems Fault diagnosis in industrial plants is a very important topic in the Industry 4.0 paradigm. In this part, new techniques of fault diagnosis in mechanical systems using Poincaré features; a real case study for predicting the time of the remaining job cycle at a water treatment plant; and a predictive fault diagnosis for isolated photovoltaic systems are presented. A novel methodology for detecting and locating cyber-attacks in water distribution networks using computational intelligence tools is also presented. Part 3. Robotic and Autonomous Systems New control strategies for path following for autonomous tractors and unmanned aquatic vehicles are analyzed in this part. Moreover, the important topic related to the battery health-aware model predictive control planning for autonomous racing vehicles and the use of robots for monitoring and remediation applications are examined. Part 4. Modeling, Identification, and Delayed Systems A model-based methodology for the efficient selection of centrifugal pumps; the use of probabilistic Boolean networks in smart grid models; the utilization of PSO metaheuristic algorithm in the selection of a model structure; and two schemes to control high-order delayed systems are among the main topics examined in this part. Part 5. Low-Cost Systems and Biomedical Applications In this part, some applications of low-cost monitoring and control systems and two automatic systems used for the characterization of creatinine in wastes samples during hemodialysis process and differential acquisition of blood pressure are shown.

Download or read book Control Strategy for Time Delay Systems written by Mohammad-Hassan Khooban and published by Academic Press. This book was released on 2020-11-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Strategy for Time-Delay Systems Part I: Concepts and Theories covers all the important features of real-world practical applications which will be valuable to practicing engineers and specialists, especially given that delays are present in 99% of industrial processes. The book presents the views of the editors on promising research directions and future industrial applications in this area. Although the fundamentals of time-delay systems are discussed, the book focuses on the advanced modeling and control of such systems and will provide the analysis and test (or simulation) results of nearly every technique described. For this purpose, highly complex models are introduced to ?describe the mentioned new applications, which are characterized by ?time-varying delays with intermittent and stochastic nature, several types of nonlinearities, and the presence ?of different time-scales. Researchers, practitioners, and PhD students will gain insights into the prevailing trends in design and operation of real-time control systems, reviewing the shortcomings and future developments concerning practical system issues, such as standardization, protection, and design. - Presents an overview of the most recent trends for time-delay systems - Covers the important features of the real-world practical applications that can be valuable to practicing engineers and specialists - Provides analysis and simulations results of the techniques described in the book

Download or read book Aerial Robotic Workers written by George Nikolakopoulos and published by Butterworth-Heinemann. This book was released on 2022-11-05 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial Robotic Workers: Design, Modeling, Control, Vision and Their Applications provides an in-depth look at both theory and practical applications surrounding the Aerial Robotic Worker (ARW). Emerging ARWs are fully autonomous flying robots that can assist human operations through their agile performance of aerial inspections and interaction with the surrounding infrastructure. This book addresses all the fundamental components of ARWs, starting with the hardware and software components and then addressing aspects of modeling, control, perception of the environment, and the concept of aerial manipulators, cooperative ARWs, and direct applications. The book includes sample codes and ROS-based tutorials, enabling the direct application of the chapters and real-life examples with platforms already existing in the market. - Addresses the fundamental problems of UAVs with the ability of utilizing aerial tools in the fields of modeling, control, navigation, cooperation, vision and interaction with the environment - Includes open source codes and libraries, providing a complete set of information for readers to start their experimentation with UAVs, and more specifically, ARWs - Provides multiple, real-life examples and codes in MATLAB and ROS

Download or read book Machine Learning Approaches to Human Movement Analysis written by Matteo Zago and published by Frontiers Media SA. This book was released on 2021-03-04 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pattern Recognition ICPR International Workshops and Challenges written by Alberto Del Bimbo and published by Springer Nature. This book was released on 2021-03-04 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 8-volumes set constitutes the refereed of the 25th International Conference on Pattern Recognition Workshops, ICPR 2020, held virtually in Milan, Italy and rescheduled to January 10 - 11, 2021 due to Covid-19 pandemic. The 416 full papers presented in these 8 volumes were carefully reviewed and selected from about 700 submissions. The 46 workshops cover a wide range of areas including machine learning, pattern analysis, healthcare, human behavior, environment, surveillance, forensics and biometrics, robotics and egovision, cultural heritage and document analysis, retrieval, and women at ICPR2020.

Download or read book Computer Aided Verification written by Shuvendu K. Lahiri and published by Springer Nature. This book was released on 2020-07-15 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: The open access two-volume set LNCS 12224 and 12225 constitutes the refereed proceedings of the 32st International Conference on Computer Aided Verification, CAV 2020, held in Los Angeles, CA, USA, in July 2020.* The 43 full papers presented together with 18 tool papers and 4 case studies, were carefully reviewed and selected from 240 submissions. The papers were organized in the following topical sections: Part I: AI verification; blockchain and Security; Concurrency; hardware verification and decision procedures; and hybrid and dynamic systems. Part II: model checking; software verification; stochastic systems; and synthesis. *The conference was held virtually due to the COVID-19 pandemic.

Download or read book Leveraging Applications of Formal Methods Verification and Validation Rigorous Engineering of Collective Adaptive Systems written by Tiziana Margaria and published by Springer Nature. This book was released on with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Spark Ignition Engine Modeling and Control System Design written by Amir-Mohammad Shamekhi and published by CRC Press. This book was released on 2023-02-22 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step guide to the engine control system design, providing case studies and a thorough analysis of the modeling process using machine learning, and model predictive control (MPC). Covering advanced processes alongside the theoretical foundation, MPC enables engineers to improve performance in both hybrid and non-hybrid vehicles. Control system improvement is one of the major priorities for engineers seeking to enhance an engine. Often possible on a low budget, substantial improvements can be made by applying cutting-edge methods, such as artificial intelligence when modeling engine control system designs and using MPC. This book presents approaches to control system improvement at mid, low, and high levels of control. Beginning with the model-in-the-loop hierarchical control design of ported fuel injection SI engines, this book focuses on optimal control of both transient and steady state and also discusses hardware-in-the-loop. The chapter on low-level control discusses adaptive MPC and adaptive variable functioning, as well as designing a fuel injection feed-forward controller. At mid-level control, engine calibration maps are discussed, with consideration of constraints such as limits on pollutant emissions. Finally, the high-level control methodology is discussed in detail in relation to transient torque control of SI engines. This comprehensive yet clear guide to control system improvement is an essential read for any engineer working in automotive engineering and engine control system design.

Download or read book Human Robot Interaction written by Ramana Vinjamuri and published by BoD – Books on Demand. This book was released on 2023-05-10 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Human-Robot Interaction - Perspectives and Applications highlights the latest developments and obstacles in the field of human-machine interaction, including collaborative and humanoid robots, symbiosis between humans and robots, human-human collaboration, and robotics. Human-robot interaction has immense potential in areas like healthcare, education, manufacturing, military, and space exploration. This volume consists of several chapters that explore various topics such as the use of robotic wheelchairs, deep neural networks for robot grasp recognition, materials and sensors required for human-robot interaction, the use of drone technology in agriculture, healthcare robots in smart hospitals, and more.

Download or read book Safety Security and Privacy for Cyber Physical Systems written by Riccardo M.G. Ferrari and published by Springer Nature. This book was released on 2021-06-08 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth overview of recent work related to the safety, security, and privacy of cyber-physical systems (CPSs). It brings together contributions from leading researchers in networked control systems and closely related fields to discuss overarching aspects of safety, security, and privacy; characterization of attacks; and solutions to detecting and mitigating such attacks. The book begins by providing an insightful taxonomy of problems, challenges and techniques related to safety, security, and privacy for CPSs. It then moves through a thorough discussion of various control-based solutions to these challenges, including cooperative fault-tolerant and resilient control and estimation, detection of attacks and security metrics, watermarking and encrypted control, privacy and a novel defense approach based on deception. The book concludes by discussing risk management and cyber-insurance challenges in CPSs, and by presenting the future outlook for this area of research as a whole. Its wide-ranging collection of varied works in the emerging fields of security and privacy in networked control systems makes this book a benefit to both academic researchers and advanced practitioners interested in implementing diverse applications in the fields of IoT, cooperative autonomous vehicles and the smart cities of the future.

Download or read book I D for Smart Cities and Industry written by Marcelo Zambrano Vizuete and published by Springer Nature. This book was released on 2022-08-01 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Second International Conference on Technological Research - RITAM 2021. RITAM 2021 was held on October 27–29, 2021. It was jointly supported and co-organized by the RITAM Research Network (Sucre, Central Técnico, Turismo y Patrimonio YAVIRAC, Luis Napoleón Dillon, Conservatorio Superior Nacional de Música, Luis A Martínez, Paulo Emilio Macías, La Maná, Luis A Martínez Agronómico Loja, Primero de Mayo, Jaime Roldós Aguilera, Cotacachi, Alfonso Herrera) and GDEON. RITAM aims to provide a forum for discussion and the dissemination of results from R&D projects that have been developed both within and outside of Ecuador over the last few years.

Download or read book Control of Variable Geometry Vehicle Suspensions written by Balázs Németh and published by Springer Nature. This book was released on 2023-07-08 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough and fresh treatment of the control of innovative variable-geometry vehicle suspension systems. A deep survey on the topic, which covers the varying types of existing variable-geometry suspension solutions, introduces the study. The book discusses three important aspects of the subject: • robust control design; • nonlinear system analysis; and • integration of learning and control methods. The importance of variable-geometry suspensions and the effectiveness of design methods implemented in the autonomous functionalities of electric vehicles—functionalities like independent steering and torque vectoring—are illustrated. The authors detail the theoretical background of modeling, control design, and analysis for each functionality. The theoretical results achieved through simulation examples and hardware-in-the-loop scenarios are confirmed. The book highlights emerging ideas of applying machine-learning-based methods in the control system with guarantees on safety performance. The authors propose novel control methods, based on the theory of robust linear parameter-varying systems, with examples for various suspension systems. Academic researchers interested in automotive systems and their counterparts involved in industrial research and development will find much to interest them in the eleven chapters of Control of Variable-Geometry Vehicle Suspensions.

Download or read book Intelligent Computing written by Kohei Arai and published by Springer Nature. This book was released on 2023-08-19 with total page 1492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of extremely well-articulated, insightful and unique state-ofthe-art papers presented at the Computing Conference which took place in London on June 22–23, 2023. A total of 539 papers were received out of which 193 were selected for presenting after double-blind peer-review. The book covers a wide range of scientific topics including IoT, Artificial Intelligence, Computing, Data Science, Networking, Data security and Privacy, etc. The conference was successful in reaping the advantages of both online and offline modes. The goal of this conference is to give a platform to researchers with fundamental contributions and to be a premier venue for academic and industry practitioners to share new ideas and development experiences. We hope that readers find this book interesting and valuable. We also expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject.

Download or read book Advances in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2024-05-08 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Maritime Technology and Engineering comprises a collection of the papers presented at the 7th International Conference on Maritime Technology and Engineering (MARTECH 2024) held in Lisbon, Portugal, on 14-16 May 2024. This Conference has evolved from the series of biannual national conferences in Portugal, which have become an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2024 is the seventh of this new series of biannual conferences. This book comprises 142 contributions that were reviewed by an International Scientific Committee. Advances in Maritime Technology and Engineering is dedicated to maritime transportation, ports as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair. The Proceedings in Marine Technology and Ocean Engineering series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of “Marine Technology and Ocean Engineering”. The series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The “Marine Technology and Ocean Engineering” series is also open to new conferences that cover topics on the sustainable exploration of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and is resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Download or read book Formal Modeling and Analysis of Timed Systems written by Catalin Dima and published by Springer Nature. This book was released on 2021-08-16 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 19th International Conference on Formal Modeling and Analysis of Timed Systems, FORMATS 2021, held in Paris, France, in August 2021. The 8 full papers that were carefully reviewed and selected from 19 submissions are presented in this volume with 2 invited talks. The papers focus on topics such as probabilistic computation, logic and verification, robotic planning, complexity of timed pattern matching, safety violations in real-time systems, modal and temporal logics, and others.