Download or read book 7th International Conference on Computing Control and Industrial Engineering CCIE 2023 written by Yuriy S. Shmaliy and published by Springer Nature. This book was released on 2023-07-24 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected aspects of recent advances and experiences, emerging technology trends that have positively impacted our world from operators, authorities, and associations from CCIE 2022, to help address the world’s advanced computing, control technology, information technology, artificial intelligence, machine learning, deep learning, and neural networks. Meanwhile, the topics included in the proceedings have high research value and present current insights, developments, and trends in computing, control, and industrial engineering.

Download or read book 2017 Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium EFTF IFC written by IEEE Staff and published by . This book was released on 2017-07-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference is an international conference and exhibition, providing information on recent advances and trends of scientific research and industrial development in the fields of precision Frequency and Time

Download or read book EFTF IFCS 2017 written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MEMS Sensors and Resonators written by Frederic Nabki and published by MDPI. This book was released on 2020-05-27 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) have had a profound impact on a wide range of applications. The degree of miniaturization made possible by MEMS technology has significantly improved the functionalities of many systems, and the performance of MEMS has steadily improved as its uses augment. Notably, MEMS sensors have been prevalent in motion sensing applications for decades, and the sensing mechanisms leveraged by MEMS have been continuously extended to applications spanning the detection of gases, magnetic fields, electromagnetic radiation, and more. In parallel, MEMS resonators have become an emerging field of MEMS and affected subfields such as electronic timing and filtering, and energy harvesting. They have, in addition, enabled a wide range of resonant sensors. For many years now, MEMS have been the basis of various industrial successes, often building on novel academic research. Accordingly, this Special Issue explores many research innovations in MEMS sensors and resonators, from biomedical applications to energy harvesting, gas sensing, resonant sensing, and timing.

Download or read book An Introduction to Modern Timekeeping and Time Transfer written by Parameswar Banerjee and published by Springer Nature. This book was released on 2023-10-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive, systematic description of modern timekeeping and its specializations. Introductory chapters discuss the concept of time and its definition, then briefly look at pre-Atomic Era timekeeping to set the stage for the introduction of the atomic clock. Subsequent chapters focus on concepts such as frequency stability and measurement uncertainty, as well as computer network time-synchronization protocols including Network Time Protocol (NTP) and Precise Time Protocol (PTP). The book then delves into the nuts and bolts of the Global Navigation Satellite Systems (GNSS), Two-Way Satellite Time and Frequency Transfer, and Optical Time and Frequency Transfer. Timescale theory is then described as a way to combine clock data, and the algorithms and procedures used to generate Coordinated Universal Time (UTC) are given. Finally, there is a look at modern applications of timekeeping and time transfer. Featuring a glossary of all key terms, this book is highly recommended for trained or incoming physicists, engineers, or mathematicians working, for example, in manufacturing or timing laboratories. Additionally, it is suitable for use in introductory university courses dealing with the subject of timekeeping.

Download or read book Metrology from Physics Fundamentals to Quality of Life written by P. Tavella and published by IOS Press. This book was released on 2018-01-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is a constantly evolving field, and one which has developed in many ways in the last four decades. This book presents the proceedings of the Enrico Fermi Summer School on the topic of Metrology, held in Varenna, Italy, from 26 June to 6 July 2017. This was the 6th Enrico Fermi summer school devoted to metrology, the first having been held in 1976. The 2017 program addressed two major new directions for metrology: the work done in preparation for a possible re-definition of four of the base units of the SI in 2018, and the impact of the application of metrology to issues addressing quality of life – such as global climate change and clinical and food analysis – on science, citizens and society. The lectures were grouped into three modules: metrology for quality of life; fundamentals of metrology; and physical metrology and fundamental constants, and topics covered included food supply and safety; biomarkers; monitoring climate and air quality; new IS units; measurement uncertainty; fundamental constants; electrical metrology; optical frequency standards; and photometry and light metrology. The book provides an overview of the topics and changes relevant to metrology today, and will be of interest to both academics and all those whose work involves any of the various aspects of this field.

Download or read book Nonlinear Waves written by Emmanuel Kengne and published by Springer Nature. This book was released on 2023-02-23 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the methods to engineer dissipative and magnetic nonlinear waves propagating in nonlinear systems. In the first part of the book, the authors present methodologically mathematical models of nonlinear waves propagating in one- and two-dimensional nonlinear transmission networks without/with dissipative elements. Based on these models, the authors investigate the generation and the transmission of nonlinear modulated waves, in general, and solitary waves, in particular, in networks under consideration. In the second part of the book, the authors develop basic theoretical results for the dynamics matter-wave and magnetic-wave solitons of nonlinear systems and of Bose–Einstein condensates trapped in external potentials, combined with the time-modulated nonlinearity. The models treated here are based on one-, two-, and three-component non-autonomous Gross–Pitaevskii equations. Based on the Heisenberg model of spin–spin interactions, the authors also investigate the dynamics of magnetization in ferromagnet with or without spin-transfer torque. This research book is suitable for physicists, mathematicians, engineers, and graduate students in physics, mathematics, and network and information engineering.

Download or read book 3D and Circuit Integration of MEMS written by Masayoshi Esashi and published by John Wiley & Sons. This book was released on 2021-03-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore heterogeneous circuit integration and the packaging needed for practical applications of microsystems MEMS and system integration are important building blocks for the “More-Than-Moore” paradigm described in the International Technology Roadmap for Semiconductors. And, in 3D and Circuit Integration of MEMS, distinguished editor Dr. Masayoshi Esashi delivers a comprehensive and systematic exploration of the technologies for microsystem packaging and heterogeneous integration. The book focuses on the silicon MEMS that have been used extensively and the technologies surrounding system integration. You’ll learn about topics as varied as bulk micromachining, surface micromachining, CMOS-MEMS, wafer interconnection, wafer bonding, and sealing. Highly relevant for researchers involved in microsystem technologies, the book is also ideal for anyone working in the microsystems industry. It demonstrates the key technologies that will assist researchers and professionals deal with current and future application bottlenecks. Readers will also benefit from the inclusion of: A thorough introduction to enhanced bulk micromachining on MIS process, including pressure sensor fabrication and the extension of MIS process for various advanced MEMS devices An exploration of epitaxial poly Si surface micromachining, including process condition of epi-poly Si, and MEMS devices using epi-poly Si Practical discussions of Poly SiGe surface micromachining, including SiGe deposition and LP CVD polycrystalline SiGe A concise treatment of heterogeneously integrated aluminum nitride MEMS resonators and filters Perfect for materials scientists, electronics engineers, and electrical and mechanical engineers, 3D and Circuit Integration of MEMS will also earn a place in the libraries of semiconductor physicists seeking a one-stop reference for circuit integration and the practical application of microsystems.

Download or read book Piezoelectric Sensors written by Peter Lieberzeit and published by Springer Nature. This book was released on with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metrology for Inclusive Growth of India written by Dinesh K. Aswal and published by Springer Nature. This book was released on 2020-11-09 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the significance of metrology for inclusive growth in India and explains its application in the areas of physical–mechanical engineering, electrical and electronics, Indian standard time measurements, electromagnetic radiation, environment, biomedical, materials and Bhartiya Nirdeshak Dravyas (BND®). Using the framework of “Aswal Model”, it connects the metrology, in association with accreditation and standards, to the areas of science and technology, government and regulatory agencies, civil society and media, and various other industries. It presents critical analyses of the contributions made by CSIR-National Physical Laboratory (CSIR-NPL), India, through its world-class science and apex measurement facilities of international equivalence in the areas of industrial growth, strategic sector growth, environmental protection, cybersecurity, sustainable energy, affordable health, international trade, policy-making, etc. The book will be useful for science and engineering students, researchers, policymakers and entrepreneurs.

Download or read book Quantum Precision Measurement and Cold Atom Physics written by Jingbiao Chen and published by Frontiers Media SA. This book was released on 2022-09-23 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the invention of the cesium atomic clock in 1955, quantum frequency standards have seen considerable development over the decades, as a representative of quantum precision measurement. The progress in frequency measurements achieved in the past allowed one to perform quantum precision measurements of other physical and technical quantities with unprecedented precision, whenever they could be traced back to a frequency measurement. Using atomic transitions as frequency reference, quantum frequency standards are far less susceptible to external perturbations, and the identity of microscopic particles allows easy replication of a quantum standard with the same frequency. With laser cooling and trapping, cold atomic ensembles eliminate Doppler shift broadening, and have become the go-to quantum reference when precision and new physics are pursued. The advancement of laser cooling and cold atom physics, in addition to novel physical matter states such as Bose-Einstein Condensation, give rise to new experimental techniques in quantum precision measurement, especially quantum frequency standards, such as cesium fountain clocks dictating the SI second, as well as optical lattice clocks and single-ion optical clocks pushing the frontier of quantum metrology. Other areas of quantum metrology, such as gravitometers and magnetometers, also benefit greatly from cold atoms. For practical applications, quantum frequency standards are usually required to be compact and portable, and thermal atoms in the form of atomic beams or vapor cells are utilized. Commercially available quantum frequency standards such as cesium beam clocks or rubidium clocks have become the cornerstone of navigation and timekeeping. Compact optical clocks based on various laser spectroscopic techniques have also been developed. As researchers strive to break through the limits of accurate quantum measurement and atomic temperature, new fields such as precise measurement, quantum computing and quantum simulation based on cold atoms are further opened up, and challenges still exist to explore new physical phenomena in the field of cold atoms. In honor of Prof. Yiqiu Wang on the occasion of his 90th birthday, the main goal of this Research Topic is to provide a platform to exhibit the recent achievements and reveal the future challenges in quantum precision measurement, as well as studies of cold atom physics with quantum metrology, closely related to the long-term scientific research areas of Prof. Yiqiu Wang. Both Original Research and Review articles are encouraged. Topics of interest to this collection include, but are not limited to: • Quantum precision measurements • Microwave atomic clocks and their applications • Optical frequency standards, laser spectroscopy, and their applications • Quantum measurement based on cold atom • Quantum computation and quantum simulation based on cold atom

Download or read book Microwave Cavities and Detectors for Axion Research written by Gianpaolo Carosi and published by Springer Nature. This book was released on 2020-07-20 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nature of dark matter remains one of the preeminent mysteries in physics and cosmology. It appears to require the existence of new particles whose interactions with ordinary matter are extraordinarily feeble. One well-motivated candidate is the axion, an extraordinarily light neutral particle that may possibly be detected by looking for their conversion to detectable microwaves in the presence of a strong magnetic field. This has led to a number of experimental searches that are beginning to probe plausible axion model space and may reveal the axion in the near future. These proceedings discuss the challenges of designing and operating tunable resonant cavities and detectors at ultralow temperatures. The topics discussed here have potential application far beyond the field of dark matter detection and may be applied to resonant cavities for accelerators as well as designing superconducting detectors for quantum information and computing applications. This work is intended for graduate students and researchers interested in learning the unique requirements for designing and operating microwave cavities and detectors for direct axion searches and to introduce several proposed experimental concepts that are still in the prototype stage.

Download or read book Biomedical Electronics Noise Shaping ADCs and Frequency References written by Pieter Harpe and published by Springer Nature. This book was released on 2023-06-22 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 30th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, with specific contributions focusing on analog circuits for machine learning, current/voltage/temperature sensors, and high-speed communication via wireless, wireline, or optical links. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book The Turn of Moore s Law from Space to Time written by Liming Xiu and published by Springer Nature. This book was released on 2022-05-24 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book states that a space-induced crisis is recognized as the cause of trouble that Moore’s Law is currently facing. The contemporary practice of this empirical law can be considered as happening within a space-dominant paradigm. An alternative of exploiting potential in the dimension of time is identified as an emerging paradigm in microelectronics. The new practice is termed a time-oriented paradigm. It is justified as the turn of Moore’s Law from space to time. The resultant Time-Moore strategy is envisioned as the next-generation enabler for continuing Moore’s Law’s pursuit of everhigher information processing power and efficiency. It also serves as the perpetuation of the spirit that Moore’s law is nothing but a collective storied history of innovations. In the first part of this book, by following Thomas Kuhn’s seminal work around the concepts of paradigm and scientific revolution, the argument for the Time-Moore strategy (Time-Moore: to use time more) and the paradigm shift from space to time is carried out heavily through philosophical persuasion rather than technical proof due to the difficult challenge of change-of-mindset. The second part of the book provides solid technical materials for supporting this transition from the old paradigm to the new one. In short, the goal of this book is to reevaluate the contemporary practice of microelectronics, identify the cause of the current crisis, advocate a change-of-mindset to circumvent the crisis, and ultimately point out a new route for advancing. After achieving so many unprecedented accomplishments through several decades of relentless endeavor, it’s time for the big ship of Moore’s Law (i.e., the art of microelectronic system design) to make a turn.

Download or read book Advanced Ceramics for Energy Storage Thermoelectrics and Photonics written by Peng Cao and published by Elsevier. This book was released on 2023-04-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Ceramics for Energy Storage, Thermoelectrics and Photonics describes recent progress in ceramic synthesis and applications in the areas of rechargeable batteries, capacitors, fuel cells, ferroelectrics, thermoelectrics, and inorganic luminescence materials. Both fundamental scientific advancements and technological breakthroughs in terms of new ceramic chemistries, new synthesis methodologies, and new applications are discussed in detail. The latest developments in advanced electrodes, ionic conductors, catalysts, thermoelectric ceramics, and luminescent powders/ceramics and their applications are also covered. With its focus on energy-related applications, the book will be a valuable reference resource for new researchers, academics, and postgraduate students who are interested in delving deeper into energy-related materials research, in particular, the areas of electronic and optical ceramics and their potential applications. - Covers three key areas of ceramics science: electrochemical energy conversion, thermoelectrics, and photonics - An entire section that explains the fundamental theory that lies behind new ceramic chemistries and synthesis methodologies - Complex perspectives are explained, such as solid electrolytes and the coupling between thermal and electric phenomena and optical properties as well as electrodes, ionic conductors, catalysts, thermoelectric ceramics and their applications - Discusses challenges that new ceramic technology is currently facing and the potential solutions for commercial success

Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.

Download or read book 2013 Joint European Frequency and Time Forum International Frequency Control Symposium EFTF IFC 2013 written by and published by . This book was released on 2013 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: