Download or read book 2017 IEEE ACM 21st International Symposium on Distributed Simulation and Real Time Applications DS RT written by IEEE Staff and published by . This book was released on 2017-10-18 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2017 IEEE ACM International Symposium on Distributed Simulation and Real Time Applications (DS RT 2017) serves as a platform for simulationists from academia, industry and research labs for presenting recent research results in Distributed Simulation and Real Time Applications DS RT 2017 targets the growing overlap between large distributed simulations and real time applications, such as collaborative virtual environments, pervasive and ubiquitous application scenarios, motor, controller, sensor and actuator based systems The conference features prominent invited speakers as well as papers by top researchers in the field DS RT 2017 will include contributed technical papers, invited papers, and panel discussions The proceedings will be published by IEEE CS press The IEEE ACM DS RT is at its 21st edition and it represents a major appointment for the distributed simulation community

Download or read book Broadband Communications Networks and Systems written by Wei Wang and published by Springer Nature. This book was released on 2023 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 13th EAI International Conference on Broadband Communications, Networks, and Systems, Broadnets 2022, which took place in March 2023. Due to COVID-19 pandemic the conference was held virtually. The 9 full papers presented were carefully reviewed and selected from 23 submissions. The papers are thematically grouped as follows: Mobile Communication Networks; Mobile Software Security; and Algorithm, Model and Application. The scope of this conference is the 5G-enabled digital society.

Download or read book High Performance Computing written by Isidoro Gitler and published by Springer Nature. This book was released on 2022-04-11 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers of the 8th Latin American High Performance Computing Conference, CARLA 2021, held in Guadalajara, Mexico, in October 2021. Due to the COVID-19 pandemic the conference was held in a virtual mode. The 16 revised full papers and 2 short papers presented were carefully reviewed and selected out of 45 submissions. The papers included in this book are organized according to the topics on ​high performance computing; high performance computing and artificial intelligence; high performance computing applications.

Download or read book Wireless Networks and Industrial IoT written by Nurul Huda Mahmood and published by Springer Nature. This book was released on 2020-12-11 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the most relevant research and standardization results in the area of wireless networking for Industrial IoT, covering both critical and massive connectivity. Most chapters in this book are intended to serve as short tutorials of particular topics, highlighting the main developments and ideas, as well as giving an outlook of the upcoming research challenges. The book is divided into four parts. The first part focuses on challenges, enablers and standardization efforts for reliable low-latency communication in Industrial IoT networks. The next part focuses on massive IoT, which requires cost- and energy-efficient technology components to efficiently connect a massive number of low-cost IoT devices. The third part covers three enabling technologies in the context of Industrial IoT: Security, Machine Learning/Artificial Intelligence and Edge Computing. These enablers are applicable to both connectivity types, critical and massive IoT. The last part covers aspects of Industrial IoT related to connected transportation that are important in, for example, warehouse and port logistics, product delivery and transportation among industries. Presents a comprehensive guide to concepts and research challenges in wireless networking for Industrial IoT; Includes an introduction and overview of such topics as 3GPP standardization for Industrial IoT, Time Sensitive Networking, system dependability over wireless networks, energy-efficient wireless networks, IoT security, ML/AI for Industrial IoT and connected transportation systems; Features contributions by well-recognized experts from both academia and industry.

Download or read book Social Behavioral Modeling for Complex Systems written by Paul K. Davis and published by John Wiley & Sons. This book was released on 2019-04-09 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes frontiers in social-behavioral modeling for contexts as diverse as national security, health, and on-line social gaming. Recent scientific and technological advances have created exciting opportunities for such improvements. However, the book also identifies crucial scientific, ethical, and cultural challenges to be met if social-behavioral modeling is to achieve its potential. Doing so will require new methods, data sources, and technology. The volume discusses these, including those needed to achieve and maintain high standards of ethics and privacy. The result should be a new generation of modeling that will advance science and, separately, aid decision-making on major social and security-related subjects despite the myriad uncertainties and complexities of social phenomena. Intended to be relatively comprehensive in scope, the volume balances theory-driven, data-driven, and hybrid approaches. The latter may be rapidly iterative, as when artificial-intelligence methods are coupled with theory-driven insights to build models that are sound, comprehensible and usable in new situations. With the intent of being a milestone document that sketches a research agenda for the next decade, the volume draws on the wisdom, ideas and suggestions of many noted researchers who draw in turn from anthropology, communications, complexity science, computer science, defense planning, economics, engineering, health systems, medicine, neuroscience, physics, political science, psychology, public policy and sociology. In brief, the volume discusses: Cutting-edge challenges and opportunities in modeling for social and behavioral science Special requirements for achieving high standards of privacy and ethics New approaches for developing theory while exploiting both empirical and computational data Issues of reproducibility, communication, explanation, and validation Special requirements for models intended to inform decision making about complex social systems

Download or read book Multi Agent Systems written by Vadim Malvone and published by Springer Nature. This book was released on 2023-09-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume LNCS 14282 constitutes the refereed proceedings of the 20th European Conference EUMAS 2023, held in Naples, Italy, during September 2023. This volume includes 24 full papers and 5 short papers, carefully selected from 47 submissions. Additionally, the volume features 16 short papers, rigorously reviewed from 20 submissions for the PhD day. The conference focused on the theory and practice of autonomous agents and multi-agent systems, covering a wide range of topics.

Download or read book Computational Methods and Experimental Measurements XX written by S. Hernández and published by WIT Press. This book was released on 2021-07-26 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formed of papers presented at the 20th International Conference on Computational Methods and Experimental Measurements, this volume provides a view of the latest work on the interaction between computational methods and experiments. The continuous improvement in computer efficiency, coupled with diminishing costs and the rapid development of numerical procedures have generated an ever-increasing expansion of computational simulations that permeate all fields of science and technology. As these procedures continue to grow in magnitude and complexity, it is essential to validate their results to be certain of their reliability. This can be achieved by performing dedicated and accurate experiments, which have undergone constant and enormous development. At the same time, current experimental techniques have become more complex and sophisticated so that they require the intensive use of computers, both for running experiments as well as acquiring and processing the resulting data. Some of the subject areas covered are Fluid flow studies and experiments; Structural and stress analysis; Materials characterization; Electromagnetic problems; Structural integrity; Destructive and non-destructive testing; Heat transfer and thermal processes; Advances in computational methods; Automotive applications; Aerospace applications; Ocean engineering and marine structures; Fluid-structure interaction; Bio-electromagnetics; Process simulations; Environmental monitoring, modelling and applications; Validation of computer modelling; Data and signal processing; Virtual testing and verification; Electromagnetic compatibility; Life cycle assessment.

Download or read book Advanced Information Networking and Applications written by Leonard Barolli and published by Springer Nature. This book was released on 2021-04-26 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book covers the theory, design and applications of computer networks, distributed computing and information systems. Networks of today are going through a rapid evolution, and there are many emerging areas of information networking and their applications. Heterogeneous networking supported by recent technological advances in low-power wireless communications along with silicon integration of various functionalities such as sensing, communications, intelligence and actuations is emerging as a critically important disruptive computer class based on a new platform, networking structure and interface that enable novel, low-cost and high-volume applications. Several of such applications have been difficult to realize because of many interconnections problems. To fulfill their large range of applications, different kinds of networks need to collaborate, and wired and next-generation wireless systems should be integrated in order to develop high-performance computing solutions to problems arising from the complexities of these networks. The aim of the book “Advanced Information Networking and Applications” is to provide latest research findings, innovative research results, methods and development techniques from both theoretical and practical perspectives related to the emerging areas of information networking and applications.

Download or read book Numerical Infinities and Infinitesimals in Optimization written by Yaroslav D. Sergeyev and published by Springer Nature. This book was released on 2022-07-05 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a friendly introduction to the paradigm and proposes a broad panorama of killing applications of the Infinity Computer in optimization: radically new numerical algorithms, great theoretical insights, efficient software implementations, and interesting practical case studies. This is the first book presenting to the readers interested in optimization the advantages of a recently introduced supercomputing paradigm that allows to numerically work with different infinities and infinitesimals on the Infinity Computer patented in several countries. One of the editors of the book is the creator of the Infinity Computer, and another editor was the first who has started to use it in optimization. Their results were awarded by numerous scientific prizes. This engaging book opens new horizons for researchers, engineers, professors, and students with interests in supercomputing paradigms, optimization, decision making, game theory, and foundations of mathematics and computer science. “Mathematicians have never been comfortable handling infinities... But an entirely new type of mathematics looks set to by-pass the problem... Today, Yaroslav Sergeyev, a mathematician at the University of Calabria in Italy solves this problem... ” MIT Technology Review “These ideas and future hardware prototypes may be productive in all fields of science where infinite and infinitesimal numbers (derivatives, integrals, series, fractals) are used.” A. Adamatzky, Editor-in-Chief of the International Journal of Unconventional Computing. “I am sure that the new approach ... will have a very deep impact both on Mathematics and Computer Science.” D. Trigiante, Computational Management Science. “Within the grossone framework, it becomes feasible to deal computationally with infinite quantities, in a way that is both new (in the sense that previously intractable problems become amenable to computation) and natural”. R. Gangle, G. Caterina, F. Tohmé, Soft Computing. “The computational features offered by the Infinity Computer allow us to dynamically change the accuracy of representation and floating-point operations during the flow of a computation. When suitably implemented, this possibility turns out to be particularly advantageous when solving ill-conditioned problems. In fact, compared with a standard multi-precision arithmetic, here the accuracy is improved only when needed, thus not affecting that much the overall computational effort.” P. Amodio, L. Brugnano, F. Iavernaro & F. Mazzia, Soft Computing

Download or read book Computational Science ICCS 2021 written by Maciej Paszynski and published by Springer Nature. This book was released on 2021-06-10 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The six-volume set LNCS 12742, 12743, 12744, 12745, 12746, and 12747 constitutes the proceedings of the 21st International Conference on Computational Science, ICCS 2021, held in Krakow, Poland, in June 2021.* The total of 260 full papers and 57 short papers presented in this book set were carefully reviewed and selected from 635 submissions. 48 full and 14 short papers were accepted to the main track from 156 submissions; 212 full and 43 short papers were accepted to the workshops/ thematic tracks from 479 submissions. The papers were organized in topical sections named: Part I: ICCS Main Track Part II: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Artificial Intelligence and High-Performance Computing for Advanced Simulations; Biomedical and Bioinformatics Challenges for Computer Science Part III: Classifier Learning from Difficult Data; Computational Analysis of Complex Social Systems; Computational Collective Intelligence; Computational Health Part IV: Computational Methods for Emerging Problems in (dis-)Information Analysis; Computational Methods in Smart Agriculture; Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems Part V: Computer Graphics, Image Processing and Artificial Intelligence; Data-Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; MeshFree Methods and Radial Basis Functions in Computational Sciences; Multiscale Modelling and Simulation Part VI: Quantum Computing Workshop; Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainty; Teaching Computational Science; Uncertainty Quantification for Computational Models *The conference was held virtually. Chapter “Intelligent Planning of Logistic Networks to Counteract Uncertainty Propagation” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com. The six-volume set LNCS 12742, 12743, 12744, 12745, 12746, and 12747 constitutes the proceedings of the 21st International Conference on Computational Science, ICCS 2021, held in Krakow, Poland, in June 2021.* The total of 260 full papers and 57 short papers presented in this book set were carefully reviewed and selected from 635 submissions. 48 full and 14 short papers were accepted to the main track from 156 submissions; 212 full and 43 short papers were accepted to the workshops/ thematic tracks from 479 submissions. The papers were organized in topical sections named: Part I: ICCS Main Track Part II: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Artificial Intelligence and High-Performance Computing for Advanced Simulations; Biomedical and Bioinformatics Challenges for Computer Science Part III: Classifier Learning from Difficult Data; Computational Analysis of Complex Social Systems; Computational Collective Intelligence; Computational Health Part IV: Computational Methods for Emerging Problems in (dis-)Information Analysis; Computational Methods in Smart Agriculture; Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems Part V: Computer Graphics, Image Processing and Artificial Intelligence; Data-Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; MeshFree Methods and Radial Basis Functions in Computational Sciences; Multiscale Modelling and Simulation Part VI: Quantum Computing Workshop; Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainty; Teaching Computational Science; Uncertainty Quantification for Computational Models *The conference was held virtually. Chapter “Intelligent Planning of Logistic Networks to Counteract Uncertainty Propagation” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com. Chapter: Modelling and Forecasting Based on Recurrent Pseudoinverse Matrices” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Intelligent Transportation Systems ITS written by Beatriz L. Boada and published by MDPI. This book was released on 2021-04-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents collective works published in the recent Special Issue (SI) entitled " Intelligent Transportation Systems (ITS)". These works address problems of mobility, environmental pollution, and road safety, as well as their related applications. The presented problems are complex and involve a large number of research areas and many advanced technologies, such as communication, sensing, and control, which are used for managing a large amount of information. The applications vary and include fleet management, driving behavior, traffic control, trajectory planning, connected vehicles, and energy consumption efficiency. Recent advances in communication technologies are becoming fundamental for the development of new advances in fleet management, traffic control, and connected vehicles. This works collected in this Special Issue propose solution methodologies to address such challenges, analyze the proposed methodologies, and evaluate their performance. This book brings together a collection of multidisciplinary works applied to ITS applications in a coherent manner.

Download or read book Simulation for Cyber Physical Systems Engineering written by José L. Risco Martín and published by Springer Nature. This book was released on 2020-11-07 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book examines a range of examples, prepared by a diverse group of academic and industry practitioners, which demonstrate how cloud-based simulation is being extensively used across many disciplines, including cyber-physical systems engineering. This book is a compendium of the state of the art in cloud-based simulation that instructors can use to inform the next generation. It highlights the underlying infrastructure, modeling paradigms, and simulation methodologies that can be brought to bear to develop the next generation of systems for a highly connected society. Such systems, aptly termed cyber-physical systems (CPS), are now widely used in e.g. transportation systems, smart grids, connected vehicles, industrial production systems, healthcare, education, and defense. Modeling and simulation (M&S), along with big data technologies, are at the forefront of complex systems engineering research. The disciplines of cloud-based simulation and CPS engineering are evolving at a rapid pace, but are not optimally supporting each other’s advancement. This book brings together these two communities, which already serve multi-disciplinary applications. It provides an overview of the simulation technologies landscape, and of infrastructure pertaining to the use of cloud-based environments for CPS engineering. It covers the engineering, design, and application of cloud simulation technologies and infrastructures applicable for CPS engineering. The contributions share valuable lessons learned from developing real-time embedded and robotic systems deployed through cloud-based infrastructures for application in CPS engineering and IoT-enabled society. The coverage incorporates cloud-based M&S as a medium for facilitating CPS engineering and governance, and elaborates on available cloud-based M&S technologies and their impacts on specific aspects of CPS engineering.

Download or read book Unmanned Aerial Vehicles written by Carlos Tavares Calafate and published by MDPI. This book was released on 2020-12-29 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of unmanned aerial vehicles (UAVs) plays an important role in supporting human activities. Man is concentrating more and more on intellectual work, and trying to automate practical activities as much as possible in order to increase their efficiency. In this regard, the use of drones is increasingly becoming a key aspect of this automation process, offering many advantages, including agility, efficiency and reduced risk, especially in dangerous missions. Hence, this Special Issue focuses on applications, platforms and services where UAVs can be used as facilitators for the task at hand, also keeping in mind that security should be addressed from its different perspectives, ranking from communications security to operational security, and furthermore considering privacy issues.

Download or read book Sustainable Intelligent Systems written by Amit Joshi and published by Springer Nature. This book was released on 2021-03-06 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses issues related to ICT, intelligent systems, data science, AI, machine learning, sustainable development and overall their impacts on sustainability. It provides an overview of the technologies of future. The book also discusses novel intelligent algorithms and their applications to move from a data-centric world to sustainable world. It includes research paradigms on sustainable development goals and societal impacts. The book provides an overview of cutting-edge techniques toward sustainability and ideas to help researchers who want to understand the challenges and opportunities of using smart management perspective for sustainable society. It serves as a reference to wide ranges of readers from computer science, data analysts, AI technocrats and management researchers.

Download or read book Numerical Computations Theory and Algorithms written by Yaroslav D. Sergeyev and published by Springer Nature. This book was released on 2020-02-13 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 11973 and 11974 constitute revised selected papers from the Third International Conference on Numerical Computations: Theory and Algorithms, NUMTA 2019, held in Crotone, Italy, in June 2019. This volume, LNCS 11974, consists of 19 full and 32 short papers chosen among regular papers presented at the the Conference including also the paper of the winner (Lorenzo Fiaschi, Pisa, Italy) of The Springer Young Researcher Prize for the best NUMTA 2019 presentation made by a young scientist. The papers in part II explore the advanced research developments in such interconnected fields as local and global optimization, machine learning, approximation, and differential equations. A special focus is given to advanced ideas related to methods and applications using emerging computational paradigms.

Download or read book Digital Technologies and Applications written by Saad Motahhir and published by Springer Nature. This book was released on with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book PROCEEDINGS OF THE 23RD CONFERENCE ON FORMAL METHODS IN COMPUTER AIDED DESIGN FMCAD 2023 written by Alexander Nadel and published by TU Wien Academic Press. This book was released on 2023-10-13 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference on Formal Methods in Computer-Aided Design (FMCAD) is an annual conference on the theory and applications of formal methods in hardware and system in academia and industry for presenting and discussing groundbreaking methods, technologies, theoretical results, and tools for reasoning formally about computing systems. FMCAD covers formal aspects of computer-aided system testing.