Download or read book Photovoltaic Solar Energy Conversion written by Shiva Gorjian and published by Academic Press. This book was released on 2020-07-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic Solar Energy Conversion - Technologies, Applications and Environmental Impacts features comprehensive and up-to-date knowledge on the photovoltaic solar energy conversion technology and describes its different aspects in the context of most recent scientific and technological advances. It also provides an insight into future developments in this field by covering four distinct topics include "PV Cells and Modules", "Applications of PV Systems", "Life Cycle and Environmental Impacts" and "PV Market and Policies". An up-to-date reference book on the advances of photovoltaic solar energy conversion technology Describes different aspects of PV and PVT technologies in a comprehensive way Provides information on design, development, and monitoring of PV systems Covers applications of PV and PVT systems in the urban, industry, and agriculture sectors Features new concepts, environmental impacts, market and policies of the PV technology

Download or read book 2017 IEEE 44th Photovoltaic Specialist Conference PVSC written by IEEE Staff and published by . This book was released on 2017-06-25 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: scientific and engineering technical conference covering all aspects of photovoltaics materials, devices, systems and reliability

Download or read book Modelling and Optimization of Photovoltaic Cells Modules and Systems written by Carlos David Rodríguez Gallegos and published by Springer Nature. This book was released on 2021-04-28 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a study to determine the current limitations in the area of Photovoltaics (PV) as a source of renewable energy and proposes strategies to overcome them by applying optimization approaches in three main areas, namely related to photovoltaic solar cells, modules, and systems. These include grid metallization design of Si-based solar cells and modules; cost-effectiveness analysis between Si-based monofacial and bifacial grid-connected PV systems; optimal diesel replacement strategy for the progressive introduction of PV and batteries; dispatch strategy optimization for PV hybrid systems in real time. The novelty of the work presented in this book is of high interest to the scientific community but also to the PV manufacturers, installation companies, and investors.

Download or read book Renewable Energy for Sustainable Growth Assessment written by Nayan Kumar and published by John Wiley & Sons. This book was released on 2022-04-05 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: RENEWABLE ENERGY FOR SUSTAINABLE GROWTH ASSESSMENT Written and edited by a team of experts in the field, this collection of papers reflects the most up-to-date and comprehensive current state of renewable energy for sustainable growth assessment and provides practical solutions for engineers and scientists. Renewable energy resources (RERs) are gaining more attention in academia and industry as one of the preferred choices of sustainable energy conversion. Due to global energy demand, environmental impacts, economic needs and social issues, RERs are encouraged and even funded by many governments around the world. Today, researchers are facing numerous challenges as this field emerges and develops, but, at the same time, new opportunities are waiting for RERs utilization in sustainable development all over the globe. Efficient energy conversion of solar, wind, biomass, fuel cells, and other techniques are gaining more popularity and are the future of energy. The present book cross-pollinates recent advances in the study of renewable energy for sustainable growth. Various applications of RERs, modeling and performance analysis, grid integration, soft computing, optimization, artificial intelligence (AI) as well as machine and deep learning aspects of RERs are extensively covered. Whether for the veteran engineer or scientist, the student, or a manager or other technician working in the field, this volume is a must-have for any library. This outstanding new volume Assesses the current and future need for energy on a global scale and reviews the role of renewable energy Includes multiple chapters on biomass and bioenergy Also includes multiple chapters on solar energy and PVs Also includes chapters on fuel cells, wind power, and many other topics Covers the design and implementation of power electronics for energy systems Outlines best practices and the state of the art for renewable energy with regard to sustainability Audience: Engineers, scientists, technicians, managers, students, and faculty working in the field of renewable energy, sustainability and power system

Download or read book High Efficient Low Cost Photovoltaics written by Vesselinka Petrova-Koch and published by Springer Nature. This book was released on 2019-11-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a bird’s-eye view of the recent development trends in photovoltaics – a big business field that is rapidly growing and well on its way to maturity. The book describes current efforts to develop highly efficient, low-cost photovoltaic devices based on crystalline silicon, III–V compounds, copper indium gallium selenide (CIGS) and perovskite photovoltaic cells along with innovative, cost-competitive glass/ flexible tubular glass concentrator modules and systems, highlighting recent attempts to develop highly efficient, low-cost, flexible photovoltaic cells based on CIGS and perovskite thin films. This second edition presents, for the first time, the possible applications of perovskite modules together with Augsburger Tubular photovoltaics.

Download or read book Durability and Reliability of Polymers and Other Materials in Photovoltaic Modules written by Hsinjin Edwin Yang and published by William Andrew. This book was released on 2019-06-14 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability and Reliability of Polymers and Other Materials in Photovoltaic Modules describes the durability and reliability behavior of polymers used in Si-photovoltaic modules and systems, particularly in terms of physical aging and degradation process/mechanisms, characterization methods, accelerated exposure chamber and testing, module level testing, and service life prediction. The book compares polymeric materials to traditional materials used in solar applications, explaining the degradation pathways of the different elements of a photovoltaic module, including encapsulant, front sheet, back sheet, wires and connectors, adhesives, sealants, and more. In addition, users will find sections on the tests needed for the evaluation of polymer degradation and aging, as well as accelerated tests to aid in materials selection. As demand for photovoltaics continues to grow globally, with polymer photovoltaics offering significantly lower production costs compared to earlier approaches, this book will serve as a welcome resource on new avenues.

Download or read book Impedance Source Inverters written by Hongpeng Liu and published by Springer Nature. This book was released on 2020-01-13 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on impedance source inverters, discussing their classification, advantages, topologies, analysis methods, working mechanisms, improvements, reliability, and applications. It summarizes methods for suppressing DC-link voltage spikes and duty loss, which can pose a problem for researchers; and presents novel, efficient, steady state and transient analysis methods that are of significant practical value, along with specific calculation examples. Further, the book addresses the reliability of impedance source inverters, adopting a methodology from reliability engineering to do so. Given its scope, it offers a valuable resource for researchers, engineers, and graduate students in fields involving impedance source inverters and new energy sources.

Download or read book Photovoltaic Solar Energy written by Wilfried van Sark and published by John Wiley & Sons. This book was released on 2024-07-29 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic Solar Energy Thoroughly updated overview of photovoltaic technology, from materials to modules and systems Volume 2 of Photovoltaic Solar Energy provides fundamental and contemporary knowledge about various photovoltaic technologies in the framework of material science, device physics of solar cells, chemistry for manufacturing, engineering of PV modules, and the design aspects of photovoltaic applications, with the aim of informing the reader about the basic knowledge of each aspect of photovoltaic technologies and applications in the context of the most recent advances in science and engineering. The text is written by leading specialists for each topic in a concise manner and includes the most recent references for deeper study. Moreover, the book gives insights into possible future developments in the field of photovoltaics. The book builds on the success of Volume 1 of Photovoltaic Solar Energy, which was published by Wiley in January 2017. As science and technology is progressing fast in some areas of photovoltaics, several topics needed to be readdressed. Volume 2 also covers some basic aspects of the subject that were not addressed in Volume 1. Sample topics covered in Photovoltaic Solar Energy include: Solar Irradiance Resources Crystalline Silicon Technologies (Cz Ingots, TOPCon, Heterojunction, Passivating contacts, Hydrogenation and Carrier Induced Degradation) Perovskite and Tandem solar cells Characterization and Measurements PV Modules PV Systems and Applications (integration in buildings, agriculture, water, vehicles) Sustainability Providing comprehensive coverage of the subject, Photovoltaic Solar Energy is an essential resource for undergraduate and graduate students in science or engineering, young professionals in PV research or the PV industry, professors, teachers, and PV specialists who want to receive updated information. A scientific or engineering degree is a prerequisite.

Download or read book Proceedings of the 7th International Conference on Electrical Control and Computer Engineering Volume 1 written by Zainah Md. Zain and published by Springer Nature. This book was released on with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Step by Step Design of Large Scale Photovoltaic Power Plants written by Davood Naghaviha and published by John Wiley & Sons. This book was released on 2022-01-12 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to design a solar power plant, from start to finish In Step-by-Step Design of Large-Scale Photovoltaic Power Plants, a team of distinguished engineers delivers a comprehensive reference on PV power plants—and their design—for specialists, experts, and academics. Written in three parts, the book covers the detailed theoretical knowledge required to properly design a PV power plant. It goes on to explore the step-by-step requirements for creating a real-world PV power plant, including parts and components design, mathematical formulations and calculations, analyses, evaluations, and planning. The book concludes with a discussion of a sample solar plant design, as well as tips on how to avoid common design mistakes, and how to handle the operation and maintenance of PV power plants. Step-by-Step Design of Large-Scale Photovoltaic Power Plants also includes: Thorough introductions to the basic requirements of design, economic analyses, and investment revenue Comprehensive explorations of the requirements for feasibility study and grid connection study Introducing solar resource, and determining optimum tilt angle and module inter-row spacing Presenting methodology for design of large-scale PV plant, requirements of engineering document, and optimal design algorithm In-depth examinations for selecting PV module, inverter, string, and DC side equipment Practical discussions of system losses, as well as estimation of yearly electrical energy production, capacity factor, and performance ratio of large-scale PV plant Perfect for professionals in the solar power industry, Step-by-Step Design of Large-Scale Photovoltaic Power Plants will also earn a place in the libraries of equipment manufacturers and university professors seeking a one-stop resource for the design of PV power plants.

Download or read book Emerging Converter Topologies and Control for Grid Connected Photovoltaic Systems written by Dmitri Vinnikov and published by MDPI. This book was released on 2021-02-26 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous cost reduction of photovoltaic (PV) systems and the rise of power auctions resulted in the establishment of PV power not only as a green energy source but also as a cost-effective solution to the electricity generation market. Various commercial solutions for grid-connected PV systems are available at any power level, ranging from multi-megawatt utility-scale solar farms to sub-kilowatt residential PV installations. Compared to utility-scale systems, the feasibility of small-scale residential PV installations is still limited by existing technologies that have not yet properly address issues like operation in weak grids, opaque and partial shading, etc. New market drivers such as warranty improvement to match the PV module lifespan, operation voltage range extension for application flexibility, and embedded energy storage for load shifting have again put small-scale PV systems in the spotlight. This Special Issue collects the latest developments in the field of power electronic converter topologies, control, design, and optimization for better energy yield, power conversion efficiency, reliability, and longer lifetime of the small-scale PV systems. This Special Issue will serve as a reference and update for academics, researchers, and practicing engineers to inspire new research and developments that pave the way for next-generation PV systems for residential and small commercial applications.

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book Modelling Simulation and Intelligent Computing written by Nilesh Goel and published by Springer Nature. This book was released on 2020-07-28 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from the International Conference on Modelling, Simulation and Intelligent Computing (MoSICom 2020), held at Birla Institute of Technology and Science Pilani, Dubai Campus, Dubai, UAE, in January 2020. Modelling and simulation are becoming increasingly important in a wide variety of fields, from Signal, Image and Speech Processing, and Microelectronic Devices and Circuits to Intelligent Techniques, Control and Energy Systems, and Power Electronics. Further, Intelligent Computational techniques are gaining significance in interdisciplinary engineering applications, such as Robotics and Automation, Healthcare Technologies, IoT and its Applications. Featuring the latest advances in the field of engineering applications, this book serves as a definitive reference resource for researchers, professors and practitioners interested in exploring advanced techniques in the field of modelling, simulation and computing.

Download or read book Photovoltaics for Space written by Sheila G. Bailey and published by Elsevier. This book was released on 2022-10-26 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: PV has traditionally been used for electric power in space. Solar panels on spacecraft are usually the sole source of power to run the sensors, active heating and cooling, and communications. Photovoltaics for Space: Key Issues, Missions and Alternative Technologies provides an overview of the challenges to efficiently produce solar power in near-Earth space and beyond: the materials and device architectures that have been developed to surmount these environmental and mission-specific barriers. The book is organized in four sections consisting of detailed introductory and background content as well as a collection of in-depth space environment, materials processing, technology, and mission overviews by international experts. This book will detail how to design and optimize a space power system's performance for power-to-weight ratio, effectiveness at end of operational life (EOL) compared to beginning of operational life (BOL), and specific mission objectives and goals. This book outlines the knowledge required for practitioners and advanced students interested in learning about the background, materials, devices, environmental challenges, missions, and future for photovoltaics for space exploration. - Provides an update to state-of-the-art and emerging solar cell technologies - Features comprehensive coverage of solar cells for space exploration and materials/device technology options available - Explains the extreme conditions and mission challenges to overcome when using photovoltaics in space

Download or read book Advanced Micro and Nanomaterials for Photovoltaics written by and published by Elsevier. This book was released on 2019-05-25 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials are becoming increasingly important photovoltaic technologies from absorbers to contacts. This book is dedicated to describing the novel materials and technologies for photovoltaics that derive from these new and novel approaches in solar technologies. We have collected a set of renowned experts in their respective fields as authors and their expertise covers a broad set of areas including novel oxides, quantum dots, CZTS and organic solar cells, as well as light management and reliability testing. The organization of the book is divided into three sections; the first part deals with emerging photovoltaic absorbers and absorber approaches, the second part is focused on novel solar cell architectures and device concepts and components; and the last part is focused on their integration into module technologies. The first chapter is an introduction to the basics of solar cells technology facilitating an understanding by the non-expert of the following chapters. The book is intended for academics and professionals, at the research and R&D level in materials and devices, who are looking for opportunities for applications in the solar materials, devices and modules areas. Hopefully it will serve as a reference for students and professionals looking into the potential and development of novel photovoltaic technologies, researchers looking into the development of innovative projects, and teachers in the field of energy and sustainability. - Showcases a range of cutting-edge photovoltaic materials and devices, exploring their special properties and how they are best used - Assesses the challenges of fabricating solar cell devices using nanotechnology - Explores how producing cheaper modules, increasing reliability and increasing efficiency have led to new applications for photovoltaic devices

Download or read book Fundamentals of Solar Cell Design written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar cells are semiconductor devices that convert light photons into electricity in photovoltaic energy conversion and can help to overcome the global energy crisis. Solar cells have many applications including remote area power systems, earth-orbiting satellites, wristwatches, water pumping, photodetectors and remote radiotelephones. Solar cell technology is economically feasible for commercial-scale power generation. While commercial solar cells exhibit good performance and stability, still researchers are looking at many ways to improve the performance and cost of solar cells via modulating the fundamental properties of semiconductors. Solar cell technology is the key to a clean energy future. Solar cells directly harvest energy from the sun’s light radiation into electricity are in an ever-growing demand for future global energy production. Solar cell-based energy harvesting has attracted worldwide attention for their notable features, such as cheap renewable technology, scalable, lightweight, flexibility, versatility, no greenhouse gas emission, environment, and economy friendly and operational costs are quite low compared to other forms of power generation. Thus, solar cell technology is at the forefront of renewable energy technologies which are used in telecommunications, power plants, small devices to satellites. Aiming at large-scale implementation can be manipulated by various types used in solar cell design and exploration of new materials towards improving performance and reducing cost. Therefore, in-depth knowledge about solar cell design is fundamental for those who wish to apply this knowledge and understanding in industries and academics. This book provides a comprehensive overview on solar cells and explores the history to evolution and present scenarios of solar cell design, classification, properties, various semiconductor materials, thin films, wafer-scale, transparent solar cells, and so on. It also includes solar cells’ characterization analytical tools, theoretical modeling, practices to enhance conversion efficiencies, applications and patents.

Download or read book Advancements in Real Time Simulation of Power and Energy Systems written by Panos Kotsampopoulos and published by MDPI. This book was released on 2021-05-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power and energy systems are characterized by the wide integration of distributed generation, storage and electric vehicles, adoption of ICT solutions, and interconnection of different energy carriers and consumer engagement, posing new challenges and creating new opportunities. Advanced testing and validation methods are needed to efficiently validate power equipment and controls in the contemporary complex environment and support the transition to a cleaner and sustainable energy system. Real-time hardware-in-the-loop (HIL) simulation has proven to be an effective method for validating and de-risking power system equipment in highly realistic, flexible, and repeatable conditions. Controller hardware-in-the-loop (CHIL) and power hardware-in-the-loop (PHIL) are the two main HIL simulation methods used in industry and academia that contribute to system-level testing enhancement by exploiting the flexibility of digital simulations in testing actual controllers and power equipment. This book addresses recent advances in real-time HIL simulation in several domains (also in new and promising areas), including technique improvements to promote its wider use. It is composed of 14 papers dealing with advances in HIL testing of power electronic converters, power system protection, modeling for real-time digital simulation, co-simulation, geographically distributed HIL, and multiphysics HIL, among other topics.