Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Effectiveness and Impact of Corporate Average Fuel Economy CAFE Standards written by National Research Council and published by National Academies Press. This book was released on 2002-01-29 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since CAFE standards were established 25 years ago, there have been significant changes in motor vehicle technology, globalization of the industry, the mix and characteristics of vehicle sales, production capacity, and other factors. This volume evaluates the implications of these changes as well as changes anticipated in the next few years, on the need for CAFE, as well as the stringency and/or structure of the CAFE program in future years.

Download or read book Corporate Average Fuel Economy Standards Passenger Cars and Light Trucks Model Years 2017 2025 written by and published by . This book was released on 2012 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autonomous Vehicle Technology written by James M. Anderson and published by Rand Corporation. This book was released on 2014-01-10 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry appears close to substantial change engendered by “self-driving” technologies. This technology offers the possibility of significant benefits to social welfare—saving lives; reducing crashes, congestion, fuel consumption, and pollution; increasing mobility for the disabled; and ultimately improving land use. This report is intended as a guide for state and federal policymakers on the many issues that this technology raises.

Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.

Download or read book Annual Energy Outlook 2016 With Projections to 2040 written by Energy Dept., Energy Information Administration and published by Government Printing Office. This book was released on 2017-02-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Annual Energy Outlook 2016 presents long-term projections of energy supply, demand, and prices through 2040. The projections, focused on U.S. energy markets, are based on results from EIA's National Energy Modeling System which enables EIA to make projections under alternative, internally consistent sets of assumptions.

Download or read book Transportation Energy Data Book written by and published by . This book was released on 2005 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transitions to Alternative Vehicles and Fuels written by National Research Council and published by National Academies Press. This book was released on 2013-04-14 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a century, almost all light-duty vehicles (LDVs) have been powered by internal combustion engines operating on petroleum fuels. Energy security concerns about petroleum imports and the effect of greenhouse gas (GHG) emissions on global climate are driving interest in alternatives. Transitions to Alternative Vehicles and Fuels assesses the potential for reducing petroleum consumption and GHG emissions by 80 percent across the U.S. LDV fleet by 2050, relative to 2005. This report examines the current capability and estimated future performance and costs for each vehicle type and non-petroleum-based fuel technology as options that could significantly contribute to these goals. By analyzing scenarios that combine various fuel and vehicle pathways, the report also identifies barriers to implementation of these technologies and suggests policies to achieve the desired reductions. Several scenarios are promising, but strong, and effective policies such as research and development, subsidies, energy taxes, or regulations will be necessary to overcome barriers, such as cost and consumer choice.

Download or read book Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium and Heavy duty Engines and Vehicles written by and published by . This book was released on 2012 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Emissions Regulations and Exhaust Aftertreatment Systems written by John Kasab and published by SAE International. This book was released on 2020-08-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present a fundamental development of the science and engineering underlying the design of exhaust aftertreatment systems for automotive internal combustion engines. No pre-requisite knowledge of the field is required: our objective is to acquaint the reader, whom we expect to be new to the field of emissions control, with the underlying principles, control methods, common problems, and fuel effects on catalytic exhaust aftertreatment devices. We do this in hope that they can better understand the previous and current generations of emissions control, and improve upon them. This book is designed for the engineer, researcher, designer, student, or any combination of those, who is concerned with the control of automotive exhaust emissions. It includes discussion of theory and fundamentals applicable to hardware development.

Download or read book Human and Ecological Risk Assessment written by Dennis J. Paustenbach and published by John Wiley & Sons. This book was released on 2024-04-23 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the fundamentals of human risk assessment with this introduction and reference Human risk assessments are a precondition for virtually all industrial action or environmental regulation, all the more essential in a world where chemical and environmental hazards are becoming more abundant. These documents catalog potential environmental, toxicological, ecological, or other harms resulting from a particular hazard, from chemical spills to construction projects to dangerous workplaces. They turn on a number of variables, of which the most significant is the degree of human exposure to the hazardous agent or process. Human and Ecological Risk Assessment combines the virtues of a textbook and reference work to introduce and analyze these vital documents. Beginning with the foundational theory of human health risk assessment, it then supplies case studies and detailed analysis illustrating the practice of producing risk assessment documents. Fully updated and authored by leading authorities in the field, the result is an indispensable work. Readers of the second edition of Human and Ecological Risk Assessment will also find: Over 40 entirely new case studies reflecting the latest in risk assessment practice Detailed discussion of hazards including air emissions, contaminated food and soil, hazardous waste sites, and many more Case studies from multiple countries to reflect diverse international standards Human and Ecological Risk Assessment is ideal for professionals and advanced graduate students in toxicology, industrial hygiene, occupational medicine, environmental science, and all related subjects.

Download or read book Air Quality written by Wayne T. Davis and published by CRC Press. This book was released on 2021-02-23 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth edition of a bestseller, Air Quality provides students with a comprehensive overview of air quality, the science that continues to provide a better understanding of atmospheric chemistry and its effects on public health and the environment, and the regulatory and technological management practices employed in achieving air quality goals. Maintaining the practical approach that has made previous editions popular, the chapters have been reorganized, new material has been added, less relevant material has been deleted, and new images have been added, particularly those from Earth satellites. New in the Sixth Edition New graphics, images, and an appended list of unit conversions New problems and questions Presents all-new information on the state of air quality monitoring Provides the latest updates on air quality legislation in the United States Updates the effects of air pollution and CO2 on climate change Examines the effects of the latest changes in energy production and the related emissions and pollutants Offers broadened coverage of air pollutant emissions and air quality in a global context This new edition elucidates the challenges we face in our efforts to protect and enhance the quality of the nation’s air. It also highlights the growing global awareness of air quality issues, climate change, and public health concerns in the developing world. The breadth of coverage, review questions at the end of each chapter, extensive glossary, and list of readings place the tools for understanding into your students’ hands.

Download or read book The Future of Mobility written by Liisa Ecola and published by Rand Corporation. This book was released on 2015-07 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers developed two scenarios to envision the future of mobility in China in 2030. Economic growth, the presence of constraints on vehicle ownership and driving, and environmental conditions differentiate the scenarios. By making potential long-term mobility futures more vivid, the team sought to help decisionmakers at different levels of government and in the private sector better anticipate and prepare for change.

Download or read book Advanced Hybrid Powertrains for Commercial Vehicles written by Haoran Hu and published by SAE International. This book was released on 2021-04-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powertrains for commercial vehicles have evolved since the late nineteenth-century invention of the ICE. In the revised second edition of Advanced Hybrid Powertrains for Commercial Vehicles, the authors explore commercial powertrains through history from the ICE through the introduction of the hybrid powertrain in commercial vehicles. Readers are given an understanding of the ICE as well as the classification of commercial vehicle hybrid powertrains, the variety of energy storage systems, fuel-cell hybrid powertrain systems, and commercial vehicle electrification. The authors review the legislation of vehicle emissions and the regulation necessary to promote the production of fuel-efficient vehicles.

Download or read book Automotive Fuel Economy written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents realistic estimates for the level of fuel economy that is achievable in the next decade for cars and light trucks made in the United States and Canada. A source of objective and comprehensive information on the topic, this book takes into account real-world factors such as the financial conditions in the automotive industry, costs and benefits to consumers, and marketability of high-efficiency vehicles. The committee is composed of experts from the fields of science, technology, finance, and regulation and offers practical evaluations of technological improvements that could contribute to increased fuel efficiency. The volume also examines potential barriers to improvement, such as high production costs, regulations on safety and emissions, and consumer preferences. This practical book is of considerable interest to car and light truck manufacturers, policymakers, federal and state agencies, and the public.

Download or read book Driving Climate Change written by Daniel Sperling and published by Elsevier. This book was released on 2010-07-26 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change is one of the greatest challenges facing global society. The debate over what to do is confounded by the uncertain relationship between increasing greenhouse gas emissions and climate change, and the impact of those changes on nature and human civilization. Driving Climate Change will provide professionals and students alike with the latest information regarding greenhouse emissions while presenting the most up-to-date techniques for reducing these emissions. It will investigate three broad strategies for reducing greenhouse gas emissions: 1) reducing motorized travel, 2) shifting to less energy intensive modes, and 3) changing fuel and propulsion technologies. Findings will be presented by the leaders in the field with contributions from professors, researchers, consultants and engineers at the most prominent institutions - commercial, academic and federal - dealing with environmental research and policy. - Includes a comprehensive evaluation of current industrial practice - Provides technologically sound and manageable techniques for engineers, scientists and designers - Incorporates guidelines for a sustainable future