Download or read book The Car Hacker s Handbook written by Craig Smith and published by No Starch Press. This book was released on 2016-03-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern cars are more computerized than ever. Infotainment and navigation systems, Wi-Fi, automatic software updates, and other innovations aim to make driving more convenient. But vehicle technologies haven’t kept pace with today’s more hostile security environment, leaving millions vulnerable to attack. The Car Hacker’s Handbook will give you a deeper understanding of the computer systems and embedded software in modern vehicles. It begins by examining vulnerabilities and providing detailed explanations of communications over the CAN bus and between devices and systems. Then, once you have an understanding of a vehicle’s communication network, you’ll learn how to intercept data and perform specific hacks to track vehicles, unlock doors, glitch engines, flood communication, and more. With a focus on low-cost, open source hacking tools such as Metasploit, Wireshark, Kayak, can-utils, and ChipWhisperer, The Car Hacker’s Handbook will show you how to: –Build an accurate threat model for your vehicle –Reverse engineer the CAN bus to fake engine signals –Exploit vulnerabilities in diagnostic and data-logging systems –Hack the ECU and other firmware and embedded systems –Feed exploits through infotainment and vehicle-to-vehicle communication systems –Override factory settings with performance-tuning techniques –Build physical and virtual test benches to try out exploits safely If you’re curious about automotive security and have the urge to hack a two-ton computer, make The Car Hacker’s Handbook your first stop.

Download or read book Using the Phone Book written by Patricia Parrott Gundlach and published by . This book was released on 1980 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Camaro 2016 written by Larry Edsall and published by Motorbooks International. This book was released on 2016-08 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In anticipation of the Camaro's 50th anniversary, GM has prepared a significantly revised, sixth-generation car to take on Ford's latest 2015 Mustang. Featuring revised bodywork, a new chassis platform, expanded and new driveline options, and a reworked interior, the new Camaro raises the bar and again puts Mustang on the defensive. This book tells the complete story of the new sixth-generation Camaro, available just in time to celebrate the model's anniversary. Featuring exclusive interviews with engineers, designers, and other Camaro team members, as well as more than 300 behind-the-scenes photographs, the book offers readers an intimate Camaro experience"--Adapted from Amazon.com.

Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.

Download or read book Proceedings of the Scientific Practical Conference Research and Development 2016 written by K. V. Anisimov and published by Springer. This book was released on 2017-12-04 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme “Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014–2020.” It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.

Download or read book ACS Style Guide written by Anne M. Coghill and published by American Chemical Society. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the time since the second edition of The ACS Style Guide was published, the rapid growth of electronic communication has dramatically changed the scientific, technical, and medical (STM) publication world. This dynamic mode of dissemination is enabling scientists, engineers, and medicalpractitioners all over the world to obtain and transmit information quickly and easily. An essential constant in this changing environment is the requirement that information remain accurate, clear, unambiguous, and ethically sound.This extensive revision of The ACS Style Guide thoroughly examines electronic tools now available to assist STM writers in preparing manuscripts and communicating with publishers. Valuable updates include discussions of markup languages, citation of electronic sources, online submission ofmanuscripts, and preparation of figures, tables, and structures. In keeping current with the changing environment, this edition also contains references to many resources on the internet.With this wealth of new information, The ACS Style Guide's Third Edition continues its long tradition of providing invaluable insight on ethics in scientific communication, the editorial process, copyright, conventions in chemistry, grammar, punctuation, spelling, and writing style for any STMauthor, reviewer, or editor. The Third Edition is the definitive source for all information needed to write, review, submit, and edit scholarly and scientific manuscripts.

Download or read book Fundamentals of Nuclear Pharmacy written by Gopal B. Saha and published by Springer. This book was released on 2017-11-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently an estimated 17 million nuclear medicine procedures are performed each year in the US and constantly evolving, as new radiopharmaceuticals and imaging techniques are introduced for better diagnosis and treatment of human diseases. In keeping up with new developments, the Seventh Edition of Fundamentals of Nuclear Pharmacy chronicles the advancements in radiopharmaceuticals and their use in clinical applications. It discusses basic concepts such as the atom, radioactive decay, instrumentation and production of radionuclides, and explores the design, labeling, characteristics and quality control of radiopharmaceuticals. Radiation regulations and diagnostic and therapeutic applications of radiopharmaceuticals are detailed. Thoroughly updated, the Seventh Edition includes new topics such as alternative productions of 99Mo; production of 64Cu, 86Y, 89Zr, 177Lu, 223Ra; synthesis and clinical uses of new radiopharmaceuticals such as DaTscan, Xofigo, Amyvid, Neuraceq, Vizamyl, Axumin and 68Ga-DOTATATE; dosimetry of new radiopharmaceuticals; theranostic agents and translational medicine. It features numerous examples, diagrams, and images to further clarify the information and offers end- of-chapter questions to help readers assess their comprehension of the material. Recognized as a classic text on nuclear chemistry and pharmacy and acclaimed for its concise and easy-to-understand presentation, Fundamentals of Nuclear Pharmacy is an authoritative resource for nuclear medicine physicians, residents, students, and technologists.

Download or read book Applications of Process Engineering Principles in Materials Processing Energy and Environmental Technologies written by Shijie Wang and published by Springer. This book was released on 2017-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection offers new research findings, innovations, and industrial technological developments in extractive metallurgy, energy and environment, and materials processing. Technical topics included in the book are thermodynamics and kinetics of metallurgical reactions, electrochemical processing of materials, plasma processing of materials, composite materials, ionic liquids, thermal energy storage, energy efficient and environmental cleaner technologies and process modeling. These topics are of interest not only to traditional base ferrous and non-ferrous metal industrial processes but also to new and upcoming technologies, and they play important roles in industrial growth and economy worldwide.

Download or read book Welding Engineering written by David H. Phillips and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to all of the important topics in welding engineering. It covers a broad range of subjects and presents each topic in a relatively simple, easy to understand manner, with emphasis on the fundamental engineering principles. • Comprehensive coverage of all welding engineering topics • Presented in a simple, easy to understand format • Emphasises concepts and fundamental principles

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book Materials Processing Fundamentals written by Lifeng Zhang and published by Springer. This book was released on 2016-12-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection provides researchers and industry professionals with complete guidance on the synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Along with the fundamentals, it covers modeling of diverse phenomena in processes involving iron, steel, non-ferrous metals, and composites. It also goes on to examine second phase particles in metals, novel sensors for hostile-environment materials processes, online sampling and analysis techniques, and models for real-time process control and quality monitoring systems.

Download or read book A Comprehensive Guide to Solar Energy Systems written by Trevor Letcher and published by Academic Press. This book was released on 2018-05-17 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Guide to Solar Energy Systems: With Special Focus on Photovoltaic Systems, the most advanced and research focused text on all aspects of solar energy engineering, is a must have edition on the present state of solar technology, integration and worldwide distribution. In addition, the book provides a high-level assessment of the growth trends in photovoltaics and how investment, planning and economic infrastructure can support those innovations. Each chapter includes a research overview with a detailed analysis and new case studies that look at how recent research developments can be applied. Written by some of the most forward-thinking professionals, this book is an invaluable reference for engineers. - Contains analysis of the latest high-level research and explores real world application potential in relation to developments - Uses system international (SI) units and imperial units throughout to appeal to global engineers - Offers measurable data written by a world expert in the field on the latest developments in this fast moving and vital subject

Download or read book Lithium ion Batteries written by and published by . This book was released on 2019 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is the first machine-generated scientific book in chemistry published by Springer Nature. Serving as an innovative prototype defining the current status of the technology, it also provides an overview about the latest trends of lithium-ion batteries research. This book explores future ways of informing researchers and professionals. State-of-the-art computer algorithms were applied to: select relevant sources from Springer Nature publications, arrange these in a topical order, and provide succinct summaries of these articles. The result is a cross-corpora auto-summarization of current texts, organized by means of a similarity-based clustering routine in coherent chapters and sections. This book summarizes more than 150 research articles published from 2016 to 2018 and provides an informative and concise overview of recent research into anode and cathode materials as well as further aspects such as separators, polymer electrolytes, thermal behavior and modelling. With this prototype, Springer Nature has begun an innovative journey to explore the field of machine-generated content and to find answers to the manifold questions on this fascinating topic. Therefore it was intentionally decided not to manually polish or copy-edit any of the texts so as to highlight the current status and remaining boundaries of machine-generated content. Our goal is to initiate a broad discussion, together with the research community and domain experts, about the future opportunities, challenges and limitations of this technology."--Publisher's website.

Download or read book Quantitative Chemical Analysis written by Daniel C. Harris and published by Macmillan Higher Education. This book was released on 2015-05-29 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold standard in analytical chemistry, Dan Harris’ Quantitative Chemical Analysis provides a sound physical understanding of the principles of analytical chemistry and their applications in the disciplines

Download or read book Lithium Ion Batteries written by Masaki Yoshio and published by Springer Science & Business Media. This book was released on 2010-07-17 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here in a single source is an up-to-date description of the technology associated with the Li-Ion battery industry. It will be useful as a text for researchers interested in energy conversion for the direct conversion of chemical energy into electrical energy.

Download or read book The Complete Book of Locks and Locksmithing written by Bill Phillips and published by McGraw Hill Professional. This book was released on 2005-09-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you want to learn lockpicking or locksmithing, or choose locks that are virtually impossible to defeat, this classic will meet your needs. The top reference in the field since 1976, this book is perfect for everyone from beginners who want to master techniques step by illustrated step, to pros who need an up-to-date, comprehensive shop manual. The Sixth Edition features: •Complete, illustrated coverage from a master locksmith. •Techniques and tips for lockpicking and fixing. •Safe opening and servicing techniques. •Coverage of electronic and high-security mechanical locks. •Auto lock opening and servicing how-tos. •An all-new Registered Locksmith test. •How to conduct a home security survey •How to start and run a locksmithing business, or get hired as a locksmith.

Download or read book Plentiful Energy written by Charles E. Till and published by Createspace Independent Publishing Platform. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Integral Fast Reactor (IFR) is a fast reactor system developed at Argonne National Laboratory in the decade 1984 to 1994. The IFR project developed the technology for a complete system; the reactor, the entire fuel cycle and the waste management technologies were all included in the development program. The reactor concept had important features and characteristics that were completely new and fuel cycle and waste management technologies that were entirely new developments. The reactor is a "fast" reactor - that is, the chain reaction is maintained by "fast" neutrons with high energy - which produces its own fuel. The IFR reactor and associated fuel cycle is a closed system. Electrical power is generated, new fissile fuel is produced to replace the fuel burned, its used fuel is processed for recycling by pyroprocessing - a new development - and waste is put in final form for disposal. All this is done on one self-sufficient site.The scale and duration of the project and its funding made it the largest nuclear energy R and D program of its day. Its purpose was the development of a long term massive new energy source, capable of meeting the nation's electrical energy needs in any amount, and for as long as it is needed, forever, if necessary. Safety, non-proliferation and waste toxicity properties were improved as well, these three the characteristics most commonly cited in opposition to nuclear power.Development proceeded from success to success. Most of the development had been done when the program was abruptly cancelled by the newly elected Clinton Administration. In his 1994 State of the Union address the president stated that "unnecessary programs in advanced reactor development will be terminated." The IFR was that program.This book gives the real story of the IFR, written by the two nuclear scientists who were most deeply involved in its conception, the development of its R and D program, and its management.Between the scientific and engineering papers and reports, and books on the IFR, and the non-technical and often impassioned dialogue that continues to this day on fast reactor technology, we felt there is room for a volume that, while accurate technically, is written in a manner accessible to the non-specialist and even to the non-technical reader who simply wants to know what this technology is.