Download or read book Proceedings of the Sixth International Symposium on Dielectric Materials and Applications ISyDMA 6 written by Ashok Vaseashta and published by Springer Nature. This book was released on 2022-09-25 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses to the materials scientists, physicists, chemists, biologists, and electrical engineers engaged in fundamental and applied research or technical investigations on such materials. The goal of the International Symposium on Dielectric Materials and Applications conference series is to provide an innovative platform for key researchers, scientists from all over the world to exchange ideas and to hold wide ranging discussions on recent developments in dielectric materials and their new and emerging applications. The aim of ISyDMA meeting is to provide an international forum for the discussion of current research on high k-dielectric, electrical insulation, dielectric phenomena, and topics related to emerging applications.

Download or read book The World of Applied Electromagnetics written by Akhlesh Lakhtakia and published by Springer. This book was released on 2017-08-08 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commemorates four decades of research by Professor Magdy F. Iskander (Life Fellow IEEE) on materials and devices for the radiation, propagation, scattering, and applications of electromagnetic waves, chiefly in the MHz-THz frequency range as well on electromagnetics education. This synopsis of applied electromagnetics, stemming from the life and times of just one person, is meant to inspire junior researchers and reinvigorate mid-level researchers in the electromagnetics community. The authors of this book are internationally known researchers, including 14 IEEE fellows, who highlight interesting research and new directions in theoretical, experimental, and applied electromagnetics.

Download or read book Introduction to Antennas and RF Propagation Analysis written by Dean James Friesen and published by Artech House. This book was released on 2021-12-31 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical text gives engineers and technicians at all levels an easy-to-follow entry point into the subject of RF/EM wave propagation and antennas. While aimed primarily at those who are entering the field or transitioning from a related field, the book also helps experienced professionals obtain a more refined understanding of the various methodologies and processes in this area. The book covers the essentials, practices, technical details, and considerations needed to help a team of engineers design, install, and/or predict the technical performance of a new (or even existing) one-way, two-antenna (long radiating distance) RF communication system. The chapters are organized logically to walk you step by step through the application processes, showing you proven methods to bring about top performance, while also helping you factor in unanticipated variances, including those caused by the earth itself, earth’s gaseous atmosphere, rain, snow, hail, ice, ionospheric signal attenuation, and EM waves. This kind of understanding and consideration saves time, money, and much frustration in a project. With this book in hand, you will better understand RF/EM wave propagation and the technical vernacular used to describe it; become familiar with the various processes and considerations in analyzing, designing, and predicting the performance of new and existing antenna RF communications systems; and more confidently approach problem solving and possible solutions for reducing signal interference and loss. The chapter contents, while not sparing the reader exposure to radiated RF system design and analysis terminology, are written in a relaxed, conversational tone and easy-to-understand manner, making this a perfect learning tool for those entering or transitioning to this field, as well as an excellent supplement or foundational text for an instructional course. The book’s logically organized and easy-to-access chapter structure also facilitates its use as a bench reference for quick lookup or review.

Download or read book Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 written by Zainah Md Zain and published by Springer Nature. This book was released on 2020-07-07 with total page 1239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes research papers from the 11th National Technical Symposium on Unmanned System Technology. Covering a number of topics, including intelligent robotics, novel sensor technology, control algorithms, acoustics signal processing, imaging techniques, biomimetic robots, green energy sources, and underwater communication backbones and protocols, it will appeal to researchers developing marine technology solutions and policy-makers interested in technologies to facilitate the exploration of coastal and oceanic regions.

Download or read book Inverse Synthetic Aperture Radar Imaging With MATLAB Algorithms written by Caner Ozdemir and published by John Wiley & Sons. This book was released on 2021-03-24 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build your knowledge of SAR/ISAR imaging with this comprehensive and insightful resource The newly revised Second Edition of Inverse Synthetic Aperture Radar Imaging with MATLAB Algorithms covers in greater detail the fundamental and advanced topics necessary for a complete understanding of inverse synthetic aperture radar (ISAR) imaging and its concepts. Distinguished author and academician, Caner Özdemir, describes the practical aspects of ISAR imaging and presents illustrative examples of the radar signal processing algorithms used for ISAR imaging. The topics in each chapter are supplemented with MATLAB codes to assist readers in better understanding each of the principles discussed within the book. This new edition incudes discussions of the most up-to-date topics to arise in the field of ISAR imaging and ISAR hardware design. The book provides a comprehensive analysis of advanced techniques like Fourier-based radar imaging algorithms, and motion compensation techniques along with radar fundamentals for readers new to the subject. The author covers a wide variety of topics, including: Radar fundamentals, including concepts like radar cross section, maximum detectable range, frequency modulated continuous wave, and doppler frequency and pulsed radar The theoretical and practical aspects of signal processing algorithms used in ISAR imaging The numeric implementation of all necessary algorithms in MATLAB ISAR hardware, emerging topics on SAR/ISAR focusing algorithms such as bistatic ISAR imaging, polarimetric ISAR imaging, and near-field ISAR imaging, Applications of SAR/ISAR imaging techniques to other radar imaging problems such as thru-the-wall radar imaging and ground-penetrating radar imaging Perfect for graduate students in the fields of electrical and electronics engineering, electromagnetism, imaging radar, and physics, Inverse Synthetic Aperture Radar Imaging With MATLAB Algorithms also belongs on the bookshelves of practicing researchers in the related areas looking for a useful resource to assist them in their day-to-day professional work.

Download or read book Advances in Communication Devices and Networking written by Bikash Sharma and published by Springer Nature. This book was released on with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sensors for Everyday Life written by Octavian Adrian Postolache and published by Springer. This book was released on 2016-10-27 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors were developed to detect and quantify structures and functions of human body as well as to gather information from the environment in order to optimize the efficiency, cost-effectiveness and quality of healthcare services as well as to improve health and quality of life. This book offers an up-to-date overview of the concepts, modeling, technical and technological details and practical applications of different types of sensors. It also discusses the trends for the next generation of sensors and systems for healthcare settings. It is aimed at researchers and graduate students in the field of healthcare technologies, as well as academics and industry professionals involved in developing sensing systems for human body structures and functions, and for monitoring activities and health.

Download or read book Nanoelectronics Circuits and Communication Systems written by Vijay Nath and published by Springer Nature. This book was released on 2020-11-17 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected papers presented at the Fifth International Conference on Nanoelectronics, Circuits and Communication Systems (NCCS 2019). It covers a range of topics, including nanoelectronic devices, microelectronics devices, material science, machine learning, Internet of things, cloud computing, computing systems, wireless communication systems, advances in communication 5G and beyond. Further, it discusses VLSI circuits and systems, MEMS, IC design and testing, electronic system design and manufacturing, speech signal processing, digital signal processing, FPGA-based wireless communication systems and FPGA-based system design, Industry 4.0, e-farming, semiconductor memories, and IC fault detection and correction.

Download or read book Aperture Antennas for Millimeter and Sub Millimeter Wave Applications written by Artem Boriskin and published by Springer. This book was released on 2017-09-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the technology of millimetre waves and Terahertz (THz) antennas. It highlights the importance of moderate and high-gain aperture antennas as key devices for establishing point-to-point and point-to-multipoint radio links for far-field and near-field applications, such as high data-rate communications, intelligent transport, security imaging, exploration and surveillance systems. The book provides a comprehensive overview of the key antenna technologies developed for the mm wave and THz domains, including established ones – such as integrated lens antennas, advanced 2D and 3D horn antennas, transmit and reflect arrays, and Fabry-Perot antennas – as well as emerging metasurface antennas for near-field and far-field applications. It describes the pros and cons of each antenna technology in comparison with other available solutions, a discussion supplemented by practical examples illustrating the step-by-step implementation procedures for each antenna type. The measurement techniques available at these frequency ranges are also presented to close the loop of the antenna development cycle. In closing, the book outlines future trends in various antenna technologies, paving the way for further developments. Presenting content originating from the five-year ESF research networking program ‘Newfocus’ and co-authored by the most active and highly cited research groups in the domain of mm- and sub-mm-wave antenna technologies, the book offers a valuable guide for researchers and engineers in both industry and academia.

Download or read book Recent Wireless Power Transfer Technologies written by Pedro Pinho and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wireless Power Transfer concept is continuously and rapidly evolving and new challenges arise every day. As a result of these rapid changes, the need for up-to-date texts that address this growing field from an interdisciplinary perspective persists. This book, organized into ten chapters, presents interesting novel solutions in the exploitation of the near- and far-field techniques of wireless power transfer that will be used in the near future, as well as a bird's eye view of some aspects related to an emerging technological area that will change our lives and will change the paradigm of how we use electrical equipment. The book covers the theory and also the practical aspects of technology implementation in a way that is suitable for undergraduate and graduate-level students, as well as researchers and professional engineers.

Download or read book Breast Imaging written by Arshad M. Malik and published by BoD – Books on Demand. This book was released on 2017-10-04 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book watches out for the issues on making moves for chest radiology in carcinoma of the chest. It focuses on all parts of radiological approaches to manage the breast illness, be it light (optical), sound (ultrasound), interest, microwave, electrical impedance, blend of these modalities, and a section of the incredibly intense issues on computer-aided detection. The dedication of the eminent analysts in this book has incorporated a lot of energy for the people who are adequately drawn in with the clinical organization of this ailment and also for the students of radiology and surgery alike. This book will definitely be appreciated and well taken by the surgeons, radiologists, and other professionals involved in this field. The contributions are excellent in terms of diagnostic approach by radiological means and would certainly be a step forward in making it possible to reach to a conclusive diagnosis of breast cancer much before it becomes inoperable. The chapters included will further our knowledge and to the best of my belief will make things easier and definable in terms of diagnosis of breast cancer.

Download or read book 3D Printing of Sensors Actuators and Antennas for Low Cost Product Manufacturing written by Rupinder Singh and published by CRC Press. This book was released on 2023-02-10 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the 3D printing of sensors, actuators, and antennas and illustrates how manufacturers can create smart materials that can be effectively used to prepare low-cost products. The book also includes how to select the appropriate process for your manufacturing needs. 3D Printing of Sensors, Actuators, and Antennas for Low-Cost Product Manufacturing offers the most recent developments in 3D printing of sensors, actuators, and antennas for low-cost product manufacturing; the book highlights some of the commercially available low-cost 3D printing processes that have higher efficiency and accuracy. Fundamental principles and working methodologies are presented with a critical review of the past work involved and current trends with future predictions. It covers composite and polymeric materials widely used and specifically focuses on low-cost elements. Recent breakthroughs and advantages in product manufacturing when printing smart materials are also discussed. Manufacturing engineers, product designers, manufacturing industries, as well as graduate students, and research scholars will find this book very useful for their work and studies.

Download or read book Microwave and Millimeter wave Antenna Design for 5G Smartphone Applications written by Wonbin Hong and published by John Wiley & Sons. This book was released on 2023-01-05 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth and practical coverage of design considerations for 5G antennas In Microwave and Millimeter-wave Antenna Design for 5G Smartphone Applications, two distinguished researchers deliver a holistic, multidisciplinary approach to antenna design methodologies. The book covers approaches ranging from sub-6GHz microwave to the millimeter-wave spectrum, explaining how microwave and millimeter-wave 5G antennas coexist and function, both independently and collaboratively. The book offers coverage of key considerations for designing millimeter-wave 5G antennas within space-constrained mobile devices, as well as practical concerns, like cost, fabrication yield, and heat dissipation. Readers will also find explorations of the likely future directions of 5G antenna evolution, as well as: A thorough introduction to basic concepts in 5G FR1 Band mobile antenna design, including discussions of antenna placement, element design, and topologies Comprehensive explorations of antenna feeding mechanisms and impedance matching, including chassis considerations and effects Practical discussions of frequency tunable millimeter-wave 5G antenna-in-package Fulsome treatments of compact millimeter-wave 5G antenna solutions and millimeter-wave antenna-on-display technologies for 5G mobile devices Perfect for antenna, microwave, communications, and radio-frequency engineers, Microwave and Millimeter-wave Antenna Design for 5G Smartphone Applications will also benefit graduate students, policymakers, regulators, and researchers with an interest in communications and antennas.

Download or read book Recent Trends and Advances in Artificial Intelligence and Internet of Things written by Valentina E. Balas and published by Springer Nature. This book was released on 2019-11-19 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all the emerging trends in artificial intelligence (AI) and the Internet of Things (IoT). The Internet of Things is a term that has been introduced in recent years to define devices that are able to connect and transfer data to other devices via the Internet. While IoT and sensors have the ability to harness large volumes of data, AI can learn patterns in the data and quickly extract insights in order to automate tasks for a variety of business benefits. Machine learning, an AI technology, brings the ability to automatically identify patterns and detect anomalies in the data that smart sensors and devices generate, and it can have significant advantages over traditional business intelligence tools for analyzing IoT data, including being able to make operational predictions up to 20 times earlier and with greater accuracy than threshold-based monitoring systems. Further, other AI technologies, such as speech recognition and computer vision can help extract insights from data that used to require human review. The powerful combination of AI and IoT technology is helping to avoid unplanned downtime, increase operating efficiency, enable new products and services, and enhance risk management.

Download or read book Practical Microstrip and Printed Antenna Design written by Anil Pandey and published by Artech House. This book was released on 2019-03-31 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource presents antenna fundamentals balanced with the design of printed antennas. Over 70 antenna projects, along with design dimensions, design flows and antenna performance results are discussed, including antennas for wireless communication, 5G antennas and beamforming. Examples of smartphone antennas, MIMO antennas, aerospace and satellite remote sensing array antennas, automotive antennas and radar systems and many more printed antennas for various applications are also included. These projects include design dimensions and parameters that incorporate the various techniques used by industries and academia. This book is intended to serve as a practical microstrip and printed antenna design guide to cover various real-world applications. All Antenna projects discussed in this book are designed, analyzed and simulated using full-wave electromagnetic solvers. Based on several years of the author’s research in antenna design and development for RF and microwave applications, this book offers an in-depth coverage of practical printed antenna design methodology for modern applications.

Download or read book Low Temperature Co fired Ceramics for System in Package Applications at 122 GHz written by Bhutani, Akanksha and published by KIT Scientific Publishing. This book was released on 2019-10-17 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology For Electronics Photonics Biosensors And Emerging Technologies written by Faquir C Jain and published by World Scientific. This book was released on 2020-08-04 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume on Nanotechnology in Electronics, Photonics, Biosensors, and Emerging Technologies comprises research papers spanning from novel materials and devices, biosensors and bio-nano-systems, artificial intelligence, robotics and emerging technologies, to applications in each of these fields. These include blockchain improving security; ultra-sensitive Point of Care biosensor for detecting pathogeneses and detection of RNA-Virus infections; and advanced materials and devices such as ROM for anti-reverse engineering, FPGA bit-stream encryption, switching transients in memristors, and high-speed multi-bit logic and memories. Applications such as 3D-4D inkjet-printed wireless ultra-broadband modules for IOT, smarttag, and smart city applications are also included. In the area of material synthesis, carbon nanotube synthesis, III-nitride film growth via plasma-enhanced atomic layer deposition are noted. Threading dislocation behavior in InGaAs/GaAs (001) superlattice buffer layers brings a novel approach.Papers presented in this volume cover various aspects of high performance materials and devices for implementing high-speed electronic systems. This volume will serve as a useful reference for recent developments in nanotechnology.