Download or read book DC Microgrids written by Nikita Gupta and published by John Wiley & Sons. This book was released on 2022-05-26 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC MICROGRIDS Written and edited by a team of well-known and respected experts in the field, this new volume on DC microgrids presents the state-of-the-art developments and challenges in the field of microgrids for sustainability and scalability for engineers, researchers, academicians, industry professionals, consultants, and designers. The electric grid is on the threshold of a paradigm shift. In the past few years, the picture of the grid has changed dramatically due to the introduction of renewable energy sources, advancements in power electronics, digitalization, and other factors. All these megatrends are pointing toward a new electrical system based on Direct Current (DC). DC power systems have inherent advantages of no harmonics, no reactive power, high efficiency, over the conventional AC power systems. Hence, DC power systems have become an emerging and promising alternative in various emerging applications, which include distributed energy sources like wind, solar and Energy Storage System (ESS), distribution networks, smart buildings, remote telecom systems, and transport electrification like electric vehicles (EVs). All these applications are designed at different voltages to meet their specific requirements individually because of the lack of standardization. Thus, the factors influencing the DC voltages and system operation needed to be surveyed and analyzed, which include voltage standards, architecture for existing and emerging applications, topologies and control strategies of power electronic interfaces, fault diagnosis and design of the protection system, optimal economical operation, and system reliability.
Download or read book 2015 IEEE First International Conference on DC Microgrids ICDCM 2015 written by IEEE International Conference on Direct Current Microgrids and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of Seventh International Congress on Information and Communication Technology written by Xin-She Yang and published by Springer Nature. This book was released on 2022-07-11 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected high-quality research papers presented at the Seventh International Congress on Information and Communication Technology, held at Brunel University, London, on February 21–24, 2022. It discusses emerging topics pertaining to information and communication technology (ICT) for managerial applications, e-governance, e-agriculture, e-education and computing technologies, the Internet of Things (IoT) and e-mining. Written by respected experts and researchers working on ICT, the book offers a valuable asset for young researchers involved in advanced studies. The work is presented in four volumes.
Download or read book Mitigation of Negative Impedance Instabilities in DC Distribution Systems written by Deepak Kumar Fulwani and published by Springer. This book was released on 2016-10-01 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the mitigation of the destabilizing effects introduced by constant power loads (CPLs) in various non-isolated DC/DC converters and island DC microgrids using a robust non-linear sliding mode control (SMC) approach. This book validates theoretical concepts using real-time simulation studies and hardware implementations. Novel sliding mode controllers are proposed to mitigate negative impedance instabilities in DC/DC boost, buck, buck-boost, bidirectional buck-boost converters, and islanded DC microgrids. In each case, the condition for the large-signal stability of the converter feeding a CPL is established. An SMC-based nonlinear control scheme for an islanded DC microgrid feeding CPL dominated load is proposed so as to mitigate the destabilizing effect of CPL and to ensure system stability under various operating conditions. A limit on CPL power is also established to ensure system stability. For all proposed solutions, simulation studies and hardware implementations are provided to validate the effectiveness of the proposed sliding mode controllers.
Download or read book Proceedings of International Symposium on Sensor Networks Systems and Security written by Nageswara S.V. Rao and published by Springer. This book was released on 2018-05-23 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current trends that are dominating technology and society, including privacy, high performance computing in the cloud, networking and IoT, and bioinformatics. By providing chapters detailing accessible descriptions of the research frontiers in each of these domains, the reader is provided with a unique understanding of what is currently feasible. Readers are also given a vision of what these technologies can be expected to produce in the near future. The topics are covered comprehensively by experts in respective areas. Each section includes an overview that puts the research topics in perspective and integrates the sections into an overview of how technology is evolving. The book represents the proceedings of the International Symposium on Sensor Networks, Systems and Security, August 31 – September 2, 2017, Lakeland Florida.
Download or read book Renewable Power for Sustainable Growth written by Atif Iqbal and published by Springer Nature. This book was released on 2021-04-20 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers presented at the International Conference on Renewable Power (ICRP 2020), held during 13–14 July 2020 in Rajouri, Jammu, India. The book covers different topics of renewable energy sources in modern power systems. The book focusses on smart grid technologies and applications, renewable power systems including solar PV, solar thermal, wind, power generation, transmission and distribution, transportation electrification and automotive technologies, power electronics and applications in renewable power system, energy management and control system, energy storage in modern power system, active distribution network, artificial intelligence in renewable power systems, and cyber-physical systems and Internet of things in smart grid and renewable power.
Download or read book Micro grids written by Mahmoud Ghofrani and published by BoD – Books on Demand. This book was released on 2019-09-11 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of recent and emerging energy technologies in the existing electric grid requires modifications in several aspects of the grid, including its architecture, protection, operation, and control. Micro-grid provides a solution for integrating distributed energy resources such as renewable energy generation, energy storage systems, electric vehicles, controllable loads, etc. and delivers flexibility, security, and reliability by operating in both grid-connected and isolated modes. This book provides an overview of micro-grid solutions, applications, and implementations. State-of-the-art methods for micro-grid operation, optimization, and control are presented. Distributed energy resources and their interactions in micro-grids are also studied. In addition, micro-grid designs, architectures, and standards are covered, as are micro-grid protection strategies and schemes for different operation modes.
Download or read book Proceedings of Symposium on Power Electronic and Renewable Energy Systems Control written by Sankarsan Mohapatro and published by Springer Nature. This book was released on 2021-07-09 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at Symposium on Power Electronic and Renewable Energy Systems Control (PERESC 2020), which is held at the School of Electrical Sciences, IIT Bhubaneswar, Odisha, India, during 4–5 December 2020. The book covers original work in power electronics which has greatly enabled integration of renewable and distributed energy systems, control of electric machine drives, high voltage system control and operation. The book is highly useful for academicians, engineers, researchers and students to be familiar with the latest state of the art in power electronics technology and its applications.
Download or read book Modeling and Control Dynamics in Microgrid Systems with Renewable Energy Resources written by Ramesh C. Bansal and published by Academic Press. This book was released on 2023-11-23 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control Dynamics in Microgrid Systems with Renewable Energy Resources looks at complete microgrid systems integrated with renewable energy resources (RERs) such as solar, wind, biomass or fuel cells that facilitate remote applications and allow access to pollution-free energy. Designed and dedicated to providing a complete package on microgrid systems modelling and control dynamics, this book elaborates several aspects of control systems from classical approach to advanced techniques based on artificial intelligence. It captures the typical modes of operation of microgrid systems with distributed energy storage applications like battery, flywheel, electrical vehicles infrastructures that are integrated within microgrids with desired targets. More importantly, the techno-economics of these microgrid systems are well addressed to accelerate the process of achieving the SDG7 i.e., affordable and clean energy for all (E4ALL). This reference presents the latest developments including step by step modelling processes, data security and standards protocol for commissioning of microgrid projects, making this a useful tool for researchers, engineers and industrialists wanting a comprehensive reference on energy systems models. - Includes simulations with case studies and real-world applications of energy system models - Detailed systematic modeling with mathematical analysis is covered - Features possible operating scenarios with solutions to the encountered issues
Download or read book DC Microgrids ICDCM 2015 IEEE First International Conference on written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microgrids written by Mònica Aragüés-Peñalba and published by MDPI. This book was released on 2020-01-07 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical power systems are evolving at the generation, transmission, and distribution levels. At distribution level, small generating and storage units—the so-called distributed energy sources (DERs)—are being installed close to consumption sites. The expansion of DERs is empowering renewable energy source integration and, as a consequence, new actors are appearing in electrical systems. Among them, the prosumer is a game-changer; the fruit of the behavior transformation of the consumer who has not only the ability to consume power but also to produce it. Microgrids can be understood as DER installations that have the capability of both grid-connected and grid-isolated operation. During the last decades, there has been a significant deployment of microgrids (e.g., in countries like the United States, Switzerland, and Denmark) and a consequent increase in renewable energy generation. This is contributing to the decarbonization of electrical power systems. However, the variability and intermittency of renewable sources introduce uncertainty, which implies a more complex operation and control. Taking into account that existing and future planned microgrids are being/going to be interconnected to the current electrical network, challenges in terms of design, operation, and control at power system level need to be addressed, considering existing regulations.
Download or read book Advanced Hierarchical Control and Stability Analysis of DC Microgrids written by Andrei-Constantin Braitor and published by Springer Nature. This book was released on 2022-02-20 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces several novel contributions into the current literature. Firstly, given that microgrid topologies are paramount in theoretical analysis, the author has proposed a rigorous method of computing the network’s admittance matrix and developed to facilitate the stability analysis of DC microgrids supplying nonlinear loads. This unique approach enabled the factorisation of the admittance matrix in a particular way that facilitates a rigorous theoretical analysis for deriving the stability conditions. Secondly, author has proposed a unified control structure at the primary control layer that maintains the widely accepted droop-based approaches and additionally ensures crucial current- and voltage-limiting properties, thus offering an inherent protection to distributed energy resources. He has formalised the control design proofs using Lyapunov methods and nonlinear ultimate boundedness theory, for both parallel and meshed microgrid configurations. Moreover, he has developed a distributed secondary controller using a diffusive coupling communication network, on top of the primary control, to achieve voltage restoration and improve the power sharing. In this way, the author has formulated the complete hierarchical control scheme. In this high-order nonlinear setting, he has analytically proven closed-loop system stability of the overall system, for the first time, using two-time scale approaches and singular perturbation theory, by formulating rigorous theorems that introduce straightforward conditions that guide the system and control design and demonstrate system stability at the desired equilibrium point. In addition, the author has provided a straightforward algorithm for simple testing of system stability and explored from a graphical perspective by giving an interpretation to the effect of the nonlinear load onto the system performance and stability.
Download or read book Microgrids for Commercial Systems written by Palanisamy Sivaraman and published by John Wiley & Sons. This book was released on 2024-04-02 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: MICROGRIDS for COMMERCIAL SYSTEMS This distinct volume provides detailed information on the concepts and applications of the emerging field of microgrids for commercial applications, offering solutions in the design, installation, and operation of this new, cutting-edge technology. The microgrid is defined as Distributed Energy Resources (DER) and interconnected loads with clearly defined electrical boundaries that act as a single controllable entity concerning the grid as per IEEE standard 2030.7-2017. It provides an uninterrupted power supply to end-user loads with high reliability. Commercial systems like IT/ITES, shopping complexes, malls, the banking sector, hospitals, etc., need an uninterrupted input power supply with high reliability. Microgrids are more suitable for commercial systems to service their clients with no service discontinuity. The microgrid enables both connection and disconnection from the grid. That is, the microgrid can operate both in grid-connected and islanded modes of operation. The microgrid controller plays an important role in microgrid systems. It shall have an energy management system and real-time control functions that operate in the following conditions: both grid-connected and islanded modes of operation, automatic transfer from grid-connected mode to islanding mode, reconnection and re-synchronization from islanded mode to grid-connected mode, optimization of both real and reactive power generation and consumption by the energy management system, grid support, ancillary services, etc. Whenever a microgrid is in islanded mode, it will work as an autonomous system without a distribution grid power supply. In this mode of operation, fault in the transmission or distribution grid will not propagate into the microgrid. Whenever a microgrid operates in grid-connected mode, power flows bi-directionally between the distribution grid and microgrid at the point of interconnection. Hence, microgrids ensure the interrupted power supply to the end-user loads with high reliability. This book aims to bring together the design, installation, operation, and new research that has been carried out in the field of microgrid applications for commercial power systems.
Download or read book Distributed Computing and Optimization Techniques written by Sudhan Majhi and published by Springer Nature. This book was released on 2022-09-12 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces research presented at the International Conference on Distributed Computing and Optimization Techniques (ICDCOT–2021), a two-day conference, where researchers, engineers, and academicians from all over the world came together to share their experiences and findings on all aspects of distributed computing and its applications in diverse areas. The book includes papers on distributed computing, intelligent system, optimization method, mathematical modeling, fuzzy logic, neural networks, grid computing, load balancing, communication. It will be a valuable resource for students, academics, and practitioners in the industry working on distributed computing.
Download or read book Power Electronic Converter Configuration and Control for DC Microgrid Systems written by Jens Bo Holm-Nielsen and published by MDPI. This book was released on 2020-11-13 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DC/AC microgrid system is a crucial empowering technology for the integration of various types of renewable energy sources (RES) accompanied by a smart control approach to enhance the system reliability and efficiency. This book presents cutting-edge technology developments and recent investigations performed with the help of power electronics. Large-scale renewable energy integration presents challenges and issues for power grids. In particular, these issues include microgrid adaption to RES, AC machines, the new configuration of AC/DC converters, and electrification of domestic needs with optimal cost expenses from domestic standalone microgrids. Furthermore, this book elaborates cutting-edge developments in electric vehicle fast charging configuration, battery management, and control schemes with renewable energies through hardware-in-loop testing and validation for performance durability in real-time application. Overall, the book covers the diverse field of microgrids, allowing readers to adopt new technologies and prepare for future power demands with sustainable green engineering.
Download or read book Wide Bandgap Semiconductors for Power Electronics written by Peter Wellmann and published by John Wiley & Sons. This book was released on 2022-01-10 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide Bandgap Semiconductors for Power Electronic A guide to the field of wide bandgap semiconductor technology Wide Bandgap Semiconductors for Power Electronics is a comprehensive and authoritative guide to wide bandgap materials silicon carbide, gallium nitride, diamond and gallium(III) oxide. With contributions from an international panel of experts, the book offers detailed coverage of the growth of these materials, their characterization, and how they are used in a variety of power electronics devices such as transistors and diodes and in the areas of quantum information and hybrid electric vehicles. The book is filled with the most recent developments in the burgeoning field of wide bandgap semiconductor technology and includes information from cutting-edge semiconductor companies as well as material from leading universities and research institutions. By taking both scholarly and industrial perspectives, the book is designed to be a useful resource for scientists, academics, and corporate researchers and developers. This important book: Presents a review of wide bandgap materials and recent developments Links the high potential of wide bandgap semiconductors with the technological implementation capabilities Offers a unique combination of academic and industrial perspectives Meets the demand for a resource that addresses wide bandgap materials in a comprehensive manner Written for materials scientists, semiconductor physicists, electrical engineers, Wide Bandgap Semiconductors for Power Electronics provides a state of the art guide to the technology and application of SiC and related wide bandgap materials.
Download or read book DC DC Converters for Future Renewable Energy Systems written by Neeraj Priyadarshi and published by Springer Nature. This book was released on 2021-09-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the analysis and control of numerous DC-DC converters widely used in several applications such as standalone, grid integration, and motor drives-based renewable energy systems. The book provides extensive simulation and practical analysis of recent and advanced DC-DC power converter topologies. This self-contained book contributes to DC-DC converters design, control techniques, and industrial as well as domestic applications of renewable energy systems. This volume will be useful for undergraduate/postgraduate students, energy planners, designers, system analysis, and system governors.
