Download or read book 2015 Conference on Design of Circuits and Integrated Systems DCIS written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2015 Conference on Design of Circuits and Integrated Systems DCIS written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The Conference on Design of Circuits and Integrated Systems (DCIS) is an international meeting for researches in the highly active fields of micro and nano electronic circuits and integrated systems It provides an excellent forum to present and investigate the emerging challenges in modeling, design, implementation and test of circuits and systems The conference has emerged as a big event in these fields.
Download or read book 2015 Conference on Design of Circuits and Integrated Systems DCIS written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2015 Conference on Design of Circuits and Integrated Systems DCIS written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2016 Conference on Design of Circuits and Integrated Circuits DCIS written by IEEE Staff and published by . This book was released on 2016-11-23 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Integrated Circuits and Systems
Download or read book Design of Circuits and Integrated Systems written by J. Paulo Teixeira and published by . This book was released on 2007 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the XII Design of Circuits and Integrated Systems Conference DCIS 97 written by L. García Franquelo and published by . This book was released on 1997 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Implantable Sensors and Systems written by Guang-Zhong Yang and published by Springer. This book was released on 2018-03-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implantable sensing, whether used for transient or long-term monitoring of in vivo physiological, bio-electrical, bio-chemical and metabolic changes, is a rapidly advancing field of research and development. Underpinned by increasingly small, smart and energy efficient designs, they become an integral part of surgical prostheses or implants for both acute and chronic conditions, supporting optimised, context aware sensing, feedback, or stimulation with due consideration of system level impact. From sensor design, fabrication, on-node processing with application specific integrated circuits, to power optimisation, wireless data paths and security, this book provides a detailed explanation of both the theories and practical considerations of developing novel implantable sensors. Other topics covered by the book include sensor embodiment and flexible electronics, implantable optical sensors and power harvesting. Implantable Sensors and Systems – from Theory to Practice is an important reference for those working in the field of medical devices. The structure of the book is carefully prepared so that it can also be used as an introductory reference for those about to enter into this exciting research and developing field.
Download or read book Self powered Energy Harvesting Systems for Health Supervising Applications written by Albert Álvarez-Carulla and published by Springer Nature. This book was released on 2022-09-29 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the current and recent state-of-the-art developments in energy harvesting systems for health supervising applications. It explores the exciting potential of energy harvesting as a crosscutting field of research to intersect with other areas to envisage new products, solutions, and applications. Among all these new opportunities for synergy, there is a research area that fully matches the features offered by energy harvesting with its power supply's main needs- health supervising (HS), which consists of monitoring the health or operating conditions of anything, such as structures, buildings, public health, environment, etc. The book covers the hand in hand evolution towards a new paradigm: truly self-powered devices based on a single transducer acting as a sensor and as power source simultaneously and efficiently. This evolution is illustrated by the concept and implementation of novel state-of-the-art architecture for self-powered energy harvesting systems for applications that range from structural health monitoring to point-of-care medical devices.
Download or read book Fully Integrated Switched Capacitor PMU for IoT Nodes written by Ricardo Madeira and published by Springer Nature. This book was released on 2022-11-21 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a step-by-step methodology and system design that can be used to design a fully integrated PMU using SC DC-DC converters, for any CMOS technology. The authors discuss trade-offs between power density and efficiency of the methodology for the 130 nm CMOS technology, and how to implement it on other CMOS technologies. The book describes the state-of-the-art of fully or near-fully integrated SC DC-DC converters with multiple conversion ratios and the techniques used to enhance the overall performance of these converters. Coverage includes the trade-off between the number of conversion ratios and overall extracted efficiency from a supercapacitor, as well as the sizing of the converter cells according to the desired output power and maximum clock frequency. The authors also describe in detail the design of the fundamental blocks for the converter operation, which includes a secondary control loop using capacitance modulation by sensing the clock frequency.
Download or read book Inkjet Configurable Gate Array written by Mohammad Mashayekhi and published by Springer. This book was released on 2017-12-29 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis reports on an outstanding research advance in the development of Application Specific Printed Electronic (ASPE) circuits. It proposes the novel Inkjet-Configurable Gate Array (IGA) concept as a design-manufacturing method for the direct mapping of digital functions on top of new prefabricated structures. The thesis begins by providing details on the generation of the IGA bulk, and subsequently presents Drop-on-Demand configurable methodologies for the metallization of IGAs. Lastly, it demonstrates IGAs’ suitability for personalization and yield improvement, and reports on the integration of various circuits into IGA bulk. In addition to highlighting novel results, the thesis also offers a comprehensive introduction to printed electronics, from technology development, to design methods, tools and kits.
Download or read book Technological Innovation for Smart Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2017-04-19 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2017, held in Costa de Caparica, Portugal, in May 2017. The 46 revised full papers were carefully reviewed and selected from 95 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for smart systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks, computational intelligence, systems analysis, smart manufacturing systems, smart sensorial systems, embedded and real time systems, energy: management, energy: optimization, distributed infrastructure, solar energy, electrical machines, power electronics, and electronics.
Download or read book Machine Learning Paradigms written by George A. Tsihrintzis and published by Springer. This book was released on 2019-07-06 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the inaugural volume in the new Springer series on Learning and Analytics in Intelligent Systems. The series aims at providing, in hard-copy and soft-copy form, books on all aspects of learning, analytics, advanced intelligent systems and related technologies. These disciplines are strongly related and mutually complementary; accordingly, the new series encourages an integrated approach to themes and topics in these disciplines, which will result in significant cross-fertilization, research advances and new knowledge creation. To maximize the dissemination of research findings, the series will publish edited books, monographs, handbooks, textbooks and conference proceedings. This book is intended for professors, researchers, scientists, engineers and students. An extensive list of references at the end of each chapter allows readers to probe further into those application areas that interest them most.
Download or read book Technological Innovation for Life Improvement written by Luis M. Camarinha-Matos and published by Springer Nature. This book was released on 2020-04-29 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2020, held in Costa de Caparica, Portugal, in July 2020. The 20 full papers and 24 short papers presented were carefully reviewed and selected from 91 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for industry and service systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks; decisions systems; analysis and synthesis algorithms; communication systems; optimization systems; digital twins and smart manufacturing; power systems; energy control; power transportation; biomedical analysis and diagnosis; and instrumentation in health.
Download or read book Intelligent Autonomous Systems 14 written by Weidong Chen and published by Springer. This book was released on 2017-02-10 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research advances, innovations, and visions in the field of robotics as presented by leading researchers, engineers, and practitioners from around the world at the 14th International Conference on Intelligent Autonomous Systems (IAS-14), held in Shanghai, China in July 2016. The contributions amply demonstrate that robots, machines and systems are rapidly achieving intelligence and autonomy, attaining more and more capabilities such as mobility and manipulation, sensing and perception, reasoning, and decision-making. They cover a wide range of research results and applications, and particular attention is paid to the emerging role of autonomous robots and intelligent systems in industrial production, which reflects their maturity and robustness. The contributions were selected by means of a rigorous peer-review process and highlight many exciting and visionary ideas that will further galvanize the research community and spur novel research directions. The series of biennial IAS conferences, which began in 1986, represents a premiere event in the field of robotics.
Download or read book Emerging Computer Technologies written by Gligor Risteski and published by İzmir Akademi Derneği. This book was released on 2021-11-18 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is rapid development and change in the field of computer science today. These affect all areas of life. Emerging topics in computer science are covered in this book. In the first chapter, there is a log data analysis case study that aims to understand Hadoop and MapReduce by example. In the second chapter, encrypted communication has been tried to be provided on IoT devices performing edge computing. In this way, it is aimed to make communication secure. Arduino is used as an IoT device. In the encryption process, AES encryption is used with 128-bit and 256-bit key lengths. The third chapter presents a more secure connection between the NodemCU and Blynk, using the AES algorithm. it is aimed to prevent a vulnerability in the connection of Google Home devices with IoT during the Blynk IoT connection phase. The next chapter presents a methodological tool based on an evaluation framework for integration of digital games into education (MEDGE), expanded by adding additional information from the students, MEDGE+. The fifth and last chapter proposes a disaster management system utilising machine learning called DTDMS that is used to support decision-making mechanisms.
