Download or read book 2015 16th International Conference on Thermal Mechanical and Multi Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE written by IEEE Staff and published by . This book was released on 2015-04-19 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: EuroSimE addresses the results of both fundamental research and industrial application in the fields of thermal, mechanical and multiphysics simulation and experiments in microelectronics and microsystems
Download or read book 2015 16th International Conference on Thermal Mechanical and Multi Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2015 written by and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation, EuroSimE addresses the results of both fundamental research and industrial application in the fields of thermal, mechanical and multiphysics simulation and experiments in microelectronics and microsystems
Download or read book Thermal Mechanical and Multi Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2015 16th International Conference on written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability of Organic Compounds in Microelectronics and Optoelectronics written by Willem Dirk van Driel and published by Springer Nature. This book was released on 2022-01-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive reference into the critical subject of failure and degradation in organic materials, used in optoelectronics and microelectronics systems and devices. Readers in different industrial sectors, including microelectronics, automotive, lighting, oil/gas, and petrochemical will benefit from this book. Several case studies and examples are discussed, which readers will find useful to assess and mitigate similar failure cases. More importantly, this book presents methodologies and useful approaches in analyzing a failure and in relating a failure to the reliability of materials and systems.
Download or read book Prognostics and Health Management of Electronics written by Michael G. Pecht and published by John Wiley & Sons. This book was released on 2018-08-15 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable guide for engineers and data scientists in design, testing, operation, manufacturing, and maintenance A road map to the current challenges and available opportunities for the research and development of Prognostics and Health Management (PHM), this important work covers all areas of electronics and explains how to: assess methods for damage estimation of components and systems due to field loading conditions assess the cost and benefits of prognostic implementations develop novel methods for in situ monitoring of products and systems in actual life-cycle conditions enable condition-based (predictive) maintenance increase system availability through an extension of maintenance cycles and/or timely repair actions; obtain knowledge of load history for future design, qualification, and root cause analysis reduce the occurrence of no fault found (NFF) subtract life-cycle costs of equipment from reduction in inspection costs, downtime, and inventory Prognostics and Health Management of Electronics also explains how to understand statistical techniques and machine learning methods used for diagnostics and prognostics. Using this valuable resource, electrical engineers, data scientists, and design engineers will be able to fully grasp the synergy between IoT, machine learning, and risk assessment.
Download or read book Micro and Nano Scale NMR written by Jens Anders and published by John Wiley & Sons. This book was released on 2018-05-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This must-have book is the first self-contained summary of recent developments in the field of microscale nuclear magnetic resonance hardware, covering the entire technology from miniaturized detectors, the signal processing chain, and detection sequences. Chapters cover the latest advances in interventional NMR and implantable NMR sensors, as well as in using CMOS technology to manufacture miniaturized, highly scalable NMR detectors for NMR microscopy and high-throughput arrays of NMR spectroscopy detectors.
Download or read book Sensor Systems Simulations written by Willem Dirk van Driel and published by Springer. This book was released on 2019-06-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers various technical outcomes from the EU-project IoSense. The authors discuss sensor integration, including LEDs, dust sensors, LIDAR for automotive driving and 8 more, demonstrating their use in simulations for the design and fabrication of sensor systems. Readers will benefit from the coverage of topics such as sensor technologies for both discrete and integrated innovative sensor devices, suitable for high volume production, electrical, mechanical, security and software resources for integration of sensor system components into IoT systems and IoT-enabling systems, and IoT sensor system reliability. Describes from component to system level simulation, how to use the available simulation techniques for reaching a proper design with good performance; Explains how to use simulation techniques such as Finite Elements, Multi-body, Dynamic, stochastics and many more in the virtual design of sensor systems; Demonstrates the integration of several sensor solutions (thermal, dust, occupancy, distance, awareness and more) into large-scale system solutions in several industrial domains (Lighting, automotive, transport and more); Includes state-of-the-art simulation techniques, both multi-scale and multi-physics, for use in the electronic industry.
Download or read book Solid State Lighting Reliability Part 2 written by Willem Dirk van Driel and published by Springer. This book was released on 2017-07-11 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past four years we have witnessed rapid development in technology and significant market penetration in many applications for LED systems. New processes and new materials have been introduced; new standards and new testing methods have been developed; new driver, control and sensing technologies have been integrated; and new and unknown failure modes have also been presented. In this book, Solid State Lighting Reliability Part 2, we invited the experts from industry and academia to present the latest developments and findings in the LED system reliability arena. Topics in this book cover the early failures and critical steps in LED manufacturing; advances in reliability testing and standards; quality of colour and colour stability; degradation of optical materials and the associated chromaticity maintenance; characterization of thermal interfaces; LED solder joint testing and prediction; common failure modes in LED drivers; root causes for lumen depreciation; corrosion sensitivity of LED packages; reliability management for automotive LEDs, and lightning effects on LEDs. This book is a continuation of Solid State Lighting Reliability: Components to Systems (published in 2013), which covers reliability aspects ranging from the LED to the total luminaire or system of luminaires. Together, these two books are a full set of reference books for Solid State Lighting reliability from the performance of the (sub-) components to the total system, regardless its complexity.
Download or read book Thermal and Electro thermal System Simulation 2020 written by Márta Rencz and published by MDPI. This book was released on 2021-01-12 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, edited by Prof. Marta Rencz and Prof Andras Poppe, Budapest University of Technology and Economics, and by Prof. Lorenzo Codecasa, Politecnico di Milano, collects fourteen papers carefully selected for the “thermal and electro-thermal system simulation” Special Issue of Energies. These contributions present the latest results in a currently very “hot” topic in electronics: the thermal and electro-thermal simulation of electronic components and systems. Several papers here proposed have turned out to be extended versions of papers presented at THERMINIC 2019, which was one of the 2019 stages of choice for presenting outstanding contributions on thermal and electro-thermal simulation of electronic systems. The papers proposed to the thermal community in this book deal with modeling and simulation of state-of-the-art applications which are highly critical from the thermal point of view, and around which there is great research activity in both industry and academia. In particular, contributions are proposed on the multi-physics simulation of families of electronic packages, multi-physics advanced modeling in power electronics, multiphysics modeling and simulation of LEDs, batteries and other micro and nano-structures.
Download or read book Special Section Thermal Mechanical and Multi physics Simulation and Experiments in Micro electronics and Micro systems EuroSimE 2015 written by Artur Wymysłowski and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Towards Autonomous Robotic Systems written by Lyuba Alboul and published by Springer. This book was released on 2016-06-24 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th Annual Conference on Towards Autonomous Robotics, TAROS 2016, held in Sheffield UK, in June/July 2016. The 23 revised full papers presented together with 15 short papers were carefully reviewed and selected from 56 submissions. The overall program covers various aspects of robotics, including navigation, planning, sensing and perception, flying and swarm robots, ethics, humanoid robotics, human-robot interaction, and social robotics.
Download or read book Advanced Microsystems for Automotive Applications 2015 written by Tim Schulze and published by Springer. This book was released on 2015-06-30 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the proceedings of the AMAA 2015 conference, Berlin, Germany. The topical focus of the 2015 conference lies on smart systems for green and automated driving. The automobile of the future has to respond to two major trends, the electrification of the drivetrain, and the automation of the transportation system. These trends will not only lead to greener and safer driving but re-define the concept of the car completely, particularly if they interact with each other in a synergetic way as for autonomous parking and charging, self-driving shuttles or mobile robots. Key functionalities like environment perception are enabled by electronic components and systems, sensors and actuators, communication nodes, cognitive systems and smart systems integration. The book will be a valuable read for research experts and professionals in the automotive industry but the book may also be beneficial for graduate students.
Download or read book Studies into Additive Manufacturing for In Space Manufacturing written by Rani Elhajjar and published by SAE International. This book was released on 2016-08-11 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) for space exploration has become a growing opportunity as long-range space missions evolve. In partnership with the National Space Grant Foundation and NASA, students from the University of Wisconsin-Milwaukee participated in the 2014-15 X-Hab Academic Innovation Challenge, with participants tasked with developing new AM solutions that would be recyclable with minimal loss in mechanical properties. The teams investigated materials, characterization, testing, modeling, and tool development, including the ability to employ reusable carbon-fiber tension ties. The tools developed show that it is possible to employ thermoplastic polymer materials fabricated using AM together with reusable and flexible high-performance carbon-fiber-based composite ties. The AM-printed part is completely recyclable. The carbon-fiber composite ties are repurposed into new structural configurations without loss in properties. The results of this project are now published by SAE International. Studies into Additive Manufacturing for In-Space Manufacturing is a series of interconnected papers that explore: Lessons learned in processing of recycled thermoplastic filaments The criticality of process control on the print process The effects of orientation angles and print parameters on mechanical behavior Microstructural analysis Case studies of tools included in the spacecraft's toolbox
Download or read book Multifunctional Epoxy Resins written by Nishar Hameed and published by Springer Nature. This book was released on 2023-01-01 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consolidates information about multifunctional epoxy as a frontier material, its composites, engineering and applications in a very detailed manner that encompasses the entire spectrum of up-to-date literature citations, current market trends and patents. It highlights latest experimental and theoretical studies on the atypical properties of epoxy resins such as self-healing, thermally and electrically conductivity; and its applications in devices where there is reliance on unsustainable sourced inorganic materials with comparable properties. It caters to polymer chemists, physicists and engineers who are interested in the field of next generation epoxy polymers.
Download or read book Electronic Enclosures Housings and Packages written by Frank Suli and published by Woodhead Publishing. This book was released on 2018-11-15 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Enclosures, Housings and Packages considers the problem of heat management for electronics from an encasement perspective. It addresses enclosures and their applications for industrial electronics, as well as LED lighting solutions for stationary and mobile markets. The book introduces fundamental concepts and defines dimensions of success in electrical enclosures. Other chapters discuss environmental considerations, shielding, standardization, materials selection, thermal management, product design principles, manufacturing techniques and sustainability. Final chapters focus on business fundamentals by outlining successful technical propositions and potential future directions. Introduces the concepts of materials recycling and sustainability to electronic enclosures Provides thorough coverage of all technical aspects relating to the design and manufacturing of electronic packaging Includes practical information on environmental considerations, shielding, standardization, materials selection, and more
Download or read book European Workshop on Structural Health Monitoring written by Piervincenzo Rizzo and published by Springer Nature. This book was released on 2021-01-08 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of structural health monitoring (SHM) and more broadly in the fields of smart materials and intelligent systems. The volume covers highly diverse topics, including signal processing, smart sensors, autonomous systems, remote sensing and support, UAV platforms for SHM, Internet of Things, Industry 4.0, and SHM for civil structures and infrastructures. The contributions, which are published after a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists. The contents of this volume reflect the outcomes of the activities of EWSHM (European Workshop on Structural Health Monitoring) in 2020.
Download or read book Silicon Sensors and Actuators written by Benedetto Vigna and published by Springer Nature. This book was released on 2022-04-12 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book thoroughly reviews the present knowledge on silicon micromechanical transducers and addresses emerging and future technology challenges. Readers will acquire a solid theoretical and practical background that will allow them to analyze the key performance aspects of devices, critically judge a fabrication process, and then conceive and design new ones for future applications. Envisioning a future complex versatile microsystem, the authors take inspiration from Richard Feynman’s visionary talk “There is Plenty of Room at the Bottom” to propose that the time has come to see silicon sensors as part of a “Feynman Roadmap” instead of the “More-than-Moore” technology roadmap. The sharing of the author’s industrially proven track record of development, design, and manufacturing, along with their visionary approach to the technology, will allow readers to jump ahead in their understanding of the core of the topic in a very effective way. Students, researchers, engineers, and technologists involved in silicon-based sensor and actuator research and development will find a wealth of useful and groundbreaking information in this book.
