Download or read book Design and Modeling of Mechanical Systems V written by Lassaad Walha and published by Springer Nature. This book was released on 2022-08-19 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 9th International Congress on Design and Modeling of Mechanical Systems (CMSM’2021), held on December 20-22, 2021, in Hammamet, Tunisia. It reports on research findings, advanced methods and industrial applications relating to mechanical systems, materials and structures, and machining. It covers vibration analysis, CFD modeling and simulation, intelligent monitoring and control, including applications related to industry 4.0 and additive manufacturing. Continuing on the tradition of the previous editions, and with a good balance of theory and practice, the book offers a timely snapshot, and a useful resource for both researchers and professionals in the field of design and modeling of mechanical systems.

Download or read book Advances in Acoustics and Vibration II written by Tahar Fakhfakh and published by Springer. This book was released on 2018-09-03 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Second International Conference on Acoustics and Vibration (ICAV2018), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held March 19-21, in Hammamet, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.

Download or read book Rapid Automation Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2019-03-01 with total page 1597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through expanded intelligence, the use of robotics has fundamentally transformed the business industry. Providing successful techniques in robotic design allows for increased autonomous mobility, which leads to a greater productivity and production level. Rapid Automation: Concepts, Methodologies, Tools, and Applications provides innovative insights into the state-of-the-art technologies in the design and development of robotics and their real-world applications in business processes. Highlighting a range of topics such as workflow automation tools, human-computer interaction, and swarm robotics, this multi-volume book is ideally designed for computer engineers, business managers, robotic developers, business and IT professionals, academicians, and researchers.

Download or read book 2014 10th France Japan 8th Europe Asia Congress on Mecatronics Mecatronics 2014 written by and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2014 10th France Japan 8th Europe Asia Congress on Mecatronics MECATRONICS written by IEEE Staff and published by . This book was released on 2014-11-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: MECATRONICS2014 Tokyo is the 10th edition of France Japan and 8th Europe Asia Congress on Mechatronics that brings together researchers active in the field of advanced mechatronics to discuss current developments of mechatronics, either in the research or in the educational field, mainly from Europe and Asia, but also from other continents since there is no frontier to the expansion of that domain The congress will be held at Tokyo Metropolitan University, Hachioji, Tokyo, Japan, on November 28 30, 2014 Detailed instructions can be found in Mecatronics2014 Tokyo website, http www sd tmu ac jp mecatronics2014

Download or read book Haptic Interfaces for Accessibility Health and Enhanced Quality of Life written by Troy McDaniel and published by Springer Nature. This book was released on 2019-12-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first resource to provide in-depth coverage on topical areas of assistive, rehabilitative, and health-related applications for haptic (touch-based) technologies. Application topics are grouped into thematic areas spanning haptic devices for sensory impairments, health and well-being, and physical impairments which are illustrated in this book. A diverse group of experts in the field were invited to contribute different chapters to provide complementary and multidisciplinary perspectives. Unlike other books on haptics, which focus on human haptic perception, specific modalities of haptics (e.g., realistic haptic rendering), or broadly cover the subfields of haptics, this book takes an application-oriented approach to present a tour of how the field of haptics has been advanced with respect to important, impactful thematic focuses. Under Theme 1 “Sensory Impairments”, haptics technologies to support individuals with sensory impairments is presented which includes: Spatial awareness in sensory impairments through touch; Haptically-assisted interfaces for persons with visual impairments; and Enabling learning experiences for visually impaired children by interaction design. Under Theme 2 “Haptics for Health and Well-Being”, haptics technologies aimed at supporting exercise and healthy aging will be covered including: Haptics in rehabilitation, exergames and health; Therapeutic haptics for mental health and well-being; and Applications of haptics in medicine. Under Theme 3 “Haptics for Physical Impairments”, haptics technologies for enhancing the quality of life for individuals with weakened/impaired limbs or neurological diseases impacting movement is targeted including: Assistive soft exoskeletons with pneumatic artificial muscles; Haptics for accessibility in rehabilitative hardware; and intelligent robotics and immersive displays for enhancing haptic interaction in physical rehabilitation environments. Engineers, scientists, and researchers working in the areas of haptics, multimedia, virtual/augmented/mixed-reality, human-computer interaction, assistive technologies, rehabilitative technologies, healthcare technologies, and/or actuator design will want to purchase this book. Advanced level students and hobbyists interested in haptics will also be interested in this book.

Download or read book Learning ROS for Robotics Programming written by Enrique Fernández and published by Packt Publishing Ltd. This book was released on 2015-08-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your one-stop guide to the Robot Operating System About This Book Model your robot on a virtual world and learn how to simulate it Create, visualize, and process Point Cloud information Easy-to-follow, practical tutorials to program your own robots Who This Book Is For If you are a robotic enthusiast who wants to learn how to build and program your own robots in an easy-to-develop, maintainable, and shareable way, this book is for you. In order to make the most of the book, you should have a C++ programming background, knowledge of GNU/Linux systems, and general skill in computer science. No previous background on ROS is required, as this book takes you from the ground up. It is also advisable to have some knowledge of version control systems, such as svn or git, which are often used by the community to share code. What You Will Learn Install a complete ROS Hydro system Create ROS packages and metapackages, using and debugging them in real time Build, handle, and debug ROS nodes Design your 3D robot model and simulate it in a virtual environment within Gazebo Give your robots the power of sight using cameras and calibrate and perform computer vision tasks with them Generate and adapt the navigation stack to work with your robot Integrate different sensors like Range Laser, Arduino, and Kinect with your robot Visualize and process Point Cloud information from different sensors Control and plan motion of robotic arms with multiple joints using MoveIt! In Detail If you have ever tried building a robot, then you know how cumbersome programming everything from scratch can be. This is where ROS comes into the picture. It is a collection of tools, libraries, and conventions that simplifies the robot building process. What's more, ROS encourages collaborative robotics software development, allowing you to connect with experts in various fields to collaborate and build upon each other's work. Packed full of examples, this book will help you understand the ROS framework to help you build your own robot applications in a simulated environment and share your knowledge with the large community supporting ROS. Starting at an introductory level, this book is a comprehensive guide to the fascinating world of robotics, covering sensor integration, modeling, simulation, computer vision, navigation algorithms, and more. You will then go on to explore concepts like topics, messages, and nodes. Next, you will learn how to make your robot see with HD cameras, or navigate obstacles with range sensors. Furthermore, thanks to the contributions of the vast ROS community, your robot will be able to navigate autonomously, and even recognize and interact with you in a matter of minutes. What's new in this updated edition? First and foremost, we are going to work with ROS Hydro this time around. You will learn how to create, visualize, and process Point Cloud information from different sensors. This edition will also show you how to control and plan motion of robotic arms with multiple joints using MoveIt! By the end of this book, you will have all the background you need to build your own robot and get started with ROS. Style and approach This book is an easy-to-follow guide that will help you find your way through the ROS framework. This book is packed with hands-on examples that will help you program your robot and give you complete solutions using ROS open source libraries and tools.

Download or read book Differential Inclusions written by J.-P. Aubin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: A great impetus to study differential inclusions came from the development of Control Theory, i.e. of dynamical systems x'(t) = f(t, x(t), u(t)), x(O)=xo "controlled" by parameters u(t) (the "controls"). Indeed, if we introduce the set-valued map F(t, x)= {f(t, x, u)}ueu then solutions to the differential equations (*) are solutions to the "differen tial inclusion" (**) x'(t)EF(t, x(t)), x(O)=xo in which the controls do not appear explicitely. Systems Theory provides dynamical systems of the form d x'(t)=A(x(t)) dt (B(x(t))+ C(x(t)); x(O)=xo in which the velocity of the state of the system depends not only upon the x(t) of the system at time t, but also on variations of observations state B(x(t)) of the state. This is a particular case of an implicit differential equation f(t, x(t), x'(t)) = 0 which can be regarded as a differential inclusion (**), where the right-hand side F is defined by F(t, x)= {vlf(t, x, v)=O}. During the 60's and 70's, a special class of differential inclusions was thoroughly investigated: those of the form X'(t)E - A(x(t)), x (0) =xo where A is a "maximal monotone" map. This class of inclusions contains the class of "gradient inclusions" which generalize the usual gradient equations x'(t) = -VV(x(t)), x(O)=xo when V is a differentiable "potential". 2 Introduction There are many instances when potential functions are not differentiable

Download or read book UNESCO science report written by UNESCO and published by UNESCO Publishing. This book was released on 2015-11-09 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are fewer grounds today than in the past to deplore a North‑South divide in research and innovation. This is one of the key findings of the UNESCO Science Report: towards 2030. A large number of countries are now incorporating science, technology and innovation in their national development agenda, in order to make their economies less reliant on raw materials and more rooted in knowledge. Most research and development (R&D) is taking place in high-income countries, but innovation of some kind is now occurring across the full spectrum of income levels according to the first survey of manufacturing companies in 65 countries conducted by the UNESCO Institute for Statistics and summarized in this report. For many lower-income countries, sustainable development has become an integral part of their national development plans for the next 10–20 years. Among higher-income countries, a firm commitment to sustainable development is often coupled with the desire to maintain competitiveness in global markets that are increasingly leaning towards ‘green’ technologies. The quest for clean energy and greater energy efficiency now figures among the research priorities of numerous countries. Written by more than 50 experts who are each covering the country or region from which they hail, the UNESCO Science Report: towards 2030 provides more country-level information than ever before. The trends and developments in science, technology and innovation policy and governance between 2009 and mid-2015 described here provide essential baseline information on the concerns and priorities of countries that could orient the implementation and drive the assessment of the 2030 Agenda for Sustainable Development in the years to come.

Download or read book Formation Control written by Hyo-Sung Ahn and published by Springer. This book was released on 2019-03-29 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph introduces recent developments in formation control of distributed-agent systems. Eschewing the traditional concern with the dynamic characteristics of individual agents, the book proposes a treatment that studies the formation control problem in terms of interactions among agents including factors such as sensing topology, communication and actuation topologies, and computations. Keeping pace with recent technological advancements in control, communications, sensing and computation that have begun to bring the applications of distributed-systems theory out of the industrial sphere and into that of day-to-day life, this monograph provides distributed control algorithms for a group of agents that may behave together. Unlike traditional control laws that usually require measurements with respect to a global coordinate frame and communications between a centralized operation center and agents, this book provides control laws that require only relative measurements and communications between agents without interaction with a centralized operator. Since the control algorithms presented in this book do not require any global sensing and any information exchanges with a centralized operation center, they can be realized in a fully distributed way, which significantly reduces the operation and implementation costs of a group of agents. Formation Control will give both students and researchers interested in pursuing this field a good grounding on which to base their work.

Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Flexible Multibody Dynamics written by O. A. Bauchau and published by Springer Science & Business Media. This book was released on 2010-10-23 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author developed this text over many years, teaching graduate courses in advanced dynamics and flexible multibody dynamics at the Daniel Guggenheim School of Aerospace Engineering of the Georgia Institute of Technology. The book presents a unified treatment of rigid body dynamics, analytical dynamics, constrained dynamics, and flexible multibody dynamics. A comprehensive review of numerical tools used to enforce both holonomic and nonholonomic constraints is presented. Advanced topics such as Maggi’s, index-1, null space, and Udwadia and Kalaba’s formulations are presented because of their fundamental importance in multibody dynamics. Methodologies for the parameterization of rotation and motion are discussed and contrasted. Geometrically exact beams and shells formulations, which have become the standard in flexible multibody dynamics, are presented and numerical aspects of their finite element implementation detailed. Methodologies for the direct solution of the index-3 differential-algebraic equations characteristic of constrained multibody systems are presented. It is shown that with the help of proper scaling procedures, such equations are not more difficult to integrate than ordinary differential equations. This book is illustrated with numerous examples and should prove valuable to both students and researchers in the fields of rigid and flexible multibody dynamics.

Download or read book Active Fault Tolerant Control Systems written by Mufeed Mahmoud and published by Springer Science & Business Media. This book was released on 2003-02-13 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technological systems rely on sophisticated control functions to meet increased performance requirements. For such systems, Fault Tolerant Control Systems (FTCS) need to be developed. Active FTCS are dependent on a Fault Detection and Identification (FDI) process to monitor system performance and to detect and isolate faults in the systems. The main objective of this book is to study and to validate some important issues in real-time Active FTCS by means of theoretical analysis and simulation. Several models are presented to achieve this objective, taking into consideration practical aspects of the system to be controlled, performance deterioration in FDI algorithms, and limitations in reconfigurable control laws.

Download or read book Engineering for Sustainable Development written by International Centre for Engineering Education and published by UNESCO Publishing. This book was released on 2021-03-02 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report highlights the crucial role of engineering in achieving each of the 17 SDGs. It shows how equal opportunities for all is key to ensuring an inclusive and gender balanced profession that can better respond to the shortage of engineers for implementing the SDGs. It provides a snapshot of the engineering innovations that are shaping our world, especially emerging technologies such as big data and AI, which are crucial for addressing the pressing challenges facing humankind and the planet. It analyses the transformation of engineering education and capacity-building at the dawn of the Fourth Industrial Revolution that will enable engineers to tackle the challenges ahead. It highlights the global effort needed to address the specific regional disparities, while summarizing the trends of engineering across the different regions of the world.

Download or read book World Intellectual Property Report written by World Intellectual Property Organization and published by WIPO. This book was released on 2015 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIPO's latest World Intellectual Property Report (WIPR) explores the role of IP at the nexus of innovation and economic growth, focusing on the impact of breakthrough innovations.

Download or read book Green skills and innovation for inclusive growth written by OECD and published by OECD Publishing. This book was released on 2015-07-23 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second ‘green skills’ forum organised by Cedefop and the OECD-LEED in February 2014 provided an open space for discussion between researchers, policy-makers, social partners and international organisations on skills development and training needs for a greener economy. The focus of this ...