Download or read book 2013 XXIV International Conference on Information Communication and Automation Technologies ICAT written by IEEE Staff and published by . This book was released on 2013-10-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of First International Conference on Computational Electronics for Wireless Communications written by Sanyog Rawat and published by Springer Nature. This book was released on 2022-01-03 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality papers presented at Proceedings of First International Conference on Computational Electronics for Wireless Communications (ICCWC 2021), held at National Institute of Technology, Kurukshetra, Haryana, India, during June 11–12, 2021. The book presents original research work of academics and industry professionals to exchange their knowledge of the state-of-the-art research and development in computational electronics with an emphasis on wireless communications. The topics covered in the book are radio frequency and microwave, signal processing, microelectronics and wireless networks.
Download or read book Internet of Things written by Fausto Pedro García Márquez and published by BoD – Books on Demand. This book was released on 2021-08-18 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet of Things (IoT) is a closed-loop system in which a set of sensors is connected to servers via a network. The data from sensors are stored in a database and then analysed by IoT analytics. The results are usually employed by either humans, machines, or software to make decisions about the operation of the system. This book provides an interface between the main disciplines of engineering/technology and the organizational, administrative, and planning capabilities of managing the IoT.
Download or read book HCI International 2023 Late Breaking Posters written by Constantine Stephanidis and published by Springer Nature. This book was released on 2023-12-11 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volme set CCIS 1957-1958 is part of the refereed proceedings of the 25th International Conference on Human-Computer Interaction, HCII 2023, which was held in Copenhagen, Denmark, in July 2023. A total of 5583 individuals from academia, research institutes, industry, and governmental agencies from 88 countries submitted contributions, and 1276 papers and 275 posters were included in the proceedings that were published just before the start of the conference. Additionally, 296 papers and 181 posters are included in the volumes of the proceedings published after the conference, as “Late Breaking Work” (papers and posters). The contributions thoroughly cover the entire field of human-computer interaction, addressing major advances in knowledge and effective use of computers in a variety of application areas.
Download or read book Advances in Emerging Trends and Technologies written by Miguel Botto-Tobar and published by Springer Nature. This book was released on 2019-10-18 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 1st International Conference on Advances in Emerging Trends and Technologies (ICAETT 2019), held in Quito, Ecuador, on 29–31 May 2019, jointly organized by Universidad Tecnológica Israel, Universidad Técnica del Norte, and Instituto Tecnológico Superior Rumiñahui, and supported by SNOTRA. ICAETT 2019 brought together top researchers and practitioners working in different domains of computer science to share their expertise and to discuss future developments and potential collaborations. Presenting high-quality, peer-reviewed papers, the book discusses the following topics: Technology Trends Electronics Intelligent Systems Machine Vision Communication Security e-Learning e-Business e-Government and e-Participation
Download or read book 26th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2016-06-17 with total page 2482 pages. Available in PDF, EPUB and Kindle. Book excerpt: 26th European Symposium on Computer Aided Process Engineering contains the papers presented at the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event held at Portorož Slovenia, from June 12th to June 15th, 2016. Themes discussed at the conference include Process-product Synthesis, Design and Integration, Modelling, Numerical analysis, Simulation and Optimization, Process Operations and Control and Education in CAPE/PSE. Presents findings and discussions from the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event
Download or read book Advances in Soft Computing written by Ildar Batyrshin and published by Springer. This book was released on 2019-01-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNAI 11288 and 11289 constitutes the proceedings of the 17th Mexican International Conference on Artificial Intelligence, MICAI 2018, held in Guadalajara, Mexico, in October 2018. The total of 62 papers presented in these two volumes was carefully reviewed and selected from 149 submissions. The contributions are organized in topical as follows: Part I: evolutionary and nature-inspired intelligence; machine learning; fuzzy logic and uncertainty management. Part II: knowledge representation, reasoning, and optimization; natural language processing; and robotics and computer vision.
Download or read book Technological Innovation for Industry and Service Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2019-04-29 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2019, held in Costa de Caparica, Portugal, in May 2019. The 36 revised full papers presented were carefully reviewed and selected from 73 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for industry and serivce systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative systems, collaboration and resilient systems, decision and optimization systems, assistive systems, smart environments, smart manufacturing, water monitoring systems, communication systems, and energy systems.
Download or read book Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications Proceedings of the 5th International Symposium on Experimental Mechanics and 9th Symposium on Optics in Industry ISEM SOI 2015 written by Amalia Martínez-García and published by Springer. This book was released on 2016-10-13 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers of the 5th International Symposium on Experimental Mechanics (5-ISEM) and the 9th Symposium on Optics in Industry (9-SOI), whose general theme is Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications. These symposia are organized by Centro de Investigaciones en Optica (CIO) and Mexican Academy for Optics (AMO), under the sponsorship of the Society of Experimental Mechanics (SEM) and other national and international Organizations; Symposia are interdisciplinary forums for engineers, technicians, researchers and managers involved in all fields of Optics, Opto-mechatronics, Mechanics and Mechanical Engineering. · Addresses a broad readership including graduate and postgraduate students, researchers, and engineers working in experimental mechanics and in the application of optical methods · Covers a broad spectrum of topics highlighting the use of optical methods in experimental mechanics, energy, and in the environment
Download or read book Permanent Magnet Synchronous Motor Drives for Gearless Traction Elevators written by Guoqiang Zhang and published by Springer Nature. This book was released on 2022-02-25 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the control strategies for gearless permanent magnet synchronous motor traction elevators. Both basic principles and experimental evaluation have been addressed. This is achieved by providing in-depth study on a number of major topics such as speed detection at low-speed operation, starting torque strategy based on dichotomy and staircase methods, fuzzy self-tuning method, MPC and ADRC, etc. The comprehensive and systematic treatment of control strategies for cost-effective gearless PMSM traction elevators and practical issues are the major features of the book, which is particularly suited for readers who are interested to learn the control strategies for cost-effective gearless PMSM traction elevators. The book benefits researchers, engineers, and graduate students in the fields of ac motor drives and control strategies for cost-effective gearless PMSM traction elevators, etc.
Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Gerd Wagner and published by Springer Nature. This book was released on 2023-02-10 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the 11th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2021) that was held as an online event, from July 7 to 9, 2021. The conference brought together researchers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. A selection was made after the conference, based also on the conference chairs assessment, reviewers’ assessment, quality of presentation and audience interest, so that this book includes the extended and revised versions of the very best papers of the conference.
Download or read book GPU based Parallel Implementation of Swarm Intelligence Algorithms written by Ying Tan and published by Morgan Kaufmann. This book was released on 2016-04-15 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: GPU-based Parallel Implementation of Swarm Intelligence Algorithms combines and covers two emerging areas attracting increased attention and applications: graphics processing units (GPUs) for general-purpose computing (GPGPU) and swarm intelligence. This book not only presents GPGPU in adequate detail, but also includes guidance on the appropriate implementation of swarm intelligence algorithms on the GPU platform. GPU-based implementations of several typical swarm intelligence algorithms such as PSO, FWA, GA, DE, and ACO are presented and having described the implementation details including parallel models, implementation considerations as well as performance metrics are discussed. Finally, several typical applications of GPU-based swarm intelligence algorithms are presented. This valuable reference book provides a unique perspective not possible by studying either GPGPU or swarm intelligence alone. This book gives a complete and whole picture for interested readers and new comers who will find many implementation algorithms in the book suitable for immediate use in their projects. Additionally, some algorithms can also be used as a starting point for further research. Presents a concise but sufficient introduction to general-purpose GPU computing which can help the layman become familiar with this emerging computing technique Describes implementation details, such as parallel models and performance metrics, so readers can easily utilize the techniques to accelerate their algorithmic programs Appeals to readers from the domain of high performance computing (HPC) who will find the relatively young research domain of swarm intelligence very interesting Includes many real-world applications, which can be of great help in deciding whether or not swarm intelligence algorithms or GPGPU is appropriate for the task at hand
Download or read book Safety and Reliability Safe Societies in a Changing World written by Stein Haugen and published by CRC Press. This book was released on 2018-06-15 with total page 4533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Safe Societies in a Changing World collects the papers presented at the 28th European Safety and Reliability Conference, ESREL 2018 in Trondheim, Norway, June 17-21, 2018. The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk management Safety and Reliability – Safe Societies in a Changing World will be invaluable to academics and professionals working in a wide range of industrial and governmental sectors: offshore oil and gas, nuclear engineering, aeronautics and aerospace, marine transport and engineering, railways, road transport, automotive engineering, civil engineering, critical infrastructures, electrical and electronic engineering, energy production and distribution, environmental engineering, information technology and telecommunications, insurance and finance, manufacturing, marine transport, mechanical engineering, security and protection, and policy making.
Download or read book Fundamentals of IoT Communication Technologies written by Rolando Herrero and published by Springer Nature. This book was released on 2021-06-23 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores all of the protocols and technologies essential to IoT communication mechanisms. Geared towards an upper-undergraduate or graduate level class, the book is presented from a perspective of the standard layered architecture with special focus on protocol interaction and functionality. The IoT protocols are presented and classified based on physical, link, network, transport and session/application layer functionality. The author also lets readers understand the impact of the IoT mechanisms on network and device performance with special emphasis on power consumption and computational complexity. Use cases – provided throughout – provide examples of IoT protocol stacks in action. The book is based on the author’s popular class “Fundamentals of IoT” at Northeastern University. The book includes examples throughout and slides for classroom use. Also included is a 'hands-on’ section where the topics discussed as theoretical content are built as stacks in the context of an IoT network emulator so readers can experiment.
Download or read book Dynamical Systems in Theoretical Perspective written by Jan Awrejcewicz and published by Springer. This book was released on 2018-09-01 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on theoretical aspects of dynamical systems in the broadest sense. It highlights novel and relevant results on mathematical and numerical problems that can be found in the fields of applied mathematics, physics, mechanics, engineering and the life sciences. The book consists of contributed research chapters addressing a diverse range of problems. The issues discussed include (among others): numerical-analytical algorithms for nonlinear optimal control problems on a large time interval; gravity waves in a reservoir with an uneven bottom; value distribution and growth of solutions for certain Painlevé equations; optimal control of hybrid systems with sliding modes; a mathematical model of the two types of atrioventricular nodal reentrant tachycardia; non-conservative instability of cantilevered nanotubes using the Cell Discretization Method; dynamic analysis of a compliant tensegrity structure for use in a gripper application; and Jeffcott rotor bifurcation behavior using various models of hydrodynamic bearings.
Download or read book Operations Logistics and Supply Chain Management written by Henk Zijm and published by Springer. This book was released on 2018-08-29 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of important trends and developments in logistics and supply chain research, making them available to practitioners, while also serving as a point of reference for academicians. Operations and logistics are cornerstones of modern supply chains that in turn are essential for global business and economics. The composition, character and importance of supply chains and networks are rapidly changing, due to technological innovations such as Information and Communication Technologies, Sensors and Robotics, Internet of Things, and Additive Manufacturing, to name a few (often referred to as Industry 4.0). Societal developments such as environmental consciousness, urbanization or the optimal use of scarce resources are also impacting how supply chain networks are configured and operated. As a result, future supply chains will not just be assessed in terms of cost-effectiveness and speed, but also the need to satisfy agility, resilience and sustainability requirements. To face these challenges, an understanding of the basic as well as more advanced concepts and recent innovations is essential in building competitive and sustainable supply chains and, as part of that, logistics and operations. These span multiple disciplines and geographies, making them interdisciplinary and international. Therefore, this book contains contributions and views from a variety of experts from multiple countries, and combines management, engineering as well as basic information technology and social concepts. In particular, it aims to: provide a comprehensive guide for all relevant and major logistics, operations, and supply chain management topics in teaching and business practice address three levels of expertise, i.e., concepts and principles at a basic (undergraduate, BS) level, more advanced topics at a graduate level (MS), and finally recent (state-of-the-art) developments at a research level. In particular the latter serve to present a window on current and future (potential) logistics innovations in the different thematic fields for both researchers and top business practitioners integrate a textbook approach with matching case studies for effective teaching and learning discuss multiple international perspectives in order to represent adequately the true global nature of operations, logistics and supply chains.
Download or read book Security Privacy and Anonymity in Computation Communication and Storage written by Guojun Wang and published by Springer. This book was released on 2017-12-11 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of 11 symposia and workshops held at the 10th International Conference on Security, Privacy and Anonymity in Computation, Communication, and Storage, SpaCCS 2017, held in Guangzhou, China, in December 2017. The total of 75 papers presented in this volume was carefully reviewed and selected from a total of 190 submissions to all workshops: UbiSafe 2017: The 9th IEEE International Symposium on UbiSafe Computing ISSR 2017: The 9th IEEE International Workshop on Security in e-Science and e-Research TrustData 2017: The 8th International Workshop on Trust, Security and Privacy for Big Data TSP 2017: The 7th International Symposium on Trust, Security and Privacy for Emerging Applications SPIoT 2017: The 6th International Symposium on Security and Privacy on Internet of Things NOPE 2017: The 5th International Workshop on Network Optimization and Performance Evaluation DependSys 2017: The Third International Symposium on Dependability in Sensor, Cloud, and Big Data Systems and Applications SCS 2017: The Third International Symposium on Sensor-Cloud Systems WCSSC 2017: The Second International Workshop on Cloud Storage Service and Computing MSCF 2017: The First International Symposium on Multimedia Security and Digital Forensics SPBD 2017: The 2017 International Symposium on Big Data and Machine Learning in Information Security, Privacy and Anonymity
